Hi all, I've tried to redo the gold card process successfully but the issue still does not change the radio is a radio 16.xxxxx and try and try and not change a radio 17.xxx, download the same files I and I think there is some 16.xxx radio link with files to make the gold card and have the radio 17.xxxx and I think I have to have the HSPL 2.6? someone please help me or give me the right to have a radio link 17.xxxxxx, my phone is already unlocked ATT Titan with HSPL 2.5 and 16.xxxxx radio.thanks
same thing happened there
But you can try my method
http://forum.xda-developers.com/showthread.php?t=2028665
Related
Only one short question! -Only one short answer! ;-)
I´ve flashed my hermes to the 1.35 radio rom. Now iam getting these ****ty
radio waves signals out of the hermes´s earspeaker . And it is possible that i have to send in my device, because i have several problems with sending sms. Because of these things it would be very nice if it is possible to flash back to the shipped version of the Radio Rom(1.27.00.00)
I tried to flash back with
RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe
and it completed succesfully but on the hermes is still the 1.35 Version of the radio rom.
THX
You will need the sspl version of the installer. It can be downloaded here.
hmm, so i took the wrong radio ROm version?
on this site:
http://forum.xda-developers.com/showthread.php?t=291827
i took the first one because i have a herm300 from t-mobile.
So i only have to flash with the version you gave me, and thats all?
Update radio without Activesync connetion
Can I update this rom version without any activesycn connection. My HTC TYTN is hang out after rom dwwongrading and now it start unitl windows loading screen. I think that only alternative is download new rom with help of three colour screen usb connetion or with help of mtty program. My bootloader version is 1.09
Please let me know your opinions,
Juha
@Miliano: you are correct. The sspl download for v1.27 was created by wpbear.
Unbelievably, I found the link for you by looking in the Hermes WiKi....
@frontpage: sspl based flashing won't work unless windows mobile can load
I have just downloaded and run this file with my phone attached to my computer and Activesync 4.5 running etc ->
RUU_Hermes_DOPODASIA_WWE_3.54.707.3_6275_1.47.00.10_108_Ship.exe
It went ok to the point where it said Invalid Operator ID or something similar, in other words, silly old Orange have stopped the upgrade from going through somehow. What are my options now? I'm guessing its still possible to upgrade (although i don't know how, as i'm very novice at upgrading phones!)
please let me know what i can do now.
hi i have a a orange spv m3100 and recently put on a wm6 rom upgrade found here:
http://forum.xda-developers.com/showthread.php?t=320829
i did put hard spl v7 on before i upgraded to this. it all worked fine and i was not stopped by orange as it lets you put roms on that are not the same CID as your device
http://forum.xda-developers.com/showthread.php?t=296722
hard spl v7 is on this page and once that is on your hermes the rom should go on easily
ok will look into that, thank you.
a friend at work suggested using the Black firmware, would that be advisable? he has had success with it.
warsng said:
I have just downloaded and run this file with my phone attached to my computer and Activesync 4.5 running etc ->
RUU_Hermes_DOPODASIA_WWE_3.54.707.3_6275_1.47.00.10_108_Ship.exe
It went ok to the point where it said Invalid Operator ID or something similar, in other words, silly old Orange have stopped the upgrade from going through somehow. What are my options now? I'm guessing its still possible to upgrade (although i don't know how, as i'm very novice at upgrading phones!)
please let me know what i can do now.
Click to expand...
Click to collapse
The reason you get an invalid vendor ID is because you havent put HardSPL on, and your CID doesnt match that of a dopod device (see the filename). CID is something you NEED to know about before flashing stuff dude, the more reading you do the better you will understand the device and the flash process. These devices are shipped with a CID which restricts them to use only ROMs intended for them....so your device will only flash Orange ROMs in its current state.
ok i have got as far as flashing the Pro Black 3.0.1 rom, it went well, only thing was, the phone was still locked after the upgrade, so i just ran the v3a unlocker on it, and it has now been unlocked.
my question now is why did it change the radio? what radio is best for the SPV M3100?
