Hello.
I have been a member since like 6 months. I purchased my Samsung Galaxy SII from Oman in the Middle East. I had rooted it a while back by flashing an insecure kernel. Now I can't seem to update to ICS, I tried flashing the original firmware back but still no luck with the update.
I would really like some help as to how to update to ICS now. And before you call me a noob I have researched how to do it every way possible so just wanted to get some feedback on the best way possible?
On all the ICS threads there is no ICS firmware for my PDA. So I just wanted to clarify if it's safe to flash a firmware with a different PDA?
If so which one is the best which will result in the least bugs (if those are avoidable that is )? Or should I skip this and just flash a JellyBean firmware? If so which one?
Im sorry for all the questions or if they seem very noobish but I have been searching all the threads and can't find a proper answer. If someone could help me it will be greatly appreciated .
My phone is a Samsung Galaxy SII ( I9100 )
PDA - I9100JPKJ2
PHONE - I9100XXKI4
CSC - I9100OJPKJ1
Thanks in advance.
And love the work you guys do here. Really awesome .
dkt8792 said:
Hello.
I have been a member since like 6 months. I purchased my Samsung Galaxy SII from Oman in the Middle East. I had rooted it a while back by flashing an insecure kernel. Now I can't seem to update to ICS, I tried flashing the original firmware back but still no luck with the update.
I would really like some help as to how to update to ICS now. And before you call me a noob I have researched how to do it every way possible so just wanted to get some feedback on the best way possible?
On all the ICS threads there is no ICS firmware for my PDA. So I just wanted to clarify if it's safe to flash a firmware with a different PDA?
If so which one is the best which will result in the least bugs (if those are avoidable that is )? Or should I skip this and just flash a JellyBean firmware? If so which one?
Im sorry for all the questions or if they seem very noobish but I have been searching all the threads and can't find a proper answer. If someone could help me it will be greatly appreciated .
My phone is a Samsung Galaxy SII ( I9100 )
PDA - I9100JPKJ2
PHONE - I9100XXKI4
CSC - I9100OJPKJ1
Thanks in advance.
And love the work you guys do here. Really awesome .
Click to expand...
Click to collapse
You can find here.
http://androidfirmwares.net/Home/sgs2
---------- Post added at 11:43 AM ---------- Previous post was at 11:36 AM ----------
dkt8792 said:
Hello.
I have been a member since like 6 months. I purchased my Samsung Galaxy SII from Oman in the Middle East. I had rooted it a while back by flashing an insecure kernel. Now I can't seem to update to ICS, I tried flashing the original firmware back but still no luck with the update.
I would really like some help as to how to update to ICS now. And before you call me a noob I have researched how to do it every way possible so just wanted to get some feedback on the best way possible?
On all the ICS threads there is no ICS firmware for my PDA. So I just wanted to clarify if it's safe to flash a firmware with a different PDA?
If so which one is the best which will result in the least bugs (if those are avoidable that is )? Or should I skip this and just flash a JellyBean firmware? If so which one?
Im sorry for all the questions or if they seem very noobish but I have been searching all the threads and can't find a proper answer. If someone could help me it will be greatly appreciated .
My phone is a Samsung Galaxy SII ( I9100 )
PDA - I9100JPKJ2
PHONE - I9100XXKI4
CSC - I9100OJPKJ1
Thanks in advance.
And love the work you guys do here. Really awesome .
Click to expand...
Click to collapse
U should better to skip and flash leaked jellybean via odin.
Just follow the instruction.
Before flashing remove samsung kies only from PC only samsung driver remained.
http://androidadvices.com/update-galaxy-s2-gt-i9100-official-jellybean-412-xxlsj-firmware/2/
ICS update
Hey I checked that link but there is no ICS firmware for my PDA ( JPKJ2 ).
So what I basically wanted to clarify is that if it's safe or me to flash a firmware with a different PDA. Like the one you showed in the second link? And the jellybean flashing works fine? The firmware is stable?
Thanks in advance.
dkt8792 said:
Hey I checked that link but there is no ICS firmware for my PDA ( JPKJ2 ).
So what I basically wanted to clarify is that if it's safe or me to flash a firmware with a different PDA. Like the one you showed in the second link? And the jellybean flashing works fine? The firmware is stable?
Thanks in advance.
Click to expand...
Click to collapse
Why don't you flash ICS 4.0.3 for United Arab Emirates?
Here's the link.
It'll not be advisable to flash the leaked JellyBean, as it isn't very stable. Sometimes the home Launcher force-closes in JB and the lockscreen hangs. So use ICS for now. And it doesn't matter which PDA version you have on your phone... those versions keep changing as new ROMs are out. But don't forget to backup your data before flashing!
Cheers!:good:
Thanks a lot! Worked flawlessly .
Now to root it which method would be the best and easiest to follow? Or will any of them be fine?
Thanks .
dkt8792 said:
Thanks a lot! Worked flawlessly .
Now to root it which method would be the best and easiest to follow? Or will any of them be fine?
Thanks .
Click to expand...
Click to collapse
Which rom you have flashed ICS/JB.
dkt8792 said:
Thanks a lot! Worked flawlessly .
Now to root it which method would be the best and easiest to follow? Or will any of them be fine?
Thanks .
