Related
I recently went to change my ROM on my HTC amaze, but after I was finished installing it went to reboot and ever since no matter what I do, it just stays on the white htc screen. The only thing I can get to is into Recovery. I locked boot loader and unlocked it and after doing so I noticed it said S ON. How do I turn s off while stuck in recovery mode? Im using the ZurgRushTemp root but it says that I need my phone in usb debugging mode and I dont know how to do that in recovery mode. If I sound like a total idiot it's probably because I am. Previously I have unlocked boot loader and rooted my phone and downloaded other roms and it worked fine. I have no fricken clue what happened. Please help me.. How do I s off to install another rom while I can only get into recovery mode?
What recovery did you flash?
If its not 4EXT then you need to flash the kernel using fastboot.
Check out my hairless guinea pig
Double0EK said:
What recovery did you flash?
If its not 4EXT then you need to flash the kernel using fastboot.
Check out my hairless guinea pig
Click to expand...
Click to collapse
Im not quite sure what you mean by which recovery did I flash? Im using ClockworkMod Recovery v5.0.2.6 if that helps. What does it mean and how do I "flash the kernal using fastboot"?
ben200451 said:
Im not quite sure what you mean by which recovery did I flash? Im using ClockworkMod Recovery v5.0.2.6 if that helps. What does it mean and how do I "flash the kernal using fastboot"?
Click to expand...
Click to collapse
Alright slowly but surely I'm catching on to all this stuff.. I think. I found "Hasoon2000's HTC amaze all in one kit" on another fourm so im using that. So I want to flash a 4ext recovery? Then after that what? And do I want to flash it to stock telus kernal aswell? Goddamnit did I mess up big this time.
ben200451 said:
Alright slowly but surely I'm catching on to all this stuff.. I think. I found "Hasoon2000's HTC amaze all in one kit" on another fourm so im using that. So I want to flash a 4ext recovery? Then after that what? And do I want to flash it to stock telus kernal aswell? Goddamnit did I mess up big this time.
Click to expand...
Click to collapse
The bootloader screen reads
*** Unlocked ***
Ruby PVT SHIP S-ON RL
HBOOT-1.90.0006
eMMC-boot
just get the stock RUU for your phone. Re-lock your bootloader. Rename what you downloaded to PH85IMG.zip. place it in the root directory of your external SD card. reboot your phone into HBOOT and it should automatically flash the stock recovery and ROM. this WILL wipe your phone clean. then you can unlock the bootloader, root it, flash a custom recovery then a ROM of your choice.
NeoAndroid said:
just get the stock RUU for your phone. Re-lock your bootloader. Rename what you downloaded to PH85IMG.zip. place it in the root directory of your external SD card. reboot your phone into HBOOT and it should automatically flash the stock recovery and ROM. this WILL wipe your phone clean. then you can unlock the bootloader, root it, flash a custom recovery then a ROM of your choice.
Click to expand...
Click to collapse
What is PH85IMG.zip and where can I download it?
ben200451 said:
What is PH85IMG.zip and where can I download it?
Click to expand...
Click to collapse
Really?
If u don't know that, you've got some reading to do. Google it
_________________________
Am I on Candid Camera?
aha sorry I did, thanks for all the help. Well see if this works,
ben200451 said:
I recently went to change my ROM on my HTC amaze, but after I was finished installing it went to reboot and ever since no matter what I do, it just stays on the white htc screen. The only thing I can get to is into Recovery. I locked boot loader and unlocked it and after doing so I noticed it said S ON. How do I turn s off while stuck in recovery mode? Im using the ZurgRushTemp root but it says that I need my phone in usb debugging mode and I dont know how to do that in recovery mode. If I sound like a total idiot it's probably because I am. Previously I have unlocked boot loader and rooted my phone and downloaded other roms and it worked fine. I have no fricken clue what happened. Please help me.. How do I s off to install another rom while I can only get into recovery mode?
Click to expand...
Click to collapse
Unlocking the bootloader won't change your phone into s-off. So, what you see is correct.
Forget about ZergRush. It won't work, or necessary at all if you unlocked your bootloader, anyway.
Edit: I forgot to mention. Try 'adb logcat' to see if your phone even gets to the boot sequence. If you see your screen gets filled up with tons of stuff, hit control-c to stop it. Then enter adb logcat > logfile.txt to capture it. You can post it here for someone to take a look.
If you can get into bootloader and/or recovery, your phone isn't in a bad shape at all. If you can access your phone from a pc with adb or fastboot (which, you should have if you've unlocked your bootloader), there are things you can try.
1. boot your phone into recovery and see if you can access it through adb shell. Do you see a shell prompt ('$' or '#' sign)? On the phone, use the mount option to mount system and data partitions to see if they are mountable. You can use 'ls -l' on the shell prompt to look around, if you like.
2. If your phone is accessible, but not bootable, the first thing I would try is to flash a boot image. You probably have one sitting in the pc folder you used to unlock, or hanson's all-in-one tool has it.
3. If you flash a fresh boot image (kernel) and the phone still won't boot up, the next thing I would try is to restore from a nandroid backup. I'm sure you've made a backup before you started, right?
4. If the nandroid restore doesn't work, you can try flashing a stock rom like someone elese suggested. You just copy the zip file, which you download from the stock rom thread in the dev section, to the external sd card, rename it to PH85IMG.zip, and reboot your phone into the bootloader. The phone will detect the stock rom if it's there and asks you whether to install the update or not. Remember to download the correct file for your carrier.
5. If nothing works, come back here and post your result. I'm afraid your phone may have a corrupt nand memory...
I am having the problem I followed steps 1-5 of the post above.
using PH85IMG.zip in bootloader. It loades the image and checks. afterwards when it restarts it gets stuck on bootloader or HTC splash screen.
I am unlocked through HTC Dev
S-ON
rooted
on ext4 recovery
Sheng1988 said:
I am having the problem I followed steps 1-5 of the post above.
using PH85IMG.zip in bootloader. It loades the image and checks. afterwards when it restarts it gets stuck on bootloader or HTC splash screen.
I am unlocked through HTC Dev
S-ON
rooted
on ext4 recovery
Click to expand...
Click to collapse
What carrier are you on?
mobilicity phone but using on rogers.
also not sure if it matters
h.boot 1.93
Sheng1988 said:
mobilicity phone but using on rogers.
also not sure if it matters
h.boot 1.93
Click to expand...
