Related
hello,
i have two questions about theses roms here:
1. some roms have the 3d cube from the HTC touch enabled. is this cube loaded into the program memory (ram) all the time or is it only loaded from the rom during the first usage? i don't use it and i don't know if i waste some ram or not.
btw: is it possible to create some .cab files for touchflo and this 3d cube? with that no extra touch roms would be needed and everyone could install them on his neutral windows mobile 6 rom, which flashed on this device.
2. in the past we could unlock the extended rom and use it as a normal storage memory. is there any way in windows mobile 6 to use it like that?
LordDeath said:
hello,
i have two questions about theses roms here:
1. some roms have the 3d cube from the HTC touch enabled. is this cube loaded into the program memory (ram) all the time or is it only loaded from the rom during the first usage? i don't use it and i don't know if i waste some ram or not.
btw: is it possible to create some .cab files for touchflo and this 3d cube? with that no extra touch roms would be needed and everyone could install them on his neutral windows mobile 6 rom, which flashed on this device.
2. in the past we could unlock the extended rom and use it as a normal storage memory. is there any way in windows mobile 6 to use it like that?
Click to expand...
Click to collapse
Yes to all questions
1. The cube is loaded one into the memory and stays there
It's possible to make cab files but that will slow donw to os
2. yes you can open the extrom and use it as storrage
HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1]
"Bootphase"=dword:2
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash]
"Folder"="Flash Disk"
"MountAsROM"=dword:1
"MountHidden"=dword:0
"Name"="FLASH Disk Block Device"
"PartitionDriver"="mspart.dll"
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS]
"MountAsROM"=dword:0
"MountHidden"=dword:0
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1]
"MountHidden"=dword:0
that should open the ext rom
thank you gullum for your reply.
about the cab files: if these additions are loaded into the ram during the boot, whould it still slow down the device on normal running? afaik the rom is as fast as the normal storage memory.
LordDeath said:
thank you gullum for your reply.
about the cab files: if these additions are loaded into the ram during the boot, whould it still slow down the device on normal running? afaik the rom is as fast as the normal storage memory.
Click to expand...
Click to collapse
I'm not shure about that but when these extra apps cab around they were all cab files before we got them coock into the roms and our phones got slowed down to their knees
ok.
and about the extedend rom: it becomes visible, but i can't write anything on it
I'm really, really sorry if i posted this in the wrong section or what else.
I'm having problems using the Gen.Y dualboot system on my kaiser, I installed the CAB for the HTC Kaiser.
It works... but only when opening the bootmanager when Windows Mobile 6.1 is already booted, there is no way to first load the bootmenu from Gen.Y and then choose to boot Windows Mobile or Android.
The Android is installed correctly and the registry is set well to boot from the Andboot map on my SD card so there's no problem booting android.
It's just that the bootmanager doesn't startup when turning on the phone.
(I'm running Eclair 2.1g Polymod Light-Themed)
I hope someone can be of help and i really appreciate whoever even thinks of answering a possible solution.
Syntax1993
First: i used the search function and didnt get an answer
im also having this problem around 2 weeks...
im using this rom
http://forum.xda-developers.com/showthread.php?t=692763
Omega v3.4
with the Radio-Rom
Radio 2.10.50.28_2
and as you may think, my handy stucks after the executes linux code on the green HTC Logo. No one could help me, so im asking for the pro's in this forum for some answers.
Is it may possible, that every 3.14 rom makes problems with android?
so, thanks
and i hope you could help me, solve this problem
greez
Monolize
Edit:
i switched to the chuckyrom, didtn know which version.... but it also didnt work
can u just send me an rom and an android-build, which just work
download one of the Andriod versions of Mdeejay. He has truely good working ROMS. EVO, Revolution, Desire and Desire HD (even with 720p camera fixed)
I just think you data.img is corrupted .. you can try to replace it .. i rather would go for another Adriod version. Trouble shooting for Andriod SD ports is a waste of time if you dont know were to search
i download always a new data.img when i change android
so i rather think, this isnt the problem
but the mdeejay builds.... i try it
EDIT:
im doin it right, or?
the data.img in the android folder and the rootfs from the android folder intro the root of the sdcard
EDIT2:
it also stucks at the bootscreen.... this time it is white and green
any1 know, which issue keeps me away from the lovely android @ hd2?
It also happens to me when i download android and exracted to my sd card it stuck or frozen in the htc logo for like an 1hr
I would delete the data.img and let Android build a new one. It should do it on its own the 1st time you boot it up, it will make your 1st boot take quite awhile, probly like 10 minutes, but it should boot up that way as long as you haven't changed or modified anything else within your /Android folder. It may just be because of the data.img that you included in the folder why it won't boot up for you
ok, i let android "build" a data.img by it self, but it also hangs at the bootlogo
and i didn't changed anything in the android folder, cuz i dont know what
i changend in the meanwhile the hspl from 2 to 3 back to 2
i changed several roms...... several android builds but nothing works :'(
dont some1 know what my problem is?
i always use task29 b4 i flash a ne rom and radio
Monolize said:
ok, i let android "build" a data.img by it self, but it also hangs at the bootlogo
and i didn't changed anything in the android folder, cuz i dont know what
i changend in the meanwhile the hspl from 2 to 3 back to 2
i changed several roms...... several android builds but nothing works :'(
dont some1 know what my problem is?
i always use task29 b4 i flash a ne rom and radio
Click to expand...