Click to expand...
Click to collapse
1) Download View attachment CWM-SuperSU-v0.96.zip & View attachment recovery-clockwork-touch-5.8.1.5-galaxys2.zip.
2) Transfer them to your phone's external memory card.
3) Go into stock android recovery by holding "vol up + home + power" buttons. You will see android system recovery 3e.
4) Use volume down button and choose option -"apply update from external storage". After that choose recovery-clockwork-touch-5.8.1.5-galaxys2.zip . It will flash and automatically go into Clockworkmod recovery.
5) In CWM recovery, choose install zip (internal or external sdcard - try and see in which one you find it) and then flash CWM-SuperSU-v0.96.zip .
6) After that reboot your phone and you will have root!
PS: You can press the "Thanks" button below my posts if I helped you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dkt8792 said:
Thanks a lot! Worked flawlessly .
Now to root it which method would be the best and easiest to follow? Or will any of them be fine?
Thanks .
Click to expand...
Click to collapse
If you're on ICS, flash Siyah in .tar format directly through odin. Although there are more methods to root i find this every easy. Best of luck :good:
BTW, i am too from Oman, Muscat
kazi_rizwan said:
If you're on ICS, flash Siyah in .tar format directly through odin. Although there are more methods to root i find this every easy. Best of luck :good:
BTW, i am too from Oman, Muscat
Click to expand...
Click to collapse
I second that way, go to www.gokhanmoral.com and download either v5.0.1 or v4.1.5... the last one is said be better battery wise.
Sent from my GT-I9100 using xda premium
I had same question a week ago. However, i installed resurrection rom (ICS) via odin. The zip included pit file, kernel n rom. Just flash it n u will hav a clean ics. It is based on XXLPW n sice u wil flash it thru odin u dont hav to worry abt versions.
Sent from my GT-I9100 using xda premium
c4capricorn said:
I had same question a week ago. However, i installed resurrection rom (ICS) via odin. The zip included pit file, kernel n rom. Just flash it n u will hav a clean ics. It is based on XXLPW n sice u wil flash it thru odin u dont hav to worry abt versions.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Usually when there is a zip file its for flashing via recovery mode, not unpacking it and flashing with odin... stupidity is what bricks phones
Sent from my GT-I9100 using xda premium
Oh ok. Cool I'll try one of these. I'm assuming the differences between them all are minor ones right?
Also one last question .
If I wanted to get Jellybean on my phone, do I have to first flash the Jellybean firmware on it or can I just flash one of the custom ROM's online?
Or do the custom ROM's need stock JB to be flashed on the phone first?
Thanks for all the help guys.
dkt8792 said:
Oh ok. Cool I'll try one of these. I'm assuming the differences between them all are minor ones right?
Also one last question .
If I wanted to get Jellybean on my phone, do I have to first flash the Jellybean firmware on it or can I just flash one of the custom ROM's online?
Or do the custom ROM's need stock JB to be flashed on the phone first?
Thanks for all the help guys.
Click to expand...
Click to collapse
Download one of them & flash ... you don't need any base for these.:cyclops:
krayndr said:
Usually when there is a zip file its for flashing via recovery mode, not unpacking it and flashing with odin... stupidity is what bricks phones
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
First of all it was not a zip it was a .tar file with pit to be flashed thru odin
Sent from my GT-I9100 using xda premium
Related
guys i cant install any other rom after i installed this one
[Rom] AOKP 4.0.4 (Fixes!!!)(4-3-2012)
http://forum.xda-developers.com/showthread.php?t=1574718
same error "Installation aborted"
error on ODIN or on CWM?
maybe cos thats for the SGH-I777? only use roms for I9100
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
zaheedahmed said:
error on ODIN or on CWM?
Click to expand...
Click to collapse
it's on CWM
Wait ,do you have the international SGS2 (i9100) or the AT&T SGS2 (i777). If you have the i777, you will not be able to flash any i9100 roms.
Kaze105 said:
Wait ,do you have the international SGS2 (i9100) or the AT&T SGS2 (i777). If you have the i777, you will not be able to flash any i9100 roms.
Click to expand...
Click to collapse
international
The ROM you linked was for the AT&T SGS2 (i777) and you have the i19100. This rom will not work, i would suggest that you flash a ROM via Odin.
zun0008 said:
international
Click to expand...
Click to collapse
your image shows an AT&T SGS2, then rom you installed is correct...
you are lucky and and thanks to CWM for preventing the installation of inappropreate ROM...
Hunt for AT&T SGS2 (i777) version roms and check md5 Checksum from your mobile using AFV toot from market....
zaheedahmed said:
your image shows an AT&T SGS2, then rom you installed is correct...
Click to expand...
Click to collapse
You sure that isnt just touch CWM? i cant tell if there is a HW button or not.
Crucio_ said:
You sure that isnt just touch CWM? i cant tell if there is a HW button or not.
Click to expand...
Click to collapse
yes yes it could be......let him put a full picture of the phone
then he installed a AT&T SGS2 vesion rom....
Then fire the ODIN.......
Crucio_ said:
You sure that isnt just touch CWM? i cant tell if there is a HW button or not.
Click to expand...
