I have rooted my SE Xperia Neo GB 2.3.3 FW 3.0.1.A.0.145 via DoomLord v4.But now i cant update my phone.I have tried several times to update manually via flash tool 0.9.9.0 on windows xp to FW MT15_4.1.B.0.431_Global.Every time when the software says plug my data cable by holding the back button it appears something like the attached image.I have tried PC Companion too but when i plug my data cable by holding the back key my pc hangs.I dont know that my bootloader is locked or unlocked.If possible give a link or something that describes step by step instruction.Please help me it really sucks :'(
Thanks in advance.
don't panic everything's fine !
goto ' c:\Flashtool\drivers\ ' and install the drivers for NEO !
and switch off any kind of AntiVirus Software to get sure.
try again.
greetings
P.S. " I have tried PC Companion too but when i plug my data cable by holding the back key my pc hangs "
Start your PC in ' Safe Mode or Fail Safe Mode ' and try with Back Key and PC Companion again, to install the Drivers !
Reinstall drivers they are in flashtool folder
Gl
seNt froM My bustEr Neo v
CooSeeS said:
don't panic everything's fine !
goto ' c:\Flashtool\drivers\ ' and install the drivers for NEO !
and switch off any kind of AntiVirus Software to get sure.
try again.
greetings
P.S. " I have tried PC Companion too but when i plug my data cable by holding the back key my pc hangs "
Start your PC in ' Safe Mode or Fail Safe Mode ' and try with Back Key and PC Companion again, to install the Drivers !
Click to expand...
Click to collapse
But how can i install driver.I downloaded an adb driver for neo but i cant find any exe file there.There are an exe file named Flashtool-drivers which i already installed but the same result.Can u pls tell me what should i do??? :'(
N!geR said:
Reinstall drivers they are in flashtool folder
Gl
seNt froM My bustEr Neo v
Click to expand...
Click to collapse
Reinstalled but the same result :'(
i assume you need the ' S1 ... ' Driver, to proceed in Flashmode.
start your PC in ' Failsafe Mode ' and plug your Phone while pushing the ' Back Key ' and the Driver will install without ' freezing ' the whole PC !!!
or you should try ' SUS - Sony Update Service ', download from Sony
http://www.sonymobile.com/global-en/tools/update-service/
greetings
Related
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Pull out your battery and then reinsert and use buttons to go to recovery ( volume down, home n power)
Sent from my LG-P500 using xda premium
JollyKing said:
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
Click to expand...
Click to collapse
if you have an X10mini (notPRO) and tried to install CM7 (i.e. miniCM7-2.1.3 or official CM)
you obviously forgot to read the first lines of my FAQ, so do it, and then, you'll have fastly working phone
Im not getting back into recovery at all :/ jus keeps rebooting to sony ericson screen
evil_chris said:
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Click to expand...
Click to collapse
I am Not seeing A repair function with the pc companion???
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
if you really want to use miniCM7 and have your BL unlocked, just flash nAa's kernel with flashtool
if not, you absolutely need to start from the beginning using SEUS, sorry (post 3 of my FAQ, you'll get links to debrick )
and read carefully everything before making mistakes
I was in the same situation. I installed minicm7 pro v20 and then it entered infinity loopboot. With luck, i pressed the menu button for some seconds just before "sony ericssom" appear and then i entered in the CWM 3.2 menu, where i did a restore.
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
the repair funcition is with the phone unpluged go to Pc companion > Suport zone > update your software > repair phone> then just folow what it say
try sony Ericsson update service it works for me :L
I have the same condition with neo V. PLS HELP ME TOO !!
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Sturdy_99 said:
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Click to expand...
Click to collapse
Don't worry if the Flashtool says 'USB debugging is disabled' if you enabled it before flashing it,it is because the Flashtool got a problem with connecting to your USB debugging feature in your phone...
