Hey guys. I just updated my rom to GSB v2.9 and the GPS will not connect. I tried GPS fix apps and nothing works. I cannot use my navigation either because the GPS wont connect. Please help. Thanks in advance.
funkymusic said:
Hey guys. I just updated my rom to GSB v2.9 and the GPS will not connect. I tried GPS fix apps and nothing works. I cannot use my navigation either because the GPS wont connect. Please help. Thanks in advance.
Click to expand...
Click to collapse
Have you tried a redownload of the ROM, comparing the MD5 Hash of the download, perform a FULL data and dalvik wipe and reflash the ROM, GAPPs and C2C if you use it?
roirraW "edor" ehT said:
Have you tried a redownload of the ROM, comparing the MD5 Hash of the download, perform a FULL data and dalvik wipe and reflash the ROM, GAPPs and C2C if you use it?
Click to expand...
Click to collapse
No I'm not sure what the md5 is so I didn't download that. I have tried redownloadind and performed the full wipe procedures. And may I ask what C2C is?
funkymusic said:
Hey guys. I just updated my rom to GSB v2.9 and the GPS will not connect. I tried GPS fix apps and nothing works. I cannot use my navigation either because the GPS wont connect. Please help. Thanks in advance.
Click to expand...
Click to collapse
Two things. First I've used GSB v2.9 and my GPS works just fine. "I tried GPS fix apps" is rather non-specific. There are at least a few of them out there and some of them do almost nothing. That being said, I agree that a full wipe/reflash is warranted.
GSB 3.0 is out, you can find it here: [ROM][4/25/2011] GSB v3.0 | GingerBread 2.3.3 [CM7.0.2 NIGHTLY]
The GPS fix is in the changelog.
CHANGELOG
7.0.2
* Common: Fix issue with missing built-in themes
* Common: Update bundled ROM Manager to latest version
* Supersonic: Actually fix GPS
* Supersonic: Fix proximity and light sensor
Click to expand...
Click to collapse
Neera said:
GSB 3.0 is out, you can find it here: [ROM][4/25/2011] GSB v3.0 | GingerBread 2.3.3 [CM7.0.2 NIGHTLY]
The GPS fix is in the changelog.
Click to expand...
Click to collapse
Thank you.
Neera said:
GSB 3.0 is out, you can find it here: [ROM][4/25/2011] GSB v3.0 | GingerBread 2.3.3 [CM7.0.2 NIGHTLY]
The GPS fix is in the changelog.
Click to expand...
Click to collapse
Doesn't the "supersonic" listed before the change mean that the change applies to the HTC supersonic phone, as opposed to the ones listed as "common" refer to changes that are common across the board?
dan46n2 said:
Doesn't the "supersonic" listed before the change mean that the change applies to the HTC supersonic phone, as opposed to the ones listed as "common" refer to changes that are common across the board?
Click to expand...
Click to collapse
I think that you're right. That said, GPS has been rock-solid on GSB for my phone as well. I was using it constantly last week on 2.9 while traveling and it was perfect, with very rapid lock, etc. Now, I did do a flash-over of 2.8 (which may have been flashed over 2.7 -I don't remember at this point.) You may want to try installing an older version (or Nandroid restore, if you already have it), see if GPS works, then flash 3.0 (and gapps, of course) over that with a Dalvik wipe.
Hi, researching for a family member here, so sort of new to the Aria forums (what's left of them).
Basically GPS is never locking on. This is new since the upgrade to 7.2 from 7.1 stable. From what I have read it at least WAS a known problem in the RCs, and i saw this thread with some flashable zips for other gps libraries. Does that sound like a solution, or does anyone have any other ideas?
Which zip would you go for first? I had said try the reverted cm one, but would it be better to just use stock?
Thanks for your help!
I'd suggest the stock libs first. If that doesn't work out try the reverted.
drumist said:
I'd suggest the stock libs first. If that doesn't work out try the reverted.
Click to expand...
Click to collapse
Thanks, worked with the reverted ones just fine.
i've fixed it with the free gps status , just change filtering option and change it back if you want , and it will lock fast
I am using Cyanogenmod 10.1 for Moto Atrix by Emerson Pinter on my MB860, the wifi does not work, not any wifi can be search.
But i install the CyanogenMod 10 for Moto Atrix by Emerson Pinter, the wifi work fine. Any one know how to fix it?
I dont know Emerson Pinter's email to tell him, and I found this xda forum but i cannot post on his thread.
Wow, really? How about you just look in the ROM thread? It's all been explained...
Not sure he'd appreciate random emails from random people, especially if the given issue has already been covered so many times...
Also, for future reference - it is extremely unwise (if not even stupid) to flash something and not even bother to find out what it is and what it does. CM10.1 is a highly experimental ROM. Again, this has been said countless times before.
yes, I know this rom is experimental and this phone is not my major mobile.
Also thanks Emerson Pinter. Just to share the issues what it is happened.
ybmabcd said:
I am using Cyanogenmod 10.1 for Moto Atrix by Emerson Pinter on my MB860, the wifi does not work, not any wifi can be search.
