[Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
I was flashing the original unrooted TouchWiz ROM back to my phone, but accidentally put it in the "Phone" instead of "PDA" slot. Now the phone only says "Firmware update failed" and in Odin flashing a ROM to PDA also fails.
So I need a "Phone" ROM for the SCH-i605. Where can I get this? Please help. Thank you.
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Weres it falling in Odin now? What step or error messages. If it's sboot you need the alternate restore root66 file.
Sent from the dark on a Note 2
kintwofan said:
Weres it falling in Odin now? What step or error messages. If it's sboot you need the alternate restore root66 file.
Sent from the dark on a Note 2
Click to expand...
Click to collapse
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> param.bin
<ID:0/003> recovery.img
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Keavon said:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> param.bin
<ID:0/003> recovery.img
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Did you unlock your bootloader, and is it that new one that recently came out?
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Use the alternate restore from here
http://forum.xda-developers.com/showthread.php?p=35265728
I'm gonna bet you are on the latest ota with a locked boot loader. Which is why it's failing at sboot
Sent from the dark on a Note 2
kintwofan said:
Use the alternate restore from here
http://forum.xda-developers.com/showthread.php?p=35265728
I'm gonna bet you are on the latest ota with a locked boot loader. Which is why it's failing at sboot
Sent from the dark on a Note 2
Click to expand...
Click to collapse
I am using a locked bootloader, and the last ROM I had installed was the official original ROM from Samsung. My next step was to unlock the bootloader, but this happened first...
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Keavon said:
I am using a locked bootloader, and the last ROM I had installed was the official original ROM from Samsung. My next step was to unlock the bootloader, but this happened first...
Click to expand...
Click to collapse
So do what I just said and you should be good
Sent from the dark on a Note 2
kintwofan said:
So do what I just said and you should be good
Sent from the dark on a Note 2
Click to expand...
Click to collapse
The file I am flashing to 'PDA' is the one from that post, but it fails. Don't I need to flash something onto 'Phone'? Also what is 'Phone'?
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Keavon said:
The file I am flashing to 'PDA' is the one from that post, but it fails. Don't I need to flash something onto 'Phone'? Also what is 'Phone'?
Click to expand...
Click to collapse
Your not flashing the alternate restore file I linked or it would not be writing sboot
Sent from the dark on a Note 2
kintwofan said:
Your not flashing the alternate restore file I linked or it would not be writing sboot
Sent from the dark on a Note 2
Click to expand...
Click to collapse
I just redownloaded that file from http://forum.xda-developers.com/showthread.php?p=35265728 (one one that says Download Me and not Mirror 1 or 2) and it still fails at sboot.bin
Edit: I'm an idiot. I read your post wrong. I thought you meant that the link was an alternate way to restore, not to use the file called Alternate Restore. I'll go download that now.
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Keavon said:
I just redownloaded that file from http://forum.xda-developers.com/showthread.php?p=35265728 (one one that says Download Me and not Mirror 1 or 2) and it still fails at sboot.bin
Click to expand...
Click to collapse
I'll say it one more time... DOWNLOAD "ALTERNATE RESTORE" is in blue below the mirror 1 and mirror 2. It does not have sboot in it
I'll make it easy here is the link
http://www.androidfilehost.com/?fid=9390225151984927096
Sent from the dark on a Note 2
kintwofan said:
I'll say it one more time... DOWNLOAD "ALTERNATE RESTORE" is in blue below the mirror 1 and mirror 2. It does not have sboot in it
I'll make it easy here is the link
http://www.androidfilehost.com/?fid=9390225151984927096
Sent from the dark on a Note 2
Click to expand...
Click to collapse
Yeah, I apologize for that. I noticed it right after I posted my reply, but had to wait five minutes before it let me post my update, in which time you had already responded. As my edit says, I misinterpreted what you had said. 2/3 done downloading it now.
