Related
Guys,
Did anyone had luck flashing CM9 RC1 on Xperia Ray?
I'm struggling to get this working.
kgthenerd said:
Guys,
Did anyone had luck flashing CM9 RC1 on Xperia Ray?
I'm struggling to get this working.
Click to expand...
Click to collapse
i've tryied some time before, it works, but if i remember well i need to flash the fxp128 kernel.
paolinhos said:
i've tryied some time before, it works, but if i remember well i need to flash the fxp128 kernel.
Click to expand...
Click to collapse
That's lame.
I remember that I could use CM7 ROMs in my old Xperia X8 with stock kernel. It was a stupid move trying to unlock the bootloader to change kernel, I just bricked my phone.
I have tried, but it has some problems (automatic light sensor doesn't work for me) and wifi drops signal sometimes. Stay @ fxp 9.0 :cyclops:
El Brillantinas said:
That's lame.
I remember that I could use CM7 ROMs in my old Xperia X8 with stock kernel. It was a stupid move trying to unlock the bootloader to change kernel, I just bricked my phone.
Click to expand...
Click to collapse
You can use cm7 with stock kernel?
Really?
paolinhos said:
You can use cm7 with stock kernel?
Really?
Click to expand...
Click to collapse
I was running XRay Kernel on stock rom
it was good but i need CM9. But for some reason it is not working
paolinhos said:
You can use cm7 with stock kernel?
Really?
Click to expand...
Click to collapse
Yes, I did when I had my Xperia X8 alive. Check their section, they have a lot of ROMs based in CM7 Android 2.3.7 that work in stock kernel.The only neccesary things are root and CMW.
As I said, my big error was trying to unlock the bootloader just to use a ROM that needed a custom kernel, I don't know why I did it when other ROMs always worked fine, like GingerDX... I bricked my X8 forever, that's why I bought my Ray and I won't mess with the bootloader again.
I guess is due the different kernel architectures, or it's because SONY allowed to unlock bootloaders on the Xperia 2011 line, but it's very disappointing that most of the ROMs for Xperia Ray need unlocked bootloaders and customized kernels. That's why Hybrid 3.2, Superleggera and MIUI for locked bootloaders are a bless for us. @JJ Doctor, @arcatarc and @OatnezrA are true heroes :good:
El Brillantinas said:
Yes, I did when I had my Xperia X8 alive. Check their section, they have a lot of ROMs based in CM7 Android 2.3.7 that work in stock kernel.The only neccesary things are root and CMW.
As I said, my big error was trying to unlock the bootloader just to use a ROM that needed a custom kernel, I don't know why I did it when other ROMs always worked fine, like GingerDX... I bricked my X8 forever, that's why I bought my Ray and I won't mess with the bootloader again.
I guess is due the different kernel architectures, or it's because SONY allowed to unlock bootloaders on the Xperia 2011 line, but it's very disappointing that most of the ROMs for Xperia Ray need unlocked bootloaders and customized kernels. That's why Hybrid 3.2, Superleggera and MIUI for locked bootloaders are a bless for us. @JJ Doctor, @arcatarc and @OatnezrA are true heroes :good:
Click to expand...
Click to collapse
Dont know mate, I got ray and neo v on my table ready to get out of sony stock and for some reason i just cant install it on them.
May be i will never by an another sony phone again :angel:
In last 12hrs i tried almost everything, flashed FXP129 CM9 no luck, tried to flash official cm9 rc1 same thing no damn luck.
this ray is booloader unlocked via s1tool, rooted and has cwm recovery but i still cant flash any rom on it. It's frustrating :silly:
dont use FXP129 kernel its a bad kernel . and when you flash rom did you flash the kernel ? because CM9 RC1 kernel is also a bad kernel . the best working kernel is FXP 128 and the FXP128 rom .
-Jesco- said:
dont use FXP129 kernel its a bad kernel . and when you flash rom did you flash the kernel ? because CM9 RC1 kernel is also a bad kernel . the best working kernel is FXP 128 and the FXP128 rom .
Click to expand...
Click to collapse
as i say...
-Jesco- said:
dont use FXP129 kernel its a bad kernel . and when you flash rom did you flash the kernel ? because CM9 RC1 kernel is also a bad kernel . the best working kernel is FXP 128 and the FXP128 rom .
Click to expand...
Click to collapse
Thanks for the info mate, Now i'm on JJHybrid ROM with sirkay's XRay kernel. Working good lets see what happens :victory:
kgthenerd said:
Dont know mate, I got ray and neo v on my table ready to get out of sony stock and for some reason i just cant install it on them.