About the bootloop,it is considered a softbrick as it can be fix as long as you can connect your phone to your PC in Flashmode
How to recover your phone back :
1.Go to wotanserver
2.Register and verify email if requested
3.Download wotanclient in the website
4.Download the needed driver in the website
5.Make sure you installed the thing that is needed thing before proceed
6.Open wotanclient
7.It will now start in Startup tab,wait for it if your wotanclient is auto updating
8.Now,after your wotanclient is updated,it will now currently in the Phone detection tab and asking you to connect your phone service button (for Xperia Neo V,I think it is back button)
9.Press and hold the service button and connect your phone to computer using USB
10.It will now connecting to your phone,and go into Phone setting tab
11.Enter your registered account and password,and click the 'Update' option and you should have a 1 credit result and something like that
12.After that,it will go to the setting tab,choose what your phone model is,and choose which phone firmware would you like to recovered into your phone
13.Choose your country Generic for the best result for your phone after recover your phone
14.Now,it will now download the file for your phone,it should take around 1-2 hours
15.After downloading,it will flash the phone automatically
16.After the phone got flashed,it will ask you to disconnect your USB and reboot your phone
17.Reboot your phone,and it will take sometime for the phone to create cache for your new system
18.Set your phone setting like the first time you buy your phone
19.?????????????
20.PROFIT
If you think my post help you,don't forget to click the Thanks button
I wil try it out.
THANKS FOR THE SOLUTION. I will try it out. Hope it WORKS...
Dude getting stuck at phone detection
i rooted my x10 mini and flashed it it stuck at se logo page.
wat to do now
i cannot use pc campanion without going to menu screen
i hav back up of previous os by using xrecovery wat shall i do
Hello,
i got a little Problem with my X10 (2.3.3 - rooted) and my Notebook (Acer - Win 7 64 bit).
I tried all ways to install the driver to use USB-Debugging but it won't install. The Device-Manager still tells me SEMC USB as unknown
I tried the usual way, start the phone with holding 'back', install the drivers manually...
Are there any other ways to get it working ?
Same goes for me,
Device manager states that the device is unknown, flashtool not working, PC companion no hope (connected to different USB ports including those of the motherboard).
it used to work but no chance now.
it charges normally from the USB (Orange LED) but would not connect to the PC.
Details:
Windows 7 x64
Gigabyte X58A-UD3R
Bootloader Unlocked Xperia X10 with 2.3.3 ROM and Doom's Kernel (the latest one)
The guy here says it is related to either windows windows update or faulty cable
http://android.modaco.com/topic/347751-flash-mode-not-working/
Didn't help...
But installing PC Companion did it
PC Companion install drivers automaticlly,that is the best solution.
RQ-1 said:
Didn't help...
But installing PC Companion did it
Click to expand...
Click to collapse
Sent from my xperia "z10i"
I tried removing and installing PC Companion but it didn't work either.
Any help guys?
Changing the computer had no effect as well
You must install SEUS ( Sony Ericsson Update Service ). Only SEUS will install right driver. Problem with SEUS is that when you look on SE official site, they tell you that SEUS for X10 no longer persist, and they guide you to PC companion which is crap.
Try this: try to connect your phone with PC, in flash mode. PC will try to install your phone driver but it can't find it. Then in Action Centar, on PC, (a small flag in sys tray, right down corner of a screen) find solution for this problem, and windows will automatically find SEUS over net. Install and enjoy.
from X10i via XDA premium
tried that but no luck as well (even in flash mode SEUS can not detect the device)
Thank you
hello i found a way and it worked for me download flash tool and extract it look for a folder called drivers in there u will find something called ggsetup-2.2.0.10
run this install it and all done
@huzi7868 thank you for your help
However, that didn't succeed and I reinstalled windows and drivers again, but still not working
Even no luck when the phone is in flashmode
Just tried it on a third Computer and checked the cable but the cable is working on another HTC Desire but not on my Xperia X10 (I mean my X10 cable), however they are both charging
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
a.monteiro said:
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
Click to expand...
Click to collapse
I agree, I also have solved in this way.
Download the latest version of Flashtool and after installing it you will find in the "drivers" folder the file "Flashtool-Drivers.exe".
Run it and select the drivers you need. Then connect again your Xperia X10
I really appreciate your help, but I had done that 3 times and on different computers but "USB Device not recognized"
As I sad before, use SEUS to install SEMC USB DRIVER. I have win 7 64bit, and I install driver on it. First, install Update service. When its finished, start Update Service and follow instruction (check "Licence Agree" button, and click next, then pick your phone, X10i I suppose, be carefull there is two X10, One is X10, and other is X10 SO-01b. I pick X10 for myself, and press NEXT. Turn off your phone, press and hold BACK button on phone while connecting with PC via USB. HOLD till you see message to release BACK button. Till then your driver will be installed.