Click to collapse
Were you on GB or ICS before this started happening? Or a custom ROM? Give me as much info as possible in one brief post.
original rom nandroid backup to sd card before flash
s-off through Juopunutbear
unlocked boot loader
ext4 recovery and rooted
flashed energy rom, wouldn't boot
tried to go back to stock but then internal sd card stopped working could not access anything except ext4 and fastboot
used PH85IMG.zip through bootloader still wouldn't boot
formatted internal sd card through ext4 (format everything including sd card)
re ran PH85IMG.zip in bootloader, everything checked out but could not pass htc screen
tried to relock bootloader got hard brick used unbricking project
S-ON
re-ran PH85IMG.zip still wouldn't boot past htc
unlocked bootloader through htc dev
ext4 recovery with all in one tool
rooted with tool
re-ran PH85IMG.zip and still won't get through htc screen
tried to flash kernel with all in one tool with boot img received from
OTA_RUBY_ICS_35_S_DAVE_CA_2.14.1800.6-1.45.1800.2_R_release_263099viknauioz1fkgotb
still stopped at htc screen
any help and all help is appreciated!
Sheng1988 said:
original rom nandroid backup to sd card before flash
s-off through Juopunutbear
unlocked boot loader
ext4 recovery and rooted
flashed energy rom, wouldn't boot
tried to go back to stock but then internal sd card stopped working could not access anything except ext4 and fastboot
used PH85IMG.zip through bootloader still wouldn't boot
formatted internal sd card through ext4 (format everything including sd card)
re ran PH85IMG.zip in bootloader, everything checked out but could not pass htc screen
tried to relock bootloader got hard brick used unbricking project
S-ON
re-ran PH85IMG.zip still wouldn't boot past htc
unlocked bootloader through htc dev
ext4 recovery with all in one tool
rooted with tool
re-ran PH85IMG.zip and still won't get through htc screen
tried to flash kernel with all in one tool with boot img received from
OTA_RUBY_ICS_35_S_DAVE_CA_2.14.1800.6-1.45.1800.2_R_release_263099viknauioz1fkgotb
still stopped at htc screen
any help and all help is appreciated!
Click to expand...
Click to collapse
You used the wrong image, went about using that ota file incorrectly as well, Oh boy, ite, let's keep our fingers crossed on this.
You said your hboot was 1.93.0002? Correct? If you're s-on, this may or may not work, lets hope it does, since's it practically your only hope, though I wonder what your cid currently is set to.
Since you did s-off, you should know how to use adb. Shut the phone off via battery pull, boot up into hboot then go into fastboot, using adb check your cid via this command: fastboot getvar cid
Let me know what it is when you're done, we'll work from there, hopefully we can get this done.
sorry, forgot to pull sd card so it ran the PH85IMG twice,
the cid is
11111111
Sheng1988 said:
sorry, forgot to pull sd card so it ran the PH85IMG twice,
the cid is
11111111
Click to expand...
Click to collapse
Cid is 11111111 and you're s-on? Lucky you, well download the mobilicity GB stock ruu exe file, reboot into fastboot and run the file to restore your phone to complete stock GB, hopefully it goes through, though I don't see why it wouldn't, if you're s-on, you'll have to relock your bootloader before doing this.
Thanks! hopefully it'll work
downloading the GB rom from
http://forum.xda-developers.com/showthread.php?p=27704071
going to relock bootloader with the amaze tool.
going to change the RUU to PH85IMG then pray it works!
I'll post an update in this thread, unfortunately the rom takes about 4 hours to download from file factory
Sheng1988 said:
Thanks! hopefully it'll work
downloading the GB rom from
http://forum.xda-developers.com/showthread.php?p=27704071
going to relock bootloader with the amaze tool.
going to change the RUU to PH85IMG then pray it works!
I'll post an update in this thread, unfortunately the rom takes about 4 hours to download from file factory
Click to expand...
Click to collapse
You can download the ruu from the ruu/ota thread in the same forum, the dev host upload by krook is much faster.
Do not change the name of that file, it's an exe file, you have to run it via a pc with your phone connected via usb cable in fastboot mode.
I'm S-on and running Conrom. I decided to relock and go back to stock to take the latest update.
After executing fastboot oem lock, my phone won't boot past the Hboot screen.
When I installed Conrom I temp flashed amon ra. After that my hboot said Tampered but everything worked great.
Now it says Tampered, Relocked, Security Warning.
How do I get back to the .12 OTA or Conrom for that matter?
Fastboot devices will return my serial number. Adb devices returns nothing.
Thanks!
Fastboot unlock. Or just S-Off.
Sent from my ADR6425LVW using Tapatalk 2
Thanks LS! Unlocking got me back to Conrom. Before I set everything up again I'd like to go back to .12.
I have the files; I just need to know how to do that. I have to be locked to run the ruu and locking is what got me in trouble.
Any idea how I need to proceed?
Chuck Snorus said:
Thanks LS! Unlocking got me back to Conrom. Before I set everything up again I'd like to go back to .12.
I have the files; I just need to know how to do that. I have to be locked to run the ruu and locking is what got me in trouble.
Any idea how I need to proceed?
Click to expand...
Click to collapse
you have to be on a stock hboot before re-locking. i would flash a stock hboot, then re-lock, and finally ruu.
EDIT: just saw you are still S-ON. I honestly forget the workarounds for being S-ON.
keolawills said:
you have to be on a stock hboot before re-locking. i would flash a stock hboot, then re-lock, and finally ruu.
EDIT: just saw you are still S-ON. I honestly forget the workarounds for being S-ON.
Click to expand...
Click to collapse
I *think* I'm on a stock hboot. I never purposely changed it so it should be stock unless Conrom changed it.
Let me see if I can take a picture and post it.
Here's a picture:
I believe I had the same problem when the ICS OTA came out. Here's what you'll need to do, and someone please correct me if I am wrong.
Go here and download the newest RUU: http://www.filefactory.com/f/c2e320ee1d5c7886/
AshtonTS said:
OK so open the ruu and follow it until it tells you to plug in your device. Don't plug it in. Open the start menu in windows and type in %temp% and hit enter and then find the most recent folder open it and find the rom.zip file. Drag that to your desktop, rename it PH98IMG.zip and place it on the root of your rezound SD card and flash in Hboot
Click to expand...
Click to collapse
Before you flash the PH98IMG file you'll need to lock your bootloader. This will get you to the stock OTA from last week, and you should be able to get the new OTA.
