Hi,
I got my sprint touch pro flashed to metro pcs, then I flashed it to mighty rom 6, and it was working all good for a long while. After I saw all these new roms coming out, with newer manila I decided to flash a new rom, and I read that it is better if I flash the stock rom before flashing to a custom rom, and so I did. After I flashed to the stock shipped sprint rom the phone stopped working, and after I flashed the custom rom, nfsfans B14 rom, the phone still doesn't work (I can't call or receive calls). I have installed the carrier cab for metro pcs, but it doesn't work, and anyways, as far as I know it only takes care of the internet, right?
Did I break the phone, or can I do something in service mode? Do I need to get it flashed again?
Please, any help would be greatly appreciated.
Thank You!
In case somebody would fall into the same situation, I had to get Metro PCS' PRL file which I had to update in ##778# settings, and now it all works fine
Hey guys, i have searched plenty of threads with no fix in sight. I was running stock J12 and flashed Frankin-Twiz Final. Flash went fine, but i have no data connection through Tmobile (3g or Edge). My apn is epc.tmobile.com and it is selected. Everything looks fine. I odin'd back to stock, flashed Bionix's newest and the same thing.
The thing that is weird is that flashing back to stock fixes the data connection, 3g and EDGE show up like they should. Any help would be much appreciated. Thanks in advance.
hey wats up.. i have a metro flashed eris running 2.1 and its rooted everything works good.. but i want to update to the 2.2 thats out for the eris.
if i do the update will it mess up the Metro Flash..
I just did the same thing. MOST Roms will not adjust any Metro Flash settings. Talk/Text should work after a fresh Rom.
However, be aware of any OTA Sense Roms and FlashBack Roms. They WILL revert your phone back to Verizon settings. I made this mistake twice.
--EDIT--
I would also recommend downloading APN Backup/Restore from the market, and backing up your current APN settings before flashing a new 2.2 ROM just in case your settings get wiped.
thanks i did the update and its great only thing now is that my mms dont work internet works great..
Hi All,
Just reactivated my Vibrant on a TMo prepaid plan (don't know if that's relevant). I had it on Froyo when I activated it and it worked fine.
Of course the first thing I wanted to do was root/rom it, so I used Odin to flash back to Eclair in order to get ICS going. Ran through a tutorial by DJ Eddie to get it rooted, gingerbread installed and then ICS Passion. Everything worked fine except I had no mobile network. I tried messing with APN stuff but could never connect. I tried flashing other modems (KB5, KA7?) to no avail..
Since then I've tried going to just gingerbread - no radio, I've tried ExRom, no radio - I attempted Slim Bean but the update failed so I turned to here.
There are a couple posts takling about restoring backup /ecf partitions but I am not Android inclined enough to get that going. I just find it weird that I haven't been able to use anything but Froyo and Eclair and have an active radio.
I apologize if this convoluted situation is simply answered elsewhere, I've tried searching through forums and other sites and can't find a clear run down of the issue and a resolution. If anyone has any advice aside from sticking with Eclair or Froyo I'd really appreciate your input.
Thanks!
I'm a new member here, I have done extensive search on this issue and have not found a solution yet.
My phone is Droid Razr Maxx XT912 that was flashed to PagePlus 3G months ago. I used a thread on Howard Forums that details the process for flashing various Droids to PP 3G.
It worked great, no problems. Last week I installed CyanogenMod 11 and it still worked good. Yesterday my PP LTE SIM arrived and I began the process of getting it to work on 4G. Settings in Mobile Network Settings are as follows: CDMA Subscription is set to RUIM/SIM, and Preferred Network Mode is set to Global(CDMA/EvDo/LTE/GSM/WCDMA. I tried a few of the modes, with same results.
The issue is that LTE works great, but I have no voice or SMS. MMS works fine. I have been back and forth with PP support, they programmed it for 4G and they say everything is correct on their end, which it probably is.
Is there an obvious setting I'm missing here? Again it is running CM11 with SafeStrap. Installing CM would have fully erased the 3G flash and settings, is that correct?
Thank you!
dsldrvr said:
I'm a new member here, I have done extensive search on this issue and have not found a solution yet.
My phone is Droid Razr Maxx XT912 that was flashed to PagePlus 3G months ago. I used a thread on Howard Forums that details the process for flashing various Droids to PP 3G.
It worked great, no problems. Last week I installed CyanogenMod 11 and it still worked good. Yesterday my PP LTE SIM arrived and I began the process of getting it to work on 4G. Settings in Mobile Network Settings are as follows: CDMA Subscription is set to RUIM/SIM, and Preferred Network Mode is set to Global(CDMA/EvDo/LTE/GSM/WCDMA. I tried a few of the modes, with same results.
The issue is that LTE works great, but I have no voice or SMS. MMS works fine. I have been back and forth with PP support, they programmed it for 4G and they say everything is correct on their end, which it probably is.
Is there an obvious setting I'm missing here? Again it is running CM11 with SafeStrap. Installing CM would have fully erased the 3G flash and settings, is that correct?
Thank you!
Click to expand...
Click to collapse
Installing CM has nothing to do with the flash, I think your best bet for it to work is to uninstall everything including safestrap, boot into fastboot, and RSD It to this: http://rootzwiki.com/topic/13566-how-to-droid-razr-return-to-stock/ This is the only known way to restore the 3g settings you flashed the onto the device. Make sure you download this update: http://sbf.droid-developers.org/download.php?device=9&file=156 and not the Blur_Version.98.72.165.XT912.Verizon.en.US update, because the latter has no way of rooting it. Sadly, the only way to get your phone to work is to wipe it completely. Good luck!:good:
Thanks for the reply. I decided to try that about an hour ago, figured out how to uninstall safestrap, then used RDS Lite to flash the stock ROM (it was the same one you linked to). Now voice, sms, and 4G data are working flawlessly. The only drawback is that I'm back to the unrooted stock ROM. If I would install CM11 now, should it stay working or was there an issue with CM? I am assuming the 3G flash had affected files that are not part of the ROM?
dsldrvr said:
Thanks for the reply. I decided to try that about an hour ago, figured out how to uninstall safestrap, then used RDS Lite to flash the stock ROM (it was the same one you linked to). Now voice, sms, and 4G data are working flawlessly. The only drawback is that I'm back to the unrooted stock ROM. If I would install CM11 now, should it stay working or was there an issue with CM? I am assuming the 3G flash had affected files that are not part of the ROM?
Click to expand...
Click to collapse
CyanogenMod ROM has nothing to do with the service. You should be fine installing CM. If you need a root tool, use this: http://forum.xda-developers.com/droid-razr/development/droid-razr-utility-xt913-jellybean-t2861798 and install safestrap, and then install the ROM of your choice. It doesn't matter if it is Stock Slot or Slot 1 etc., it should work fine.:good:
It was just the leftovers of the previous 3G flash that caused the original problems.
I got my PagePlus 3G flashed XT912 onto PP 4G LTE with no problems by flashing the phone back to stock with RSD Lite and the .165 update. I then (after activating the LTE sim with PP) rooted, installed Safestrap, and installed Axxionkat. The one thing to check on any rom is in Settings>Data>Network>CDMA+LTE/EvDo.
http://www.howardforums.com/showthr...viously-Flashed-Droid-Razr-XT912-On-PP-4G-LTE