[Q] novice help advise please - Android Q&A, Help & Troubleshooting

i purchased this phone and was delighted with it until my wife pressed factory reset and now when switching on i get a blank screen, i can connect it through the usb cable and get it in download settings but do not know what to do after that, can you advise or direct me to the page for me to follow to restore this back to the original settings all advise will be truly greatfull, i have on the pc stock recovery/root with restore/odin/samsung updates/cwm-root-b92m, do i use any/all of these programs to restore?
Model
HDC i9300 s3
dual SIM Cards dual standby
Unlocked 2G GSM 800/850/1800/1900MHz
3G:WCDMA/HSUPA 850/2100MHz
Processor(CPU)
MTK 6577 1GHz Cortex A9 + SGX531 GPU
Android 4.1.1 ICS
RAM
512MB
ROM
4GB ( Support TF Card up to 32GB)
Screen
4.8 inch Touch Screen Resolution: HD AMOLED, 854x480Pixels, 1600K Colors

Sounds like the device may have been rooted? If so it may be soft bricked. Are you aware if this was rooted / unlocked?
Sent from my Nexus 4 using xda premium

mellowdev said:
Sounds like the device may have been rooted? If so it may be soft bricked. Are you aware if this was rooted / unlocked?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
thank you for your help, yes it was rooted when i got it, and unlocked if you mean it can accept any sim? sorry for knowing very little

ollie1 said:
thank you for your help, yes it was rooted when i got it, and unlocked if you mean it can accept any sim? sorry for knowing very little
Click to expand...
Click to collapse
been reading how to unbrick MTK65** will this ok to use for my phone or will it make it worse, i really need to get advice how to get this working again, the more i read the more confused i get between bricked and semi bricked and what i need install a rom? can you please help me

ollie1 said:
been reading how to unbrick MTK65** will this ok to use for my phone or will it make it worse, i really need to get advice how to get this working again, the more i read the more confused i get between bricked and semi bricked and what i need install a rom? can you please help me
Click to expand...
Click to collapse
The basic thing you need is CWM
Using XDA premium through A5

coolprateek.kumar said:
The basic thing you need is CWM
Using XDA premium through A5
Click to expand...
Click to collapse
thank you very much for your advice, i will get started when i get home and will let you know how i get on:good:

ollie1 said:
thank you very much for your advice, i will get started when i get home and will let you know how i get on:good:
Click to expand...
Click to collapse
sorry but i need more advice please, i have been onto the cwm site and found samsung galaxy s3 (GT-I9300) rom, is this the one i will use?

ollie1 said:
sorry but i need more advice please, i have been onto the cwm site and found samsung galaxy s3 (GT-I9300) rom, is this the one i will use?
Click to expand...
Click to collapse
Download the rom but it's the 2nd thing....1st install CWM, it's a custom recovery like one when you press power button + vol. up + home when your device is off.
It enables you to backup your current rom if something should go wrong
Using XDA premium through A5

coolprateek.kumar said:
Download the rom but it's the 2nd thing....1st install CWM, it's a custom recovery like one when you press power button + vol. up + home when your device is off.
It enables you to backup your current rom if something should go wrong
Using XDA premium through A5
Click to expand...
Click to collapse
as i have explained "i know nothing?" i googled CWM site and did not find the rom for this phone, could you please show me which pages to read and learn, also which bits to install for pc and phone, i am very greatfull for all your advice and help, all i keep reading on this forum is if you install the wrong things you will brick your phone, and as explained this is soft/semi bricked. all i want at the moment is to get the phone working again then when i learn about phones and software, i will try more.
Playing about with the phone i seen /emmc/clockworkmod/backup/2010-01.04.00.54
is this the rom? and can i restore the phone with this and if so how do i restore PLEASE. i am now bald by pulling out my hair

You are welcome to try Mango Tools out. search for it on the thread (for instructions) or download from my site mellowdev.net
PM me for more help
Sent from my Nexus 4 using xda premium

mellowdev said:
You are welcome to try Mango Tools out. search for it on the thread (for instructions) or download from my site mellowdev.net
PM me for more help
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
thank you very much, i will give this a try

Related

[Q] Question about brick ?