I should mention i am in the UK.
What was the radio before? Check what your friend has as this may be the best. Don't go for the latest update and Make sure you use the sd card method to flash (less things go wrong as it is dependant on the sd card inserted in your phone and your battery being charged, NOT on a flaky usb cable and pc that can be pulled out or reset/turned off). This is the riskiest part to flash making almost 100% permanent bricks if there is a problem.
My advice, use the one that your friend is using (if he knows anything about flashing he probably is a ppc flashing junkie like just about everyone else here) and use the sd card method.
As a footnote, radio roms are carrier specific - your carrier decides what is the best radio rom and using the wrong one means call dropouts and/or severe battery drainage or you.
Cheers...
ultramag69 said:
What was the radio before? Check what your friend has as this may be the best. Don't go for the latest update and Make sure you use the sd card method to flash (less things go wrong as it is dependant on the sd card inserted in your phone and your battery being charged, NOT on a flaky usb cable and pc that can be pulled out or reset/turned off). This is the riskiest part to flash making almost 100% permanent bricks if there is a problem.
My advice, use the one that your friend is using (if he knows anything about flashing he probably is a ppc flashing junkie like just about everyone else here) and use the sd card method.
As a footnote, radio roms are carrier specific - your carrier decides what is the best radio rom and using the wrong one means call dropouts and/or severe battery drainage or you.
Cheers...
Click to expand...
Click to collapse
very foolishly, before flashing the phone with the unlocker, i didnt check the radio ROM. (though i have a feeling it was around the 1.38-1.48 mark)
i'm on Vodafone though. Isn't there one standard radio (to rule them all) that most of us in the UK can get away with?
edit: im looking at the HTC Official Europe WM6 rom that comes with the built-in 1.48 radio, it would make sense that they know what the best radio is, since they make the phones...
mrvanx said:
The reason you get an invalid vendor ID is because you havent put HardSPL on, and your CID doesnt match that of a dopod device (see the filename). CID is something you NEED to know about before flashing stuff dude, the more reading you do the better you will understand the device and the flash process. These devices are shipped with a CID which restricts them to use only ROMs intended for them....so your device will only flash Orange ROMs in its current state.
Click to expand...
Click to collapse
after much reading of the threads on this forum, its starting to make sense.
one thing i still am not sure about is SSPL.
Should booting into the SSPL bootloader allow me to flash *any* rom, cos thats what this thread is claiming -> http://forum.xda-developers.com/showthread.php?t=293651
but when i just now tried starting the SSPL-HERM.exe and then running the HTC WM6 firmware that i found through a bit of guesswork, it still got to the same Invalid Vender (sic) ID part!
Am i using the SSPL-HERM file the right way?
about the radio i am using vodafone as i unlocked my spv i have 1.47.30.10 found on this thread:
http://forum.xda-developers.com/showthread.php?t=326995
this is working well for me at the moment.
as for your question about flashing the roms i use the hard spl v7 which i flashed the offical htc rom with i then used this:
http://forum.xda-developers.com/showthread.php?t=293665
to unlock my phone and super cid it i have since flashed black satin and schap's wm6 pro 4.31 and both went on fine
gd luck ask if ur not sure about any of this
Flash Hard SPL back on as it has been downgraded to 1.10 olipro instead of 2.10 olipro. This is for safeties sake.
You don't need to use sspl to flash os's from the sd card IF you have SPL 2.10 olipro installed. Just rename the .nbh file (on sd card) to hermimg.nbh and reboot into bootloader with sd card inserted. Too easy..
Cheers...