Click to collapse
^^
Crucio may be right. Looks a lot like touch CWM to me (looks exactly the same as mine). However, if you look at the log of what happened on the screen, it's gone thru every SGS2 variant it has in its checklist & seemed to fail to find all/any of them, sooo...
That would tend to suggest the firmware attempting to be flashed isn't for/doesn't work with any of those phones in that list.
zaheedahmed said:
yes yes it could be......let him put a full picture of the phone
then he installed a AT&T SGS2 vesion rom....
Then fire the ODIN.......
Click to expand...
Click to collapse
its not At&t SGS2... before that rom i had installed lots of other roms and they worked fine but since i flashed [Rom] AOKP 4.0.4 (Fixes!!!)(4-3-2012) its not letting me flash any other rom.
here is the full img
its new Siyah-v3.0rc2-CWM
zun0008 said:
its not At&t SGS2... before that rom i had installed lots of other roms and they worked fine but since i flashed [Rom] AOKP 4.0.4 (Fixes!!!)(4-3-2012) its not letting me flash any other rom.
here is the full img
Click to expand...
Click to collapse
Seems like something may have broken since you flashed a i777 rom on your i9100 phone. Use odin and flash a rom (stock, cm, or other odin flashable roms)
just realised by mistake I flashed different rom and it changed my model number to SGH-i777
how to go back on i9100?
thanks
hmm, the rom you linked and installed is for AT&T which is a wrong selection...
if your CWM is not allowing you to install any other rom only option left is ODIN,
Flash an official ROM from ODIN...
Kaze105 said:
Seems like something may have broken since you flashed a i777 rom on your i9100 phone. Use odin and flash a rom (stock, cm, or other odin flashable roms)
Click to expand...
Click to collapse
can you suggest any specific one ?
thanks
zun0008 said:
can you suggest any specific one ?
thanks
Click to expand...
Click to collapse
For now, it would probably best to restart from stock, just in case.
Download this or other official ICS:
http://forum.xda-developers.com/showthread.php?t=1544487
Instructions are there, so just read that. Then go to chainfire kernels for root and CWM.
Chainfire kernel:
http://forum.xda-developers.com/showthread.php?t=1544487 After that, you should be fine in flashing any i9100 roms.
zun0008 said:
can you suggest any specific one ?
thanks
Click to expand...
Click to collapse
pick a latest ICS from this thread : http://forum.xda-developers.com/showthread.php?t=1544487
find more instruction for flashig from ODIN here :
http://forum.xda-developers.com/showpost.php?p=13712988&postcount=1
Kaze105 said:
For now, it would probably best to restart from stock, just in case.
Download this or other official ICS:
http://forum.xda-developers.com/showthread.php?t=1544487
Instructions are there, so just read that. Then go to chainfire kernels for root and CWM. LPQ kernel if you used the rom in the link above.
Chainfire kernel:
http://forum.xda-developers.com/showthread.php?t=1544487 After that, you should be fine in flashing any i9100 roms.
Click to expand...
Click to collapse
thanks.. will try now and let you know
zun0008 said:
thanks.. will try now and let you know
Click to expand...
Click to collapse
Woops, didnt check the latest version. If you used LP4, find a kernel for that, not LPQ as I said above. At the moment, there doesnt seem to be a LP4 kernel, so use LP3
I'm a HTC user and my friend saw 4.0 on mine so he wanted that also on his S2
After flashing CMW with odin and than selecting via internal SD the rom. It just doesnt flash it!
Now i want to revert everything back but that also is not working.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone just give me a realy easy guide to flash a damn 4.0 rom or original rom i dont care what it is just want to make this phone working again. Im strugling for almost 5 hours now
CrazyTurk42 said:
I'm a HTC user and my friend saw 4.0 on mine so he wanted that also on his S2
After flashing CMW with odin and than selecting via internal SD the rom. It just doesnt flash it!
Now i want to revert everything back but that also is not working.
Can anyone just give me a realy easy guide to flash a damn 4.0 rom or original rom i dont care what it is just want to make this phone working again. Im strugling for almost 5 hours now
Click to expand...
Click to collapse
Those images indicate that your device failed a model and product check before it allows the package to flash. Looks like it is checking for GT-I9100, GT-I9100T, or GT-I9100M. Check your model number under your battery. Is it for sure one of these models? Or something else?
model: GT-I9100
ssn: -I9100GSMH
I'm realy confused what the hell is wrong
you have the I9100G version as indicated by the ssn. I9100GSMH., to flash you need to go to the g subforum for firmware that will work with your phone.
You can not use international version firmware.
Cosmic Blue said:
you have the I9100G version as indicated by the ssn. I9100GSMH., to flash you need to go to the g subforum for firmware that will work with your phone.
You can not use international version firmware.
Click to expand...
Click to collapse
That's not true. SSN is not indicative of the model. MODEL is the model.
I have an I9100, (NOT a G) and my SSN is I9100GSMH. I think the G in the SSN is part of "GSM", indicating the cell tech maybe?
---------- Post added at 09:38 AM ---------- Previous post was at 09:36 AM ----------
CrazyTurk42 said:
model: GT-I9100
ssn: -I9100GSMH
I'm realy confused what the hell is wrong
Click to expand...
