Screen isn't lighting up - HTC EVO 3D

I have a slight issue. My wife's evo 3d screen is no longer coming on. Her phone is HTC Dev Unlocked. Battery is charged, and it doesn't matter if I try to get into bootloader, recovery, or just try to power the phone on. The capacitive buttons light up like they should, but the screen on the phone does not come on. I'm guessing that the light fr the screen went out.
So, here's the problem. Can I return he phone under warranty with it being unlocked? I know unlocking would normally void the warranty, but because the screen does not work, would they be able to tell that it is unlocked?
Other than that, I think my only option is to "drop" it in the toilet and use the insurance. Any thoughts or ideas are appreciated.
Jesus, it's hard to believe that there have been 80+ views and not a single suggestion

Related

HD2 No Screen

Qeustion
My HD screen is off, and i cant seem to get it on again.
I just was working on it 1hour ago, took it out of my pocket and see that i have no screen.
Rebooted the phone, but no succes .. i see the screen turning on, but it light-gray (backlight) but no actual info/colors etc, also tryd a soft reset, no succes.
I have the Energy ROM Com5 build from 8July with the new 2.12 radio rom.
Could it be that in some way the screen died?
Hope someone can help me, im @ work now so i cant connect it with the PC.
When im home im planning to reflash the device ..
Thanks!
Weird
I just pressed a button and the screen turned on, and the colours/info just slowely fade away ... weird.
Could it be that the touchscreen is not oke anymore?
Or could it be a problem in the radio/rom i use? (and therefore a reflash could fix this?)
Hope its a easy sollution, otherwise ill be flashing it to stock and get it fixed by HTC.
Very very strange.
It seems to work again.
Anyone think i should reflash it to stock and try get a new one?
Are these signs of a screen going defect?
I dont know, first phone for me with touchscreen.
I would suspect a faulty screen, if it is still within warranty i would deffinately get a new one, however yes, try going back to stock first, see if it helps, it may be just a bad flash.
screen problem
I've had this and similar problems with my HD2, now on the 5th replacement from HTC in just 6 months of owning the phone. I also had the same problem on my HTC HD previously. Press the power key and just the buttons at the bottom light up but no response from the screen. Also had exactly the same problem your experiencing where you can faintly see the screen but not lit up. Flash it to stock rom and return to HTC for repair.
BEWARE!!! take some pics with date stamps of your handset before returning. They sent me 3 handsets all with the glass front panel not fitted correctly. Check the return handset carefully, you should be able to feel a lip between the casing and the screen as the screen is set a fraction lower than the casing. THis should be uniform all around. They tried telling me that i had damaged it myself despite calling them as soon as the handset had been delivered back to me.
micky9869 said:
Press the power key and just the buttons at the bottom light up but no response from the screen.
Click to expand...
Click to collapse
That's 'sleep of death', which affects loads of htc devices.
Oke i will stock it soon and return for repair.
I think its idd a screen problem, cause when the screen isnt functioning anymore, and when i put my ear on the glass, i hear a little squishing sound, like air is escaping .. it doesnt do that when the screen shows info/colour.

[Q] Freezing HD2 after lock

I know there are hundreds of threads and articles posted about HD2s freezing with the lock screen but this issue seems different to me. My problem is that whenever I lock the phone the touch screen will freeze entirely. I thought a work around may be to install a different lock screen. After installing that I can get past the lock screen but the touch screen still is not responsive. I have no idea what to do. I already did a hard reset and it still does it. I would like to add that it is completely consistent. It happens every time without fail. In order to even use the phone I have to pull the battery and I get one use out of it before it locks and I have to pull the battery again. Does anyone have any suggestions? I would really appreciate it..
Update: I flashed the original ROM to my phone and the freezing problem still exists.. I have no idea what to do at this point.
Update 2: Narrowed down the problem to being the physical "power/end/lock" button. If I slightly press it but not fully it will go to the honeycomb style menu with all the apps. If I press it fully the screen will go out like normal but then if I restore it, the entire screen is locked up. Nothing will work after that until I pull the battery.
I've directly linked the issue with the power button. I dont know why all of a sudden the power button would have a different function. The work around I found is while the phone is locked and the screen is off I can press the green button to unlock the phone and the touch screen will then function. If I use the power button it will remain frozen. Any ideas what happened?
Hello,
I got some bad news for you, this issue is actually related to the digitizer (hardware) not software. What i would recommend is called HTC for a repair and send it in, it is covered by warranty, hopefully you have warranty.
A lot of people are having this issue, no-one yet has been able to pinpoint the cause, but here is the link a thread with similar problem:
http://forum.xda-developers.com/showthread.php?t=854165
Luckych
Thanks for the reply. I do not think I have a warranty on this phone considering I bought it privately. Ill talk to Tmo and HTC and see what I can do. Just a theory, I may be wrong. But I live in PA and its been getting below 20 here lately. I noticed today that my work around didnt work when I was outside working on my car. Then I went inside and used a blow dryer to heat up the phone and it started working again. The end button didn't function properly but I could unlock the phone with the green send button. Perhaps the cold weather is shorting out people's digitizers? I don't really know how they work so that's why i said its only a theory. I bought this phone in the spring and didnt have an issue until now when it started getting really cold.