But i install the CyanogenMod 10 for Moto Atrix by Emerson Pinter, the wifi work fine. Any one know how to fix it?
I dont know Emerson Pinter's email to tell him, and I found this xda forum but i cannot post on his thread.
Click to expand...
Click to collapse
What CM10.1 build are you using?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
What CM10.1 build are you using?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
cm-10.1-20130720-UNOFFICIAL-epinter-olympus.zip < have wifi issues
cm-10.1-20130517-UNOFFICIAL-epinter-olympus.zip < not wifi issues
cm-10-20130421-UNOFFICIAL-epinter-olympus.zip < not wifi issues
thanks for reply!
Install the 20/07 version. Install the 3.1 kernel manually over it which is in epinter's CM10.1 thread (not on his first post and the pain I went through just to search it through posts is beyond words).
Also tell us which radio version are u using. It worked fine for me on AT&T's .33 and .37p radios.
dark_prince said:
Install the 20/07 version. Install the 3.1 kernel manually over it which is in epinter's CM10.1 thread (not on his first post and the pain I went through just to search it through posts is beyond words).
Also tell us which radio version are u using. It worked fine for me on AT&T's .33 and .37p radios.
Click to expand...
Click to collapse
I got it. fallback the baseband to 37P, wifi is come back.
tested for
cm-10.1-20130720-UNOFFICIAL-epinter-olympus.zip + baseband N_01.100.00R = no wifi
cm-10.1-20130720-UNOFFICIAL-epinter-olympus.zip + baseband-N_01.77.37P.zip = wifi ok
cm-10.1-20130517-UNOFFICIAL-epinter-olympus.zip + baseband N_01.100.00R = wifi ok
cm-10.1-20130517-UNOFFICIAL-epinter-olympus.zip + baseband-N_01.77.37P.zip = wifi ok
cm-10-20130421-UNOFFICIAL-epinter-olympus.zip + baseband N_01.100.00R = wifi ok
cm-10-20130421-UNOFFICIAL-epinter-olympus.zip + baseband-N_01.77.37P.zip = wifi ok
thanks for reply.
Feedback after using 20130804
Sorry I am too new to XDA so i cannot provide any response in development thread yet. I am now currently on epinter's CM10.1 of 2013-08-04. So far I don't experience any screen tearing or random reboot on this version. Wifi and GSM are working as well.
Additional information:
- Memory type: Hynix 54nm
- Panel: 0x740
- Tegra Revision: A04 Prime
- Tegrapart: 1100:100:800
- Baseband: N_01.100.00R
- Simcard plugged
- MicroSD plugged
Hope this helps a little.
Cyanogenmod 10.1
ybmabcd said:
I am using Cyanogenmod 10.1 for Moto Atrix by Emerson Pinter on my MB860, the wifi does not work, not any wifi can be search.
But i install the CyanogenMod 10 for Moto Atrix by Emerson Pinter, the wifi work fine. Any one know how to fix it?
I dont know Emerson Pinter's email to tell him, and I found this xda forum but i cannot post on his thread.
Click to expand...
Click to collapse
any one able to install rommanager.apk I for got to not reboot and install gapps and now I'm stuck lol.
any one useing 10.1 for moto atrix by Emerson Pinter
dnickel said:
any one able to install rommanager.apk I for got to not reboot and install gapps and now I'm stuck lol.
Click to expand...
Click to collapse
went with 10.1 no problems after got proper gapps installed.
all is well with my atrix now thank you.
Rom: cm-10.1-20130807-UNOFFICIAL-epinter-olympus.zip
Kernel: kernel-cm10.1-20130808_0352-epinter-olympus-hporch32.zip
My Atrix is running the above rom & kernel without any WIFI issue.
But it has the bluetooth problem, it can establish the communication, but there is no sound coming from my car bluetooth or my garmin device whenever I tried to make a phone call. Anyone experience the same issue on this 0807 rom?
REV HRD said:
But it has the bluetooth problem, it can establish the communication, but there is no sound coming from my car bluetooth or my garmin device whenever I tried to make a phone call. Anyone experience the same issue on this 0807 rom?
Click to expand...
Click to collapse
It's a known issue. BT audio works only for media, not for phone calls.
Wifi not working with latest ROM
ybmabcd said:
I am using Cyanogenmod 10.1 for Moto Atrix by Emerson Pinter on my MB860, the wifi does not work, not any wifi can be search.
But i install the CyanogenMod 10 for Moto Atrix by Emerson Pinter, the wifi work fine. Any one know how to fix it?
I dont know Emerson Pinter's email to tell him, and I found this xda forum but i cannot post on his thread.
Click to expand...
Click to collapse
First - thank a lot guys for the wonderful ROM!
I have similar problem with wifi, installed latest:
cm-10.1-20130824-UNOFFICIAL-epinter-olympus
gapps-jb-20130301b-olympus-signed
+
kernel-cm10.1-20130824_0307-epinter-olympus-hporch32
wifi was working for short time, and then - nothing.
I attach dmesg messages to this post, please help. The ROM is great, the only trouble is wifi for me.
lorcat said:
I have similar problem with wifi, installed latest:
cm-10.1-20130824-UNOFFICIAL-epinter-olympus
Click to expand...
