Related
Im trying to unlock Sony xperia sola rite now.... it wont stay on fastboot mode ( volume up + plug usb) when i press volume up, the light strip turns blue for a second or two, but then goes into charging while shutdown mode... I chek *#*#7378423#*#* -- Service info > Configuration > Rooting Status it says - YES// I try USB debugging ON and OFF... I try to stay on fastboot with my home pc windows 7 and my notebook windows vista..Battery 95-100% charged... What i do wrong?
Do you have installed drivers properly?
Try reinstall drivers and try different USB port.
xbeda said:
Do you have installed drivers properly?
Try reinstall drivers and try different USB port.
Click to expand...
Click to collapse
how can i install drivers without connecting device?
I solved the problem)
1) Open device manager in windows
2) Connect usb cable to your phone pushing vol up button
3) Device manager will show you fastboot device for 2-3 sec (before the phone go to charge mode) Right click on fastboot device and install drivers from C:\Android\sdk\extras\google\usb_driver
4) Reconnect usb cable pushing volup button
I have the same problem but I dont know if cuz my PC is way too slow. I dont even have a chance for it to show up But I know it connected cuz of the alert sound.
---------- Post added at 08:50 AM ---------- Previous post was at 08:27 AM ----------
Haha I solved my problem by installing the driver in safe mode. Things went much quicker here )
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Nerre said:
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Click to expand...
Click to collapse
Do you know u are GENIUS !!!
i have been trying to get my phone in fast boot mode for the last 3 weeks then then i changed the "System Varibales" in my Windows & ( 64Bit) and then tried your above method AND ... volaaaa it works ... in a flash it works then the pone is in Fastboot mode .
( Device : Sony Xperia Sola 2012 without upgrade to .654)
Don't call me the genius, I found the solution using google
I just wrote a quick summary of it.
Nerre said:
I just wrote a quick summary of it.
Click to expand...
Click to collapse
...which was enormously helpful. Thanks!! (Can't push the thanks button as I don't have enough posts yet.
BTW, I used the method with the Xperia Go, so obviously the method is not limited to a particular model.
It works
Really helpful!
Hey
I can't even know where will the fastboot device appear to change driver. What can I do? My sola goes in charge mode very quickly I plugged my usb cable in almost 100 times and tried everything.
Okay, I'm totally lost. When I hold volume down button "s1boot download" appers in device manager, but it can't install a proper driver. I know I need s1boot fastboot and hold volume up button but it doesn't appears. Only the portable device with an H:/ partition
Make sure phone is OFF
While plugging in the USB cable, hold and keep holding the UP VOLUME key
You will hear a system sound played
Do all these while you have Device Manager on screen
Exclamation mark appears on the ADB driver icon
Chose the option to look for the driver in your hard disk - point to where the drivers are.
If using Win8 then you need to disable signing of drivers first (search on net how to)
So far you managed to do this or not?
ricstc said:
Make sure phone is OFF
While plugging in the USB cable, hold and keep holding the UP VOLUME key
You will hear a system sound played
Do all these while you have Device Manager on screen
Exclamation mark appears on the ADB driver icon
Chose the option to look for the driver in your hard disk - point to where the drivers are.
If using Win8 then you need to disable signing of drivers first (search on net how to)
So far you managed to do this or not?
Click to expand...
Click to collapse
Hey, nothing is working for me. I did the steps above, but with no chance to install any driver. At the driver manager, the s1boot fastboot-thing is showing up for some seconds and then disappear. i can't change the driver or install the new one.
Any suggestions? I want to change to cm9 so much, because the stock rom really sucks...it is slow and buggy
Edit: I found this post http://forum.xda-developers.com/showthread.php?t=1554632 and it works for me!!!
Edit 2: It seems, that you have to do this steps everytime you flash the boot.img to the phone.
I did everything. I installed the driver but when I hold volume up while plug in usb, the led does not turn to BLUE. It turns pink or purple, some kind of colour. What should I do guys? I've gone mad.
Thanks
Nerre said:
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Click to expand...
Click to collapse
Thanks a ton!!!
i wasted my whole day trying it!
just hit this thread!!
will reply if it works!
---------- Post added at 06:32 PM ---------- Previous post was at 06:10 PM ----------
srivmanu said:
Thanks a ton!!!
i wasted my whole day trying it!
just hit this thread!!
will reply if it works!