A2Aegis said:
I believe I had the same problem when the ICS OTA came out. Here's what you'll need to do, and someone please correct me if I am wrong.
Go here and download the newest RUU: http://www.filefactory.com/f/c2e320ee1d5c7886/
Before you flash the PH98IMG file you'll need to lock your bootloader. This will get you to the stock OTA from last week, and you should be able to get the new OTA.
Click to expand...
Click to collapse
I already have the ruu on my computer. I installed it before I installed Conrom and then removed it from my sd card. I realize I need to lock my bootloader but that's where I got hung up. When I relocked, it wouldn't boot past the hboot/fastboot screen.
I don't know if it's safe to put the ruu back on my sd card, relock and reload the ruu.
Here is the the 3.14.605.10 RUU as a PH98IMG:
http://db.tt/p6sIKXrp
You just need to drop that on your SD card and go.
I still stand by my recommendation of S-Off. Never unlock again!
Also makes flashing RUUs and such way easier.
Sent from my ADR6425LVW using Tapatalk 2
LunaticSerenade said:
Here is the the 3.14.605.10 RUU as a PH98IMG:
http://db.tt/p6sIKXrp
You just need to drop that on your SD card and go.
I still stand by my recommendation of S-Off. Never unlock again!
Also makes flashing RUUs and such way easier.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Can I drop the 3.14.605.12 RUU as a PH98IMG on my sd card instead?
May have to look into S-Off but this is my work phone. I just want to get back to the latest stock for now.
I really appreciate your help!
Chuck Snorus said:
Can I drop the 3.14.605.12 RUU as a PH98IMG on my sd card instead?
May have to look into S-Off but this is my work phone. I just want to get back to the latest stock for now.
I really appreciate your help!
Click to expand...
Click to collapse
Download the 3.14.605.12.zip and rename ph98img.zip. Put it on your sdcard. After that boot into bootloader and lock your phone. After you lock go back into bootloader and it will recognize and flash the ph98img.zip. flash this twice and you are good to go
Sent from my ADR6425LVW using Tapatalk 2
chaos254 said:
Download the 3.14.605.12.zip and rename ph98img.zip. Put it on your sdcard. After that boot into bootloader and lock your phone. After you lock go back into bootloader and it will recognize and flash the ph98img.zip. flash this twice and you are good to go
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I'll give it a whirl. When I locked it, that's when it gave me the security warning and wouldn't boot to the rom. It did look for the PH98IMG file which wasn't on the sd card so I'll try that again with it on the sd card. Hopefully it will load as it should.
Chuck Snorus said:
I'll give it a whirl. When I locked it, that's when it gave me the security warning and wouldn't boot to the rom. It did look for the PH98IMG file which wasn't on the sd card so I'll try that again with it on the sd card. Hopefully it will load as it should.
Click to expand...
Click to collapse
No need to lock as flashing the RUU in bootloader will relock it for you, it will also s-on. The important part is to make sure you are on a stock hboot, which it looks like you are. If you want to go through the effort of flashing the RUU, just flash it, then you will need to unlock and s-off if you'd like
TheBr0ken said:
No need to lock as flashing the RUU in bootloader will relock it for you, it will also s-on. The important part is to make sure you are on a stock hboot, which it looks like you are. If you want to go through the effort of flashing the RUU, just flash it, then you will need to unlock and s-off if you'd like
Click to expand...
Click to collapse
It's working on the second flash as we speak. Thanks for all the help! I'll report back success or failure.
Chuck Snorus said:
I'll give it a whirl. When I locked it, that's when it gave me the security warning and wouldn't boot to the rom. It did look for the PH98IMG file which wasn't on the sd card so I'll try that again with it on the sd card. Hopefully it will load as it should.
Click to expand...
Click to collapse
Edit: nvm lol. Sounds like you're good to go.
Chuck Snorus said:
It's working on the second flash as we speak. Thanks for all the help! I'll report back success or failure.
Click to expand...
Click to collapse
Okay. I'm back in action! Not sure how that happened but it doesn't matter now.
Thanks all!
So while trying to update to ICS my fingers were working faster than my brain (yes, it happens) and I selected a menu option while using Clockwork and, while I'm not sure, I think the option said something like, "format .. OS...something..." before I could fully read it (and stop my finger from pressing the power button), I pressed the power button.
The phone rebooted, got to the white HTC screen and stopped - stuck on the white HTC screen. I pulled the battery.
I Held down power and up-volume and got to the bootloader menu, selected recovery and Clockwork came up.
Couldn't "Recover" because it couldn't mount the SD card.
Couldn't mount the external SD card either.
Ok - tried a factory reset - Rebooted - up came the white HTC screen where it stays until I pull the battery.
I'm new at this (probably didn't need to say that, but...).
How Do I get past this point?
Is this phone agonner?
How do I load (anything) to the phone at this point?
Thanks in advance! I appreciate it.
MilesTHD said:
So while trying to update to ICS my fingers were working faster than my brain (yes, it happens) and I selected a menu option while using Clockwork and, while I'm not sure, I think the option said something like, "format .. OS...something..." before I could fully read it (and stop my finger from pressing the power button), I pressed the power button.
The phone rebooted, got to the white HTC screen and stopped - stuck on the white HTC screen. I pulled the batter.
I Held down power and up-volume and got to the bootloader menu, selected recovery and Clockwork came up.
Couldn't "Recover" because it couldn't mound the SD card.
Couldn't mound the external SD card either.
Ok - tried a factory reset - Rebooted - up came the white HTC screen where it stays until I pull the battery.
I'm new at this (probably didn't need to say that, but...).
How Do I get past this point?
Is this phone agonner?
How do I load (anything) to the phone at this point?
Thanks in advance! I appreciate it.
Click to expand...
Click to collapse
Try using adb commands from your computer to push a recovery to your phone and go from there
Sent from my ADR6425LVW using xda app-developers app
If it powers on, you're not bricked.
Are s-on or s-off?
Make sure you have a card reader for the following.
The best thing for you to do would probably to flash an RUU.
First, download the latest RUU.
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
If you are s-on with unlocked boot loader, relock it:
Make sure there is no PH98IMG.ZIP on your sdcard. Delete if there is one.
Power off phone completely with battery pull.
Plug in phone to computer with USB.
Go to the bootloader menu with vol down + power.
Select fastboot.
On your computer, run the following fastboot command (do whatever you needed to do to use fastboot):
fastboot oem lock
After that is done, time to install the RUU.