Click to collapse
Witch type/syze is your SD?
got an
SanDisk 8GB SDHC
it always worked with it.....
after 3 months i wanna use android again and nothing works
Monolize said:
got an
SanDisk 8GB SDHC
it always worked with it.....
after 3 months i wanna use android again and nothing works
Click to expand...
Click to collapse
My suggestion Sir is to
-try other SD card or
-to format current SD card
tried another sd card and also yet on another handy with an 2gb card - not sdhc
and it dont work ether
when i download a new android build, the only thing i have to do is to put the rootfs.img out of the android folder into the root if the sdcard. something else?
Monolize said:
tried another sd card and also yet on another handy with an 2gb card - not sdhc
and it dont work ether
when i download a new android build, the only thing i have to do is to put the rootfs.img out of the android folder into the root if the sdcard. something else?
Click to expand...
Click to collapse
let's start from the beginning. witch android built will you use/install?
http://forum.xda-developers.com/showthread.php?t=859817
this is the Android build - someone told me the builds from "MDJ" are the best
Monolize said:
http://forum.xda-developers.com/showthread.php?t=859817
this is the Android build - someone told me the builds from "MDJ" are the best
Click to expand...
Click to collapse
Okay, It's the same as the one I have tested in the past.
Steps to do:
1) Download v. 4.3
Download 1GB data.img
2) Prepared your SD:
- Format your SD (select FAT32)
3) Create a folder on your SD named: "Android"
4) Open the "MDJ_FroYo_HD_v._4.3_MDJ_S7.5HD.zip" archive with winzip/7zip Set the 10 files folders in your Android folder on your SD
Code:
- AndroidApps (folder)
- media (folder)
- zImage
- initrd.gz
- rootfs.img
- startup.txt
- system.ext2
- CLRCAD.exe
- haret.exe
- ts-calibration
5) Open the "data.zip" archive with winzip/7zip Set the data.img file in your Android folder on your SD
(You don't need to have a other file/folder on your SD except the one I mentioned.)
6) insert your SD into your device
7) Navigate with your device to your SD/Android folder; press on CLRCAD.exe and than on haret.exe
The first boot up can take some time (about 15min) but after that it must works well.
green logo ey?
When i was installing android on mine HD2 all i needed was to UPDATE MY RADIO to 2.15 ! and it passed the green logo just fine! I really doubt it has anything to do with sd card...
ok i followed the steps indicatet above AND flashed Radio_Leo_2.15.50.14
hope it works...
i tell ya
btw: is it normal, that there will be the logo for about 15 min?
in older versions, there was a linux-dos-lookalike screen where u know that the handy was doin something
where did he go??
edit after 20 min:
still hangin on the green/white htc logo
i did ALL files into the Android folder, no files nowhere else
dont know whats wrong
EDIT next day 11:50AM:
thank you kurt-willems
but also your tutorial wont help me :'(
i absolutely dont know what the **** is wrong.....
any ideas, why i cant start android?
Monolize said:
any ideas, why i cant start android?
Click to expand...
Click to collapse
Fore the moment out of Ideas.
- Radio is correct
- Rom; I don't see the problem
- Steps are follow like I mentioned
Maybe SD, (but you tested also on a otter SD. No?)
This worked for me.
I had the same issue for about a day, and after research of stuck on green HTC Logo with no help, and thousands of post later I came acroos an article regarding EncFiltLog.menc. Do not format your SD card with MAC or windows PC, but rather the secret is to format your SD card with your winmo phone by going to "settings" | "format SD card". It will create an exec file "EncFiltLog.menc" This file is, I guess, a partition index??? The file "EncFiltLog.menc" is hidden in windows mobile 6.x but is visible when you mount your SD card to your PC. Do not delete this file!!!!
After that just drop your android folder and it will boot up in less than 3 mins. After that, u may add all your other files. I use a 16GB card with Android and all my music and stuff with no problems. Hope this helps you.
Seriously man, you're a life saver. This has been kicking my butt for two days now.
shekerdothis said:
I had the same issue for about a day, and after research of stuck on green HTC Logo with no help, and thousands of post later I came acroos an article regarding EncFiltLog.menc. Do not format your SD card with MAC or windows PC, but rather the secret is to format your SD card with your winmo phone by going to "settings" | "format SD card". It will create an exec file "EncFiltLog.menc" This file is, I guess, a partition index??? The file "EncFiltLog.menc" is hidden in windows mobile 6.x but is visible when you mount your SD card to your PC. Do not delete this file!!!!
After that just drop your android folder and it will boot up in less than 3 mins. After that, u may add all your other files. I use a 16GB card with Android and all my music and stuff with no problems. Hope this helps you.
Click to expand...
Click to collapse
after that u can delete EncFiltLog.menc file ?
Hello.