Click to collapse
The 8/24th release uses an old WiFi driver which is not compatible with every Atrix out there. Have you tried 8/26th release? It uses the newer WiFi release. (you can check EPinter's page for details)
WalkerBR said:
The 8/24th release uses an old WiFi driver which is not compatible with every Atrix out there. Have you tried 8/26th release? It uses the newer WiFi release. (you can check EPinter's page for details)
Click to expand...
Click to collapse
Thanks! I have epinter's 26/08 release, both kernel and the ROM. Wifi works a little better, but far from ideal. Often Wifi connection disappears (good signal conditions) and I have to restart it. However at this point - the Wifi settings page gets stuck (turning on Wifi, bla bla settings are not responding, wait/kill dialog) and requires closing the Settings application. I find it interesting that upon fresh phone boot Wifi connection is established sometimes smoothly, sometimes not, however even if the connection is established - the troubles always happen later.
Just for those who will tell me to make wipe of /data, /cache, etc prior to the installation. This all has been done including formatting of /preinstall and /system.
Without Wifi and cable now I cannot attach the dmesg file, I will do it later from home.
lorcat said:
the Wifi settings page gets stuck (turning on Wifi, bla bla settings are not responding, wait/kill dialog) and requires closing the Settings application
Click to expand...
Click to collapse
For me, the Wi-Fi is stuck on "Turning On" and hasn't worked even once.
I am on 08/26 build, and I am using kernel-cm10.1-20130903_1952-epinter-olympus-hporch38.zip. I wiped everything I could wipe using TWRP before installing this rom and kernel (can use TWRP only, because my volume down key doesn't work anymore).
Anyone has any ideas about how to fix WiFi?
Thanks in advance.
n_sane said:
For me, the Wi-Fi is stuck on "Turning On" and hasn't worked even once.
I am on 08/26 build, and I am using kernel-cm10.1-20130903_1952-epinter-olympus-hporch38.zip. I wiped everything I could wipe using TWRP before installing this rom and kernel (can use TWRP only, because my volume down key doesn't work anymore).
Anyone has any ideas about how to fix WiFi?
Thanks in advance.
Click to expand...
Click to collapse
Did you properly flash it?
That build has a different wifi module than that kernel expexts, you need latest build with latest kernel
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Did you properly flash it?
Click to expand...
Click to collapse
I guess so. TWRP says everything went smoothly. The phone boots fine. Not sure what you mean by "properly" flashing. Am I missing something?
andresrivas said:
That build has a different wifi module than that kernel expexts, you need latest build with latest kernel
Click to expand...
Click to collapse
I doubt if there's a kernel that is released after 09/03. If yes, could you please point me to the latest kernel? Also, I believe 08/26 is the latest rom available on epinter's website.
Thanks for your responses.
deleted...
Hi,
I hope I'm in the right section for this.
Since I updated to Android 4.3 (latest HellyBean build), my phone crashes after a few screen orientation changes.
Does anyone know what the reason for this strange behaviour could be?
Thanks for your help!
Da Bozz said:
Hi,
I hope I'm in the right section for this.
Since I updated to Android 4.3 (latest HellyBean build), my phone crashes after a few screen orientation changes.
Does anyone know what the reason for this strange behaviour could be?
Thanks for your help!
Click to expand...
Click to collapse
You did full wipe before flashing the rom?
If this happening again and again then flash the rom again to check
Thanks for your response!
Yes, I did a full wipe, but I will try flashing it again.
Could this probably relate to build.prop mods?
Edit: Seems like a broken design was the problem. Activating the stock one fixed it, at least until now.
when I installed this rom in to my xperia s (lt26i) at first the wifi works great but for example when I rebooted my phone then wifi doesn't work att all and even the wifi icon in settings remained gray and doesn't became blue.:crying::crying::crying::crying:
please if any one know how to solve this problem, help me
pejman97 said:
when I installed this rom in to my xperia s (lt26i) at first the wifi works great but for example when I rebooted my phone then wifi doesn't work att all and even the wifi icon in settings remained gray and doesn't became blue.:crying::crying::crying::crying:
please if any one know how to solve this problem, help me
Click to expand...
Click to collapse
If when you go to settings->wifi it says "Wifi is turning on" or something relevant to that
you should reinstall rom and make sure you Factory Reset on CWM.
wifi issue
I did all the steps correctly (factory reset-wipe dalvik-wipe cache-format system-format data) but didn't work for me again
It's typically a kernel issue. See if there is another compatible kernel for PA for your phone.
wifi
es0tericcha0s said:
It's typically a kernel issue. See if there is another compatible kernel for PA for your phone.
Click to expand...
Click to collapse
thank, but where & how can I find the compatible kernels?
pejman97 said:
thank, but where & how can I find the compatible kernels?
Click to expand...
Click to collapse
I'm gonna take a wild guess and say in the forum for your phone where you got the rom from...Search in the PA thread. Surely others have tried different kernels there or search for others with wifi issues with that version and see if there's an easy fix.