Find the RUU you downloaded and put it on your sdcard, then rename to PH98IMG.ZIP
Put sdcard back, then power on to bootloader.
It should now scan for the PH98IMG and then ask you to install it.
Follow all the instructions to install it.
After you finish this, you will be back to the stock ROM with a locked boot loader.
If either s-off or s-on locked bootloader
Sent from my HTC Rezound using Tapatalk 2
Rezound still major messed up
THANK YOU for your help, I really appreciate your response. I followed your instructions and once the PH98IMG.zip file was on the SD card I loaded bootloader and it did scan for the file, but said "no file or wrong file!" Well, the file is there so I know its not "no" file. I've tried a couple of different PH98IMG files that I found on XDA but I guess the specific file wasn't the problem.
After it gives the error message it simple goes back to the bootloader and waits.
Unlocking the bootloader and then following your instructions did result in the file being seen and, what appeared to be, the installation process beginning - however when the phone reboots for the first time it just goes quiet and never comes back up. I waited for at least 20 minutes before I decided it wasn't just a long boot process.
I"m pretty sure there is NOTHING on this phone. I've verified there's nothing on the SD card besides the PH98IMG.zip file. Assuming I've completely wiped out the OS (and it is not on the phone) is the method you've outlined the right starting point?
Thanks again, and Merry Christmas
Miles
wlmeng11 said:
If it powers on, you're not bricked.
Are s-on or s-off?
Make sure you have a card reader for the following.
The best thing for you to do would probably to flash an RUU.
First, download the latest RUU.
If you are s-on with unlocked boot loader, relock it:
Make sure there is no PH98IMG.ZIP on your sdcard. Delete if there is one.
Power off phone completely with battery pull.
Plug in phone to computer with USB.
Go to the bootloader menu with vol down + power.
Select fastboot.
On your computer, run the following fastboot command (do whatever you needed to do to use fastboot):
fastboot oem lock
After that is done, time to install the RUU.
Find the RUU you downloaded and put it on your sdcard, then rename to PH98IMG.ZIP
Put sdcard back, then power on to bootloader.
It should now scan for the PH98IMG and then ask you to install it.
Follow all the instructions to install it.
After you finish this, you will be back to the stock ROM with a locked boot loader.
If either s-off or s-on locked bootloader
Sent from my HTC Rezound using Tapatalk 2
Click to expand...
Click to collapse
MilesTHD said:
THANK YOU for your help, I really appreciate your response. I followed your instructions and once the PH98IMG.zip file was on the SD card I loaded bootloader and it did scan for the file, but said "no file or wrong file!" Well, the file is there so I know its not "no" file. I've tried a couple of different PH98IMG files that I found on XDA but I guess the specific file wasn't the problem.
After it gives the error message it simple goes back to the bootloader and waits.
Unlocking the bootloader and then following your instructions did result in the file being seen and, what appeared to be, the installation process beginning - however when the phone reboots for the first time it just goes quiet and never comes back up. I waited for at least 20 minutes before I decided it wasn't just a long boot process.
I"m pretty sure there is NOTHING on this phone. I've verified there's nothing on the SD card besides the PH98IMG.zip file. Assuming I've completely wiped out the OS (and it is not on the phone) is the method you've outlined the right starting point?
Thanks again, and Merry Christmas
Miles
Click to expand...
Click to collapse
If you are S-on and have an unlocked bootloader, you will need to relock it before attempting to flash an ruu. Once re-locked, ensure that the PH98IMG is not a zip file within a zip file which is how they are usually uploaded. Attempt to unzip the files until it will not unzip anymore. That file that won't unzip needs to be the one you rename as PH98IMG and placed on the root of your SD card. Reboot to bootloader and allow it to scan. It will ask you if you wish to proceed and you will allow it. After some time it will reboot back to bootloader to flash radios and the rest of firmware. After that process and a 2nd reboot you should he back to stock, locked, and unrooted.
Sent from my Rezound using xda premium
Also, it could be possible that your phone can't recognize the sd card so it needs to be formatted.
Sent from my HTC Rezound using Tapatalk 2
zip file contents?
Maybe I should ask what the contents of the .zip file should be? I did check the zip to make sure it wasn't a double-zip. There were two versions of the PH98IMG file i tried. One had the file (imagemate-3.60.exe) the other had the file(s) (boot.img and android-info.txt).
I did "relock" the bootloader prior to trying and it would not recognize the file. When it was unlocked it would see it, start the install process, then go quiet. So that at least tells us that the file is there and likely workable.
I can't seem to get past the "No image or wrong image" message. I've tried on 3 different cards (the original and two fresh cards) and I've checked to ensure the zip is not a zip within a zip.
IAmTheOneTheyCallNeo said:
If you are S-on and have an unlocked bootloader, you will need to relock it before attempting to flash an ruu. Once re-locked, ensure that the PH98IMG is not a zip file within a zip file which is how they are usually uploaded. Attempt to unzip the files until it will not unzip anymore. That file that won't unzip needs to be the one you rename as PH98IMG and placed on the root of your SD card. Reboot to bootloader and allow it to scan. It will ask you if you wish to proceed and you will allow it. After some time it will reboot back to bootloader to flash radios and the rest of firmware. After that process and a 2nd reboot you should he back to stock, locked, and unrooted.
Sent from my Rezound using xda premium
Click to expand...
Click to collapse
MilesTHD said:
Maybe I should ask what the contents of the .zip file should be? I did check the zip to make sure it wasn't a double-zip. There were two versions of the PH98IMG file i tried. One had the file (imagemate-3.60.exe) the other had the file(s) (boot.img and android-info.txt).
I did "relock" the bootloader prior to trying and it would not recognize the file. When it was unlocked it would see it, start the install process, then go quiet. So that at least tells us that the file is there and likely workable.
I can't seem to get past the "No image or wrong image" message. I've tried on 3 different cards (the original and two fresh cards) and I've checked to ensure the zip is not a zip within a zip.
Click to expand...
Click to collapse
You should download that file from Android Police. It should have a 'bunch' of files in it. I"m not familiar with imagemate-3.60.exe but boot.img is just the kernel. Rename the file that you download to PH98img, (as previously stated) put it on a good SD card and boot into bootloader. It should go.
How about telling us if you are s-on or s-off. I don't see where you've answered that question. Also, if it doesn't work, tell us what your bootloader screen says. That will give us some info to help you.