Download SEUS from here http://www.megaupload.com/?d=SBDVZ3DG
@Dzufa Thank you, but I had done that before and tried it again, whenever I connect the phone pressing the back button the green LED illuminates and "USB device is not recognized" appears and nothing happen after that, SEUS just behaves like nothing is connected.
Try with this one. And I think you must be online, because SEUS must download some files.
I really did that and of course updated SEUS, as I said green LED illuminates and nothing happens even in flash tool (it used to work for ages but suddenly it stopped, it only charges)
BTW, I had flashed many kernels and ROMs before it happened so I am quite familiar with flashtool and SEUS, I unlocked the bootloader using 9lucas method and it worked after that I installed XSP ROM and the USB worked as well, however after 2 weeks or so, one day I left it connected it to the PC and I found that the phone turned off and refused to power on, I left it for a while in the charger then powered it on and it powered on, then it has refused to connect to the PC through USB since then.
in order to unlock the bootloader ... I found some problems
impossible to keep the fastboot mode!
after turned off the phone, pressed the button up, connect the cable to the PC at the same time => The blue LED lights but after 2 seconds it will turn off and the Sony logo appears
I tried again quite a few times but still the same result
tried on rom costums and also the stock jb .100
any help is welcome
thank you
dastane said:
in order to unlock the bootloader ... I found some problems
impossible to keep the fastboot mode!
after turned off the phone, pressed the button up, connect the cable to the PC at the same time => The blue LED lights but after 2 seconds it will turn off and the Sony logo appears
I tried again quite a few times but still the same result
tried on rom costums and also the stock jb .100
any help is welcome
thank you
Click to expand...
Click to collapse
Fastboot drivers installed(from flash tool or ither)?
What is your Windows version?
EDIT: for IDK what reason it's not recommended that you post your IMEI.... erase it
for the drivers, i install them from flashtool and abd installer!! all work fine... ( i supose :/ )
win 7 x64
Flashtool 0.9.11
i tryed also the flashtool method but it repport that the drivers are not installed
29/052/2013 12:52:41 - ERROR - Drivers need to be installed for connected device.
29/052/2013 12:52:41 - ERROR - You can find them in the drivers folder of Flashtool.
dastane said:
for the drivers, i install them from flashtool and abd installer!! all work fine... ( i supose :/ )
win 7 x64
Flashtool 0.9.11
i tryed also the flashtool method but it repport that the drivers are not installed
29/052/2013 12:52:41 - ERROR - Drivers need to be installed for connected device.
29/052/2013 12:52:41 - ERROR - You can find them in the drivers folder of Flashtool.
Click to expand...
Click to collapse
Did you install fastboot and fash mode driver from flashtool(at the bottom of the list)
Before you try to unlock or flash, just leave flashtoll open and connect in fastboot mode, if all is ok it will show in dlashtool window.
i think that is the worong!!! " install fastboot and fash mode driver from flashtool"
now all is fine!!! i'm unlocked
thank you very much
dastane said:
in order to unlock the bootloader ... I found some problems
impossible to keep the fastboot mode!
after turned off the phone, pressed the button up, connect the cable to the PC at the same time => The blue LED lights but after 2 seconds it will turn off and the Sony logo appears
I tried again quite a few times but still the same result
tried on rom costums and also the stock jb .100
any help is welcome
thank you
Click to expand...
Click to collapse
I have no issue at all... Just follow the instruction on how to install and make sure you have install the driver as well... I have problem before but that solo on my mistake... supposed vol + i press vol -... Hope this help u.
thank you Kvnlim!!!
the probleme is solved!
i forgete to " install fastboot and fash mode driver from flashtool"
dastane said:
thank you Kvnlim!!!
the probleme is solved!
i forgete to " install fastboot and fash mode driver from flashtool"
Click to expand...
Click to collapse
Glad it help you
1 install flashtool's dirvers.
2 power off the phone
3 press + first
4 then connect it to PC
5 first time it may fail, after PC load the dirvers completly it will be work!
Hi everybody,
first let me say thank you to this incredible community that saved my phones many times.
I received an xperia neo mt15i that is bricked. When I turn on the sony logo appear..after xperia logo and restart in loop mode. I don't know anything about what have done the last owner but I suppose he tried to change rom and made some mistakes. I tried many guides with flashtool, with emma, with update service..but nothing works. The point is that the phone is not recognised when I've to connect to start the process. If I press the back button when I'm connecting the cable a green light turn on (blue with menu botton) but is not recognised. What I can do?