Click to expand...
Click to collapse
Does't work!!
help someone??:crying::crying:
Doesnt work for me either. I tried everything for hours, but i only see a purple LED for a few seconds and then the phone mode changes into charging.
All drivers are installed.
Flashtool doesnt recognize the Sola either.
Is there a way to flash a recovery without having the Sola bootloader unlocked?
Greetings
still no fastboot
device manager opened
phone off, holding vol. up plugging in usb
NOTHING happens on computer no sound, device manager doesn't refreshes, no purple led on the phone, just enters charging quickly
tried another usb port
tried to enter fastboot from flashtool,
tried to enter with command adb reboot bootloader / adb reboot fastboot
NOTHING happens just reboots normally
So I don't have a clue what's going on there, may the fastboot disappeard or broken?
BUT I used the fastboot for a couple weeks ago in this computer in this usb port, since that I tried some rom does it matter?
BL Locked
Win7 x64
pl explain in detail
Nerre said:
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Click to expand...
Click to collapse
pl explain in detail.im a novice and i want to update to ICS in ma Sola....but fastboot driver installtion failed in my W 7 (64 bit):crying::crying::crying:
Solution
For those who still dont get it to work by "Nerre's" method.
The procedure will be same. You have to download latest android_winusb.inf file. I couldnt get it to work bcz of this. I was using the file from sony site. It was giving me some certificate error. Then I used the lates file downloaded from sdk kit. Then this procedure worked.
Make sure to choose "Android Boot loader Interface" after you select ...winusb.inf file. Then before clicking next, reconnect your device in fastboot mode.
Hope this helps someone.
I'm trying to unlock my booloader, but every time I enter on fastboot mode, the phone restarts. What am I doing wrong ?
The drivers arnt installed? My laptop said new device detected and I had to manually pick the drivers
Sent from my LT26i using Tapatalk 2
Ben36 said:
The drivers arnt installed? My laptop said new device detected and I had to manually pick the drivers
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
I believe so. My laptop says nothing now, and the cellphone just restart
Prepare like this before connecting your phone in fastboot mode:
go into device manager and keep the window open
now put your device in fastboot mode
there will be a new unknown device showing up at the top(mostly S1 boot device or something)
right click it, and select properties, then go to update drivers and manually point to the drivers you downloaded and extracted: http://bit.ly/As9FaT
install them.
if it doesnt work don't panic, dont close the window but get back to the properties of S1 Boot device and click on update drivers and point to the directory where the .inf file is stored.
now connect your phone until the blue LED shows up again and press the button to install the drivers QUICKLY, repeat this several times until it works!
Install theses drivers : (link sent by MP because of forum restrictions ... )
Deconnect your Xperia from your pc.
Shutdown your Xperia.
Hold the "volume Up" button and connect your Xperia to your pc. The LED may become blue and stay : your Xperia is now in "fasboot mod".
realfelix said:
Prepare like this before connecting your phone in fastboot mode:
go into device manager and keep the window open
now put your device in fastboot mode
there will be a new unknown device showing up at the top(mostly S1 boot device or something)
right click it, and select properties, then go to update drivers and manually point to the drivers you downloaded and extracted: http://bit.ly/As9FaT
install them.
if it doesnt work don't panic, dont close the window but get back to the properties of S1 Boot device and click on update drivers and point to the directory where the .inf file is stored.
now connect your phone until the blue LED shows up again and press the button to install the drivers QUICKLY, repeat this several times until it works!
Click to expand...
Click to collapse
I did this, but the laptop said: Windows could not find the driver software for the device. And the phone restarts =/
That's what happens...
I really need to unlock my bootloader to install CM10 ???
I have a xperia S and I'm trying to install CM10 on it, but I just cant unlock my bootloader. Every time I enter on fastboot mode, the phone restarts, and I dont succed trying to install the usb drivers because the phone restarts and the pc says "the windows could not find the driver software for the device. I was using ICS 4.0.4 but I downgrade to GB thinking the problem is the rom. =/
please help me, I really need CM10
conanjf said:
I have a xperia S and I'm trying to install CM10 on it, but I just cant unlock my bootloader. Every time I enter on fastboot mode, the phone restarts, and I dont succed trying to install the usb drivers because the phone restarts and the pc says "the windows could not find the driver software for the device. I was using ICS 4.0.4 but I downgrade to GB thinking the problem is the rom. =/
please help me, I really need CM10
Click to expand...