Hello guys, I have a little bit of a problem, and I am hoping that you guys can help me out. About 10 months ago I upgraded from my stock ROM to dcd's 2.3.2. rom and 3.27.00 radio. Every thing went fine, loaded up 2.40 olipro and the installation went perfect. Now last month I saw that dcd came out with 3.2.6 and wanted to upgrade my rom and radio, but this is were i'm running into problems. I was able to flash the 3.2.6. rom, but I am unable to flash the radio. I have searched up and down these forums and checked out the wiki's and havn't been able to find a solution. So now all i'm left with is a phone that can't make a phone call but is still able to send sms messages. If anyone has any helpful tips or even a solution to my problem it would be much appricated.
I thought the 3.27 radio works with 3.2.6. What is happening when you try to flash the radio? and what method are you using to flash it (SD card or pc)? Also when you bootup the phone does it say 3.27 radio still? I believe all the newer DCD roms need a carrier cab have you installed the cab? I'm pretty sure the phone won't be able to make calls without the cab installed. 1 more Q what service do you have?
shield001 said:
I thought the 3.27 radio works with 3.2.6. What is happening when you try to flash the radio? and what method are you using to flash it (SD card or pc)? Also when you bootup the phone does it say 3.27 radio still? I believe all the newer DCD roms need a carrier cab have you installed the cab? I'm pretty sure the phone won't be able to make calls without the cab installed. 1 more Q what service do you have?
Click to expand...
Click to collapse
When I flash the radio it goes to 8% flashes a red light and then resets. I have also tried both methods of flashing but none works. When I bootup the phone it does still say 3.27 as the radio. I have also tried to install a carrier cab but have had no luck.
Try updating to Hard SPL 2.47
The 3.27 Radio is NOT compatible with ANY DCD version 3.X and higher..... Have you read the Wiki? Can you flash the radio using the SD card method? All of your questions have answers in the Wiki.....
You should flash back to 2.3.2. Go into the bootloader(tri-color screen) and then flash 2.3.2 to the phone..... reboot it.... it should load up ok.... If this works for you to this point, you have several options to upgrade the radio ..... Read the Wiki....
azclown said:
The 3.27 Radio is NOT compatible with ANY DCD version 3.X and higher..... Have you read the Wiki? Can you flash the radio using the SD card method? All of your questions have answers in the Wiki.....
You should flash back to 2.3.2. Go into the bootloader(tri-color screen) and then flash 2.3.2 to the phone..... reboot it.... it should load up ok.... If this works for you to this point, you have several options to upgrade the radio ..... Read the Wiki....
Click to expand...
Click to collapse
I looked over the wiki again and was able to re-flash to 2.3.2. Thanks for your help guys.
Dear Gentlemen,
I mad a big Mistake, I flashed my room with the Radio NBH file, My room v. 1.25 , IPL-V1.00
ATHE100, SPL-V1.07.0000. I download the new Radio 1.57 NBH file and use the ROMUpdateUtility.exe wich I got it from the Temp files came from upgrading the room to 6.5. coz I did not know how to upgrade the radio.
The proccess began and after few seconds the device stope responding except that I can but it in bootloader status. I think the Room is dameged and I need a way to recover the system again and upgrade it to the leatest ver.
Please if someone can Help.
Thanks.
I did try flashing the room
I did try flashing the room with "Athena_SPL1.2_WM6.1_R0-CleanEdition_MiChY" but I got this message ERROR [270] : update error.
another error
This is another error, Please see the attaches image. whem i'm trying to flash it with another room.
ahmadkaram said:
Dear Gentlemen,
I mad a big Mistake, I flashed my room with the Radio NBH file, My room v. 1.25 , IPL-V1.00
ATHE100, SPL-V1.07.0000. I download the new Radio 1.57 NBH file and use the ROMUpdateUtility.exe wich I got it from the Temp files came from upgrading the room to 6.5. coz I did not know how to upgrade the radio.
The proccess began and after few seconds the device stope responding except that I can but it in bootloader status. I think the Room is dameged and I need a way to recover the system again and upgrade it to the leatest ver.
Please if someone can Help.
Thanks.
Click to expand...