Click to collapse
Pull the /system/build.prop file, and see what that file has for ro.product.model, ro.product.name, ro.product.device, and ro.product.board.
ctomgee said:
Pull the /system/build.prop file, and see what that file has for ro.product.model, ro.product.name, ro.product.device, and ro.product.board.
Click to expand...
Click to collapse
how? i cant mount usb storage either
CrazyTurk42 said:
how? i cant mount usb storage either
Click to expand...
Click to collapse
Reboot to recovery, plug in usb to phone and computer, "adb pull /system/build.prop ." from a command prompt.
not working... doesnt requnizes the command
CrazyTurk42 said:
not working... doesnt requnizes the command
Click to expand...
Click to collapse
So it sounds like you don't have ADB. You probably need to download and install the Android SDK. (download that here)
Also sounds as if you should go over some of the basics: Galaxy SII Bible - http://forum.xda-developers.com/showthread.php?t=1473577
This may also help in the event all else fails: http://forum.xda-developers.com/showthread.php?t=1449771
ICS update via CWM a guess say its a wrong format file or it should be flashed via Odin .
But as nil details of the upgrade file are posted its a guess .
jje
Could you tell me what is your current ROM version?
how did you flash CWM is it Cf-root?
ctomgee said:
This may also help in the event all else fails: http://forum.xda-developers.com/showthread.php?t=1449771
Click to expand...
Click to collapse
finaly a usefull link but the download links are broken. f**k me
edit: nvm got the links working lets hope i can fix it now
CrazyTurk42 said:
finaly a usefull link but the download links are broken. f**k me
Click to expand...
Click to collapse
Which links? I didn't think there were any broken ones in that link.
CrazyTurk42 said:
finaly a usefull link but the download links are broken. f**k me
edit: nvm got the links working lets hope i can fix it now
Click to expand...
Click to collapse
why are you trying that phone not booting now?
zaheedahmed said:
why are you trying that phone not booting now?
Click to expand...
Click to collapse
because i can flash google apps in CWM but no roms. Then that error comes what i posted
It is obvious when you can flash a kernel, but you can't flash a ROM, because it can't properly read the NAND, but can flash a kernel. But you ask, why the kernel? Because flashing a kernel is a bit deeper than flashing a ROM. When you flash a kernel, you're changing/putting new instructions to the hardware, and when flashing a ROM, the instructions that are drewn are different and more "simple", so when flashing, ODIN will say "FAIL" instead of "PASS", or suddenly stopping the flash out of nowhere.
Click to expand...
Click to collapse
CrazyTurk42 said:
because i can flash google apps in CWM but no roms. Then that error comes what i posted
Click to expand...
Click to collapse
You have given only very few information,
You flashed a CWM on a Rooted phone? or CWM with a rooted kernel?
your posted version of CWM has got normally issues reported..
try to flash Siyah kernel from ODIN, then you try the ROM from CWM
zaheedahmed said:
You have given only very few information,
You flashed a CWM on a Rooted phone? or CWM with a rooted kernel?
your posted version of CWM has got normally issues reported..
try to flash Siyah kernel from ODIN, then you try the ROM from CWM
Click to expand...
Click to collapse
Yes it was a stock rooted rom. I flashed CMW with odin
try either CF-root or Siyah shoud work
Thnx to Faryaab it worked again! Im never ever going to flash a samsung again
Dear Mates
I need some help from the experts - I am very much new to it
My Device is SGS II - (and its rooted by some other)
- I did a factory reset & delete all the folders from memory.
bellow is the detais
android version :2.3.5
baseband :I100XXK13
kernel : 2.6.35.7-I1900ZKSK13-CL603802
[email protected]#2
Build :GINERBREAD.ZSK13
Just now I have tried to upgrade it to ICS Official relase via KIES. but it says
Your Device's current firmware version is not supported to update via Kies
Current firware version : PDA:K13 / PHONE :K13 /CSC:K13(XXX)
-Also here atatced my kies screen shot
Pls advice - how can I solve this issue..
I need it to be done shortly
Thnx for ur help..
Nneel said:
Dear Mates
I need some help from the experts - I am very much new to it
My Device is SGS II - (and its rooted by some other)
- I did a factory reset & delete all the folders from memory.
bellow is the detais
android version :2.3.5
baseband :I100XXK13
kernel : 2.6.35.7-I1900ZKSK13-CL603802
[email protected]#2
Build :GINERBREAD.ZSK13
Just now I have tried to upgrade it to ICS Official relase via KIES. but it says
Your Device's current firmware version is not supported to update via Kies
Current firware version : PDA:K13 / PHONE :K13 /CSC:K13(XXX)
-Also here atatced my kies screen shot
Pls advice - how can I solve this issue..
I need it to be done shortly
Thnx for ur help..
Click to expand...
Click to collapse
Go to www.sammobile.com download the ics firmware and flash through Odin
Sent from my Nexus 7 using xda premium
Hi.. thnx
but the page dose not exist
http://www.sammobile.com/2012/07/04/android-4-0-4-leaked-for-galaxy-sii/www.SamFirmware.com
any other advice pls
Nneel said:
Hi.. thnx
but the page dose not exist
http://www.sammobile.com/2012/07/04/android-4-0-4-leaked-for-galaxy-sii/www.SamFirmware.com
any other advice pls
Click to expand...