May be i will never by an another sony phone again :angel:
In last 12hrs i tried almost everything, flashed FXP129 CM9 no luck, tried to flash official cm9 rc1 same thing no damn luck.
this ray is booloader unlocked via s1tool, rooted and has cwm recovery but i still cant flash any rom on it. It's frustrating :silly:
Click to expand...
Click to collapse
What if you try to re-lock your bootloader?
i dont know why my touch screen now dont work anymore.. im using custom rom and unlock bootloader..i've not encounter this so far.. help me to find this solution
delmarz said:
i dont know why my touch screen now dont work anymore.. im using custom rom and unlock bootloader..i've not encounter this so far.. help me to find this solution
Click to expand...
Click to collapse
Flash Stock ROM..
May be the problem is with the touch screen drivers..
Tell us exactly, WHICH custom ROM did you install. Which version and for which phone.
may b u flashed wrong rom try to reflash the rom of mini pro (mango)
Just Try This
delmarz said:
i dont know why my touch screen now dont work anymore.. im using custom rom and unlock bootloader..i've not encounter this so far.. help me to find this solution
Click to expand...
Click to collapse
First you flash latest stock rom (.62) via flash tool.
If it is not working then
first flash x kernel via flashboot mode in flash tool
install ROM (hybrom v10) via CWM.
After that install ROM (hybrom v12) via CWM without wiping any data, cache partition and dalvik cache.
hope it will help you to solve this touchscreen problem.
@jk347.. can u upload the hybrom v10 since hybrom now is closed
@someguy.. im using realics v4 for xperia mini pro (mango)
guys can you upload via flash the touch screen drivers? if possible?
Best of Luck
here is the link for downloading hybrom v10 for mini pro
https://dl.dropbox.com/u/61884099/hybrom_v10.zip
best of luck !!!
flash x kernel for hybrom
delmarz said:
@jk347.. can u upload the hybrom v10 since hybrom now is closed
@someguy.. im using realics v4 for xperia mini pro (mango)
guys can you upload via flash the touch screen drivers? if possible?
Click to expand...
Click to collapse
x kernel for mini pro
http://dl.dropbox.com/u/28961326/kernel/kernel_mango-v4.zip
thanks jk347.. btw you also encountered this matter before? should i try hybromv17 instead of v10? why is it v10 not the latest one which is v17 ?
EDIT: could you please upload stock rom .62? coz mine is .42 is it ok to flash even if not .62?
I encountered error when flashing .62 --> never got success. But nothing problem when flashing .42. :beer:
Sent from my SK17i using xda app-developers app
when I flashing hybrom v17 in .42 gets stuck in sony logo.. can u upload guys the stock rom of .62 ftf files?
Hybrom requires unlocked bootloader and custom kernel to run.
For stock firmware files, check my signature link.
@someguy.. yes i already unlocked bootloader .. and use xkernel for the hybromv17.. since I used .42 when i flash xkernel and install custom kernel gets stock at logo.. but when I used .62 it works..now i dont see any .62 ftf here for mini pro ..
delmarz said:
@someguy.. yes i already unlocked bootloader .. and use xkernel for the hybromv17.. since I used .42 when i flash xkernel and install custom kernel gets stock at logo.. but when I used .62 it works..now i dont see any .62 ftf here for mini pro ..
Click to expand...
Click to collapse
so you are searching for .62 firmware for mini pro ?
this thread http://forum.xda-developers.com/showpost.php?p=27376024&postcount=3 has all firmware you need
@pahazax.. is it ok to use .62 in sk17a? since my phone is sk17i?
hey guys please some help
i wanted to install a custom rom
now im stuck
i did this
rooted via flastool
cwm5 via flash tool
i have 2.1 at the moment
after that to install the rom i was advice to install the kernel v6
i did
after that i install the recovery v6 for gb
i did
booted in recovery and installed the rom
myfirstrom.zip
and now im stuck
what can i do to fix this
thanks
Wrong thread buddy
Sent from my X10i using xda premium
elmanortega said:
hey guys please some help
i wanted to install a custom rom
now im stuck
i did this
rooted via flastool
cwm5 via flash tool
i have 2.1 at the moment
after that to install the rom i was advice to install the kernel v6
i did
after that i install the recovery v6 for gb
i did
booted in recovery and installed the rom
myfirstrom.zip
and now im stuck
what can i do to fix this
thanks
Click to expand...
