Good afternoon.
I'm having problems with wifi Android 2.3.4
I downgraded from 4.0.4 to 2.3.4 and there're experiencing the following problem.
When I connect to wifi, my router is restarting direct. I can not be more than 10 seconds connected, the funnier it is than the other phones, the wifi works normally, without rebooting and such. My router is the WRT54G. How do I solve this problem?
Try reinstall the stock firmware
Via flashtool bro
u can find a tutorials on stickies
Não adiantou... Continuo a mesma coisa. O estranho, é que nos outros roteadores, ele pega normalmente... E no meu roteador não.
Detalhe: Os outros celulares estão pegando normalmente no meu roteador.
rafaaroma said:
Não adiantou... Continuo a mesma coisa. O estranho, é que nos outros roteadores, ele pega normalmente... E no meu roteador não.
Detalhe: Os outros celulares estão pegando normalmente no meu roteador.
Click to expand...
Click to collapse
???
English dude !!
Pandemic said:
???
English dude !!
Click to expand...
Click to collapse
It did not help ... I remain the same. The strange thing is that the other routers, it usually takes ... And not on my router.
Detail: The other phones are usually picking on my router.
Related
Hello,
I have a tablet version 2.2 android model LY-F526 (N706A). When you connect a 3G modem Huawei the tablet through programs of self APN setting provider can properly detect the SIM card I'm using the modem. He also, through programs can inform me of the RF signal network that the modem is receiving.
However, it does not ever connect. What may be missing?
In official settings it only has the Android:
Mobile Networks
data Enabled
Auto connect
Nothing More.
The ROM I am using is 829, last available for him.
http://www.chinadigitalcomm.com/post21652.html
Portuguese:
Possuo um tablet android versão 2.2 modelo LY-F526 (N706A). Ao conectar um modem 3G Huawei o tablet através de programas de auto configuração de APN consegue detectar corretamente o provedor do cartão SIM que estou usando no modem. Ele tambem, atraves de programas consegue me informar o sinal RF da rede que o modem está recebendo.
Porem, ele não conectar nunca. O que pode estar faltando ?
Nas configurações oficiais do Android ele só tem :
Redes Móveis
Dados Ativados
Auto connect
Nada Mais.
A ROM que estou usando é a 829 , ultima disponivel para ele neste forum:
http://www.chinadigitalcomm.com/post21652.html
i was playing pollushot on my x10 mini with gingerdx v17 for stock kernel when the phone just turn off, and now it isn't turning on, i can't even enter in flash mode
Same here
Mine too!!! I had GingexDX v013 stock kernel installed and suddenly it stops working.
PS: I think it´s nothing related to GingerDx but who knows.
bolajones said:
Mine too!!! I had GingexDX v013 stock kernel installed and suddenly it stops working.
PS: I think it´s nothing related to GingerDx but who knows.
Click to expand...
Click to collapse
but your phone is working now?
mas o seu celular esta funcionando agora?
brenorc97 said:
i was playing pollushot on my x10 mini with gingerdx v17 for stock kernel when the phone just turn off, and now it isn't turning on, i can't even enter in flash mode
Click to expand...
Click to collapse
Take batterycover of, remove black rubberthing left of the lense and then unplug the batteryconnector under the rubberthing.
Connect it back and try again.
If nothing, leave on charge for some time.
alive but no SIM card
I did this rooterdam some days ago. Today I left my phone charging for a very long time and it become alive again! thanks to xda crew!
But now I realized that SIM card is not being recognized. Someone could help me with this?
Cheers
bolajones said:
I did this rooterdam some days ago. Today I left my phone charging for a very long time and it become alive again! thanks to xda crew!
But now I realized that SIM card is not being recognized. Someone could help me with this?
Cheers
Click to expand...
Click to collapse
I would just flash the newer Kernel and then boost the phone with the latest ROM, wether GDX or CM7.
Believe me when I say you will see a world of difference.
yeahh
Thanks. Both are awesome and I'll try it to see if fixes my SIM card.
Weird
That's weird! My phone is bricked again.
I've removed SIM, turn on, then turn off and insert back SIM card. Phone recognized SIM and signal was great. Then I try to root with SuperOneClick but no response and now just not turn on.
I'll try to do all passes again to see.
bolajones said:
That's weird! My phone is bricked again.
I've removed SIM, turn on, then turn off and insert back SIM card. Phone recognized SIM and signal was great. Then I try to root with SuperOneClick but no response and now just not turn on.
I'll try to do all passes again to see.
Click to expand...
Click to collapse
gingerdx is overclocked by default to 710Mhz hope it's not cpu burned...
hoping everything will turn right
I hope not! I'm not a fan of OC. I think only users could change this on theirs devices as wanted. Until now my phone is dead.
erm... Hello, this ain't general or Q&a. Please do not post your queries in development section.