Click to collapse
http://www.sammobile.com/firmware/?page=3
Remember to flash custom kernel afterwards.
Nneel said:
Dear Mates
I need some help from the experts - I am very much new to it
My Device is SGS II - (and its rooted by some other)
- I did a factory reset & delete all the folders from memory.
bellow is the detais
android version :2.3.5
baseband :I100XXK13
kernel : 2.6.35.7-I1900ZKSK13-CL603802
[email protected]#2
Build :GINERBREAD.ZSK13
Just now I have tried to upgrade it to ICS Official relase via KIES. but it says
Your Device's current firmware version is not supported to update via Kies
Current firware version : PDA:K13 / PHONE :K13 /CSC:K13(XXX)
-Also here atatced my kies screen shot
Pls advice - how can I solve this issue..
I need it to be done shortly
Thnx for ur help..
Click to expand...
Click to collapse
If u want to update via KIES . U should just flash 2.3.5 stock firmware again via odin for ur country and then just use OTA update to apply update .. It should work via KIES also then ... I myselc had this problem .. I solved it by above method coz i like stock roms abd i dont like rooting ... And if u r rooted KIES wont update
Sent from my GT-I9100
Nneel said:
Dear Mates
I need some help from the experts - I am very much new to it
My Device is SGS II - (and its rooted by some other)
- I did a factory reset & delete all the folders from memory.
bellow is the detais
android version :2.3.5
baseband :I100XXK13
kernel : 2.6.35.7-I1900ZKSK13-CL603802
[email protected]#2
Build :GINERBREAD.ZSK13
Just now I have tried to upgrade it to ICS Official relase via KIES. but it says
Your Device's current firmware version is not supported to update via Kies
Current firware version : PDA:K13 / PHONE :K13 /CSC:K13(XXX)
-Also here atatced my kies screen shot
Pls advice - how can I solve this issue..
I need it to be done shortly
Thnx for ur help..
Click to expand...
Click to collapse
Download stock fw www.sammobile.com,flash it using Odin 3.07 or the later issue. Now you can update via kies,as kies dont update if you are rooted
Sent from my GT-I9100 using xda premium
Hi Inception..
here comes a problem- i could not locate which file - I need to download from bellow
http://www.sammobile.com/firmware/?page=3
well- my set is open not bundled with any carrier
my android version is below
Android version : 2.3.5
baseband :I9100XXK13
kernel : 2.6.35.7-I1900ZKSK13-CL603802
[email protected]#2
Build :GINERBREAD.ZSK13
PAD : i9100zsk13
PHONE : i9100xxk13
CSC : i9100zsk13
at that page all is for 2.3.6 ? what to do? I will use any of 2.3.6 ?
will that work ?????????????????????????
After I tried JB 4.1.2 leaked version I would like to restore my phone to make kies update available. I downloaded original 2.3.6 from sammobil uploaded to the phone via odin but after that unfortunately my kies says this device doesn't support update via kies ?
Ati007 said:
After I tried JB 4.1.2 leaked version I would like to restore my phone to make kies update available. I downloaded original 2.3.6 from sammobil uploaded to the phone via odin but after that unfortunately my kies says this device doesn't support update via kies ?
Click to expand...
Click to collapse
make sure mobile odin is not running on background.. and do check if you have correct driver installed
technicalmetal28 said:
make sure mobile odin is not running on background.. and do check if you have correct driver installed
Click to expand...
Click to collapse
Was having the same problem as the OP saw your reply and opened task manager and killed every task that had kies in it, re-flashed my phone with odin and happy days
Mr.KiLLeR said:
If u want to update via KIES . U should just flash 2.3.5 stock firmware again via odin for ur country and then just use OTA update to apply update .. It should work via KIES also then ... I myselc had this problem .. I solved it by above method coz i like stock roms abd i dont like rooting ... And if u r rooted KIES wont update
Sent from my GT-I9100
Click to expand...
Click to collapse
I am getting the same error on my phone but mine is not rooted. Just got the phone yesterday, I installed KIES on my computer and it is telling me my software version is not supported to update firmware I have the one from t-mobile.
enigmaco said:
I am getting the same error on my phone but mine is not rooted. Just got the phone yesterday, I installed KIES on my computer and it is telling me my software version is not supported to update firmware I have the one from t-mobile.
Click to expand...
Click to collapse
T-Mobile USA? If yes, you're in the wrong forum for your device.
Thanks yeah it's t-mobile
Sent from my SGH-T989 using xda app-developers app
enigmaco said:
Thanks yeah it's t-mobile
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Like I said, you're in the wrong forum. You want to be in http://forum.xda-developers.com/forumdisplay.php?f=1329
I was saying thank you for the help didn't need to get snippy
Sent from my SGH-T989 using xda app-developers app
enigmaco said:
I was saying thank you for the help didn't need to get snippy
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
That wasn't intended to be snippy, sorry if you took it that way. 8 times out of 10 I run into dense people who don't seem to read between the lines, so I was trying to be direct.
Understood just didn't know there was about a million variations of this phone i won't clutter up this board thank you again for your assistance.
Sent from my SGH-T989 using xda app-developers app
technicalmetal28 said:
make sure mobile odin is not running on background.. and do check if you have correct driver installed
Click to expand...
