i recently broke my last phone, so i had it replaced and this one is running 2.3.6, i tried using that black white screen (cmd?) with the options ex: 1. unlock root etc.
2. CWM install/root etc etc. x. debugging etc
but no luck ._. is there some guide somewhere?
when i reach the rsd lite portion of the first section, my phone just boots up into the os and rsd lite gets cancelled, any ideas? ( i chose 2.3.4)when i first got it, i could do everything fine, but i couldnt boot after installing 3 different roms.
but when i install clean software it works just as it should
and when i press apply fix for "failure to boot" etc. it unlocks fine, but i cant install roms without it freezing at the dual core screen
Sounds like you got a replacement that motorola locked down the bootloader on. Everything will go as planned but you wont get unlocked. Been happening more and more to people getting replacement phones. Until a different way of unlocking is found (other the sbf flashing or fastboot flashing the unlock files) youre stuck with stock, but you can root. Bad luck.
pre4speed said:
Sounds like you got a replacement that motorola locked down the bootloader on. Everything will go as planned but you wont get unlocked. Been happening more and more to people getting replacement phones. Until a different way of unlocking is found (other the sbf flashing or fastboot flashing the unlock files) youre stuck with stock, but you can root. Bad luck.
Click to expand...
Click to collapse
how do i fastboot flash the unlock files? and since this phone is older, would anyone even try unlocking the newer models?
and im VERY disapointed in these new models, mabye its just mine, but on mine, the screen is litterally popping out, and theres a faint white square that borders the actual lcd, and the on/off/fingerprint scanner barely has any click so its hard sometime to know if u pressed it or not .... damn you moto, im not buying another one of your phones after this one, HELLO GS3 :d
wasssabi5 said:
how do i fastboot flash the unlock files? and since this phone is older, would anyone even try unlocking the newer models?
and im VERY disapointed in these new models, mabye its just mine, but on mine, the screen is litterally popping out, and theres a faint white square that borders the actual lcd, and the on/off/fingerprint scanner barely has any click so its hard sometime to know if u pressed it or not .... damn you moto, im not buying another one of your phones after this one, HELLO GS3 :d
Click to expand...
Click to collapse
If youre already seeing those type problems, you might want to notify warranty department again. Sounds like a dud replacement. As for the fastboot thing, check out the stockier noob guide first then search for those files. I dont have them anymore or I'd pass em to you.
Sticky, not stockier
I can help you using the same process I went through with my phone, but I have to warn you I won't be responsible for anything that happens to your phone. If interested PM me
sent u a pm but u didnt answer
So I've seen this question covered a few times but not sure if my situation is the same as the ones that have been answered prior.
I have a 1-1/2 year old S4 that I rooted when I received it, using whatever flavor of the day rooting method was out there. I have never used any kind of custom firmware with this device, just rooted and disabled some of the built in features like jedi hand wave mode, follow my eyes, etc. (yeah I know those aren't the real names)
Over the past few days I've been noticing apps not being able to open, the screen would go black for a second like the app was launching and then it would return to the home screen. Also a few times the notification bar would flicker while trying to open an app. So I decided to reboot today and now it is stuck at the verizon boot screen.
I've tried all of these options:
Pull battery for 30 sec, remove and replace sim card, replace battery boot.
go into recovery mode and wipe cache
go into recovery and do factory reset
Of course none of these options worked, which is why this thread exists.
now the next option I'm seeing when I'm looking for an answer is either
replace/update the firmware
return to verizon
I guess I'm wondering if the first option is even available to me since I never flashed anything custom before? If it is, I'm sure there's a wonderful thread here that would walk me through the process, if anyone would be so kind as to point me there. I'm just a little confused over what's available in my particular flavor of firmware.
Or, is there a verizon flavor that I could update to and be able to root as well? I remember when I originally rooted it was suggested to keep the older version so you wouldn't get locked in to not being able to do any custom stuff, but not sure if that's been overcome since. I don't need anything fancy, just a rooted phone works for me.
If updating is not an available option for me, is a verizon return my next step? And if so, can/should I remove signs of rooting before sending it in?
My husband and I were in the process of trying to flash a new ROM onto our TF201, but hit an issue with the ASUS unlock utility app. We've had it for a few years and it's getting pretty slow and non-responsive even for simple stuff. My husband suggested we try AndroWook based on his last round of research. The tablet has already been rooted in the past, so he started first with unlocking it.