i have a question for you guys what i have not
do for to get a cell phone brick ?
i have read many threads and the only way for to get it is by using application rom manager thats right or i can get a brick cell phone in odin software.
what if by a mistake set files in a wrong order in odin software
galaxy ace cf gingerreal v1.0 kph
thanks in advance
WHY would you put the wrong files in ODIN, just read the tutorial and follow it correctly?
And to kinda answer the question, what've read is that ODIN will not brick you phone, you might be able to get a bootloop though (just reflash and it should work fine).
Read the newbie guide(sticky thread) about Rom manager, it should be supported now but be cautious, better to use CWM app instead, or just reboot your phone to CWM (dont be lazy).
People brick their phone when unlocking their phone, there should be a proper solution that works without having to brick you phone.
QNBT said:
WHY would you put the wrong files in ODIN, just read the tutorial and follow it correctly?
And to kinda answer the question, what've read is that ODIN will not brick you phone, you might be able to get a bootloop though (just reflash and it should work fine).
Read the newbie guide(sticky thread) about Rom manager, it should be supported now but be cautious, better to use CWM app instead, or just reboot your phone to CWM (dont be lazy).
People brick their phone when unlocking their phone, there should be a proper solution that works without having to brick you phone.
Click to expand...
Click to collapse
thanks a lot i just want to share this information with some people and solve many questions
squallo37 said:
i have a question for you guys what i have not
do for to get a cell phone brick ?
i have read many threads and the only way for to get it is by using application rom manager thats right or i can get a brick cell phone in odin software.
what if by a mistake set files in a wrong order in odin software
galaxy ace cf gingerreal v1.0 kph
thanks in advance
Click to expand...
Click to collapse
Ace break by rom manager
not know about odin if choose wrong files in wrong option as not tried yet but if i'm not wrong if you choose wrong files md5 sum not gonna correct so it shows error and not let you to flash if you choose wrong option
nims11 said:
Ace break by rom manager
Click to expand...
Click to collapse
I don't know about you , it works fine for me
Forever living in my Galaxy Ace using XDA App
Samsung S5830 brick problem
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
nolex90 said:
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
Click to expand...
Click to collapse
I give up because the stickied post on this section was stuck for nothing .
I told you to practice caution , why didn't you listen ?
Forever living in my Galaxy Ace using XDA App
EmoBoiix3 said:
I give up because the stickied post on this section was stuck for nothing .
I told you to practice caution , why didn't you listen ?
Click to expand...
Click to collapse
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
EmoBoiix3 said:
I don't know about you , it works fine for me
Forever living in my Galaxy Ace using XDA App
Click to expand...
Click to collapse
What it works????
I already beicked my phone in two week after buy cause that crap app
i not think it work on your phone well
may be its now supported or something thats why you use
im happy with cwm app
---------- Post added at 10:56 AM ---------- Previous post was at 10:54 AM ----------
nolex90 said:
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
Click to expand...
Click to collapse
Go to samsung service centre
nolex90 said:
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
Click to expand...
Click to collapse
Try a different kohm ?
Forever living in my Galaxy Ace using XDA App
nolex90 said:
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
Click to expand...
Click to collapse
Only way to get it fixed is by changing the mother board..experienced the same a few months ago..
Sent from my GT-S5830 using Tapatalk
I m also using galaxy ace but nothing seems to me like that, it is working properly for me.