Click to collapse
This tread should be in Q&A not in DEV.
Anyway do U have bootloader unlocked?
That rom is a 2.3 rom and you need to have and unlocked bootloader. You need to have 2.3 on your device first which would you would find in my signature below. So skip through the tread and find 2.3 Download it and flash it and try the rom again.
Sent from my X10i
Dude u r in 2.1 now. It has a baseband of .49 or .54. GB needs a baseband of .71. So the only option is first u download a pre-rooted firmware image and flash it via flashtool. U will boot into GB. Then unlock bootloader using Laser's method and install custom kernel like DoomKernel.
Follow this method
[RECOVERY image] {v2} X10 GB 3.0.1.G.0.75 [Prerooted + Fixed xRecovery] to insatll the prerooted firmware using flashtool.
Unlock bootloader using this steps from
[HOW-TO]UNLOCK bootloader for X10
Then flash DoomKernel from this link
[KERNEL][X10] DooMKernel [UNLOCKED BOOTLOADERS]{Rel:v06}[Dt:10/Jan][FW3.0.1.G.0.75] and boot up into stock rom or the previous GB rom u r using.
For Stock based roms, DoomKernel is simply the best.
For CM7 based roms, use FXP 130 kernel provided here FXP 130 and
For CM9 based roms, use FXP 132 kernel for better performance which u can download in FXP CM9 Thread.
---------- Post added at 11:10 AM ---------- Previous post was at 11:08 AM ----------
kingstonxl said:
This tread should be in Q&A not in DEV.
Anyway do U have bootloader unlocked?
Click to expand...
Click to collapse
He hasnt even updated to GB.. Still in stock 2.1.
Don't scare the guy with laser's method for now he is starting out small like we at one time were(im still growing) , the latest version of flashtools could do it easy. Its all in my signature if you tries it.
Sent from my X10i
brenty108 said:
Don't scare the guy with laser's method for now he is starting out small like we at one time were(im still growing) , the latest version of flashtools could do it easy. Its all in my signature if you tries it.
Sent from my X10i
Click to expand...
Click to collapse
Sry i didn kw ur post.. Let him do the way he think is best
thanks guys
im downloading the 2.1 ans 2.3 roms
now how do i install them?
i can access xrecovery
but when i connect to flashtool i dont have all the options
actually none
the devices is detected but thats it
can a stock rom be install using xrecovery?
elmanortega said:
thanks guys
im downloading the 2.1 ans 2.3 roms
now how do i install them?
i can access xrecovery
but when i connect to flashtool i dont have all the options
actually none
the devices is detected but thats it
can a stock rom be install using xrecovery?
Click to expand...
Click to collapse
dude flashing option works only when u r in download mode. i think u have 2.3.4. and stock kernel. if u want custom roms u have to unlock bootloader shown u n the post i provided
a2441918 said:
dude flashing option works only when u r in download mode. i think u have 2.3.4. and stock kernel. if u want custom roms u have to unlock bootloader shown u n the post i provided
Click to expand...
Click to collapse
thanks
Originally Posted by Androxyde
X10i Generic
Generic version 2.3.3 build 3.0.1.G.0.75 (MD5: 36F52BAA3556CDD7E56383614C01E5D6)
this one is no longer available
Thread Moved​
You should Know better, your post count indicates you have been active, so should be fully aware of the rules​
after i connect in flash mode
it stays for a few secs and reboots into the sse screen
is there a way to install the oem rom
in xrecovery?
or a 2.1 rom in recovery?
if i install a 2.1 custom rom
will that help??
im connected to flashtool in flash mode but nothing no options
what do i do now?
ok i finally go it to
where it was suppose to be to install formware
and this is where i am
Did you click fastboot? Click flashmode as x10 doesn't fastboot lol
Sent from my Xperia X10 using xda premium
thanks im good now
im about to install the ics rom
from
{rom}{6mp WORKING }XPERIA S ICS - CM9{14/8/12} {rom}
but i dont know wich kernel to install
i will write here what i did
so other can have an easy install
thanks to brenty108 for the help
If that rom is in ftf format
Open with 7zip or winrar
Look for kernel.sin
And place it in a folder
In flashtool create kernel
Point it to the folder containing kernel.sin
You should then be able to place your created kernel into firmware folder and flash it
I haven't had much experience with those roms so it's just a suggestion
Sent from my Xperia X10 using xda premium
elmanortega said:
thanks im good now
im about to install the ics rom
from
{rom}{6mp WORKING }XPERIA S ICS - CM9{14/8/12} {rom}
but i dont know wich kernel to install
i will write here what i did
so other can have an easy install
thanks to brenty108 for the help
Click to expand...