Click to collapse
Mobile odin? I think you meant Kies.
---------- Post added at 03:09 AM ---------- Previous post was at 03:01 AM ----------
ctomgee said:
That wasn't intended to be snippy, sorry if you took it that way. 8 times out of 10 I run into dense people who don't seem to read between the lines, so I was trying to be direct.
Click to expand...
Click to collapse
This is direct:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have the same problem
ScreenShot:
http://i.imgur.com/hv0BBnC.jpg
sammobile.com has ICS 4.0.3 for my country
should I flash directly with odin?
Yes you can.
You can also flash spain's JB via Odin.
Sent from the little guy
Hi , I bought a galaxy s2 few days ago with version 4.0.3 ICS and I used a tutorial to update it to official 4.1.2 jelly bean .After update i see my phone was rooted cuz without root i cant do update and now i see i dont have rooting anymore .Where is the rooting ? Why i dont have it anymore ? And how can i make rooting again without delete my apps ?
Deleted
Sorry
Be more prrcisely . What program i need to use ? What files ? Give me a tutorial link .
Oh man sorry, I didn't see that u are on official 4.1.2....
So u just have the firmware but not the rooted kernel, OK.
So here is one of a lot tutorial (one of the first when u Google it)
http://m.ibtimes.co.uk/root-xxlsj-android412-official-jellybean-galaxys2-i9100-405680.html
Much success
Sent from my GT-I9100 using xda premium
[/COLOR]
Hannibal226 said:
Oh man sorry, I didn't see that u are on official 4.1.2....
So u just have the firmware but not the rooted kernel, OK.
So here is one of a lot tutorial (one of the first when u Google it)
http://m.ibtimes.co.uk/root-xxlsj-android412-official-jellybean-galaxys2-i9100-405680.html
Much success
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Nah nah, that is one wrong guide. It is using Siyah Kernl 4.15. Please don't use it with XXLSJ.
For correct procedure follow http://forum.xda-developers.com/showthread.php?t=2066404
I used something called xxlsj when i update to official jelly bean .What is this "Syiah kerne"? And i see on your guide "drraptor" is a lot of posts and links . What shoud i choice from there ?
buhanita said:
I used something called xxlsj when i update to official jelly bean .What is this "Syiah kerne"? And i see on your guide "drraptor" is a lot of posts and links . What shoud i choice from there ?
Click to expand...
Click to collapse
do either of these
Download Philz Kernel for XXLSJ from here http://www.mediafire.com/?2d893461cjg2rbe. and follow these instructions
Boot into download mode. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key
start odin3 (download Link ) and configure it as in picture below
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://forum.xda-developers.com/showpost.php?p=31310884&postcount=3
Or
Use Siyah Kernel
Download Siyah Kernel from here http://d-h.st/hcS . and follow these instructions
Boot into download mode. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key
start odin3 (download Link ) and configure it as in picture below
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
Deleted
Sorry
Hannibal226 said:
@drraptor
???
For the root it doesn't matter and aftwards he can flash any newer release. Over this u are posting a beta which isn't good for a new one who are using stock and just need root.
Click to expand...
Click to collapse
how can you boot a XXLSJ jellybean rom with ICS kernel ? :silly: . I'm speaking on my personal experience, navin00's experience and what Philz said in his thread.
Philz's kernel isn't in beta.
Deleted
Sorry
1st you are not using OFFICIAL JELLY BEAN that doesn't exist cos Samsung are slow at updating you are using a leak provided by izap (http://forum.xda-developers.com/showthread.php?t=1994313)
2nd siyha will not work on this ROM below version 6.0 if you flash this the phone will not boot you need to use siyha 6.0 beta 4 however I wouldn't recommend keeping this as there are still bugs. Try Phils kernel 3.73(http://forum.xda-developers.com/showthread.php?t=1877270) or jeebo (http://forum.xda-developers.com/showthread.php?t=2062208)
3rd why use a completely stock ROM why not use others such as this (http://forum.xda-developers.com/showthread.php?t=1569686) which is stock with the crapware removed and lots of features from the s3 ripple lock multi window etc
Hannibal226 said:
It's a release under ICS but that not directly means it not working on JB.
If u read the changelog of 5.0.1 it also merged JB codes/things (I'm not a dev, but I used it on JB already)
And the 4.1.5 should work on JB, too, as I remind and I won't think the page would link to it if they hadn't test before.
CHEERS
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
It didn't worked for me, nor for this guy
http://forum.xda-developers.com/showthread.php?p=35898155
Ended up in bootloop. So if you have working options available in Philz kernel (XXLSJ) , and Siyah v6 is specifically for JB 4.1 why bother with something which will end up in a boot loop
Sent from my GT-I9100 using xda app-developers app
To stop the discussions here I will delete my posts except the first one which link to the guide.
@OP
So just use a newer kernel than the one which is named in the linked guide from my post before. (u find the Siyah kernel releases here: gokhanmoral.com)
Or just follow the guides from other users here...
Sorry and much success.
CHEERS
PS:
Even it worked for me I hope to stop now the discussion about work and not work...
Sent from my GT-I9100 using xda premium
now this is one messy thread.
Hannibal226 said:
To stop the discussions here I will delete my posts except the first one which link to the guide.