[Q] Flashing failed

My luck is very bad. I failed to flash my 9100, and now I can not turn on my phone. No matter I press on which keys, the screen keeps black. And I connect it to my computer bu it can not be detected. I have tried the Counter Reset Patch to go to downloading mode, but failed. So what should I do now? If I sent it back to Samsung Service , how much will they charge me? Or If I can fix it by myself ? Who can help me? Thanks very much..
First, your luck isn't very bad, computers don't have luck, if you've bricked your device it's because you've messed something up not because you're unlucky.
Second, what exactly did you do to flash your phone? You haven't given anywhere near enough information for anyone to help you hence the lack of replies.
postfatal said:
First, your luck isn't very bad, computers don't have luck, if you've bricked your device it's because you've messed something up not because you're unlucky.
Second, what exactly did you do to flash your phone? You haven't given anywhere near enough information for anyone to help you hence the lack of replies.
Click to expand...
Click to collapse
Thank you very much. U are right, I bricked my phone by my careless. I was restoring my phone to a previous system,then it got stuck in the recovery. I waited for a long time finally I have to take out the battery. Then it bricked.
djjandy said:
Thank you very much. U are right, I bricked my phone by my careless. I was restoring my phone to a previous system,then it got stuck in the recovery. I waited for a long time finally I have to take out the battery. Then it bricked.
Click to expand...
Click to collapse
Omg that really happens? I am using Samsung galaxy wonder. Does that happen to many of you guys?
Sent from my GT-I8150 using xda app-developers app
Brian_SGW_CM9 said:
Omg that really happens? I am using Samsung galaxy wonder. Does that happen to many of you guys?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
As far as I know I am the first. U know under almost all conditions u can fix it by downloading mode , but now I can not enter that mode. So I am unlucky.
1 tip
Try charging the battery using another mobile or external battery charger.Then connect. By my experience usb drivers of android dont easily get damaged or lost until u ruin the rom heart and soul.
djjandy said:
My luck is very bad. I failed to flash my 9100, and now I can not turn on my phone. No matter I press on which keys, the screen keeps black. And I connect it to my computer bu it can not be detected. I have tried the Counter Reset Patch to go to downloading mode, but failed. So what should I do now? If I sent it back to Samsung Service , how much will they charge me? Or If I can fix it by myself ? Who can help me? Thanks very much..
Click to expand...
Click to collapse
What did you actually flash? Firmware, Kernel or are you trying to Root your phone?
If you can go to Download Mode then flash Stock Firmware. To be safe, charge battery to at least 70% before flashing via Odin3 v1.85. Provide more details so it would be easier for others to help....cheers
djjandy said:
As far as I know I am the first. U know under almost all conditions u can fix it by downloading mode , but now I can not enter that mode. So I am unlucky.
Click to expand...
Click to collapse
My friend told me he couldn't turn on too. He said he was flashing a custom rom with cwm. He uses s2 . He had the same situation as u did
Sent from my GT-I8150 using xda app-developers app
You can bring it back to life
Flash it with official firmware that's
It !!
Official Samsung firmwares :-
www.samfirmware.com
Sent from my Samsung Wave GT-S8500 (ICS 4.0.4) using xda premium
badboys8908 said:
What did you actually flash? Firmware, Kernel or are you trying to Root your phone?
If you can go to Download Mode then flash Stock Firmware. To be safe, charge battery to at least 70% before flashing via Odin3 v1.85. Provide more details so it would be easier for others to help....cheers
Click to expand...
Click to collapse
Exactly I flash a new rom, but the rom is not good then I tried to restore my previous rom which I backed up before. While restoring, it stuck. I took out the battery. I can not enter downloading mode now so it is a big problem.
danishprakash said:
You can bring it back to life
Flash it with official firmware that's
It !!
Sent from my Samsung Wave GT-S8500 (ICS 4.0.4) using xda premium
Click to expand...
Click to collapse
Thank you very much, But I can not enter downloading mode now.:crying:
Anindya JV said:
Try charging the battery using another mobile or external battery charger.Then connect. By my experience usb drivers of android dont easily get damaged or lost until u ruin the rom heart and soul.
Click to expand...
Click to collapse
I have charged the battery to full by external charger. I think I ruin the heart.:crying:
Brian_SGW_CM9 said:
My friend told me he couldn't turn on too. He said he was flashing a custom rom with cwm. He uses s2 . He had the same situation as u did
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
What did he do then? Does he fix it ?
djjandy said:
What did he do then? Does he fix it ?
Click to expand...
Click to collapse
He said: everything's fine again. I can ask him for help if u want. I will answer u tomorrow
Sent from my GT-I8150 using xda app-developers app
USB Jig will not get you into download mode either?
Warning:If you flash any ROM built on the leaked Samsung 4.0.4 ROM don't use recovery
:crying: I hope you did not flash a ROM based on the leaked Samsung 4.0.4 and attempt recovery. If that is what you did then your phone is really bricked!!
Brian_SGW_CM9 said:
He said: everything's fine again. I can ask him for help if u want. I will answer u tomorrow
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much.
rapatu2010 said:
:crying: I hope you did not flash a ROM based on the leaked Samsung 4.0.4 and attempt recovery. If that is what you did then your phone is really bricked!!
Click to expand...
Click to collapse
That is what I did. The last method is sent it back to Samsung ? How much should I pay for it?
djjandy said:
That is what I did. The last method is sent it back to Samsung ? How much should I pay for it?
Click to expand...
Click to collapse
Did you just flash the "Leaked - 4.0.4 I9100XXLQ5..???
If Yes then the only solution is Samsung Service Centre.
Read this:
http://forum.xda-developers.com/showthread.php?t=1756242
This leaked firmware had cause a lots of Hard Brick to other user not only you.

Bricked after factory reset, I can't even see CWM. Help!

So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
alainalemany said:
So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
Click to expand...
Click to collapse
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
kilometers4 said:
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
Click to expand...
Click to collapse
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
I've had that problem already. Check the thread link below and get the stock firmware for your device and flash it with Odin.
http://www.google.tt/url?sa=t&sourc...s4GAAw&usg=AFQjCNGy84IPLFxF4qAfKfMxdPjNS5m4-A
Sent from my GT-I9100 using Tapatalk 2
alainalemany said:
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
Click to expand...
Click to collapse
Yea looks good, just looked at it quickly and it seems right.
kilometers4 said:
Yea looks good, just looked at it quickly and it seems right.
Click to expand...
Click to collapse
OK thanks dude... downloading.
cannot flash with odin
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
mark.r22 said:
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
Click to expand...
Click to collapse
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
yes i closed kies via the task manager and checked that all drivers were installed
kilometers4 said:
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
help sgs2 no display
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
yarzaea said:
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
Click to expand...
Click to collapse
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flashing another kernel like siyah might help you.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
If you don't want to flash a stock ROM, root, and flash a custom ROM again, you can use one of odin flashable files for custom kernels, not all have one but you can check (Dorimanx for example)
xDa_nightfury said:
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
yarzaea said:
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
Click to expand...
Click to collapse
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
ramnex said:
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
Click to expand...
Click to collapse
i really wanted to try a jtag but dunno where in the philippines perform such procedure? tho, been thinking of bringing my s2 to samsung and have it estimated since it is no longer covered by warranty...but, this is the philippines, there are no such thing as coming in clean, they will try to bleed you for that precious sg2...tnx alot for your prompt reply and more power!