He was following along with wwjoshdew's video and at 1:47 into the video where you open the app and hit accept, but the screen looks different on our tablet. Everything in the top part looks the same, but the screen ends with the last chunk of text at the bottom, but no "Agree" check box and no button at the bottom. We can't scroll or change the size of the screen in any way to see the rest of the window.
I carefully back traced the steps (wasn't much at that point) and found in the ASUS support page, the utility description says
Version V6
Description Unlock Device App: Unlock boot loader(Only works with TF201 ICS OS)
Notice: 1. Only suitable for Andriod 4.0 Ice Cream Sandwich OS version.
So I double checked the tablet and it's running 4.1.1.
Is this why the app doesn't show the button?
Do we need to get the tablet back to 4.0 before moving on? And if so, how?
Is there another process you guys would recommend?
Thanks for any help!
hanuszia said:
My husband and I were in the process of trying to flash a new ROM onto our TF201, but hit an issue with the ASUS unlock utility app. We've had it for a few years and it's getting pretty slow and non-responsive even for simple stuff. My husband suggested we try AndroWook based on his last round of research. The tablet has already been rooted in the past, so he started first with unlocking it.
He was following along with wwjoshdew's video and at 1:47 into the video where you open the app and hit accept, but the screen looks different on our tablet. Everything in the top part looks the same, but the screen ends with the last chunk of text at the bottom, but no "Agree" check box and no button at the bottom. We can't scroll or change the size of the screen in any way to see the rest of the window.
I carefully back traced the steps (wasn't much at that point) and found in the ASUS support page, the utility description says
Version V6
Description Unlock Device App: Unlock boot loader(Only works with TF201 ICS OS)
Notice: 1. Only suitable for Andriod 4.0 Ice Cream Sandwich OS version.
So I double checked the tablet and it's running 4.1.1.
Is this why the app doesn't show the button?
Do we need to get the tablet back to 4.0 before moving on? And if so, how?
Is there another process you guys would recommend?
Thanks for any help!
Click to expand...
Click to collapse
It works on 4.1.1 too
I think the problem is your tablet's rooted status.
Try to restore factory settings
Then unlock your prime
Root it
Flash custom recovery
Finally flash custom rom
I hope it helps
Hi there , after soft bricking my phone intentionally because i wanted to downgrade form O to MM which i thought it would be relatively easy to find a stock firmware(the full one) well ...(i was wrong), Xda is not as content rich as you may think, and no one seems to offer any advice or answer for that matter, compared to other forums it lacks a lot.
After flashing more than 5 corrupted firmwares i found one that is working perfectly fine.
Steps:
1-Enter fastboot ( power + vol up)
2- Run (flashall_AFT.cmd) , download link below.... (this is the full firmware no bull**** no missing files) .
That's it... piece of cake
First impression: the bass is more rich and vibrant as many have said so cause the O version was an absolute rubbish like it's battery life , i'm yet to see the battery performance on this MM and i'll be updating the thread with SOT SS after flashing Magisk and installing debloater module.
Download link :
<Mod edit: Link removed>
There are some other newer N full versions but i haven't tested them.
[
i already had that file which i got a few months ago but never used it. i was a noob about this zenfone.
but ur title says its mm, its not , its nougat, 7.11. its the last nougat b4 oreo was released, it uses the same base fw, iirc, as my post about manually flashing 7.11 but without the radios, https://forum.xda-developers.com/zenfone-3-zoom/how-to/manually-update-to-7-11-t3815703
my memory could be wrong though, but file name suggests its 7.11
- [firmware27]WW_ZE553KL_71.60.139.30_MR4_user_20180306173656_release.zip
long story short i eventually flashed it a couple of weeks ago, it does flash successfully, well most of the time, and looks legit, i just wish i knew its original source, i think it was someone named marco, as theres lots of files within that zip.....but it seems legit.
but why are u hosting it on the clickbait site. i might up it to androidfilehost which is a no bs hosting site.
i did create a twrp flashable full stock 6.01 mm firmware, im still testing it as it doesnt always flash completely in twrp, about 8 out of 10 times it flashes correctly. but its hard to test on a dead no display/no touch screen phone
edit: correction, not clickbait, but need to signup
vincom said:
[
i already had that file which i got a few months ago but never used it. i was a noob about this zenfone.
but ur title says its mm, its not , its nougat, 7.11. its the last nougat b4 oreo was released, it uses the same base fw, iirc, as my post about manually flashing 7.11 but without the radios, https://forum.xda-developers.com/zenfone-3-zoom/how-to/manually-update-to-7-11-t3815703
my memory could be wrong though, but file name suggests its 7.11
- [firmware27]WW_ZE553KL_71.60.139.30_MR4_user_20180306173656_release.zip
long story short i eventually flashed it a couple of weeks ago, it does flash successfully, well most of the time, and looks legit, i just wish i knew its original source, i think it was someone named marco, as theres lots of files within that zip.....but it seems legit.
but why are u hosting it on the clickbait site. i might up it to androidfilehost which is a no bs hosting site.
i did create a twrp flashable full stock 6.01 mm firmware, im still testing it as it doesnt always flash completely in twrp, about 8 out of 10 times it flashes correctly. but its hard to test on a dead no display/no touch screen phone
Click to expand...