[Q] Black screen

Hello, please help!
I have my phone without power when I watch an online channel, and after that I put it on charge. After a couple of hours, I have openit and I have a "pixel multicolor screen".
The phone can connect with pc but don;t move foward, and I relock it and after that I do a RUU_signed.exe update, where I get "error[131]:costumer id error
Now the screen is black/blank. I can feel the startup vibration but the screen is not turning on.
It;s there something to try before trow it? Thanks in advance for any ideea!
Comments Withdrawn
zcink said:
I hate to say this and I hope I am wrong, but sounds like from the way you describe it that your screen has overheated and actually burned out.
Can you get anything to light up? HTC splash screen? No?
Is it under warranty?
Click to expand...
Click to collapse
nothing on the screen. do you think it's the screen or the mainboard? because I can see the buttons light and backlight and vibration when I power it up, but the screen is black allways. If I change the screen can I make it work?
no warranty, because it's bought from france and I am not living there.
Thank you so much for your help!
Comments Withdrawn
robertaccess said:
nothing on the screen. do you think it's the screen or the mainboard? because I can see the buttons light and backlight and vibration when I power it up, but the screen is black allways. If I change the screen can I make it work?
no warranty, because it's bought from france and I am not living there.
Thank you so much for your help!
Click to expand...
Click to collapse
If you have any experience with taking phones apart, try to reconnect the display connector.
It could be something as simple as that.
However, if that doesn't work, it probably is the screen.
As Zcink said, it may not be worth repairing since it's going to add up to the price of a new phone.

From sleep to lockscreen LCD blank problem,any solution?