Merry Christmas....I've got to go to bed before Santa shows up. :laugh::laugh:
EDIT: I just downloaded the Android Police file and as I said, it has a lot of files in it. I'm not sure what you were playing with but i likely the cause of you problem. Get the right file, name it ph98img.zip, put on root of SD, boot into bootloader (you're locked, right) and let it do its thing. good luck.
MilesTHD said:
Maybe I should ask what the contents of the .zip file should be? I did check the zip to make sure it wasn't a double-zip. There were two versions of the PH98IMG file i tried. One had the file (imagemate-3.60.exe) the other had the file(s) (boot.img and android-info.txt).
I did "relock" the bootloader prior to trying and it would not recognize the file. When it was unlocked it would see it, start the install process, then go quiet. So that at least tells us that the file is there and likely workable.
I can't seem to get past the "No image or wrong image" message. I've tried on 3 different cards (the original and two fresh cards) and I've checked to ensure the zip is not a zip within a zip.
Click to expand...
Click to collapse
One thing you need to know is that a PH98IMG file can be many things. It is only the name of a file that your phone looks for to use when booted into hboot. So it can be a kernel, an entire RUU (OS), a custom recovery or ROM... basically anything. It just means that item was packed into a PH98IMG file in order to run automatically off your SD card when the phone boots.
So you need to know what the PH98IMG file is that you are using or you might flash something you don't want that can possibly cause your phone to not work properly. In your examples above one is a kernel (boot.img) and I have no idea what imagemate-3.60.exe is. It sounds like you have not had the correct file.
Here is the global RUU you should run to get you back to stock with all the latest radios and firmware:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
You need to be locked to run it so if you are S-ON, which it sounds like you are (don't remember if you mentioned that before), you need to use fastboot from your pc to do that, just like you did when you unlocked it with this command:
fastboot oem lock
***If you are S-OFF you should be locked again from that process already. But if you are S-OFF then confirm with someone to be sure it's safe to run the RUU, there's something about not relocking if you are on a certain hboot or you can brick it or something...***
Then put the RUU on your SD card and reboot the phone. Let it run through the RUU a few times because apparently it needs to do it a few times to get all the system files. Afterwards, if you want to root again and flash a custom ROM you will need to unlock again and flash a custom recovery and reroot.
It Works!
Not that I'm going to give you all the credit, because everyone kinda chipped in - however you DID provide the ONLY correct link to exactly what I needed! LORDY there are a lot of bad links being passed around. THANK YOU Ms. Feralicious, I totally appreciate your help.
... Everyone else as well - very generous with your knowledge and time and I will always love you.
Merry Christmas! Have a safe new year as well!
Miles
feralicious said:
One thing you need to know is that a PH98IMG file can be many things. It is only the name of a file that your phone looks for to use when booted into hboot. So it can be a kernel, an entire RUU (OS), a custom recovery or ROM... basically anything. It just means that item was packed into a PH98IMG file in order to run automatically off your SD card when the phone boots.
So you need to know what the PH98IMG file is that you are using or you might flash something you don't want that can possibly cause your phone to not work properly. In your examples above one is a kernel (boot.img) and I have no idea what imagemate-3.60.exe is. It sounds like you have not had the correct file.
Here is the global RUU you should run to get you back to stock with all the latest radios and firmware:
You need to be locked to run it so if you are S-ON, which it sounds like you are (don't remember if you mentioned that before), you need to use fastboot from your pc to do that, just like you did when you unlocked it with this command:
fastboot oem lock
***If you are S-OFF you should be locked again from that process already. But if you are S-OFF then confirm with someone to be sure it's safe to run the RUU, there's something about not relocking if you are on a certain hboot or you can brick it or something...***
Then put the RUU on your SD card and reboot the phone. Let it run through the RUU a few times because apparently it needs to do it a few times to get all the system files. Afterwards, if you want to root again and flash a custom ROM you will need to unlock again and flash a custom recovery and reroot.
Click to expand...
Click to collapse
Followed these directions & update fails...Please help.
Have PH98IMG.zip on sd card.
Gets this far...
*** LOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.11.0000
eMMC-boot
HBOOT
Parsing...[SD ZIP]
[1]...
...[18]
...start update?
<VOL UP>
Next to "[1] BOOTLOADER" "- Fail-PU"
And below [18]..., "Partition update fail!"
"Update Fail!"
"Press <POWER> to reboot."
It's an HTC Rezound I'm trying to get back to stock, Verizon.
Any ideas?
It's locked which means it's never been unlocked and it's s-on. A simple factory reset within the rom itself will suffice
Sent from my Rezound using xda premium
rut-row...running rezound reset from rom repeatedly ravaging me :-O
IAmTheOneTheyCallNeo said:
It's locked which means it's never been unlocked and it's s-on. A simple factory reset within the rom itself will suffice
Sent from my Rezound using xda premium
Click to expand...
Click to collapse
When running rom, ...
"RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9
K_release_270509_signed.exe" ...
ends in usb error 170...
Anyone having any pointers for me will be worshiped indefinately!
Thank-You and I'm-not-worthy, in advance,
Tom
screen shots
TommyJames said:
When running rom, ...
"RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9
K_release_270509_signed.exe" ...
ends in usb error 170...
Anyone having any pointers for me will be worshiped indefinately!
Thank-You and I'm-not-worthy, in advance,
Tom
Click to expand...
Click to collapse
attached error window pic.
TommyJames said:
attached error window pic.
Click to expand...
Click to collapse
Try putting the PH98IMG.ZIP on your sdcard manually.
Sent from my HTC Rezound using Tapatalk 2
TommyJames said:
When running rom, ...
"RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9
K_release_270509_signed.exe" ...
ends in usb error 170...
Anyone having any pointers for me will be worshiped indefinately!
Thank-You and I'm-not-worthy, in advance,
Tom
Click to expand...
Click to collapse
Not sure what you're trying to do there, run an RUU?
Did you try a factory reset from the settings of the phone as Neo suggested?
Settings > Storage > Factory data reset
But back up anything you want to save such as pics, settings, etc... it will wipe everything.
same thing happens...
TommyJames said:
Have PH98IMG.zip on sd card.
Gets this far...
*** LOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.11.0000
eMMC-boot
HBOOT
Parsing...[SD ZIP]
[1]...
...[18]
...start update?
<VOL UP>
Next to "[1] BOOTLOADER" "- Fail-PU"
And below [18]..., "Partition update fail!"
"Update Fail!"