Click to collapse
You need to install a kernel called fxp132 from team fxp for ICS ROM to work... see my other posts in Q&A.. I have uploaded it somewhere.. you should be able to access through my profile->-> posts.
Sent from my Transformer TF101 using xda app-developers app
elmanortega said:
thanks im good now
im about to install the ics rom
from
{rom}{6mp WORKING }XPERIA S ICS - CM9{14/8/12} {rom}
but i dont know wich kernel to install
i will write here what i did
so other can have an easy install
thanks to brenty108 for the help
Click to expand...
Click to collapse
hey friend, you have downloaded the xperia s ics by vassishta but you dont know what kernel to be used?, dont be so lazy reading all the stuff in that thread (i mean xperia s ics), fxp 132 kernel is included there and instructions on how to flash the rom, hope i helped you, please press thanks button for me, pressing it is just an easy thing.. cheers.. :good:
Hey friends i own a ray and its unlocked... my friend need his lww to be rooted, i tried many method but the phone never starts.
And yes i followed all the methods correctly but i am not getting a clean ftf file just consiting of lww 4.1.A.0.562 only stock kernel...
My friend is afraid to unlock so trying safe way to enjoy new features on lww
If any1 can help me
spypsy said:
Hey friends i own a ray and its unlocked... my friend need his lww to be rooted, i tried many method but the phone never starts.
And yes i followed all the methods correctly but i am not getting a clean ftf file just consiting of lww 4.1.A.0.562 only stock kernel...
My friend is afraid to unlock so trying safe way to enjoy new features on lww
If any1 can help me
Click to expand...
Click to collapse
follow the guide from sony, it looks to me like it comes with a prerooted kernel (if it works for you can you let me know if that's the case, thanks).
http://talk.sonymobile.com/thread/41119?start=0&tstart=0
The fact is presently i have updated to Official ICS for LWW i,e .587 but for rooting it requires kernel 4.1.A.0.562 ... the kernel provided for LWW in that sony forum is ST18i_41A0562 , which means it ray's kernel.
Although i have tried it , but phone doesnt boot there after. Its just vibrates and nothing else hapens ( may be this s wt soft brick )
So i need a kernel for wt19i specificaly so that i cn root my friends phone.. he dnt like the official lag
spypsy said:
The fact is presently i have updated to Official ICS for LWW i,e .587 but for rooting it requires kernel 4.1.A.0.562 ... the kernel provided for LWW in that sony forum is ST18i_41A0562 , which means it ray's kernel.
Although i have tried it , but phone doesnt boot there after. Its just vibrates and nothing else hapens ( may be this s wt soft brick )
So i need a kernel for wt19i specificaly so that i cn root my friends phone.. he dnt like the official lag
Click to expand...
Click to collapse
Just flash stock kernel after you root 562 kernell
Sent from my SK17i using xda app-developers app
thats wt boy , i need 562 kernel .... i dnt have it, search a lot still didnt get so asking here.
Just flash stock kernel after you root 562 kernell
Click to expand...
Click to collapse
spypsy said:
The fact is presently i have updated to Official ICS for LWW i,e .587 but for rooting it requires kernel 4.1.A.0.562 ... the kernel provided for LWW in that sony forum is ST18i_41A0562 , which means it ray's kernel.
Although i have tried it , but phone doesnt boot there after. Its just vibrates and nothing else hapens ( may be this s wt soft brick )
So i need a kernel for wt19i specificaly so that i cn root my friends phone.. he dnt like the official lag
Click to expand...
Click to collapse
Hit the link on that sony page for the LWW kernel, it will take you to a page for st18i and on the right hand side of the page are the other kernels, I am not sure if they are the ones you are looking for, but there are a couple of lww kernels there.
hey guys i am repeating i have tried the st18i kernel from the sony link, also lt18i as well. but the phone dnt boot after kernel flash... so i am in search of wt19i official 562 kernel ...
I have tried more than 4-5 times . but the kernels from above link dnt work at all.
spypsy said:
hey guys i am repeating i have tried the st18i kernel from the sony link, also lt18i as well. but the phone dnt boot after kernel flash... so i am in search of wt19i official 562 kernel ...