I'm about to buy a USA T-Mobile HTC HD2 Leo - the lad port an Android 2.3 rom and he says, runs like a charm.
But, I wonna have both OS, WinMo 6.5 with TouchFlo3D & Android 2.3.
Is it possible (I think yes, I saw some videos in YouTube)...
Is there (here) any rom with both these OS together?
Kind regards,
Rom
only by running android from the sd card. Currently there is no way to put winmo and something else both on the internal nand.
samsamuel said:
only by running android from the sd card. Currently there is no way to put winmo and something else both on the internal nand.
Click to expand...
Click to collapse
Don't care having them both in internal mem, mate.
What you wrote is fine by me.
Any rom with both them on board (Android on SD card) and boot-prompt screen when you're starting the HD2?
sorry, not something i can help with, never run AD from sd card.
There was an app, something like "boot menu" - detects Android on SD on boot and asks which OS to run, but I can't find it right now...
Pabliell said:
There was an app, something like "boot menu" - detects Android on SD on boot and asks which OS to run, but I can't find it right now...
Click to expand...
Click to collapse
Τοο bad! That probably is what I want.
Anyways... Any decent TouchFlo3D rom for T-Mobile HD2, here?
Can you point me something?
The EnergyRom series has an Android boot option built into it. There are a MYRIAD of Android SD ROMS out there you can put on your storage. Currently I have Energy Sencity and Android Sprint EVO camped out on my Storage. They play together quite nicely.
Try RunDroid. It supports any number of ROMs running on your SD card.
Everything you need to know is here
http://www.htchd2forum.com/windows-phone-7-on-hd2/hd2wp7androidspb-3d-multi-boot-systems-complete-guide-tech1-dwi-installer/
rogem_kk said:
Everything you need to know is here
http://www.htchd2forum.com/windows-...t-systems-complete-guide-tech1-dwi-installer/
Click to expand...
Click to collapse
Actually, this is the wrong forum for your "ad" -- he is not looking for WP7 as a base, and it will only dual-boot, using a theme that was copied from mskip.
RunDroid will allow him to run WM6.5x and multiple versions of any Android SD ROM, not limited to dual-booting.
MarkAtHome said:
Actually, this is the wrong forum for your "ad" -- he is not looking for WP7 as a base, and it will only dual-boot, using a theme that was copied from mskip.
RunDroid will allow him to run WM6.5x and multiple versions of any Android SD ROM, not limited to dual-booting.
Click to expand...
Click to collapse
Exactly. I don't wonna have W7 & Android, but WM6.5 & Android (Dual boot) instead.
lupus_hegemonia said:
Exactly. I don't wonna have W7 & Android, but WM6.5 & Android (Dual boot) instead.
Click to expand...
Click to collapse
In addition to RunDroid, you can also try MSkip's HD2 Android SD Loader...
Both are very good for your needs, the main difference being that RunDroid enables you to run WM6.5.x on your device, and as many SD Android ROMs you can fit on your SD card.
MarkAtHome said:
Actually, this is the wrong forum for your "ad" -- he is not looking for WP7 as a base, and it will only dual-boot, using a theme that was copied from mskip.
RunDroid will allow him to run WM6.5x and multiple versions of any Android SD ROM, not limited to dual-booting.
Click to expand...
Click to collapse
Sorry, not my site. I am new to the HD2 world as my main phone is the SE X10. Sorry for spamming but that site is the only one that got me going with dual booting.
rogem_kk said:
Sorry, not my site. I am new to the HD2 world as my main phone is the SE X10. Sorry for spamming but that site is the only one that got me going with dual booting.
Click to expand...
Click to collapse
Your heart was in the right place...
Try either the first or third sub-forum at http://forum.xda-developers.com/forumdisplay.php?f=975
Τhxs, mates.
My phone arrives in a couple of days (used - runs an Android rom), so I wonna use Android from the SD card but I want also the WM6.5 aswell - dual booting.
Thxs. I'll check EVERYTHING, as soon as my phone arrives.
Got it! The phone arrived!
I'm charging it and I'll try to find a way to have, both WinMo6.5 & Androind from SD card.
Okay... "Jobe Done". I removed the Android rom and I flashed a great WM6.5 rom (Omega - Alexander).
Now, if I wonna have an Android (in microSD card) and using it via Dual Boot prompt, how can I do it? And can I do it with ANY Android rom?
Hi there. Newbie HD2 user myself.
I'm interesting too, about these the thread says.
@lupus:
Did you found anything about that, yet?
Try this: http://forum.xda-developers.com/showthread.php?t=1094372
i'm running windows 6.5 EnergyRom HD2 Sense 2.5 Cookie v2.0 Energy and i noticed that i have a link for LAUNCH ANDROID and it says "CLRCAD.exe was not found on your storage card" proceeding to launch Haret anyway.. then it says Haret not found... HOW DO I GET THIS TO WORK???
When you download an SD android rom it usually comes with haret and clrcad. Your link is just that, a link, if you don't have SD android set up the link won't work.
now how do i set it up??
http://forum.xda-developers.com/forumdisplay.php?f=743
start reading the q&a and the android sd dev sections