Hello guys, i managed to install CWM v6.0.1.2 (recovery) on phone going on whit steps are shown here:
sites.google.com/site/projectfreexperia/download/howto-install , then install FXP202-cm-9-20130111-unofficial-pepper.zip from SD card and the gapps-ics-20120429-signed.zip . After reboot the phone stuck on CM9 logo animation. The animation is running but phone stay for minutes on that Logo animation and noting load...
And don't understand the 6 step how to do that when it can't load the OS?
6.Wipe device
from cm9 device wipe is necessary only at first flash or when you switch cm version
!!! if after boot you experience ForceClose then is recomended to reboot to recovery and wipe device
What to do now ? Please help.
I make it... just wipe data and cache from the CWM and it runs :laugh:
Case can be close!
Related
I have a strange problem:
I enter in cwm recovery flash a rom and after reboot stucking on boot logo.
Back to recovery restore whatever cm7, cm9, miui etc and everything is ok. Boot and enjoy.
I try again to flash after wiping etc but again stuck on boot screen logo.
Any ideas?
Some of those roms have instructions flash twice .
Are you wiping everything from sd card ??
Boot Loop thread top of this forum .
jje
HI
i have unlocked the bootloader of my Xperia S, then i flashed cyanogenMod 10 alpha ROM but the thng is my phone is stuck at boot animation
i tried to flash another ROM but same thing stuck at boot animation
help need please
Thanks
Did you follow the instructions well??
Flash a firmware with flashtools.
Sent from my LT26i using Tapatalk 2
Thanks for the advice i flashed a stock firmware using flashtool and it worked
but now whats the safest way to flash custom roms ?
Do you have locked or unlocked bootloader???
The safest way is to read the instructions on how to install for each rom.
I usually wipe everything before installing roms that means,in cwm factory reset,format system,wipe user data,wipe dalvik cache,wipe battery stats then install the rom.
Sent from my LT26i using Tapatalk 2
htcdesiry said:
HI
i have unlocked the bootloader of my Xperia S, then i flashed cyanogenMod 10 alpha ROM but the thng is my phone is stuck at boot animation
i tried to flash another ROM but same thing stuck at boot animation
help need please
Thanks
Click to expand...
Click to collapse
You need to extract boot.img from the CM10 zip file and then use fastboot to install it on your device, then boot into recovery to flash CM10.
Follow these intructions exactly and you should be fine http://forum.xda-developers.com/showpost.php?p=29185964&postcount=131
i followed the instruction carefully but no luck still stuck at boot animation
any solution ?
I unlocked the bootloader as per steps everything went well. When I reboot it shows FXP logo and then it is stuck at Xperia logo not sure what to do any idea?
i faced the same problem as you guys... and i found the solution 1.wipe cache, 2. wipe dalvik cache 3.format system data. it will warn you but never bother since yoiu want a new custom rom installed to your device. all your old system files will be deleted and now it will ask to install a new rom.. 4.install from zip. done. now wipe cache and dalvik cache again and reboot system.. it should work.. hopefully..
device Atrix 4g AT&T (2.3.6)
i install rom ICS or JB from http://forum.xda-developers.com/forumdisplay.php?f=997
i can't boot it, sometime i can here sound boot in display not show anything.
my device root and unlock now
how i can fix it?
"That Rom"
"ICSRom 1.4"
update: this time i can boot it but device very lag
update 2 : i close device and open it's black display after logo motorola
thanks
gatxclub said:
device Atrix 4g AT&T
i install rom ICS or JB from http://forum.xda-developers.com/forumdisplay.php?f=997
i can't boot it, sometime i can here sound boot in display not show anything.
my device root and unlock now
how i can fix it?
update: this time i can boot it but device very lag
thanks
Click to expand...
Click to collapse
Can you please be a little more informative about whats happening? I don't get anything.
i install rom from link by CWM in bootloader
in bootloader install finish, after i reboot it have logo motorola about 10 sec. display it's dark don't show anything.
but i can open bootloader in open device
gatxclub said:
i install rom from link by CWM in bootloader
in bootloader install finish, after i reboot it have logo motorola about 10 sec. display it's dark don't show anything.
but i can open bootloader in open device
Click to expand...
Click to collapse
Did you try to do a factory wipe ? and format cache?
joelorona said:
Did you try to do a factory wipe ? and format cache?
Click to expand...