I have tried more than 4-5 times . but the kernels from above link dnt work at all.
Click to expand...
Click to collapse
This one may be prerooted, I am not sure though: http://www.4shared.com/file/bWVyFhcE/WT19_41B0587_Kernel.html
Just flash a working ftf for your device, which will install the stock kernel too.
When you flash ray kernel the phone is not working near it's room is not for LwW. But rooting method is working just fine. So flash main 587 ftf then flash 562 kernel from ray, then turn the phone. As on the thread ad Sony says "your phone might not boot properly". Then proceed worth root on PC. When you finish rooting, pull out battery and then insert it and flash 587 kernel for LwW. Then your phone should boot normally as rooted
If you find this difficult, search Der 431 root, it's the same for 587 too
Sent from Sony Xperia Live with Walkman
@kir3 does the root method work even when the phone doesn't boot ? I cnt even reach the SONY logo, the screen is purely black .. just a vibration den nothing else...???
@justmpm the above kernel is not pre-rooted...
Ok got it friends ,,, thanks ... the devices dnt boot up on ray kernel but still can root it... now flashed LWW587 kernel and its rooted...
Hi
I have a Xperia neoL Phone.
after installing any custom kernels with proper custom rom my touch screen stops working
and it doesnt work at all but physical buttons are working fine.
I have tried every appropriate rom for Neol with its Proper kernel In this forum and xperia Play forum, but no one had touch screen working for me.
Please help me.
I really want to install custom Roms
Does your touchscreen work when you flash a stock ftf?
Sent from my MT25i using xda app-developers app
reflash the stock .ftf installed on your device when touch was working fine and see if your touch works
if not
reflash all the available stock .ftf s to make sure if its a hardware isssue or software
no need to say if these didnt work its probably a hardware issue and get your phone to sony servive center
hossein7292 said:
reflash the stock .ftf installed on your device when touch was working fine and see if your touch works
if not
reflash all the available stock .ftf s to make sure if its a hardware isssue or software
no need to say if these didnt work its probably a hardware issue and get your phone to sony servive center
Click to expand...
Click to collapse
Thanks for your reply
I dont have any problem in stock .631 .587 or other stock roms
My only problem is with custom kernels . when installing custom kernel touch will not work
4n00p said:
Does your touchscreen work when you flash a stock ftf?
Sent from my MT25i using xda app-developers app
Click to expand...
Click to collapse
yes my touch has no problem with any stock rom.
karo222 said:
yes my touch has no problem with any stock rom.
Click to expand...
Click to collapse
Then i think its because the kernel didint flash properly how did u flash the kernel?
4n00p said:
Then i think its because the kernel didint flash properly how did u flash the kernel?
Click to expand...
Click to collapse
I tried all ways
using Quickimg flashtools and using cmd but all was the same
firs time when i get the phone and it was on official rom .631 I rooted it installed Nxt kernel using quickimg and installed Honami rom and it worked fine
But after some days I want to install jb roms and as I remember I installed Lupus jb kernel and after that my touch stopeed working I have tried al other kernels available for neo L but no one has touch working.
Even in Nxt kernel with honami rom that i used first time with no problem , it has no touch
the only way I have touch is with official roms....
karo222 said:
I tried all ways
using Quickimg flashtools and using cmd but all was the same
firs time when i get the phone and it was on official rom .631 I rooted it installed Nxt kernel using quickimg and installed Honami rom and it worked fine
But after some days I want to install jb roms and as I remember I installed Lupus jb kernel and after that my touch stopeed working I have tried al other kernels available for neo L but no one has touch working.
Even in Nxt kernel with honami rom that i used first time with no problem , it has no touch
the only way I have touch is with official roms....
Click to expand...
Click to collapse
Have you used flashtool???
also does touch work when you use the TWRP in turbo kernel or is it only when you boot into the system?
4n00p said:
Have you used flashtool???
also does touch work when you use the TWRP in turbo kernel or is it only when you boot into the system?
Click to expand...
Click to collapse
Yes I used flashtools for flashing kernel and stock roms.
touch is not working in TWRP also and I have to use CWM recovery for flashing rom
karo222 said:
Yes I used flashtools for flashing kernel and stock roms.
touch is not working in TWRP also and I have to use CWM recovery for flashing rom
Click to expand...
Click to collapse
hey guys i have the same problem exactly does anyone have any solution for this i've searched a lot no one really knows what is the problem
Any Solutions.............?
Did anyone find any solution for this problem. Please help us....