Thank you very much!
P.s.: Sorry for my English !
Are ADB drivers correctly installed on your pc ?
Have you tried with another phone ?
I think that could be. I've downloaded the flashtool and in the folder drivers I started the program flashtool-drivers and installed all the drivers (just in case ) it's correct? I've to do other thinks ?
Dagh said:
I think that could be. I've downloaded the flashtool and in the folder drivers I started the program flashtool-drivers and installed all the drivers (just in case ) it's correct? I've to do other thinks ?
Click to expand...
Click to collapse
cant be windows 8
I'm using xp so I don't think. Few weeks ago I installed the adb drivers for a lenovo p770..maybe I've to uninstall it?
my z2 suddenly turned off.
and now always gets stuck at booting screen and then i have to reset it by using volume up+power key.
so i tried using the xperia companion but while using the repair service it as soon as the led light turns green on my phone my pc shows "usb device malfunctioned and cannot be recognised"
i dont know what to do now.
plzz help
Ritesh07 said:
my z2 suddenly turned off.
and now always gets stuck at booting screen and then i have to reset it by using volume up+power key.
so i tried using the xperia companion but while using the repair service it as soon as the led light turns green on my phone my pc shows "usb device malfunctioned and cannot be recognised"
i dont know what to do now.
plzz help
Click to expand...
Click to collapse
and here is the screenshot of the error
>> restart your PC first.
if it didn't work then..
>>just use flashtool,,, flash the ROM,, keeping data ..all safe.
>>it will be perfect!!
jeoleo7 said:
>> restart your PC first.
if it didn't work then..
>>just use flashtool,,, flash the ROM,, keeping data ..all safe.
>>it will be perfect!!
Click to expand...
Click to collapse
but hte flashtool doesnt work either
Ritesh07 said:
but hte flashtool doesnt work either
Click to expand...
Click to collapse
>>
does your phone stays switched off?
if not hold power and volume + until it vibrates 3 times
>>
check if you installed the drivers correctly
you may install it from C:/ flashtool/drivers
>>
open flashtool as administrator
>> disable windows defender or any anti virus.
>>
if it still persists uninstall flashtool and reinstall it.
let it sync for the first time as it asks.
>>
just prepare flashtool and be ready to flash in such a way that you will plug the USB connected to the switched off phone to PC only when it asks and keep holding the volume down key.
jeoleo7 said:
>>
does your phone stays switched off?
if not hold power and volume + until it vibrates 3 times
>>
check if you installed the drivers correctly
you may install it from C:/ flashtool/drivers
>>
open flashtool as administrator
>> disable windows defender or any anti virus.
>>
if it still persists uninstall flashtool and reinstall it.
let it sync for the first time as it asks.
>>
just prepare flashtool and be ready to flash in such a way that you will plug the USB connected to the switched off phone to PC only when it asks and keep holding the volume down key.
Click to expand...
Click to collapse
still not working...
You also need to disable driver verification to install the drivers properly! Look in advanced start up settings!
Sent from my D6503 using XDA-Developers mobile app
Chronic2k13 said:
You also need to disable driver verification to install the drivers properly! Look in advanced start up settings!
Sent from my D6503 using XDA-Developers mobile app
Click to expand...
Click to collapse
actually in win 10 you need to need t change that in recovery screen and i already did it, but the problem is still there
>> uninstall Flashtool
Remove the old folders also.
>>let Flashtool sync for the first time.
>>install everything properly.
>>this should work.
If not you may try this on other PC
Or may be friends Pc. ??
>> that will definitely help.
?
Use sony pc companion, not xperia companion. I had the same problem and i repaired it using pc companion. For me xperia companion did nt work.
Try an older version of Flashtool! I tried flashing an ftf using the latest version and encountered the same problem! But all was good when I installed version. 18
Sent from my D6503 using XDA-Developers mobile app
Maybe flashtool doesnt succeed cause if firmware has file fw.info
Try to unpack firmware and delete thaf fw.info file if exist and you wiill succed with flashing.
I had same problem with Z5 and I did like am wrote now.
Sent via Xperia Z2
I have the same problem....Did you manage somehow to solve it??