"Press <POWER> to reboot."
It's an HTC Rezound I'm trying to get back to stock, Verizon.
Any ideas?
Click to expand...
Click to collapse
same thing happens...
TommyJames said:
same thing happens...
Click to expand...
Click to collapse
You still needing help?
Where did you get the PH...img file you are using? Are you sure it's an RUU?
Did you ever try resetting to factory settings within the phone? You don't need to RUU for that, check a few posts up on where to find the setting.
Sooo, playing with rooting, been rooted for a couple days, flashed viperlte rom and had problems and decided to take it back to stock for now. Gonna be on the road and can't be 'experimenting'...attempted to go back to stock, by using the original RUU, and as I understood it, I needed to lock the phone back first. Didn't make sense as I was wondering how I could flash a Rom if it was locked back. After locking, when trying to go to recovery, it just comes back to fastboot. I can't get into the main phone--it boots to a screen, but no buttons work, although if i press volume up/down it shows it on the screen. What have I done?! I'll admit being a newb to phones, so please, some guru help me get back to something
Here's what fastboot shows:
TAMPERED
RELOCKED
SECURITY WARNING
Fireball pvt ship s-on rl
Hboot 1.15
Radio 1.53
opendsp v29.1.0.45
emmc-boot
It wouldn't read either of the mini sd-cards I used after rooting, so I can't just get use my sdcard with a new or original rom. I can't get to a main phone screen to turn on usb debugging, so no adp? Any ideas?
zazaray said:
Sooo, playing with rooting, been rooted for a couple days, flashed viperlte rom and had problems and decided to take it back to stock for now. Gonna be on the road and can't be 'experimenting'...attempted to go back to stock, by using the original RUU, and as I understood it, I needed to lock the phone back first. Didn't make sense as I was wondering how I could flash a Rom if it was locked back. After locking, when trying to go to recovery, it just comes back to fastboot. I can't get into the main phone--it boots to a screen, but no buttons work, although if i press volume up/down it shows it on the screen. What have I done?! I'll admit being a newb to phones, so please, some guru help me get back to something
Here's what fastboot shows:
TAMPERED
RELOCKED
SECURITY WARNING
Fireball pvt ship s-on rl
Hboot 1.15
Radio 1.53
opendsp v29.1.0.45
emmc-boot
It wouldn't read either of the mini sd-cards I used after rooting, so I can't just get use my sdcard with a new or original rom. I can't get to a main phone screen to turn on usb debugging, so no adp? Any ideas?
Click to expand...
Click to collapse
download the ruu rename it PJ53IMG THEN transfer it to your sdcard via your computer and put back in phone and boot to bootloader, it should pick up the PJ53IMG, AND ASK YOU IF YOU WANT TO CONTINUE, hit volume up to sat yes.(put sdcard in an adapter and put in your computer to transfer) Also you want 2.17.605.2 ruu software. make sure the zip is on the root of the sdcard(not in a folder, then make sure after you transfer that the file doesn't have 2 zips on it (PJ53IMG.ZIP.ZIP)YOU WANT ONLY ONE ZIP
Aldo101t said:
download the ruu rename it PJ53IMG THEN transfer it to your sdcard via your computer and put back in phone and boot to bootloader, it should pick up the PJ53IMG, AND ASK YOU IF YOU WANT TO CONTINUE, hit volume up to sat yes.(put sdcard in an adapter and put in your computer to transfer) Also you want 2.17.605.2 ruu software. make sure the zip is on the root of the sdcard(not in a folder, then make sure after you transfer that the file doesn't have 2 zips on it (PJ53IMG.ZIP.ZIP)YOU WANT ONLY ONE ZIP
Click to expand...
Click to collapse
Thank you for the response. Tried this, it loaded the zip, then went to 'checking' and after that, back to the bootloader. Never asked me if I wanted to proceed. When rebooted it brought me back to where I was, a phone which appears to be up--clock works, wifi is on, but I can't do anything. I feel pretty confident the img is good. Thoughts?
zazaray said:
Thank you for the response. Tried this, it loaded the zip, then went to 'checking' and after that, back to the bootloader. Never asked me if I wanted to proceed. When rebooted it brought me back to where I was, a phone which appears to be up--clock works, wifi is on, but I can't do anything. I feel pretty confident the img is good. Thoughts?
Click to expand...
Click to collapse
HOW did you put the ruu on the sdcard? from the computer? or usb
Aldo101t said:
HOW did you put the ruu on the sdcard? from the computer? or usb
Click to expand...
Click to collapse
XP PC, formatted fat32, put it on root...just tried a different ruu, searched the exact string, the 2.0... and got it from a xda forum member, so I feel confident in the ruu. It did the same thing, loaded it, checked it for about 2 mins, then returned me to the loader. I noticed SECURITY WARNING is gone from bootloader now, FYI. What else can we try?
zazaray said:
XP PC, formatted fat32, put it on root...just tried a different ruu, searched the exact string, the 2.0... and got it from a xda forum member, so I feel confident in the ruu. It did the same thing, loaded it, checked it for about 2 mins, then returned me to the loader. I noticed SECURITY WARNING is gone from bootloader now, FYI. What else can we try?
Click to expand...
Click to collapse
go to your file explorer and access the ext sdcard and see if the file is PJ53IMG.ZIP
you ARE downloading a zip file and not an image file????
Aldo101t said:
go to your file explorer and access the ext sdcard and see if the file is PJ53IMG.ZIP
you ARE downloading a zip file and not an image file????
Click to expand...
Click to collapse
That is the name of the file and here is the link where I'm downloading the zip file http://forum.xda-developers.com/showthread.php?t=1947600
zazaray said:
That is the name of the file and here is the link where I'm downloading the zip file http://forum.xda-developers.com/showthread.php?t=1947600
Click to expand...
Click to collapse
that's the right one, it should work, ////...????
Aldo101t said:
that's the right one, it should work, ////...????
Click to expand...
Click to collapse
Oh no, not what I wanted to hear Thanks for the help, any other ideas? Anyone else experienced it loading the zip, check it, then nothing happen? I'll do some forum searching...
Can you unlock the bootloader again?
somerandomname1 said:
Can you unlock the bootloader again?
Click to expand...