Click to collapse
i try it but not good
If you can boot the phone but it's laggy, did you install the ramfix? Seems from your English (no offense) that you are an international user so you probably need it.
you can get the flashable zip here: http://forum.xda-developers.com/showthread.php?t=1240310
thanks, i will try it!
update : i download auto ram fix and install http://forum.xda-developers.com/showthread.php?t=1930645 my device can't boot to os, it can boot in motorola logo only and auto reboot
how did you install the rom if I may ask? did you format/wipe your system/data/cacha/dalvik cache?
else if you have a bootloop problem a possible answer given by upndwn4par is to pull out the battery, press volume down while placing the battery again and navigate to android recovery. Then reflash your rom (i would recommend first formatting the partitions mentioned first), and then flash the ramfix (don't forget this step).
Hi,
My device : Atrix 4G (AT&T)
i install rom with recovery mode (ClockworkMod 5.0.2.0)
i try to install "ThatRom" and ICSROM 1.4
- First i wipe Dalvik Cache in advance menu
- i install fixrom from ext-sdcard
- i install "ThatRom" from ext-sdcard
- Format wipe date/factory
- Reboot
result ICSROM 1.4 : it auto reboot in motorola logo in phase open device
result ThatRom : after boot device have logo motorola, logo fade out have sound and Screen off. + 3-4 min have sound boot and loop
how i can fix it.
This time i use rom CM. 9.0 for atrix but i don't like it because it's not have webtop
thanks
I first did a format cache/data/system in mounts and storage
then in advanced dalvik cache, afterwards installed the rom from ext-sd, flashed ramfix and rebooted.
worked fine for me but remember that it can take some time the first time (seems you know this but nevertheless), so maybe you could try it in that order?
else you can try the method for pulling battery (or do it immediatly, maybe it'll help)
This time i can install "That Rom".
in first boot it's use time to boot around 30 min. and i setup device and reboot.
second time to boot device i can't come in to os i here sound boot and my battery's hot.
So after first i can't boot to os.
how i can fix it's
thanks
update : i try to reinstall thatRom it's can't boot to os
Have you tried AtrICS rom? It's a newer release and has less bugs to my opinion.
You do know that webtop does not work with lapdock in these builds? and that battery life is terrible (if you don't get the screen glitches and random reboots)?
I think for now you could be better of with a GB build since these are not really daily driver compatible and perhaps not yet worth the hassle.
If you really want to, you can try installing AtrICS but hot battery etc etc are part of the rom and wont be solved without kernel sources.
yes, this time i try AtrlCS rom i can't boot too.
sometime i will use 2.3.6 only T_T
Was flashing my friends i9305 and now it wont boot any rom I flash... always gets stuck on the first boot screen until I take out battery.
I flashed CWM 6.0.4.7 using odin.
I have tried flashing several roms (CM 11, CM 10.1, PACman 4.3)... Each one will flash with no errors, then when I reboot after correct GAPPS it just gets stuck on the loading screen forever and won't boot up into ROM.
Wipe data/cache, wipe dalvik, wipe system > Install rom from zip, install GAPPS from zip > reboot (even here I wipe system/data/cache - still doesnt work).
Any ideas on why it won't load up the roms....
only4dank said:
Was flashing my friends i9305 and now it wont boot any rom I flash... always gets stuck on the first boot screen until I take out battery.
I flashed CWM 6.0.4.7 using odin.
I have tried flashing several roms (CM 11, CM 10.1, PACman 4.3)... Each one will flash with no errors, then when I reboot after correct GAPPS it just gets stuck on the loading screen forever and won't boot up into ROM.
Wipe data/cache, wipe dalvik, wipe system > Install rom from zip, install GAPPS from zip > reboot (even here I wipe system/data/cache - still doesnt work).
Any ideas on why it won't load up the roms....
Click to expand...
Click to collapse
Did you flash a 19305 rom this is 19300 forum?
Wrong forum, report your own post and ask a moderator to move it to the i9305 q&a forum -anything here could brick it.
I resently installed cynogen mode 12-20150315-NIGHTLY-nicki in xperia m c1904 which wont boot up .
I flashed the boot with the boot.img file then on the boot up kept pressing the volum down key
and came to the cynogen recovery and i cleared the cache and did a factory restore and
installed the cm from my sd card but after installation i choose reboot system now and
but cm didnt boot up insted it kept on showing sony then the display went off
and agin came back to cyanogen recovery
:crying:
need help pls..
Razvin said:
I resently installed cynogen mode 12-20150315-NIGHTLY-nicki in xperia m c1904 which wont boot up .
I flashed the boot with the boot.img file then on the boot up kept pressing the volum down key
and came to the cynogen recovery and i cleared the cache and did a factory restore and
installed the cm from my sd card but after installation i choose reboot system now and
but cm didnt boot up insted it kept on showing sony then the display went off
and agin came back to cyanogen recovery
:crying:
need help pls..
Click to expand...
Click to collapse
Had you make a full wipe? (system, data, dalvik)
Not only factory restore.