Click to collapse
what you gotta do is this..
download http://www.mediafire.com/?lt8ghch95u5abgo
If you open it, there are 2 zip files.
1. open drivers.zip
2. extract it somewhere
3. open device manager (or whatever it's called in English windows)
4. connect your Xperia S in fastboot mode (volume up and plug in USB)
5. in less them 3 seconds, hit right button on S1(something device with exclamation mark)
6. select "update drivers"
7. select somewhere\x64\usbwin folder
8. hit ok.
at this time your Xperia S will be allready out of fastboot mode.
9. wait for windows to install drivers
10. wait another couple of seconds, and plug Xperia S in fastboot mode again
If I've helped you, hit the thanks button
Harsh7689 said:
what you gotta do is this..
download http://www.mediafire.com/?lt8ghch95u5abgo
If you open it, there are 2 zip files.
1. open drivers.zip
2. extract it somewhere
3. open device manager (or whatever it's called in English windows)
4. connect your Xperia S in fastboot mode (volume up and plug in USB)
5. in less them 3 seconds, hit right button on S1(something device with exclamation mark)
6. select "update drivers"
7. select somewhere\x64\usbwin folder
8. hit ok.
at this time your Xperia S will be allready out of fastboot mode.
9. wait for windows to install drivers
10. wait another couple of seconds, and plug Xperia S in fastboot mode again
If I've helped you, hit the thanks button
Click to expand...
Click to collapse
I did this a lot of times, but the pc says, windows could not find the drivers and immediately the phone restarts to charging mode =/
How can it be ??
Do 1 thing, keep your device manager opened, connect the phone in FASTBOOT mode and as soon as the Driver icon appears, update driver manually !! It's okay if the phones disconnects.. Once the drivers are installed, connect the phone again..
Harsh7689 said:
How can it be ??
Do 1 thing, keep your device manager opened, connect the phone in FASTBOOT mode and as soon as the Driver icon appears, update driver manually !! It's okay if the phones disconnects.. Once the drivers are installed, connect the phone again..
Click to expand...
Click to collapse
PC says: Windows could not find the driver software. And nothing happens =/ See the print
READ what i have written properly..!!
Harsh7689 said:
READ what i have written properly..!!
Click to expand...
Click to collapse
I did man! But the driver doesnt install, that's the problem =/
I downgrade mt firmware to GB and tried to flashboot in another pc and it works.
conanjf said:
I downgrade mt firmware to GB and tried to flashboot in another pc and it works.
Click to expand...
Click to collapse
Okay!!
Congrats
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
XperiaU have a modified kernel with android 2.3.7, want to know if I upgrade to ICS by Sony's PC Companion can cause a problem for the modified kernel. (root)
If you use a modified kernel, then you have an unlocked bootloader so you cant use Sony PC Companion! Get Flashtool and the FTF instead Its a lot faster and simpler in my opinion
If you have any doubts on howto proceed, reply here or message me
Cheers
Min3r said:
If you use a modified kernel, then you have an unlocked bootloader so you cant use Sony PC Companion! Get Flashtool and the FTF instead Its a lot faster and simpler in my opinion
If you have any doubts on howto proceed, reply here or message me
Cheers
Click to expand...
Click to collapse
already heard about using FlashTool if you know of any link that teaches this would be grateful if you showed. but if I tried using the PC companio what would happen?
Found this on AndroidSoul Blog and modified for relevance :
1) Now copy the “.ftf” firmware file that you downloaded for your phone, and paste it inside the “firmwares” folder.
2) Double click the “FlashTool.exe” file.
3) Once the program opens — click on the “Flash” button. Its the Lightning button on top left
4) You’ll see the firmware that you copied loaded on the screen — click “Ok”!
Now it should ask you to connect your phone to the PC. So first plug the USB cable to PC, then pick up your phone and hold the “Volume Down” key and then connect the USB cable to your phone. Remember you’ve to hold the “Volume Down” key while connecting the USB cable to phone.
Once the phone gets connected — Flashtool will automatically start the flashing process.
Keep an eye on the Flashtool’s screen.
And once the process gets finished, disconnect your phone from PC and switch it ON.
Don’t freak if it takes longer to boot (that’s normal) as the phone has to build the cache again after flashing.