Click to collapse
I dunno, is there a way to do it from the bootloader? Cause I can't get to a place where I can push adp commands and I can't get to recovery...i've hosed this thing haven't I? I've got insurance, do I need to drop this thing in the sink and get another? And maybe not try rooting the next one...
zazaray said:
I dunno, is there a way to do it from the bootloader? Cause I can't get to a place where I can push adp commands and I can't get to recovery...i've hosed this thing haven't I? I've got insurance, do I need to drop this thing in the sink and get another? And maybe not try rooting the next one...
Click to expand...
Click to collapse
No need for all that just calm down. I'm confused are you stuck n bootloader or can you boot up into your ROM?
http://img716.imageshack.us/img716/3192/1362812254888.png
You said you where relocked right? You must be locked to ruu
Sent from my Incredible 4G LTE using xda app-developers app
zazaray said:
I dunno, is there a way to do it from the bootloader? Cause I can't get to a place where I can push adp commands and I can't get to recovery...i've hosed this thing haven't I? I've got insurance, do I need to drop this thing in the sink and get another? And maybe not try rooting the next one...
Click to expand...
Click to collapse
If you are on my boot loader unlock method just unlock, flash recovery and then a rom
Sent from my TF300T using xda app-developers app
jose51197 said:
If you are on my boot loader unlock method just unlock, flash recovery and then a rom
Sent from my TF300T using xda app-developers app
Click to expand...
Click to collapse
Would you mind posting a link to your unlock method? The method I used the first time was using usb debugging and adp commands from windows. Can I unlock somehow from within the bootloader? Thank you very much for your help. Lol, my phone is ringing at this moment but i've got know way to answer it
Aldo101t said:
You said you where relocked right? You must be locked to ruu
Sent from my Incredible 4G LTE using xda app-developers app
Click to expand...
Click to collapse
Yes, I relocked from the bootloader, as I guess i misunderstood that I needed to do that before flashing the ruu...I was actually on one of the custom roms when I locked it
prairiedogn said:
No need for all that just calm down. I'm confused are you stuck n bootloader or can you boot up into your ROM?
http://img716.imageshack.us/img716/3192/1362812254888.png
Click to expand...
Click to collapse
I CAN boot into the rom, but nothing is accessible...the phone rings if someone calls, beeps alerts for mail notification or txt, but no buttons work and screen is blank(except for wallpaper). I can see the icons connect to wifi and such, so it's working, I guess, sort of...
zazaray said:
Would you mind posting a link to your unlock method? The method I used the first time was using usb debugging and adp commands from windows. Can I unlock somehow from within the bootloader? Thank you very much for your help. Lol, my phone is ringing at this moment but i've got know way to answer it
Click to expand...
Click to collapse
no way to answer it, even
Have you tried wiping everything and flashing a new ROM.
http://img716.imageshack.us/img716/3192/1362812254888.png
prairiedogn said:
Have you tried wiping everything and flashing a new ROM.
http://img716.imageshack.us/img716/3192/1362812254888.png
Click to expand...
Click to collapse
I can't get into recovery or use adp commands from windows, is there another way I can wipe and flash?
Hi everyone, I've seen you guys help out so many other people I figured I'd give it a try.
My HTC Rezound is not working. I can't charge the device while off. I can't start the phone (Flashes the HTC logo, screen goes dark for one second, then stays at the HTC logo. Luckily, I have an old Thunderbolt, I have been able to charge my battery through that, and access the bootloader using the power + vol down method.
I have never rooted my Rezound and have been using stock since I got it, here is what I see in my bootloader:
***LOCKED***
VIGOR PVT SHIP S-ON RL
HBOOT-2.28.0000
RADIO-2.23. 10. 0123R/2.23.10.0124R
OPENDSP-V14.6.0.7708.00.0507
EMMC-BOOT
SEP 20 2012, 17: 40: 22
Under that I see the regular Bootloader menu. I cannot use recovery, factory reset or clear storage, because it fails and I get the E: Can't mount /data/data/recovery/log error message. I tried downloading a PH98IMG.zip file, but when it tries to load it I get an error saying that the version on the phone is newer than the one on the SD card, and it won't update (Don't know if that's an issue with downloading things from before Sep 20 2012, but I havn't found anything post that). I can't use the RUU updater because my computer will not mount/ recognize my phone, I downloaded all the HTC sync stuff, and my computer beeps and says that there is something there, but it fails somewhere in the process and nothing sees it. I also tried to push it with ADB, but I get the same issues, CMD will ask me to attach the device and I can't get past it.
So that's where I am, I can get to my bootloader, but I can't do anything via the RUU exe, ph98IMG.zip file on an SD card, or ADB/Fastboot. I'm stuck.
I am willing to try anything, and will give any other information you guys need if you think you can help. Meanwhile I'm using my old cracked Thunderbolt that lost it's 4G capability, I feel dirty.
Please let me know if you can help! And thanks in advance!
If past your warranty or if you have no insurance on it. Go to the htcdev website and unlock the phone.
Sent from my ADR6425LVW using Tapatalk 2
reallyneedshelp said:
Hi everyone, I've seen you guys help out so many other people I figured I'd give it a try.
My HTC Rezound is not working. I can't charge the device while off. I can't start the phone (Flashes the HTC logo, screen goes dark for one second, then stays at the HTC logo. Luckily, I have an old Thunderbolt, I have been able to charge my battery through that, and access the bootloader using the power + vol down method.
I have never rooted my Rezound and have been using stock since I got it, here is what I see in my bootloader:
***LOCKED***
VIGOR PVT SHIP S-ON RL
HBOOT-2.28.0000
RADIO-2.23. 10. 0123R/2.23.10.0124R
OPENDSP-V14.6.0.7708.00.0507
EMMC-BOOT
SEP 20 2012, 17: 40: 22
Under that I see the regular Bootloader menu. I cannot use recovery, factory reset or clear storage, because it fails and I get the E: Can't mount /data/data/recovery/log error message. I tried downloading a PH98IMG.zip file, but when it tries to load it I get an error saying that the version on the phone is newer than the one on the SD card, and it won't update (Don't know if that's an issue with downloading things from before Sep 20 2012, but I havn't found anything post that). I can't use the RUU updater because my computer will not mount/ recognize my phone, I downloaded all the HTC sync stuff, and my computer beeps and says that there is something there, but it fails somewhere in the process and nothing sees it. I also tried to push it with ADB, but I get the same issues, CMD will ask me to attach the device and I can't get past it.
So that's where I am, I can get to my bootloader, but I can't do anything via the RUU exe, ph98IMG.zip file on an SD card, or ADB/Fastboot. I'm stuck.
