Hello, I have a little problem with my SGS 2. I had ICS stock ROM with Syiah Kernel it was fine, yesterday I installed the last version of Resurection Remix with Aroma and Syiah kernel. Today I wanted to flash an ICS stock firmware, everything was fine until the phone first boot, it entred on bootloop ( on S logo and its effect ). I tried 3 different ROMs from sammobile and even flash with .pit, but the same problem. What can I do? Thanks a lot
Sometimes it takes up to 15 minutes on the first boot. Did you wait that long? Is your phone rooted? If so, try latest Dorimanx kernel and RootBox 3.2.
JelliBeaned SGSII
Dorimanx 7.17
Modem BVLP7
RootBox 10/11 Nightly
JusTunBean 4.1 Apps
razvan0311 said:
Hello, I have a little problem with my SGS 2. I had ICS stock ROM with Syiah Kernel it was fine, yesterday I installed the last version of Resurection Remix with Aroma and Syiah kernel. Today I wanted to flash an ICS stock firmware, everything was fine until the phone first boot, it entred on bootloop ( on S logo and its effect ). I tried 3 different ROMs from sammobile and even flash with .pit, but the same problem. What can I do? Thanks a lot
Click to expand...
Click to collapse
Before Downgrading or upgrading with Diff version of Android build ( ICS > JB or JB > ICS) its better to do a Wipe Data/Factory reset to remove all the traces of previous install for a successfull flash of the new one
Try the same and see
Sun90 said:
Before Downgrading or upgrading with Diff version of Android build ( ICS > JB or JB > ICS) its better to do a Wipe Data/Factory reset to remove all the traces of previous install for a successfull flash of the new one
Try the same and see
Click to expand...
Click to collapse
Thanks, this worked for me!
Related
Hi guys i have a little dout about it
i've been flashing a few roms lately like the RESURRECTION and the FOXHOUND
my first room was the resurrection 9.5 an it was perfect but when i flash the 9.7 been havin kernel panic message and a few problems when typing messages in programs like Whatsapp where the background of the typing box shows Gray and all the hold press in here the menu shows BLACK and the letters black too, i have to guess whats the option i'm lookin for, (like the attached screenshoots)
then i though it was the rom so i flash another one that i hate it, then i flash FOXHOUND 0.5 and it runs well but have the same trouble with tex box and popup messages also some crashing promblems like the RESURRECTION, so by discarting it cant be the roms.
now thats the question it is the KERNEL?
my phone says i have
[email protected] #3
im not sure what kernel i installed it when i first install the stock ICS LPB to root the phone.
Any ideas? and what can i do?
MANY THANKS!!
Did you wipe before flashing? And if the problem occurred after some time then it's not kernel. If it happened after a kernel flash then it's kernel (although I doubt it).
You can always flash another kernel.
bpivk said:
Did you wipe before flashing? And if the problem occurred after some time then it's not kernel. If it happened after a kernel flash then it's kernel (although I doubt it).
You can always flash another kernel.
Click to expand...
Click to collapse
I wipe everything before every flash including dalvik cache thats what bothers me
and I've already flashed the latest Chainfire 5.4 kernel through CWM and the problem still there with my current ROM (foxhound)
the problem happens when i flash the RESURRECTION 9.7 and still there so thats why i think it wasn't the rom because it can be three roms in row with the problem.
getabu said:
I wipe everything before every flash including dalvik cache thats what bothers me
and I've already flashed the latest Chainfire 5.4 kernel through CWM and the problem still there with my current ROM (foxhound)
the problem happens when i flash the RESURRECTION 9.7 and still there so thats why i think it wasn't the rom because it can be three roms in row with the problem.
Click to expand...
Click to collapse
If you at the moment Remix 9.7 and from screen shoots I can see it`s theme bug. This version came with Vertumus theme build in. Change you rom or wait a Remix update. West was promise today will update.
078gregory said:
If you at the moment Remix 9.7 and from screen shoots I can see it`s theme bug. This version came with Vertumus theme build in. Change you rom or wait a Remix update. West was promise today will update.
Click to expand...
Click to collapse
But thats the strange thing because in the Foxhound also its happening and what about the KERNEL error messages some times in the remix 9.7, do far in Fox hound it havent happens since i flash it yesterday.
and just in case i have the international version of galaxy s2 i9000
I really hope so! i really love the Resurrection remix roms, and this FoxHound its very good too and its just BETA
here is a screenshot of the typebox bug.
Even with the new RESURRECTION 1.0 the problem insist on my phone, i even wipe all my data SD FORMAT, and before install WIPE DATA, CACHE, DALVIK, even BATERY STATS, and still the the bug insist i dont know what else to do! please help!!
it's starting to anoy me a lot!!
Flash a stock rom after a full wipe .