@OP
So just use a newer kernel than the one which is named in the linked guide from my post before. (u find the Siyah kernel releases here: gokhanmoral.com)
Or just follow the guides from other users here...
Sorry and much success.
CHEERS
PS:
Even it worked for me I hope to stop now the discussion about work and not work...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
On official Siyah Kernel site i see he write : use it only if you have a leaked jb rom or won't boot . I have an official jb rom . Should i try that ? Im a newbie in this domain i know to make iphones very good but on android it's lot different . So take me slow .
buhanita said:
On official Siyah Kernel site i see he write : use it only if you have a leaked jb rom or won't boot . I have an official jb rom . Should i try that ? Im a newbie in this domain i know to make iphones very good but on android it's lot different . So take me slow .
Click to expand...
Click to collapse
Yes it will work.
You can flash any one of these http://forum.xda-developers.com/showpost.php?p=34304956&postcount=3 Remember to use the ODIN Flashable Kernel version.
Or you can flash Philz lastest version download it from this post http://forum.xda-developers.com/showpost.php?p=36003268&postcount=3647
I tryed to root my glaxy s2 4.1.2 jb official update . I downloaded odin and PhilZ-cwm6-XXLSJ-OXX-3.81.tar i turn off my phone and boot in download mode , i connect phone to pc , i selected pda and selected PhilZ-cwm6-XXLSJ-OXX-3.81.tar file and press start . At finish in odin sayed succesful , but i don't have root on my phone . And now when i turn off my phone and i see logo with galaxy s2 i9100 i have a little yellow triangle ... What can i do ? Give me a tutorial step by step .
buhanita said:
I tryed to root my glaxy s2 4.1.2 jb official update . I downloaded odin and PhilZ-cwm6-XXLSJ-OXX-3.81.tar i turn off my phone and boot in download mode , i connect phone to pc , i selected pda and selected PhilZ-cwm6-XXLSJ-OXX-3.81.tar file and press start . At finish in odin sayed succesful , but i don't have root on my phone . And now when i turn off my phone and i see logo with galaxy s2 i9100 i have a little yellow triangle ... What can i do ? Give me a tutorial step by step .
Click to expand...
Click to collapse
imho it is rooted. Just download superuser app from playstore.
Sent from my GT-I9100 using Tapatalk 2
buhanita said:
I tryed to root my glaxy s2 4.1.2 jb official update . I downloaded odin and PhilZ-cwm6-XXLSJ-OXX-3.81.tar i turn off my phone and boot in download mode , i connect phone to pc , i selected pda and selected PhilZ-cwm6-XXLSJ-OXX-3.81.tar file and press start . At finish in odin sayed succesful , but i don't have root on my phone . And now when i turn off my phone and i see logo with galaxy s2 i9100 i have a little yellow triangle ... What can i do ? Give me a tutorial step by step .
Click to expand...
Click to collapse
for yellow triangle, install app "triangle away" from chainfire.... n pls read all instructions carefully n follow it.
Root checker dont see my rooting ... so my phone isn`t rooted .. please help me !!!
Hello,
After Searching over 2 days, I have not found 100% what I am looking for, I can't seem to locate the proper Kernel/s for my phone specifics. I have poured over many rooting/unrooting guides, I have tried all the (no computer root) programs such a Z4, Ginger Break, Sparky Root, Exynos Abuse, Framaroot... etc the list goes on.
The reason I was trying to do it without computer use is that my USB connection on my phone is very sketchy and drops in and out, but I have made the decision that I will try to root it with the computer anyway and take the risk of bricking it from an uncomplete root!
I have rooted this phone before using the zergrush method, and unrooted it successfully.... I now have the Factory Android Version 2.3.5 Running Gingerbread.XXKI3.
~~~INFO~~~
Model Number: GT-I9100
Android Version: 2.3.5
Baseband Verision: I9100XXKI3
Kernel Version: 2.6.35.7-I9100XXKI3-CL577579
[email protected] #2
Build Number: GINGERBREAD.XXKI3
Can someone please reply with the sticky's to all the programs and proper kernel/s I need to do this successfully through the computer.
Or if you know of a guide which is specific for my phone and its details, please provide the link to is as I could not find it!
I am very apprehensive about installing the wrong kernel as I know it can brick my phone, and I can't seem to find the right one!
Please help me fellow Geeks!
Thank you very much!
Barry
Barry0384 said:
Hello,
After Searching over 2 days, I have not found 100% what I am looking for, I can't seem to locate the proper Kernel/s for my phone specifics. I have poured over many rooting/unrooting guides, I have tried all the (no computer root) programs such a Z4, Ginger Break, Sparky Root, Exynos Abuse, Framaroot... etc the list goes on.
The reason I was trying to do it without computer use is that my USB connection on my phone is very sketchy and drops in and out, but I have made the decision that I will try to root it with the computer anyway and take the risk of bricking it from an uncomplete root!
I have rooted this phone before using the zergrush method, and unrooted it successfully.... I now have the Factory Android Version 2.3.5 Running Gingerbread.XXKI3.
~~~INFO~~~
Model Number: GT-I9100
Android Version: 2.3.5
Baseband Verision: I9100XXKI3
Kernel Version: 2.6.35.7-I9100XXKI3-CL577579
[email protected] #2
Build Number: GINGERBREAD.XXKI3
Can someone please reply with the sticky's to all the programs and proper kernel/s I need to do this successfully through the computer.