Sent from my X10mini using XDA App
bolajones said:
I hope not! I'm not a fan of OC. I think only users could change this on theirs devices as wanted. Until now my phone is dead.
Click to expand...
Click to collapse
You can restore your phone using pc compasion or seus.
Cara o interessante seria vc primeiro tentar flashar o seu cel, para uma rom original, tenta usar o flashtool 0.2.9 e uma rom como a E10i--X10 mini_1.0_2.1.1.C.0.0.ftf não é a mesma rom q vem no cel q é a E10a, mas funciona de boa, eu falo isso pra vc primeiro ver se há um problema com o seu cel, usando uma rom original por pelo menos uma semana, já usei essa ai por muito tempo e td funciona, tenho chip da oi e moro em goiania, e caso o celular n tiver respondendo na hora de flashar, tenta o seguinte: abra o flashtool e ja deixe o celular plugado no pc, dai clique em flash e escolha a rom, lembrando que ela tem que ta no diretorio de firmware, quando abrir a janela pedindo pra plugar o cel apertando o botão back vc faz o seguinte, segura o back o quadrado (do meio) e o botão de ligar o cel, td junto quando o cel reiniciar solta deixando so o back precionado, quando o flashtool pedir pra soltar vc solta ee ele da continuidade flashando o cel, e uma dica quando for rootear o cel, para poder voltar para as roms não oficiais, usa o proprio flashtool é bem mais seguro, com o celular conectado ao pc é so clicar em root que ele faz td, o programa ainda instala o xrecovery caso precise, e se for querer usar as novas roms que precise mudar o kernel é só perguntar. Ficou meio longo mais tomara que ajude. flw
---------- Post added at 10:07 PM ---------- Previous post was at 10:03 PM ----------
opa eu de novo nem vi e tem uma amigo aki que postol a rom q vem no cel, tenta com essa ai http://forum.xda-developers.com/showthread.php?t=1294579
I don't know if its your case or not but yesterday i was using my phone and i rebooted it into recovery. And it seemed to be dead because it didn't turn on so i was afraid i bricked my phone because it didn't react to anything, nor charging, nor connected to PC... So i found something it worked, press turn on button plus home button so it vibrated and it came to live again. Hope it helps
phenriqueff said:
Cara o interessante seria vc primeiro tentar flashar o seu cel, para uma rom original, tenta usar o flashtool 0.2.9 e uma rom como a E10i--X10 mini_1.0_2.1.1.C.0.0.ftf não é a mesma rom q vem no cel q é a E10a, mas funciona de boa, eu falo isso pra vc primeiro ver se há um problema com o seu cel, usando uma rom original por pelo menos uma semana, já usei essa ai por muito tempo e td funciona, tenho chip da oi e moro em goiania, e caso o celular n tiver respondendo na hora de flashar, tenta o seguinte: abra o flashtool e ja deixe o celular plugado no pc, dai clique em flash e escolha a rom, lembrando que ela tem que ta no diretorio de firmware, quando abrir a janela pedindo pra plugar o cel apertando o botão back vc faz o seguinte, segura o back o quadrado (do meio) e o botão de ligar o cel, td junto quando o cel reiniciar solta deixando so o back precionado, quando o flashtool pedir pra soltar vc solta ee ele da continuidade flashando o cel, e uma dica quando for rootear o cel, para poder voltar para as roms não oficiais, usa o proprio flashtool é bem mais seguro, com o celular conectado ao pc é so clicar em root que ele faz td, o programa ainda instala o xrecovery caso precise, e se for querer usar as novas roms que precise mudar o kernel é só perguntar. Ficou meio longo mais tomara que ajude. flw
---------- Post added at 10:07 PM ---------- Previous post was at 10:03 PM ----------
opa eu de novo nem vi e tem uma amigo aki que postol a rom q vem no cel, tenta com essa ai http://forum.xda-developers.com/showthread.php?t=1294579
Click to expand...
Click to collapse
Si!
did you tried with pc companion??
amigos do android socorro
meu galaxy tab gt-p6200l nao quér ligar mais ,só fica reiniciando e nao sai disso.
isso porque cometi uma grande besteira de tentar subistituir uma pasta chamada app que se encontra dentro da pasta system,pela mesma que eu tinha copiado para o cartao de memoria,usando o root explorer.
no meio desse procedimento o tablet apagou, e agora ele so fica reincindo. será que tem jeito dele voltar a funcionar?
nao entendo nada de android.
eu sei que o meu é o 3.2
UMA LUZ POR FAVOR: Chorando: por favor alguem póde me passar um tutorial detahlado para resolver isso agradeço muito desde ja
Please use English in Forums.