I am willing to try anything, and will give any other information you guys need if you think you can help. Meanwhile I'm using my old cracked Thunderbolt that lost it's 4G capability, I feel dirty.
Please let me know if you can help! And thanks in advance!
Click to expand...
Click to collapse
The fact you've kept it stock and it won't let you get past hboot or the HTC screen and you can't do anything via hboot tells me it's dead.
You have the latest hboot, there is no RUU/firmware zip available to let you re-install everything clean.
You're probably gonna have to get it replaced.
Flyhalf205 said:
If past your warranty or if you have no insurance on it. Go to the htcdev website and unlock the phone.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I was able to unlock it using the method on the htcdev website.... what can I do with it now? Bootloader looks the same, but says **UNLOCKED** at the top of the screen.
reallyneedshelp said:
I was able to unlock it using the method on the htcdev website.... what can I do with it now? Bootloader looks the same, but says **UNLOCKED** at the top of the screen.
Click to expand...
Click to collapse
Download TWRP at http://forum.xda-developers.com/attachment.php?attachmentid=2102623&d=1373341752
Extract the .zip and place the .img file in the same folder as fastboot. Use fastboot to flash it. The command is going to be fastboot flash recovery recovery.img
Once you done that. use command fastboot boot recovery.img
Go to backup and create a backup
After that finishes backing up. Download http://vp-zp.com/snuzzo/kernels/rezound/sense/Funky-Kernel-v3.7.3.zip and place it on your sdcard. You can mount your usb drive inside TWRP recovery.
After you have copied it over. Install that zip from the sdcard and it should go through the steps of being s-on since you are s-on. Then reboot phone
Flyhalf205 said:
Download TWRP at http://forum.xda-developers.com/attachment.php?attachmentid=2102623&d=1373341752
Extract the .zip and place the .img file in the same folder as fastboot. Use fastboot to flash it. The command is going to be fastboot flash recovery recovery.img
Once you done that. use command fastboot boot recovery.img
Go to backup and create a backup
After that finishes backing up. Download http://vp-zp.com/snuzzo/kernels/rezound/sense/Funky-Kernel-v3.7.3.zip and place it on your sdcard. You can mount your usb drive inside TWRP recovery.
After you have copied it over. Install that zip from the sdcard and it should go through the steps of being s-on since you are s-on. Then reboot phone
Click to expand...
Click to collapse
When I ran fastboot boot recovery.img the phone when dark for a second, went back to the fastboot menu, but now at the top of the screen above ***UNLOCKED*** there is a *** TAMPERED*** but no recovery menu. Is this ok?
EDIT: I went into recovery and see the new menu. will update once finished.
reallyneedshelp said:
When I ran fastboot boot recovery.img the phone when dark for a second, went back to the fastboot menu, but now at the top of the screen above ***UNLOCKED*** there is a *** TAMPERED*** but no recovery menu. Is this ok?
Click to expand...
Click to collapse
That is fine saying TAMPERED. Just means you have something custom flashed. Hit the power button and go into HBOOT. Then select recovery in the list.
EDIT: Just saw you edited after I posted
Flyhalf205 said:
That is fine saying TAMPERED. Just means you have something custom flashed. Hit the power button and go into HBOOT. Then select recovery in the list.
EDIT: Just saw you edited after I posted
Click to expand...
Click to collapse
Ha! OK, now I'm done, but there was another problem. The installation failed. Here is what it said:
Funky Kernel
for
HTC Rezound
Funky-Kernel-v3.7.3
Linux upstream version : 3.0.87
Mounting /system
installing modules
file_getprop: failed to stat " /system/build.prop
E: Error executing updater binary in zip ' ?sdcard
Error flashing zip ' /sdcard/funky-kernel-v3.7.3
Updating partition details...
"E: Unable to mount" /cache
""/data
""/system
""/emmc
"" unable to mount internal storage
Am I done for?
You might be...
Flyhalf205 said:
You might be...
Click to expand...
Click to collapse
Well, I sincerely appreciate the effort. It seems like the internal storage somehow got damaged, can't imagine how that happened. At least I have a thunderbolt to keep me until I find a new phone. It could be worse.
Thanks for the help!
reallyneedshelp said:
Well, I sincerely appreciate the effort. It seems like the internal storage somehow got damaged, can't imagine how that happened. At least I have a thunderbolt to keep me until I find a new phone. It could be worse.
Thanks for the help!
Click to expand...
Click to collapse
Just out of curiosity. Did you try doing a Factory Reset in that white HBOOT screen before we started this process?
Flyhalf205 said:
Just out of curiosity. Did you try doing a Factory Reset in that white HBOOT screen before we started this process?
Click to expand...
Click to collapse
Yeah, same as anything else, can't mount E.
In TWRP try to mount internal storage when plugged into a PC. See if formatting would work.
Sent from my Infected Rezound using xda app-developers app
Uzephi said:
In TWRP try to mount internal storage when plugged into a PC. See if formatting would work.
Sent from my Infected Rezound using xda app-developers app
Click to expand...
Click to collapse
Won't let me. Internal storage showing up as 0MB. :/
reallyneedshelp said:
Won't let me. Internal storage showing up as 0MB. :/
Click to expand...
Click to collapse
It doesn't sound like your internal storage is completely toast. You are able to boot into the hboot partition and the recovery partition, the others may be corrupt and reflashing the recent RUU may help. Try to s-off to be able to RUU recent and older RUU zips (stock IMGs)
Sent from my Infected Rezound using xda app-developers app
Uzephi said:
It doesn't sound like your internal storage is completely toast. You are able to boot into the hboot partition and the recovery partition, the others may be corrupt and reflashing the recent RUU may help. Try to s-off to be able to RUU recent and older RUU zips (stock IMGs)
Sent from my Infected Rezound using xda app-developers app
Click to expand...
Click to collapse
There's no recent RUU to flash, that's part of the problem, none came out for the OTA update and you also need a running rom installed to s-off.
OP - What happens if you try to format the partitions via TWRP?
mjones73 said:
There's no recent RUU to flash, that's part of the problem, none came out for the OTA update and you also need a running rom installed to s-off.
OP - What happens if you try to format the partitions via TWRP?
Click to expand...
Click to collapse
Won't mount anything to format, just will say can't read. I can however go through the file tree. Somehow the internal memory got semi-fried. I don't know what happened.
im having a very similar problem except none of my computers will recognize my phone so i cant re-unlock my bootloader any suggestions