Just wanna make sure bout downgrading to cm7....... I'm currently on cm 10 FXP 152 kernel..... So do I have Flash an older kernel if I want to flash cm7. 2???
Xperia Live With Walkman
Rom : CM10 Nightly Built 20121224
Kernel: FXP 152
Greyjawripper said:
So do I have Flash an older kernel if I want to flash cm7. 2???
Click to expand...
Click to collapse
Yes. Just follow the instructions of every ROM/Kernel or Mod thread before flashing anything.
XperienceD said:
Yes. Just follow the instructions of every ROM/Kernel or Mod thread before flashing anything.
Click to expand...
Click to collapse
So FXP 152 kernel won't work on Cm7.2
Xperia Live With Walkman
Rom : CM10 Nightly Built 20121224
Kernel: FXP 152
Greyjawripper said:
So FXP 152 kernel won't work on Cm7.2
Click to expand...
Click to collapse
CM7 is GB based so no.
Ok thank for info
Xperia Live With Walkman
Rom : CM10 Nightly Built 20121224
Kernel: FXP 152
Related
There is sth wrong with the kernel of FXP044 and FXP045,so I uploaded this one.
View attachment 774581
thank you, buddy
thanks dude for this.. i got haptic feedback and vibration on fxp045 using kernel form fxp043
No,it doesn't work,so I use the kernel of fxp043
i am using fxp045 with fxp045 kernel ,
can i use this kernel on cyanogenmod running and is flashing method is same ?
xperia ray said:
i am using fxp045 with fxp045 kernel ,
can i use this kernel on cyanogenmod running and is flashing method is same ?
Click to expand...
Click to collapse
If you want to install cyanogenmod all what needs is to install update.zip from your current fxp045 kernel. Dont need reflash kernel. It's same.
Cyanogenmod is same that fxp firmware, am I not right?
But I recommend you to flash new kernel by knzo, it is here: http://forum.xda-developers.com/showthread.php?t=1336375 Read carefully all notes. At this young kernel wifi, vibro and all other work fine in cyanogenmod and miui.
Good luck.
兰州烧饼 呵呵 thanks
thank you buddy now wifi working on cm7.
Is it possible to have a common kernal for CM 7.2 and LLW stock+rooted.
I think rage kernel will work. not sure.
Nope, there is no such kernel, which will work on both stock and CM7.2.
Rage Kernel only works with stock and stock-based ROMs.
It will be better if some one get one-that work on both.. As fresh ROMs come out all have to flash new kernel before installing ROM
b00tbu9 said:
It will be better if some one get one-that work on both.. As fresh ROMs come out all have to flash new kernel before installing ROM
Click to expand...
Click to collapse
Cannot be made, as stock kernel has own requirements and custom ROMs other requirements.
Sent from my Xperia Live using xda premium
Do I need a custom kernel for CM7.2 or a stock kernel will suffice?
anivesh93 said:
Do I need a custom kernel for CM7.2 or a stock kernel will suffice?
Click to expand...
Click to collapse
As mentioned above. No, won't work. Use either the FXP kernel that comes with the ROM or use Rage Kernel For FXP. Alternative is kamarush's kernel for MiniCMsandwich.
neocyke said:
As mentioned above. No, won't work. Use either the FXP kernel that comes with the ROM or use Rage Kernel For FXP. Alternative is kamarush's kernel for MiniCMsandwich.
Click to expand...
Click to collapse
I am confused, will Krsh Kernel work with CM7.2? I thought Krsh kernel is for stock ROMs only. If Krsh kernel works with CM7.2 then I will try it, because the FXP kernel inside CM7.2 drains my battery very fast.
hafizimtiaz said:
I am confused, will Krsh Kernel work with CM7.2? I thought Krsh kernel is for stock ROMs only. If Krsh kernel works with CM7.2 then I will try it, because the FXP kernel inside CM7.2 drains my battery very fast.
Click to expand...
Click to collapse
Only fxp and rage kernel(FXP version) will work. with FXP's CM 7.2. Got it?
Hello, someone help me about this:
The kernel Rage Kernel v3.2 (http://forum.xda-developers.com/showthread.php?t=1398910) is the best option to use with cyanogenmod CM9?
Thanks for everybody.
Rage Kernel is great but I think the best option would be the one that comes with CM9 just due to the the testing.
markaobr said:
best option to use with cyanogenmod CM9?
Click to expand...
Click to collapse
is the kernel what comes with the cm9 version. some times there build new files in that the cm version needs to run stable.
Sent from my head using my fingers
cm9 matching using kernel fxp
FXP 127 kernel is recommended
markaobr said:
best option to use with cyanogenmod CM9
Click to expand...
Click to collapse
I am using CM9, currently there is some problem with the CM9 kernel.
So You should use "FXP 127" kernel with CM9, its very stable.
is thr any1 try this new rom ad?
before v2.55, 2.54 had a lot of problem
tis problems MAYBE cum from CM10
i dun noe which version of CM10 can be used
is any1 had used the latest paranoid without problem? ( wifi, camara and etc)
[sry for my bad english]
you can flash lastest ver cm10
PA Haida v2.55 in Xperia Neo V
arch_saiful said:
you can flash lastest ver cm10
Click to expand...
Click to collapse
I flashed CM10 151 ... wifi not working ... even in setup process, mobile data auto turned on ... any fix?
you have to use fxp 145 kernel..latest kernel (146 onwards) are not working...not even PACman kernel or LUPUS...
tried myself..I am on fxp 145 kernel with PA 2.55..