By translating using Google Translator:
[DOUBT] [help] tab galaxy gt-p6200l just keeps resetting
android friends rescue
My gt-p6200l galaxy tab will not turn over, just keep restarting and not leave it.
because it made a big mistake of trying subistituir a folder called app that is inside the system folder, the same that I had copied to the memory card, using the root explorer.
Through this procedure in the tablet went out, and now he is so reincindo. will be having his way back to work?
not know anything about android.
I know mine is the 3.2
A LIGHT PLEASE: Crying: please could someone pass me a tutorial detahlado to solve this thank a lot since ja
Click to expand...
Click to collapse
From the problem, it seems you have messed up your system apps. And without no doubt maybe that's the reason for constant reboot. If you are not experienced in Android, then please don't play with root or do so. Rooting has got nothing to do for a normal user.
Anyways I'd suggest you to reflash the stock firmware of Galaxy tab. Firmwares could be found in www.sammobile.com. I guess this is the firmware you're looking for, but not sure, do more research. And instructions on flashing could be also found on that site.
~Cheers.
I have tanix tx9 s905w, I recently tried to install atvxperience firmware using usb burning tool v2.1.6, NO SUCSSES.
I have the same problem, and I haven't found the solution anywhere. Board RED CS_905W_TX_V1.2
hello, I need the ROM of this Box, if anyone can make it available, but the version of my card is: CS_905W_TX_V1.2
This is the board.
<img src="https://i.ibb.co/WPHCPzg/72467323-2534550966620453-4536635652522901504-o.jpg" alt="72467323-2534550966620453-4536635652522901504-o" border="0">
mesmo problema que eu tenho
rapht1 said:
I have tanix tx9 s905w, I recently tried to install atvxperience firmware using usb burning tool v2.1.6, NO SUCSSES.
I have the same problem, and I haven't found the solution anywhere. Board RED CS_905W_TX_V1.2
hello, I need the ROM of this Box, if anyone can make it available, but the version of my card is: CS_905W_TX_V1.2
This is the board.
<img src="https://i.ibb.co/WPHCPzg/72467323-2534550966620453-4536635652522901504-o.jpg" alt="72467323-2534550966620453-4536635652522901504-o" border="0">
Click to expand...
Click to collapse
Estou buscando mas sem sucesso
the firmware
paulosdjr said:
Estou buscando mas sem sucesso
Click to expand...
Click to collapse
hi this is the firmware
This firmware is for both red and blue cards, but for red cards it may not be re-registered.
send me email because xda
don't post external links yet
[email protected]
joelunatic said:
hi this is the firmware
This firmware is for both red and blue cards, but for red cards it may not be re-registered.
send me email because xda
don't post external links yet
[email protected]
Click to expand...
Click to collapse
paulosdjr said:
Estou buscando mas sem sucesso
Click to expand...
Click to collapse
[US-EN]
Hey Guys,
After a huge research i found a Yandex drive with several ROM's for TX9 (its the same hardware from TX3 mini with a TX9 box).
LInk https://yadi.sk/d/jMPL4mEbCF9h8g
PM me if you need any help.
[PT-BR]
Pessoal,
Fiz uma mega pesquisa e achei um drive com varias ROM's para o TX9 (que na real é o TX3 mini)
Link https://yadi.sk/d/jMPL4mEbCF9h8g
Manda mensagem caso precisem de ajuda.
joelunatic said:
hi this is the firmware
This firmware is for both red and blue cards, but for red cards it may not be re-registered.
send me email because xda
don't post external links yet
[email protected]
Click to expand...
Click to collapse
EN
You email is incorrect.
PT-br
Seu email está incorreto. Por favor, entre em contato [email protected]
TX3 MINI(Fake) Brick
I also have same red board CS_905w_tx_v1.2 (TX3 MINI) but I think it is also fake one because on the box its written Cherry V2 Pro, I tried installing atvXperience through SDCard after completion of updating bar blue screen appears boot written on display of device I waited for some time and then remove the power cable after that is does not give any display only blue screen and red light on back of the device, I tries Amlogic USB Burning tool but after connecting and push start button it stops on 1% and give error, after that I tried many roms including TX mini one but no luck , Please suggest me solution to solve this problem. I am attaching pictures of device and current status.
hi dear frieds. any one found this firmware rom....????