Test phone .
my phone says i have
[email protected] #3
It says SIYAH LPQ kernel
jje
JJEgan said:
Flash a stock rom after a full wipe .
Test phone .
my phone says i have
[email protected] #3
It says SIYAH LPQ kernel
jje
Click to expand...
Click to collapse
I flash the stock rom and it works great, son i flash the Resurrection and the same problem!!! almost cry!!
any ideas?
I've always used custom roms on my galaxy. I was even using in dual-boot, a Jelly Bean Revolt and other stock. I was testing a new stock, and flashed it with Odin Mobile. I ended up losing custom. Since then, I can no longer flashing custom roms, even having problems flashing a new kernel. I use the CWM, do the wipes and flash the* rom, but after the reboot, it starts a boot loop with the galaxy s2 logo. The phone is inoperable. At least the download mode works, and I ended up going back to stock a few times. I even tried and flash another custom roms, but the same problem happens.
Anyone know how to help??
gu_cad said:
I've always used custom roms on my galaxy. I was even using in dual-boot, a Jelly Bean Revolt and other stock. I was testing a new stock, and flashed it with Odin Mobile. I ended up losing custom. Since then, I can no longer flashing custom roms, even having problems flashing a new kernel. I use the CWM, do the wipes and flash the* rom, but after the reboot, it starts a boot loop with the galaxy s2 logo. The phone is inoperable. At least the download mode works, and I ended up going back to stock a few times. I even tried and flash another custom roms, but the same problem happens.
Anyone know how to help??
Click to expand...
Click to collapse
Flash a 3-parted stock firmware and activae "re-partition" in Odin.
After this flash a rooted kernel .tar (cf-root, speedmod, etc.) via Odin.
Now start flashing again.
Hope this works.
CHEERS
Hannibal226 said:
Flash a 3-parted stock firmware and activae "re-partition" in Odin.
After this flash a rooted kernel .tar (cf-root, speedmod, etc.) via Odin.
Now start flashing again.
Hope this works.
CHEERS
Click to expand...
Click to collapse
I've read about emmc brick. And this problem started after using a LQ6 4.0.4 stock rom.
I even used the "emmc brick check", and it shows "YES. Insane chip".
I flashed now a 2.3.6 stock rom. But i haven't tried to flash another custom rom yet.
Should i proceed as you say???
And sorry for my noobness, but what is a 3 parted stock rom?
gu_cad said:
I've read about emmc brick. And this problem started after using a LQ6 4.0.4 stock rom.
I even used the "emmc brick check", and it shows "YES. Insane chip".
I flashed now a 2.3.6 stock rom. But i haven't tried to flash another custom rom yet.
Should i proceed as you say???
And sorry for my noobness, but what is a 3 parted stock rom?
Click to expand...
Click to collapse
it contains a .pit file for re-partition and 2 other files,but u should be carefull in using the .pit file though, since it could potentially hardbrick ur device ma8
instead try updating ur device from GB 2.3.6 to a stock v4.0.3(do not flash any 4.0.4 ICS firmware) ICS firmware either thro 'KIES' or 'ODIN', then root ur phone and try installing a custom ICS rom of ur choice and see
Sun90 said:
it contains a .pit file for re-partition and 2 other files,but u should be carefull in using the .pit file though, since it could potentially hardbrick ur device ma8
instead try updating ur device from GB 2.3.6 to a stock v4.0.3(do not flash any 4.0.4 ICS firmware) ICS firmware either thro 'KIES' or 'ODIN', then root ur phone and try installing a custom ICS rom of ur choice and see
Click to expand...
Click to collapse
I'll try what you're saying.
I'm updating to a 4.0.3 through odin. After root, can i install directly a Jelly bean rom?
gu_cad said:
I'll try what you're saying.
I'm updating to a 4.0.3 through odin. After root, can i install directly a Jelly bean rom?
Click to expand...
Click to collapse
after root first install a custom kernel either siyah or dorimanx latest and then try installing a JB rom compatible with them and see
Sun90 said:
after root first install a custom kernel either siyah or dorimanx latest and then try installing a JB rom compatible with them and see
Click to expand...
Click to collapse
I've already updated to 4.0.3
If i'm flashing Jelly Bam Rom for an example, do i need to install these kernel before, since the rom already has it in the AROMA installer???
And should do the wipes before it/??
Thanks!
gu_cad said:
I've already updated to 4.0.3
If i'm flashing Jelly Bam Rom for an example, do i need to install these kernel before, since the rom already has it in the AROMA installer???
Thanks!
Click to expand...
Click to collapse
yes it will be there in Aroma but for a perfect trouble free install i suggested the same, rest is ur call ma8, fell free todo so the way it looks good for u
Sun90 said:
yes it will be there in Aroma but for a perfect trouble free install i suggested the same, rest is ur call ma8, fell free todo so the way it looks good for u
Click to expand...