Click to collapse
Yeah i saw your post a couple of days ago and it is legit , about the file hosting it's not clickbait it's just 4shared and this little guy is older than the xda :laugh::laugh: , i agree that the androidfilehost is faster and more convenient but i'm not the uploader , i just copied it from another source, it would be great if you re-upload it for others and i will update the link.
Now we come to testing: i tested this myself and it is 6.0.1 for sure but i don't remember which release it was cause i updated to 7.1.1 20.32.67.25 release for various reasons, mainly for battery life (spoiler: not much difference and it's still poor) and i will keep flashing / debloating apparently in (in search of incredible) but i'm quite sure this phone is hopeless without a custom ROM from scratch as the amount of services and wakelocks are enormous.
Why don't you participate and use your knowledge in the "allegedly upcoming" Lineage 15.1 hopefully we get a working build before the end of the year :cyclops: i'm sure you are aware of the situation.
And if you're into kernels then kernelwise this phone's kernel was made by noobs ,ASUS put an AMOLED display and they are not using it's features as the blacks are lit and power consumption by the screen is well above an LCD one of the same size.
Long story short buying this phone was/is a mistake.
I actually found the site firmware27 that was hosting 8 ww fw and a couple of cn and jp sku fw.
I tested all 8 ww skus, only 2 work without effort, 6.0.1 dated deb 2017, and the 7.1.1 which I had from a couple of months ago and use the img files in my other thread and which i though u linked here.
Ill be posting a thread and links to both of these files that i ul to afh, and my usage of them, I came to the conclusion that they are asus's fw given to their authorized service centers, they include everything not even available through asus's fw from their site.
Too bad he got most of the files corrupted when he ul'd them to g-drive, my guess
at least now we got 2 fw files to work with, but its a pia to make it a twrp non wipe flashable zip, beyond my skills at this point in time.
edit: i have the one u have linked here which i got a couple of months ago, WW-ZE553KL-11.40.86.71-MR0-user-20170410214554-release.zip,
but firmware27 doesnt have it, and i cant remember where i got it, and by its date youre correct it must be 6.0.1, nougat fw starts with "V20".
so there are actually 3 working fastboot flashable FW out in the wild, boy arent we lucky
i have this phone because a couple of months ago i helped my friend flash fw on it because he was getting poor data signal, i soft bricked and had to learn how to unbrick it, which i did.
its mine as a couple of weeks ago, he dropped it a few feet onto ceramic floor and the screen is dead, no display, no touch, lcd is cracked under the top glass which actually has no cracks, and thats how im using it lol.
i was going to use it as a security camera but i had to learn how to control it remotely, which i did, that was a flashing adventure w/out a working screen
vincom said:
I actually found the site firmware27 that was hosting 8 ww fw and a couple of cn and jp sku fw.
I tested all 8 ww skus, only 2 work without effort, 6.0.1 dated deb 2017, and the 7.1.1 which I had from a couple of months ago and use the img files in my other thread and which i though u linked here.
Ill be posting a thread and links to both of these files that i ul to afh, and my usage of them, I came to the conclusion that they are asus's fw given to their authorized service centers, they include everything not even available through asus's fw from their site.
Too bad he got most of the files corrupted when he ul'd them to g-drive, my guess
at least now we got 2 fw files to work with, but its a pia to make it a twrp non wipe flashable zip, beyond my skills at this point in time.
edit: i have the one u have linked here which i got a couple of months ago, WW-ZE553KL-11.40.86.71-MR0-user-20170410214554-release.zip,
but firmware27 doesnt have it, and i cant remember where i got it, and by its date youre correct it must be 6.0.1, nougat fw starts with "V20".
so there are actually 3 working fastboot flashable FW out in the wild, boy arent we lucky
i have this phone because a couple of months ago i helped my friend flash fw on it because he was getting poor data signal, i soft bricked and had to learn how to unbrick it, which i did.
its mine as a couple of weeks ago, he dropped it a few feet onto ceramic floor and the screen is dead, no display, no touch, lcd is cracked under the top glass which actually has no cracks, and thats how im using it lol.
i was going to use it as a security camera but i had to learn how to control it remotely, which i did, that was a flashing adventure w/out a working screen
Click to expand...
