Hi Guys,
I've just updated to V2.6 but for some reason I keep getting the following message everytime i boot up and try to access apps menu, also my wallpaper keeps getting misaligned :- " Unfortunately, the process android.process.acore has stopped".
Any ideas?? Im thinking of upgrading to the latest Siyah Kernel V3.0
Usual is
A .Wipe Cache
B Wipe Dalvik Cache
C factory reset
D reinstall rom
jje
Ive already wiped the cache and delvik cache, only thing I havent done yet is factory reset, was going to do that last.
Backup.
Full wipe;
Format System
Factory reset
Wipe Cache
Wipe Dalvik (advanced)
Then immediately reflash
Don't restore system apps and data with Titanium etc.
Sent from my GT-I9100 using xda premium
I've done a cache wipe and a delvik wipe. This seems to of worked so far. Will keep monitoring. Thanks for your help guys.
Sent from my GT-I9100 using XDA
Im currently using ver1.0 Pro but cannot seem to download any other versions after that.
I tried even Infinitum Project, i cant seem to get it pass the start screen.(meaning before the boot animation). Similar when flashing RR ver1.1 onwards
I think i cannot go anywhere after android 4.0.4. I am only able to flash back to v1.0 (Android 4.0.3).
what could be the problem? help?
can u explain the process you followed for the installation of the other roms after 1.0?
oh sorry.
For the RR Pro 1.3
full wipe
installed rom
reboot.
Infinatium project,
Full wipe
installed rom
installed gapps
installed themed gapps
reboot.
I would usually just follow the instructions that are given.
sorry too I were configuring my cellphone, just flashed to the 1.3 and works fine...
sometimes my sd card give me problems and I remove from the device, maybe it's not your case...
and additional to the wipe, I wipe the dalvik cache, and then install the rom.
In the roms in wich I got troubles with the start screen or rebooting its because the baseband (LPQ in my case) and I'm serching foward about these thing...
sorry about my english, but its not my native languaje
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
jonsim86 said:
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
Click to expand...
Click to collapse
Apart from asking the dev i suggest a full wipe and clean flash may cure the usual Kernel Panic .
jje
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
jonsim86 said:
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
Click to expand...
Click to collapse
wipe data,cache,dalvik cache and format system from mount and storage.
after installing also wipe cache and dalvik cache then reboot.hope this solves ur problem.
meaning to say i should delete everything in my storage and sd card? like format the memory?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
formatting system doesn't format ur sdcard data, it only
formats system folder.
sorry im quite a noob so... how do i format the system?
jonsim86 said:
sorry im quite a noob so... how do i format the system?
Click to expand...
Click to collapse
go to recovery mode then mount and storage and select format system.
giving it a try. Thanks
i just cant seem to install anything after v1.
from v1. siyah kernel v3.
did a data wipe
cache wipe
format system
divak wipe
install rom
install gapps fix
reboot
it just get stuck at start up before the bootanimation. why?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
yeap it just clears the system data, then you can do a clean flash from there. that should do it
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
jonsim86 said:
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
Click to expand...
Click to collapse
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Azure Flame Kite said:
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Click to expand...
Click to collapse
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
MyLifeRocks10 said:
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
Click to expand...
Click to collapse
If you just relax for a minute , take a deep breath and start from the beginning. Listen to what people are telling you. Follow step by step from the beginning. Read what the developer says on flashing the rom and then it will work. Almost impossible not to get the rom working after that. It will all come together mate. Read a lot of posts. Good luck.
Sent from my GT-I9100 using xda premium
Hello!
I've been having really really weird problems with my phone and CWM.
Right now I have latest stable CM installed.
Today I decided to switch to ParanoidAndroid.
I got the right ROM, but I installed the wrong google apps the 4.2.2 one.
Now I get a crash when I try to use the keyboard so I decided to flash it again.
I went back into CWM.
Factory reset, deleted cache, wiped dalvik cache.
Installed the same .zip file I did the first time for Paranoid Android except I didn't install Google Apps.
I restart the phone and it doesn't seem to have flashed, it's the one with 4.2.2 GAPPS.
I've tried wiping it 3 times.
I decided to check internal storage on my phone and this is what I see.
I don't think it's supposed to look like this after I just did a factory reset. Right?
http :// puu.sh/5gzsb.png
http :// puu.sh/5gzsR.png
(I can't post links yet)
Right now I just want to hard reset my phone and install PA.
EDIT: I just Factory Reset, Wiped Cache and dalvik restarted my phone and I'm back to the PA ROM with GAPPS 4.2.2
via CWM
go to mounts & storage >> Format system
then
wipe data/factory reset
wipe dalvik cache
flash ROM
Flash Gapps
Flash Desired kernel (if any)
Reboot
everything should be Fine
And for next time I suggest you use philz recovery, it has a clean install options in wipe data/factory reset, it should help you
I have put this rom on my Tab P7510 Wifi and I have some problems. Interruption Hangoot, Web sometime not see the pasge, I am connected and I see just 1 min and stop. I have install gapps http://forum.xda-developers.com/showthread.php?t=2397942 that I take here.
I have made instal again
Wipe data factory reset
Wipe cache partition
Wipe dalvik cache dans Advanced
and the problem is always the same.
Thank you for your help
Hi guys im an xperia s LT26i user and i have an unlocked bootloader. Im currently running cm11 rom by raymanfx. The last time i tried to flash 4.1.2 rom i did NOT wipe system and i ended up getting a bootloop and soft brick. So if i am running cm11 and if i want to downgrade to 4.1.2 do i need to wipe system, data, cache and dalvik cache? cache and dalvik is a must but if i wipe system and data will it work?
You should make a full wipe probably everytime you switch your ROM. So:
- factory reset
- wipe dalvik cache
- format system
So your entire system is clear and if this don't work flash latest Stock ROM first and then the ROM you'ld like to run on your phone
lol98lol98 said:
You should make a full wipe probably everytime you switch your ROM. So:
- factory reset
- wipe dalvik cache
- format system
So your entire system is clear and if this don't work flash latest Stock ROM first and then the ROM you'ld like to run on your phone
Click to expand...
Click to collapse
Ok so i formatted my whole phone with the suggestions you gave and when i flashed the existenz rom by niaboc79 which is the stock rom it says "E:Error executing updater binary" and "Error flashing zip" and im on TWRP Recovery mod version 2.6.3.0
Ok i fixed it i just had to flash doomlord kernel which gets me back to cwm then flashing again fixed the problem. Thanks alot for your help though it did help me at some stages.