Or if you know of a guide which is specific for my phone and its details, please provide the link to is as I could not find it!
I am very apprehensive about installing the wrong kernel as I know it can brick my phone, and I can't seem to find the right one!
Please help me fellow Geeks!
Thank you very much!
Barry
Click to expand...
Click to collapse
U want to stay with GB or will upgrade ur GS2 to ICS/JB?
In second way ive got a simple route for u:good:
WarcoLLapsE said:
U want to stay with GB or will upgrade ur GS2 to ICS/JB?
In second way ive got a simple route for u:good:
Click to expand...
Click to collapse
Whatever is the most simple, I think JB Lite is recommended as a good ROM. Will your simple route work with JB lite? if not thats ok, regular JB is ok... Or ICS, whatever u think is less resource hogging, and will have longer battery life, and more stable... THanks!
Barry0384 said:
Whatever is the most simple, I think JB Lite is recommended as a good ROM. Will your simple route work with JB lite? if not thats ok, regular JB is ok... Or ICS, whatever u think is less resource hogging, and will have longer battery life, and more stable... THanks!
Click to expand...
Click to collapse
I dunno what do u mean by "JellyBean Lite" or "regular"!!?? Maybe Neat ROM Lite and Full versions?
My advice to u: flash stock official firmware via Odin
http://forum.xda-developers.com/showthread.php?t=1544487
then flash Philz kernel from recovery
http://forum.xda-developers.com/showthread.php?t=1877270
U r on stock JB and rooted:good:
U can make a "lite" version with root now - just by deleting a lot of bloatware.
It will save a lot of battery. But read xda before doing smth!
U can flash any custom ROM either
WarcoLLapsE said:
I dunno what do u mean by "JellyBean Lite" or "regular"!!?? Maybe Neat ROM Lite and Full versions?
My advice to u: flash stock official firmware via Odin
http://forum.xda-developers.com/showthread.php?t=1544487
then flash Philz kernel from recovery
http://forum.xda-developers.com/showthread.php?t=1877270
U r on stock JB and rooted:good:
U can make a "lite" version with root now - just by deleting a lot of bloatware.
It will save a lot of battery. But read xda before doing smth!
U can flash any custom ROM either
Click to expand...
Click to collapse
Ok I will do as you say, thank you very much, I will let you know how it goes! I might have been confused about the JB lite, etc.... Something I read somewhere, maybe I misunderstood... Thanks for the help!
WarcoLLapsE said:
I dunno what do u mean by "JellyBean Lite" or "regular"!!?? Maybe Neat ROM Lite and Full versions?
My advice to u: flash stock official firmware via Odin
http://forum.xda-developers.com/showthread.php?t=1544487
then flash Philz kernel from recovery
http://forum.xda-developers.com/showthread.php?t=1877270
U r on stock JB and rooted:good:
U can make a "lite" version with root now - just by deleting a lot of bloatware.
It will save a lot of battery. But read xda before doing smth!
U can flash any custom ROM either
Click to expand...
Click to collapse
Hello Again,
I can't seem to find anywhere here in the noob section, or in the Q & A, as I searched several different variations of the same question, But how do I find my threads, that I wrote? I know when someone replies is shows 1 new reply in your inbox, but after you view it, it gets removed from your inbox and I can't find it!!!
The only way I seem to be able to keep track of my thread is by subscribing to my own thread? that doesn't make sense to me, there should be somewhere I can go see all of the threads I wrote without subscribing? Is there such a place?
Thank you!
Bananna Barry.
WarcoLLapsE said:
I dunno what do u mean by "JellyBean Lite" or "regular"!!?? Maybe Neat ROM Lite and Full versions?
My advice to u: flash stock official firmware via Odin
http://forum.xda-developers.com/showthread.php?t=1544487
then flash Philz kernel from recovery
http://forum.xda-developers.com/showthread.php?t=1877270
U r on stock JB and rooted:good:
U can make a "lite" version with root now - just by deleting a lot of bloatware.
It will save a lot of battery. But read xda before doing smth!
U can flash any custom ROM either
Click to expand...
Click to collapse
asdf
WarcoLLapsE said:
I dunno what do u mean by "JellyBean Lite" or "regular"!!?? Maybe Neat ROM Lite and Full versions?
My advice to u: flash stock official firmware via Odin
http://forum.xda-developers.com/showthread.php?t=1544487
then flash Philz kernel from recovery
http://forum.xda-developers.com/showthread.php?t=1877270
U r on stock JB and rooted:good:
U can make a "lite" version with root now - just by deleting a lot of bloatware.
It will save a lot of battery. But read xda before doing smth!
U can flash any custom ROM either
Click to expand...
Click to collapse
Like I see TONS AND TONS of files to download there on PHilz page, How do I know which are the right ones?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from the little guy
gastonw said:
View attachment 2030367
Sent from the little guy
Click to expand...
Click to collapse
Ok I get it, I will try a little harder to find what I need.... Thanks for the help anyway lol
I'll probably **** my phone up, but oh well..
Reply
Can I update to JB or KitKat on my I9100 KI3
Of course