Click to collapse
All you need is one fw to start with and after that you can update to whichever release you want without any problem , strait forward from asus site and update via sd card even if it's rooted or bootloader unlocked, you can do anything and even get updates as FOTA app works as soon as you boot cause asus update procedure is very primitive HOWEVER it should be on stock recovery and honestly twrp is pretty much useless here and i didn't seem to need it in anything with this device!! (i use magisk to root), it's not like there's half a dozen of custom ROMs to flashed , the only possible modification is within the stock fw and that's our limit.
If you find a screen replacement under 50$ it is worth it , i knew that 2.5D glass is poor engineering and very fragile, so screen protector and case was crucial since day 1.
Notes:
Don't trust asus download center's description cause i downloaded the latest nougat release before the Oreo (as described in their section) and it turned out to be the first release of their lousy O fw.
cheapest on ebay is over $70can for aftermarket from china. cheap clone? idk
i'll stick w/my note 4 can version as my dd.
i'll upload the working fw i found for redundancy and to give users more options, 4 fw as of now.
i do have the last 7.1.1 b4 oreo
these are actual service tech fw's available to them for restoring phones. supposedly can be use by asus flash tool which i haven't used yet.
they dont change the bootloader lock status or the frp/google account status (to do that use fastboot wipe config)
since it is in a raw format the individual files can be flashed via fastboot for those that would need it.
fyi all fw are exactly the same except for the recovery, boot, system and , emmc_appsboot_8953.mbn(bootloader ?), the radios and other files are the same
i cant use the builtin updater because i cant seem to get the right button combo to work in stock recovery to flash the update and thats after i reinstall the stock recovery and remove root, flashing from bootloader is a breeze.
the only one i can't get adb enabled so i can mirror the screen is the mm 11.40.86.71, the same one you have linked here
when i try to make a custom stock flashable rom it always fails to boot, would u know why?,
vincom said:
cheapest on ebay is over $70can for aftermarket from china. cheap clone? idk
i'll stick w/my note 4 can version as my dd.
i'll upload the working fw i found for redundancy and to give users more options, 4 fw as of now.
i do have the last 7.1.1 b4 oreo
these are actual service tech fw's available to them for restoring phones. supposedly can be use by asus flash tool which i haven't used yet.
they dont change the bootloader lock status or the frp/google account status (to do that use fastboot wipe config)
since it is in a raw format the individual files can be flashed via fastboot for those that would need it.
fyi all fw are exactly the same except for the recovery, boot, system and , emmc_appsboot_8953.mbn(bootloader ?), the radios and other files are the same
i cant use the builtin updater because i cant seem to get the right button combo to work in stock recovery to flash the update and thats after i reinstall the stock recovery and remove root, flashing from bootloader is a breeze.
when i try to make a custom stock flashable rom it always fails to boot, would u know why?,
Click to expand...
Click to collapse
I would say let's find a solution to the easy problem and not the to hard one, you want to take 2 blurry steps instead of 2 obvious ones !! i can help you with stock ones just explain more what's the exact problem ? i didn't understand so correct me if i'm wrong : you have no visual indication as the screen is dead right ? or can't boot into the stock recovery at all ?
if you have the bootloader unlocked and no screen indication :
power up wait for the vibration and press volume down 4 times then press power to boot into recovery
wait 10 sec and press volume down 2 times to (update form sd card)
rename the fw .zip file to A so it can be sorted first and it should be in root directory and alone to prevent any miss hits and press volume down 1 time.
and if that didn't work just flash the fw that's provided and redo the steps if you want to update , congratulations now you have a working internals and up to date phone that you can't even boot into it's home screen cause the boot confirmation by email and password is near impossible to bypass without a working display. (there is some methods though )
I don't see the point of a phone without a display at least temporary.
This phone is a joke in it's normal condition let alone in the non , don't waste your time and sell it as parts, if you get 40$ take it.
sam.fisher190 said:
I would say let's find a solution to the easy problem and not the to hard one, you want to take 2 blurry steps instead of 2 obvious ones !! i can help you with stock ones just explain more what's the exact problem ? i didn't understand so correct me if i'm wrong : you have no visual indication as the screen is dead right ? or can't boot into the stock recovery at all ?
if you have the bootloader unlocked and no screen indication :
power up wait for the vibration and press volume down 4 times then press power to boot into recovery
wait 10 sec and press volume down 2 times to (update form sd card)
rename the fw .zip file to A so it can be sorted first and it should be in root directory and alone to prevent any miss hits and press volume down 1 time.
and if that didn't work just flash the fw that's provided and redo the steps if you want to update , congratulations now you have a working internals and up to date phone that you can't even boot into it's home screen cause the boot confirmation by email and password is near impossible to bypass without a working display. (there is some methods though )
I don't see the point of a phone without a display at least temporary.