[Q] Phone Bricked? Please help...!

Hello guys,
I've installed "NoFrills" CPU Control on my LG E720 on 3/4/13, and it worked quite well on that day.
But when I tried to turn on the phone on 4/4 , it just stuck in the "android icon screen" ( it must be boot-looping :angel: )
What's happening? Can I slove the problem without losing all the user data ?
Thanks for your help! :laugh:
(*I've moved the app to SD by using "Droidsail Super App2SD")
( sorry for my bad English )
Try flashing another rom through Recovery if not then revert back to stock rom.
-Rik[Rittik]
Rittik said:
Try flashing another rom through Recovery if not then revert back to stock rom.
-Rik[Rittik]
Click to expand...
Click to collapse
so in that case, will i be able to save my user data, or extract them from the phone to my pc?
Also, are there any tutorials about ‘flashing rom’, as i know little about it...
Many thanks :laugh:
There's a dedicated thread for help on bricked phones please post there a don't create a mess in the forum
Sent from my GT-S5302 using Tapatalk 2
Hit Thanx Button if i helped you!
win173d said:
so in that case, will i be able to save my user data, or extract them from the phone to my pc?
Also, are there any tutorials about ‘flashing rom’, as i know little about it...
Many thanks :laugh:
Click to expand...
Click to collapse
If you hadnt backed up before. then my answer will be No. And depending on your device if the device has a dedicated Forum on XDA you will get more help there in terms of flashing Stock roms as All Manufacturers have different methods to do so. if there isnt i am sorry to tell you should go to service centre.

can i upgrade my samsung i9100 up to 4.1.2 version?

hello Experts
now i use samsung i9100. running 4.1.2 . but want to upgrade 4.2/4.3?
it possible if yes what i should do?
please experts guide me.
Read lots. Plenty of guides here.
FYI the latest Samsung ROM is 4.1.2 so later versions are unofficial.
Sent from my GT-I9100 using XDA Premium 4 mobile app
MarkyG82 said:
Read lots. Plenty of guides here.
FYI the latest Samsung ROM is 4.1.2 so later versions are unofficial.
Sent from my GT-I9100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
so how to do unoffcial please give me guide via recovery mode.coz i read via pc difficult. i am not expert on pc.
which file are used (custom)?
sattar_00977 said:
so how to do unoffcial please give me guide via recovery mode.coz i read via pc difficult. i am not expert on pc.
which file are used (custom)?
Click to expand...
Click to collapse
No man, this ain't going to work like this. Nothing personal, but you can't be this lazy and ask for guides that are quite hard to miss on xda. Use search, and learn for yourself.
If you can't understand them, reconsider if you really want to start rooting and flashing.
I am not really an expert but flash phillz cwm6 in stock kernel and only flash that file don't !press format or wipe data factoryreset.
Now you are rooted/custom recovery.
next step is to look in the android development forum and download a ROM. Also download gapps from goo.im/gapps now copy them to external or internalsd.
Reboot to recovery and do factory reset
Now go to mounts and format system.
Now install zip the ROM and gapps reboot and youre done!
If you are stuck on boot screen or can't enter recovery then use Odin and download an kernel like siyah and flash it in Odin.
You can enter recovery by
volume up +home+power If the samsung screen show after3seconds release the power button but hold home and volume up.
You can enter download mode by volume down+home+power you also need to download Odin.1.85 and USB drivers hope this could help you and other people
Sent from my GT-I9100 using xda app-developers app
First of all: very nice of you to tell OP this all, seriously. But what about this explanation is different from the guides? This could all be found with a simple search. In that case people don't have ask the same question all the time, and they make sure they understand what they're doing, instead of maybe bricking their phones..
true but if some op's dont knoe exactly what to search i want to help. got my s2 now for 2weeks or what and its completely different from my unbrickable lg optimus 2x
but i hope that my kind of guide which i made from my own information i know now could help somebody if its easy to read cause i typed it on my phone
Sent from my GT-I9100 using xda app-developers app

Categories

Resources