Click to collapse
Sorry to hear this.
You should have read a bit more first as you would have realised that you can't flash a radio without unlocking.
Using the unlocker would have changed the SPL to 1.2 and allowed you to flash the radio.
Have you tried doing a hard reset first?
You can only flash the original branded ROM for your machine now if you can find it.
Have a look in the wiki for original shipped roms.
I have a feeling the SPL1.07 was a dutch or german ROM that is very hard to find.
Good luck
Regards Lakeman
Well as tittle says, i have famous at&t tiatan with 2.05 spl and error F400, was showing USB and SERIAL, now since i tried usb stick and sd card with reader on HTC HD7 confirmed to work, i start proces with titan and i get kicked to BL screen, now what is unexpected is that i, for fun only, flashed this IMG_Eternity_Cingular_US_1.10.502.04_Radio_16.23.02.26_A_16.27.00.23_Signed_ETERNITY_RELEASE.nbh via ROMupdateutillitytool and it flashed But what is main thing is spl didnt changed, nor radio, just FW it is now at&t US rom, I had EU .401 region ROM before, my humble question is should is use hammer on my titan or what? Is there a way to go back to .401 region ROM
thx in advance
EDIT: Well this is even more strange, via goldcard i now flashed same Cingular ROM, but why when i try to flash any other ROM via gold card i get knocked out of USB host mode into bootloader mode?
nikola92 said:
Well as tittle says, i have famous at&t tiatan with 2.05 spl and error F400, was showing USB and SERIAL, now since i tried usb stick and sd card with reader on HTC HD7 confirmed to work, i start proces with titan and i get kicked to BL screen, now what is unexpected is that i, for fun only, flashed this IMG_Eternity_Cingular_US_1.10.502.04_Radio_16.23.02.26_A_16.27.00.23_Signed_ETERNITY_RELEASE.nbh via ROMupdateutillitytool and it flashed But what is main thing is spl didnt changed, nor radio, just FW it is now at&t US rom, I had EU .401 region ROM before, my humble question is should is use hammer on my titan or what? Is there a way to go back to .401 region ROM
thx in advance
EDIT: Well this is even more strange, via goldcard i now flashed same Cingular ROM, but why when i try to flash any other ROM via gold card i get knocked out of USB host mode into bootloader mode?
Click to expand...
Click to collapse
Why did you flash to the Cingular Rom? From what I understand...you can get rid of the f400 error if you flash via goldcard the stock rom that you had before. Did you try this yet? and did you try flashing to your EU stock rom via the RUU too?
I read over on the DFT thread and noticed you were trying to install DFT's HSPL a couple of days ago. Do you know what SPL version you had before you tried to HSPL?
xconomicron said:
Why did you flash to the Cingular Rom? From what I understand...you can get rid of the f400 error if you flash via goldcard the stock rom that you had before. Did you try this yet? and did you try flashing to your EU stock rom via the RUU too?
I read over on the DFT thread and noticed you were trying to install DFT's HSPL a couple of days ago. Do you know what SPL version you had before you tried to HSPL?
Click to expand...
Click to collapse
Why i tried well because not a single one other Stock ROM was flashable via RUU or Goldcard, even stock Cingular ROM wasnt flashable via RUU i only mmanaged to flash it via goldcard. Well I was trying too to get rid of F400 but the thing is my titan is AT&T he was branded, before i bought it someone placed 2.05 spl on it and unlocked it, to meake it simple i got my titan with 2.05 spl, F400 and was x310e in about, every my atempt to flash something via goldcard was failure because it connects with usb stick in USB host mode , it says "Loading..." and then kicks me out to BL screen, exept the 1.10 cingular ROM, hehe but what is funny i get rid of F400 that way but my SPL stayed on 2.05..... :silly: iwill try the famous Tango ROM 4.16 spl i dont care anymore i am pissed or i will do that or use a hammer on this american junk... I had a lot of phones and not a single one was anoying as this one.....