This phone is a joke in it's normal condition let alone in the non , don't waste your time and sell it as parts, if you get 40$ take it.
Click to expand...
Click to collapse
not impossible, very doable to use a phone even with a dead screen.
after alot of trials and error ...from a new flashed stock thats was completely wiped, i can get to a remotely controlled/viewed phone in about 10mins .
i will write up a tut on that.
i can get that done with all the availabe working raw fw except with the mm 2017/04 release
yes, i have a completely dead screen, no display, no touch. all other phone functions work.
the reason for stock recovery procedure was to update to oreo, but i really dont care if i get it. just seeing if its doable.
playing with it for giggles, going to be a security camera as the cam is vg, useless as a phone that has no working screen.
i can be the sacrificial tester if need be, pretty hard to hardbrick this phone as i also have the back cover off so to disconnect the battery connector for those hard soft brick occasions and/or to make sure phone was completely off b4 doing something
I think I killed my phone please help Asus ze553kl
This was happened my phone is Asus ze553kl android Oreo NOTE: I already rooted my phone unlocked bootloader using Asus tool installed twrp and magisk...
when I was using whatapp suddenly my screen got frozen and I restarted my phone it stuck in Asus logo I tried does it goes into twrp even twrp also stuck in logo then I tried flashing using adb and fastboot while doing that I entered this COMMAND fastboot format or erase boot after I flashed everything I rebooted this time it gone worse there is no logo I see only powered by android then no hope after I saw this thread and planned to downgrade downloaded 2gb file and I made clean flashing manually no use i don't see the logo again then I went for auto flashall command when I clicked that something happens it said searching for your device but
After waited for so long I unplugged the cable try to on the phone it's fully blank no sign of power pls help guys I'm begging you all please reply and give me a solution
Nikido2930 said:
This was happened my phone is Asus ze553kl android Oreo NOTE: I already rooted my phone unlocked bootloader using Asus tool installed twrp and magisk...
when I was using whatapp suddenly my screen got frozen and I restarted my phone it stuck in Asus logo I tried does it goes into twrp even twrp also stuck in logo then I tried flashing using adb and fastboot while doing that I entered this COMMAND fastboot format or erase boot after I flashed everything I rebooted this time it gone worse there is no logo I see only powered by android then no hope after I saw this thread and planned to downgrade downloaded 2gb file and I made clean flashing manually no use i don't see the logo again then I went for auto flashall command when I clicked that something happens it said searching for your device but
After waited for so long I unplugged the cable try to on the phone it's fully blank no sign of power pls help guys I'm begging you all please reply and give me a solution
Click to expand...
Click to collapse
sounds like a hardware failure not a software/firmware problem, let it rip, time for another phone, phone not worth getting it repaired even if u do it yourself
vincom said:
sounds like a hardware failure not a software/firmware problem, let it rip, time for another phone, phone not worth getting it repaired even if u do it yourself
Click to expand...
Click to collapse
sam.fisher190 said:
Hi there , after soft bricking my phone intentionally because i wanted to downgrade form O to MM which i thought it would be relatively easy to find a stock firmware(the full one) well ...(i was wrong), Xda is not as content rich as you may think, and no one seems to offer any advice or answer for that matter, compared to other forums it lacks a lot.
After flashing more than 5 corrupted firmwares i found one that is working perfectly fine.
Steps:
1-Enter fastboot ( power + vol up)
2- Run (flashall_AFT.cmd) , download link below.... (this is the full firmware no bull**** no missing files) .
That's it... piece of cake
First impression: the bass is more rich and vibrant as many have said so cause the O version was an absolute rubbish like it's battery life , i'm yet to see the battery performance on this MM and i'll be updating the thread with SOT SS after flashing Magisk and installing debloater module.
Download link :
<Mod edit: Link removed>
There are some other newer N full versions but i haven't tested them.
Click to expand...
Click to collapse
THREAD CLOSED and download link removed. 4shared.com requires to have an account for downloading i.e. not accepted as file host on XDA.
Please advise the moderators' team when ready to provide a download link from an accepted file host.