Hello.
When I leave my phone in sleep mode (screen locked and light off) and try to wake with On/Off button, sometimes I get a black screen with a faintly image. The touchscreen works and all the buttons, and if you click 2 times On/Off button - the image appears all ok. I tried to flash another stock ROM - all the same. Then I`ve unlocked the bootloader, rooted the phone and even did the S-off with wire trick (1.53 Hboot). Then I`ve tried 3-4 custom ROMs with 6-7 different kernels, from stock to custom, but all the same. Yes, I`ve updated the firmware file, also, but with no difference.
Well, I see that this problem is not so usual, but I couldn`t find any real solution. Did anyone have this kind of problem and solved it? Since I got this phone from another country - official warranty is out of the question, I need a DIY solution.
Any help is greatly appreciated.
THX in advance!!!
I would have to say it looks like the light for your screen is dying, I had my screen replaced once, my screen would flicker from very dark to very bright
Sent from my HTC EVO 3D X515m using xda premium
flashallthetime said:
I would have to say it looks like the light for your screen is dying, I had my screen replaced once, my screen would flicker from very dark to very bright
Sent from my HTC EVO 3D X515m using xda premium
Click to expand...
Click to collapse
hmmmm, but when I get the OK image - it doesn`t flicker or go from dark to bright, it only has trouble to "wake up from sleep mode". even when i relock the screen quickly and don`t leave it unused for 2-3 minutes, the screen works OK every time....it looks like a software problem, but still I didn`t manage to fix it with all the ROMs/kernels/firmwares I`ve flashed....
E-ducation said:
Hello.
When I leave my phone in sleep mode (screen locked and light off) and try to wake with On/Off button, sometimes I get a black screen with a faintly image. The touchscreen works and all the buttons, and if you click 2 times On/Off button - the image appears all ok. I tried to flash another stock ROM - all the same. Then I`ve unlocked the bootloader, rooted the phone and even did the S-off with wire trick (1.53 Hboot). Then I`ve tried 3-4 custom ROMs with 6-7 different kernels, from stock to custom, but all the same. Yes, I`ve updated the firmware file, also, but with no difference.
Well, I see that this problem is not so usual, but I couldn`t find any real solution. Did anyone have this kind of problem and solved it? Since I got this phone from another country - official warranty is out of the question, I need a DIY solution.
Any help is greatly appreciated.
THX in advance!!!
Click to expand...
Click to collapse
Thinking about how to troubleshoot if hardware or software. When in sleep mode, instead of using the power button, I would have the phone plugged into a computer and use the " adb reboot " command to reboot the phone without touching the phone a few times and see if it lights up correctly. The first thing you should see is the boot screen, and if it works every time, then you do have an issue with your firmware. If you don't see that boot screen first every time, then as much as it sucks, I would guess there is a hardware issue.
Good luck, but this is the easiest way I know of to help determine what the issue likely is.
Minor update here, the first thing (at least on mine) that I see is the lock screen for just a quick second or two, then it quickly goes into the boot sequence. This is important as in "sleep" the ROM is running, so if the first thing you see is the boot sequence every time, and not the lock screen, then it points more to a software problem than a hardware issue. CM9 had an issue for the epic4g where you had to turn it off and on sometimes to get the keyboard to light. They found the issue in the firmware causing it.
Just wanted to make this as accurate as possible.
Wow so I am not the only person with this problem. The EVO 3D that I have was replacement phone that was given to me from Sprint from the first EVO 3D that I had which had issues with the digitizer. I received the replacement phone this past Tuesday and it worked fine for two days. It was not rooted and I did install the ICS update. On Friday morning I took it off the charger and went to work, while in the break room the screen suddenly went black and I could not get the phone to display anything after that. The Android function buttons at the bottom will light up but the screen wont, the phone also gets hot even with it powered off.
Long story short, I took it back to the Sprint store where they ordered me yet another replacement EVO 3D. Has anyone had to go through 3 EVO 3Ds or more?
sonza said:
Thinking about how to troubleshoot if hardware or software. When in sleep mode, instead of using the power button, I would have the phone plugged into a computer and use the " adb reboot " command to reboot the phone without touching the phone a few times and see if it lights up correctly. The first thing you should see is the boot screen, and if it works every time, then you do have an issue with your firmware. If you don't see that boot screen first every time, then as much as it sucks, I would guess there is a hardware issue.
Good luck, but this is the easiest way I know of to help determine what the issue likely is.
Minor update here, the first thing (at least on mine) that I see is the lock screen for just a quick second or two, then it quickly goes into the boot sequence. This is important as in "sleep" the ROM is running, so if the first thing you see is the boot sequence every time, and not the lock screen, then it points more to a software problem than a hardware issue. CM9 had an issue for the epic4g where you had to turn it off and on sometimes to get the keyboard to light. They found the issue in the firmware causing it.
Just wanted to make this as accurate as possible.
Click to expand...
Click to collapse
Excellent thinking, I didn't think in that direction. I'll try this tomorow, since I'm not at home. My personal oppinion that it's a software problem but if I did all the above - what did I miss? If I flashed the firmware, ROM and kernel, what else is left untouched that could affect the LCD? Could anyone suggest a good kernel? Or can I downgrade the firmware, since no one had such a problem with GB?
just to inform all - I tried all soft solutions, but all the samo. finaly - I replaced the LCD and everything is OK.
THX all for help

Flashing/flickering/artifacting screen?