POis é essa porcaria de placa é importada por uns caras no centro de SP e aparece na caixa iJack e os caras não tem um pingo de vontade de compartilhar o arquivo, então ficamos nesse empasse, um absurdo. Plaquinha com memoria samsung e emmc Samsung até aí ótimo, mas uma montagem meio porca, o P2 soldado torto... esse android mal feito. O Android da tanix esqueçam. Se funcionasse seria uma benção .
paulosdjr said:
Estou buscando mas sem sucesso
Click to expand...
Click to collapse
Oi bom dia conterrâneo alguma novidade por um acaso o android que você comentou é da placa vermelha?
herr_marechal said:
Oi bom dia conterrâneo alguma novidade por um acaso o android que você comentou é da placa vermelha?
Click to expand...
Click to collapse
to com mesmo problema .. o meu é da placa vermelha .. so fica a luz atras .. cheguei a instalar a rom so que agora nao reconhece na usb nem nada.. queria uma forma de dar reset forçado na placa
Did Someone Solved this problem ? i have same problem, when i try flashing it's always stuck on 1% and it's say Cannot FInd DDR_ENC.USB, how to fix it ??
joelunatic said:
[email protected]
Click to expand...
Click to collapse
your email seems to be wrong
Did anyone found it yet?
Hi!
Today I unlocked bootloader and tried to root the phone. After flashing Magisk patched boot.img phone did boot but touch screen did not work. Me being silly, tried different things and right now phone doesn't boot. I can still get to bootloader and recovery. Is there any way for me to flash full stock rom to fix that?
I know I was stupid.
Hoping that somebody can help me,
mectax
Try https://support.motorola.com/uk/en/...oto-g-family/moto-g8-power/documents/MS140571 see if it helps
pamplinas said:
Try https://support.motorola.com/uk/en/...oto-g-family/moto-g8-power/documents/MS140571 see if it helps
Click to expand...
Click to collapse
Thank you very much, I'll give this a try tomorrow!
EDIT: PROBLEM SOLVED - Used Lenovo's Rescue and Smart Assistant
pamplinas said:
Try https://support.motorola.com/uk/en/...oto-g-family/moto-g8-power/documents/MS140571 see if it helps
Click to expand...
Click to collapse
Will this rescue a hard bricked device??
If the touchscreen didn't work then that usually means you flashed a different version of the kernel / signed differently. If you can get the stock boot.img and flash it...it should recover itself also.
Adge40 said:
Will this rescue a hard bricked device??
Click to expand...
Click to collapse
Any info on this please?
darko454 said:
Any info on this please?
Click to expand...
Click to collapse
Hard bricked as in no bootloader or can you get to the bootloader. If you can't get to the bootloader does a computer recognize anything in the device manager when its plugged in?
I was having issue with google services on my new phone that i got from Amazon. So I did factory reset few times but still having issue so i thought flashig might help and i used Mototola tool Rescue and smart assistant and found correct version of moto g8 power lite XT2055-2. But after flashing my phone just hard brick. No power on, not going to recover model, don't charge when plgged in and don't even recognised by laptop when i plug in. The only thing i can see when plug into laptop or power source is red tiny light whic you normally get while charging. other wise phone is dead. I tried SP flash tool but got error as soon as click download. And error is ;
ERROR: STATUS_BROM_CMD_SEND_DA_FAIL_(OxC0060003)
Can somebody please help. I did eevn used for a single day. I bought it open box like new.
coolarun1980 said:
Eu estava tendo problemas com os serviços do Google no meu novo telefone que recebi da Amazon. Então, eu fiz a redefinição de fábrica algumas vezes, mas ainda com problemas, então pensei que o flashig poderia ajudar e usei a ferramenta Mototola Rescue e o assistente inteligente e encontrei a versão correta do moto g8 power lite XT2055-2. Mas depois de piscar meu telefone apenas tijolo duro. Não liga, não vai recuperar o modelo, não carrega quando conectado e nem é reconhecido pelo laptop quando eu conecto. A única coisa que posso ver quando conecto o laptop ou a fonte de alimentação é uma pequena luz vermelha que você normalmente obter durante o carregamento. outro telefone sábio está morto. Eu tentei a ferramenta flash SP, mas recebi um erro assim que cliquei em download. E o erro é;
ERRO: STATUS_BROM_CMD_SEND_DA_FAIL_(OxC0060003)
Alguém pode por favor ajudar. Eu eevn usado por um único dia. Comprei caixa aberta como nova.
Click to expand...
Click to collapse
OLÁ AMIGO ESTOU COM O MESMO PROBLEMA MEU APARELHO É O MOTO G8 POWER NAO CONSIGO ENTRAR NO BOOTLOADER NAO CARREGA QUANDO CONECTADO NO CARREGADOR NEM O PC RECONHECE ELE NAO LIGA, VOCE CONSEGUIU RESOLVER OU ALGUEM PODE ME AJUDAR?