That will get you started And Sony PC Companion will give an error saying modified software if you try to flash on device with unlocked bootloader
ps : Since you are flashing a rom, use Flashmode and not fastboot when asked
Min3r said:
Found this on AndroidSoul Blog and modified for relevance :
1) Now copy the “.ftf” firmware file that you downloaded for your phone, and paste it inside the “firmwares” folder.
2) Double click the “FlashTool.exe” file.
3) Once the program opens — click on the “Flash” button. Its the Lightning button on top left
4) You’ll see the firmware that you copied loaded on the screen — click “Ok”!
Now it should ask you to connect your phone to the PC. So first plug the USB cable to PC, then pick up your phone and hold the “Volume Down” key and then connect the USB cable to your phone. Remember you’ve to hold the “Volume Down” key while connecting the USB cable to phone.
Once the phone gets connected — Flashtool will automatically start the flashing process.
Keep an eye on the Flashtool’s screen.
And once the process gets finished, disconnect your phone from PC and switch it ON.
Don’t freak if it takes longer to boot (that’s normal) as the phone has to build the cache again after flashing.
That will get you started And Sony PC Companion will give an error saying modified software if you try to flash on device with unlocked bootloader
ps : Since you are flashing a rom, use Flashmode and not fastboot when asked
Click to expand...
Click to collapse
Thank you. I'll test
Hello. I have rooted xperia P on last official rom. I tray to install manually this http://forum.xda-developers.com/showthread.php?t=2080773
When i "Put framework.jar manually to /system/framework/ " my xperia restart and now i'm on still on brand logo.
How to start bootloader mode? What to do next? Plz help.
azizi_ppc said:
Hello. I have rooted xperia P on last official rom. I tray to install manually this http://forum.xda-developers.com/showthread.php?t=2080773
When i "Put framework.jar manually to /system/framework/ " my xperia restart and now i'm on still on brand logo.
How to start bootloader mode? What to do next? Plz help.
Click to expand...
Click to collapse
can't understand what exactly happened to your device, try pressing power button and volume up button togheter, hold untill device turns off, and try to power it on again.
do u have cwm installed?
and do u have a backup?
if u do, u can restore your device thru cwm "backup and restore"
pa4ka16 said:
can't understand what exactly happened to your device, try pressing power button and volume up button togheter, hold untill device turns off, and try to power it on again.
Click to expand...
Click to collapse
when i tray to change framework.jar with total commander it restart and stay on brand logo, i also dont know what could happens
tray to power it off and on, with power button and combination of volume buttons, nothing change
azizi_ppc said:
when i tray to change framework.jar with total commander it restart and stay on brand logo, i also dont know what could happens
tray to power it off and on, with power button and combination of volume buttons, nothing change
Click to expand...
Click to collapse
u mean it doesen t turn off at all?
weird... did u hold power button with volume up button till it vibrates 3 times?
pa4ka16 said:
u mean it doesen t turn off at all?
weird... did u hold power button with volume up button till it vibrates 3 times?
Click to expand...
Click to collapse
I can power it off and on but always boot hang up on brand logo.
Tray to power button + vol up.
http://www.hard-reset.org/factory-d...set-sony-xperia-p-lt22i-with-easy-hard-reset/
cant use option 1, can't enter bootloader mod (vol- and usb put on) so option 2 is no good, tray option 3 but its not working
azizi_ppc said:
I can power it off and on but always both hang up on brand logo.
Tray to power button + vol up.
http://www.hard-reset.org/factory-d...set-sony-xperia-p-lt22i-with-easy-hard-reset/
cant use option 1, can't enter bootloader mod (vol- and usb put on) so option 2 is no good, tray option 3 but its not working
Click to expand...
Click to collapse
Well seems like u have soft bricked your device. Only way out is to flash new ROM with flashtool.
I can explain u how to do it if don t know.
thnx, i have instruction
http://developer.sonymobile.com/services/flash-tool/
but there is a problem
when i tray to enter flash (volume down + usb connect to pc) there is for a moment new device "s1 boot download" and it disappear :/
i have windows 8, maybe this is a problem?
azizi_ppc said:
thnx, i have instruction
http://developer.sonymobile.com/services/flash-tool/
but there is a problem
when i tray to enter flash (volume down + usb connect to pc) there is for a moment new device "s1 boot download" and it disappear :/
i have windows 8, maybe this is a problem?