Click to collapse
Thanks.
It only worked with with previous instalation of dorinmax kernel. So i had to use Revolt Jelly Bean Rom.
When i tried to flash Jelly Bam Rom, got into galaxy s2 loop, after reboot.
At least, i've got one custom rom.
Now it's so much more difficult to install a rom on my phone. Only because i used that 4.0.4.
There's no way back, right?
My warranty ends in November 30th.
:/
gu_cad said:
Thanks.
It only worked with with previous instalation of dorinmax kernel. So i had to use Revolt Jelly Bean Rom.
When i tried to flash Jelly Bam Rom, got into galaxy s2 loop, after reboot.
At least, i've got one custom rom.
Now it's so much more difficult to install a rom on my phone. Only because i used that 4.0.4.
There's no way back, right?
My warranty ends in November 30th.
:/
Click to expand...
Click to collapse
That's why I said to completely go back on a stock firmware with Odin.
But 3 parted (and for sure with .pit-file then, forgot to say this) and check repartition.
But u have to choose... A phone which turns screen on an just looping or a chance from 80% to 20% for getting phone working again or bricking it.
I personally hadn't any prob til now, but only went back 4-5 times ins 2-3 years (also did the same with SGS before SGSII)
So u got my answer u have to choose.
Anyway u can send it back because warranty and if they fix it, it's fine... If not u can try it by urself anyway
CHEERS
Send from my SGSII-i9100, running RootBox nightly with Dorimanx Kernel.
So i have X-treme ROM which is android version 4.2.2, and i want to switch to OMEGA ROM which is samsung base 4.1.2. but it seems to stuck on the loading screen. and yes, i did wipe data and factory reset and cashe and dalvik cashe (sorry if i spelled that wrong). now im not asking that omega isnt working. (i would then go ask the developer) im asking that, does upgrading to 4.2.2 prevents to switch back to 4.1.2? because it didnt also happened to me with OMEGA, but with others ROMS that have sammy base. and i also tried to flash 4.1.2 with odin all new clear without any root and ROM. but didnt work. so, does 4.2.2 prevent me to switch back to 4.1.2?
I have the same issue. MIUIv5 is based on 4.1.2 stock too and it does boot up. I think you could give a shot restoring a stock rom and flashing rom from base
Flaff! said:
I have the same issue. MIUIv5 is based on 4.1.2 stock too and it does boot up. I think you could give a shot restoring a stock rom and flashing rom from base
Click to expand...
Click to collapse
I tried that too. didnt work
Hi!
I bought a used SGS 2 really cheap yesterday as i lost my old one accidently last week.
Well, i know how to root, how to flash a kernel and rom and so on as i did it on my last SGS2. BUT, my last phone used ICS and this phone uses GB 2.3.5.
Well, i thought i just would root the phone, flash Siyah V5.0.1 and then the rom BUT after i flashed in Siyah, the phone wont start?! I boots trough both Siyah/Samsung logos but then it just turns white?!
What is it that i have to do to get my phone working with Omegas newest ROM and also with the newest Neatrom 4.8??
Do i need the dorimanx 9.sometin kernel for the newest OmegaROM? Which kernel for
I do have the insanechip and as i remember Siyah was the safest kernel last time i did theese kind of things?
So, can someone kindly guide me trough this as I am sure that I am missing something that f**ks everything up..
Thanks in advance //Mathias
Ok lets go:
1. Flash any stock jb 4.1.2 by odin
2.flash dorimanx 8.34.tar by odin
3.boot phone ,download hawkerpaul cleaning script
a.gs2romnuke
b.gs2kernelwipe
c.u can download dorimanx 9.35 or keep kernel wot come with rom its up to u
d.copy this scripts+kernel with ur omega rom to phone
4.boot into cwm and flash:
a.flash gs2romnuke.zip
b.flash rom
From hete depends from u or skip and go to 5.
c.flash gs2kernelwipe.zip
d.flash kernel
5.reboot and enjoy
Sent from my GT-I9100 using xda premium
I don't have SG2 but wont to help a friend to flash rom. He is currently on Omega ics v15 xwlpg and wont to flash Omega I9100 v24 XWLSW Final JB 4.1.2, have cwm recovery. So, just put new rom on sd, boot in to recovery, wipe and install, wright?
snebojsa said:
I don't have SG2 but wont to help a friend to flash rom. He is currently on Omega ics v15 xwlpg and wont to flash Omega I9100 v24 XWLSW Final JB 4.1.2, have cwm recovery. So, just put new rom on sd, boot in to recovery, wipe and install, wright?
Click to expand...
Click to collapse
Read the OP of the Omega thread. I imagine that'd be the steps, but you're always better off reading the OP.
Everything went fine, thanks.