(UPDATE: Here is a link to a short video of my issue: https://youtu.be/YqKW3tU4Fhw)
So I cant seem to find ANY info relating to this issue aside from results for the LG G4, but the solutions for said phone are all over the place. Some are bad screen, some are related to sim tray, some are related to water damage and battery etc. So basically, about a month after buying this phone (KIW-L24 US version), the screen started to artifact and flash in and out randomly. There is nothing that seems to trigger it. I have set the phone down on a table while on the homescreen and watched the lightshow. It is basically a mixture of the problems seen in these videos (Feat. LG G4).
https://youtu.be/gAUkXLR7eQI And https://youtu.be/QstOH66pfiU.
Symptoms:
Screen will randomly start to flicker and fade in and out. I will also get crazy artifacting lines. (Think de-gaussing an old CRT monitor or simillar to what is seen in the second video)
If i see the problems happening, locking the phone and unlocking again will sometimes fix it temporarily. Other times the problem continues after i turn the screen back on.
Sometimes the screen will refuse to come back on. The backlight turns on, and the digitizer responds, but the screen is still black. Making sure the screen really is off, I can come back to the phone a few minutes later and it will turn on. Other times ill have to hard reset the phone (hold power button 10 sec) and it usually brings the screen back to life.
Background:
I bought the phone "used - Like New" from amazon. It came with all the original accessories and even still had the film protector on the back of the phone. I may have noticed these problems after I received the phone, but they really only started to show about a month after purchase.
At first I though it could be software related as I was running CM13 and something could have been corrupted, so i did not just a factory restore, but a full reflash. This didn't solve the issue. Restarting my phone and the reflash did help, but the problem returned. The inability to turn the screen on persists through a reset and I have to wait till the phone boots again to get the screen back. Sometimes takes more than one reboot. This pretty much confirms a hardware issue right? If i put the phone on a black screen, i can see three small fuzzy "dots" in a triangle shape in the top left quadrant. Could the screen have been damaged by whoever owned it before returning it? They are not dead pixels per se, but seems more like areas where the backlight is showing through ever so slightly more. Not visible unless you are on a black screen in a dark room. Ill upload a video showing some of the issues. Any help is appreciated!
im afraid you need a new display brodar...
Seems to be hardware issue. You can visit the nearest service center to get it fixed for few bucks if you don't have warranty.
Yeah that's what i figured, i just needed conformation. I was able to get amazon to take the return even though I was out of the return period. So at least ill be able to get a refund. Ill just pay the extra for a new one this time haha.
One question : Do u have over heat problem with ur phone ?? If u feel ur phone is more than work from the back dont replace . U'll damage the new screen also . Some ppl erported over heat cpu issue with honor ! ;.
KobaltPanther said:
(UPDATE: Here is a link to a short video of my issue:
)
So I cant seem to find ANY info relating to this issue aside from results for the LG G4, but the solutions for said phone are all over the place. Some are bad screen, some are related to sim tray, some are related to water damage and battery etc. So basically, about a month after buying this phone (KIW-L24 US version), the screen started to artifact and flash in and out randomly. There is nothing that seems to trigger it. I have set the phone down on a table while on the homescreen and watched the lightshow. It is basically a mixture of the problems seen in these videos (Feat. LG G4).
And
.
Symptoms:
Screen will randomly start to flicker and fade in and out. I will also get crazy artifacting lines. (Think de-gaussing an old CRT monitor or simillar to what is seen in the second video)
If i see the problems happening, locking the phone and unlocking again will sometimes fix it temporarily. Other times the problem continues after i turn the screen back on.
Sometimes the screen will refuse to come back on. The backlight turns on, and the digitizer responds, but the screen is still black. Making sure the screen really is off, I can come back to the phone a few minutes later and it will turn on. Other times ill have to hard reset the phone (hold power button 10 sec) and it usually brings the screen back to life.
Background:
I bought the phone "used - Like New" from amazon. It came with all the original accessories and even still had the film protector on the back of the phone. I may have noticed these problems after I received the phone, but they really only started to show about a month after purchase.
At first I though it could be software related as I was running CM13 and something could have been corrupted, so i did not just a factory restore, but a full reflash. This didn't solve the issue. Restarting my phone and the reflash did help, but the problem returned. The inability to turn the screen on persists through a reset and I have to wait till the phone boots again to get the screen back. Sometimes takes more than one reboot. This pretty much confirms a hardware issue right? If i put the phone on a black screen, i can see three small fuzzy "dots" in a triangle shape in the top left quadrant. Could the screen have been damaged by whoever owned it before returning it? They are not dead pixels per se, but seems more like areas where the backlight is showing through ever so slightly more. Not visible unless you are on a black screen in a dark room. Ill upload a video showing some of the issues. Any help is appreciated!
Click to expand...
Click to collapse
Try moving to stock once , if it fixed stick to it for few days . 99% of possible cases for hardware issue .
So better request for a replacement from huawei . but don't mention them that u bought it used . tell them u bought it new

Categories

Resources