Click to expand...
Click to collapse
Not sure. it might be because of Windows 8 or lack of drivers installed on it.
Try to flash new ROM on Windows 7, borrow a laptop or use friends pc.
azizi_ppc said:
thnx, i have instruction
http://developer.sonymobile.com/services/flash-tool/
but there is a problem
when i tray to enter flash (volume down + usb connect to pc) there is for a moment new device "s1 boot download" and it disappear :/
i have windows 8, maybe this is a problem?
Click to expand...
Click to collapse
Have you installed flashtool flash mode and fastboot drivers?
Try to disable driver verification as explained here http://forum.xda-developers.com/showthread.php?t=2170114
ChikeD said:
Have you installed flashtool flash mode and fastboot drivers?
Try to disable driver verification as explained here http://forum.xda-developers.com/showthread.php?t=2170114
Click to expand...
Click to collapse
tray some thing like this a minute ago on windows xp,
when a start phone with volume down S1 fast boot device is appear at 1-2 sec, i mange to change the driver manually and install it, but when a tray to connect phone in boot loader mode second time, nothing show in device manager
i think the problem is with s1 fast boot showing for short time and even i mange to install it i can't connect to phone because s1 fast boot is not working
@azizi_ppc
Have you installed the drivers from flashtool?
ChikeD said:
@azizi_ppc
Have you installed the drivers from flashtool?
Click to expand...
Click to collapse
No, because at the moment after tray to put xperia in bootloader i don't have s1 boot download to install drivers.
On xp a did it but nothing change.
I install flashtool on widnows 8 and in device manager i have "sony erricson seehcri control device"
azizi_ppc said:
No, because at the moment after tray to put xperia in bootloader i don't have s1 boot download to install drivers.
On xp a did it but nothing change"
Click to expand...
Click to collapse
Flash mode and fastboot drivers at the bottom of the list too?
ChikeD said:
Flash mode and fastboot drivers at the bottom of the list too?
Click to expand...
Click to collapse
Not sure what U mean
Devices manager list? After i plugin the phone in bootloader there is no new devices
ps.
1. download flashtool and install
2. type "bcdedit /set testsigning on" in cmd and restart PC
3. install driver in the flashtool "drivers" folder, check fastboot, agree when prompts
4. type "bcdedit /set testsigning off" in cmd and restart PC
5. go to "x10flasher_lib" folder flash whatever you want
how to install drivers when phone is not connected?
azizi_ppc said:
Not sure what U mean
Devices manager list? After i plugin the phone in bootloader there is no new devices
ps.
1. download flashtool and install
2. type "bcdedit /set testsigning on" in cmd and restart PC
3. install driver in the flashtool "drivers" folder, check fastboot, agree when prompts
4. type "bcdedit /set testsigning off" in cmd and restart PC
5. go to "x10flasher_lib" folder flash whatever you want
how to install drivers when phone is not connected?
Click to expand...
Click to collapse
Install the drivers on PC, phone disconnected.
Just follow steps 1 to 4 and see if it works.
ChikeD said:
Install the drivers on PC, phone disconnected.
Just follow steps 1 to 4 and see if it works.
Click to expand...
Click to collapse
How to install them, there are no installer exe in that folders, just zip pkg, and in them drivers files
Please try this proven way to install fast boot and flash drivers
http://forum.xda-developers.com/showthread.php?p=45473806
Sent from my Xperia Go using xda app-developers app
azizi_ppc said:
How to install them, there are no installer exe in that folders, just zip pkg, and in them drivers files
Click to expand...
Click to collapse
In flasgtool directory there is drivers directory the installer is there.
ChikeD said:
In flasgtool directory there is drivers directory the installer is there.
Click to expand...
Click to collapse
A LOT of people have been struggling to install drivers go have a look at all the troubleshooting threads if u try to fast boot or flash mode ur phone and u get the led for a second and then it goes off Plz Plz Plz try my method I've used on x go and x u been tested with x p all works fine its just a need to manually go and install the drivers
Sent from my Xperia Go using xda app-developers app
ChikeD said:
In flasgtool directory there is drivers directory the installer is there.
Click to expand...
Click to collapse
When i install this
http://developer.sonymobile.com/services/flash-tool/
there is no flashgtool directory