XperiaNeoVNoob said:
you have to use fxp 145 kernel..latest kernel (146 onwards) are not working...not even PACman kernel or LUPUS...
tried myself..I am on fxp 145 kernel with PA 2.55..
Click to expand...
Click to collapse
I had installed CM10 fxp 203 and PA 2.55 but my phone
doesnt used to boot sometimes and i had to take out d
battery then it used to start and CM 10 wifi and front Cam
were not working!!!
Plz help
3.x Kernel Release Thread
As usual, it's all at your own risks incl. eventual bugs, etc. Please wipe before flashing.
3.0.8-nAa-03 @a3f2ebe1e2 (may 04)
http://d-h.st/FtA
CM10 only - WiFi not packed
3.0.8-nAa-02+ @ba89a11b98 (apr 27)
http://d-h.st/peH
Apparently this works only on CM10, NOT CM9 and NOT CM10.1 (it uses nAa's ramdisk)
Nice bro .. i will test it Now wirh CM10.1 Mike build
Edit: nAa logo flicker and then black screen and stuck on it .. i'm on Mike build 24/4/2013 .. recovery working good
mido_fedo said:
Edit: nAa logo flicker and then black screen and stuck on it .. i'm on Mike build 24/4/2013 .. recovery working good
Click to expand...
Click to collapse
Thanks for the report so it's not the ROM... I really need to figure what's causing this since I'm just using the mainline tree right now... thank you!
It boots fine on cm10 but Wifi doesn't work do you have modules.
adridu59 is it work ot CM9?Do you try the kernel and where is the download link?
Spellbound_91 said:
adridu59 is it work ot CM9?Do you try the kernel and where is the download link?
Click to expand...
Click to collapse
Link back online.
So... for some of you it works and others get black screen like me... that's weird. Got black screen on CM9.1 personally.
EDIT: wifi firmware is here
http://forum.xda-developers.com/showpost.php?p=40581766&postcount=2
but it should be in the ramdisk (nAa's)...
adridu59 said:
Link back online.
So... for some of you it works and others get black screen like me... that's weird. Got black screen on CM9.1 personally.
Click to expand...
Click to collapse
OK,now I'll flash CM9 and report to you!
adridu59 said:
Link back online.
So... for some of you it works and others get black screen like me... that's weird. Got black screen on CM9.1 personally.
EDIT: wifi firmware is here
http://forum.xda-developers.com/showpost.php?p=40581766&postcount=2
but it should be in the ramdisk (nAa's)...
Click to expand...
Click to collapse
i think it's same problem happedn with kernel for hadia on nAa thread
working on CM10 but not working on CM10.1
is this kernel works in wt19i ( sony live with walkman ) ?
[FONT="Arial ="5"]
• Sony Live with Walkman
mido_fedo said:
i think it's same problem happedn with kernel for hadia on nAa thread
working on CM10 but not working on CM10.1
Click to expand...
Click to collapse
Wird but Mike includes nAa's kernel in his builds doesn't he?
airjyp said:
is this kernel works in wt19i ( sony live with walkman ) ?
[FONT="Arial ="5"]
• Sony Live with Walkman
Click to expand...
Click to collapse
I don't think so, it's compiled for hallon (MT15i), should work on MT11i too
adridu59 said:
Link back online.
So... for some of you it works and others get black screen like me... that's weird. Got black screen on CM9.1 personally.
EDIT: wifi firmware is here
http://forum.xda-developers.com/showpost.php?p=40581766&postcount=2
but it should be in the ramdisk (nAa's)...
Click to expand...
Click to collapse
NAa's ramdisc is for cm10 for cm9 and cm10.1 you who'd need appropriate ramdisc
adridu59 said:
Wird but Mike includes nAa's kernel in his builds doesn't he?
I don't think so, it's compiled for hallon (MT15i), should work on MT11i too
Click to expand...
Click to collapse
yes Mike includes nAa's kernel in his builds but kernel include in last build (24/4) he upload it not work and then he upload new kernel (Test 2) and this test working now and i think Mike edit something on kernel to work on CM10.1
adridu59 said:
Wird but Mike includes nAa's kernel in his builds doesn't he?
I don't think so, it's compiled for hallon (MT15i), should work on MT11i too
Click to expand...
Click to collapse
ok thanks i will try it
[FONT="Arial ="5"]
• Sony Live with Walkman
Tenacius D said:
NAa's ramdisc is for cm10 for cm9 and cm10.1 you who'd need appropriate ramdisc
Click to expand...
Click to collapse
mido_fedo said:
yes Mike includes nAa's kernel in his builds but kernel include in last build (24/4) he upload it not work and then he upload new kernel (Test 2) and this test working now and i think Mike edit something on kernel to work on CM10.1
Click to expand...
Click to collapse
Thanks guys. I don't have much time these days but I'll look into it later
My XN (Hallon) booted into system on CM10 (4.1.2) fxp 216
Spellbound_91 said:
My XN (Hallon) booted into system on CM10 (4.1.2) fxp 216
Click to expand...
Click to collapse
So that confirms what Tenacius said...
It looks like nAa uses different ramdisks for different Android versions:
https://github.com/adridu59/ramdisk-3.0.x-nAa/commit/4833ba657b924caed9aff7af1389612c3ffca191
See archive files 4.0 4.1 4.2
hi please make this kernel for neo L users
Video recording, BT and fm radio works? where are wifi modules?
Now, I test:
Video recording - fron an back cameras - Work
BT - I just terned on and it work
Front and back cameras-work
FM radio - when I turned on my phone stuck and FM FC
The sound from Speaker is low.