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Keavon said:
Yeah, I apologize for that. I noticed it right after I posted my reply, but had to wait five minutes before it let me post my update, in which time you had already responded. As my edit says, I misinterpreted what you had said. 2/3 done downloading it now.
Click to expand...
Click to collapse
Ya I saw that. Let's hope it at least gets you booting. I think you'll be good.
Sent from the dark on a Note 2
Oh great, the download died literally on the last megabyte. It said disconnected from the server, and I couldn't get it to reconnect...
So now it's time to re-download the ENTIRE file for the last piece of the very last megabyte...
Okay, I flashed it and it's all working. Do I still need to unlock the bootloader, or did that ROM do it for me?
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Keavon said:
Okay, I flashed it and it's all working. Do I still need to unlock the bootloader, or did that ROM do it for me?
Click to expand...
Click to collapse
You do need to unlock the boot loader still
Sent from the dark on a Note 2
Okay, following this guide: http://galaxynote2root.com/galaxy-note-2-tutorials/how-to-unlock-bootloader-on-verizon-galaxy-note-2-sch-i605/
At step 8 it flashes, but fails, still at sboot.bin.
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> tz.img
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Re: [Q] Accidentally Flashed to "Phone" Instead of "PDA" in Odin - Bricked
Keavon said:
Okay, following this guide: http://galaxynote2root.com/galaxy-n...bootloader-on-verizon-galaxy-note-2-sch-i605/
At step 8 it flashes, but fails, still at sboot.bin.
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> tz.img
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Well that's because they method doesn't work on the new ota. Quick tip don't use outside sources that just repost xda work. Get it from the source.... This is the ota method
http://forum.xda-developers.com/showthread.php?p=37195287
Sent from the dark on a Note 2
Okay, thank you so much for everything. I got it all running with the unlocked bootloader, and now I'm running CyanogenMod! I guess it didn't hurt anything to flash to Phone.
Related
I need that file to fix my phone and Adrynaly's web host went down. If someone could p2p or rehost this for me it would be greatly apperciated... Merry Christmas.
Try here
http://forum.xda-developers.com/archive/index.php/t-867648.html
Swyped from a black hole in a galaxy far far away, using the XDA app.
http://dl.dropbox.com/u/15289892/DI01package3.tar
justin94 said:
Try here
http://forum.xda-developers.com/archive/index.php/t-867648.html
Swyped from a black hole in a galaxy far far away, using the XDA app.
Click to expand...
Click to collapse
Yeah, that's what I need but it's down.
Im trying to get a mirror but so far its slow going.
DI01
I am trying to flash my phone back to stock and have downloaded this DI01 from other sites. when I try to use ODIN it gives me an "INVALID IMAGE TYPE" error message. my phone is on the yellow downloading screen. PLEASE HELP!
please do not be mad if I am posting this on the wrong thread. I am a noob and thus do not know better
I too am trying to flash back to stock.
Ive DL'd DI01package3.tar.md5...
Connected to Odin
But when I click start, I get the following messages
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Ive tried it a number of times, but no luck
the phone is now dead
can anyone help
I had a similar problem to you, with the package3 file; try the files linked to here:
http://forum.xda-developers.com/showpost.php?p=10711126&postcount=315
Namely, try flashing the Stock-i500-VZW-System.tar.md5 file via ODIN's PDA.
Follow the instructions on the first page of that thread; it should get you to a stock (as far as I can tell, anyway) DI01.
rushfanx1 said:
I too am trying to flash back to stock.
Ive DL'd DI01package3.tar.md5...
Connected to Odin
But when I click start, I get the following messages
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Ive tried it a number of times, but no luck
the phone is now dead
can anyone help
Click to expand...
Click to collapse
mine gets this far have you got your to work
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> movinand.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
DI01package3.tar?????
Does anyone know if DI01package3.tar has been replaced with a newer file as I can not find a good link to download it.
Thank you
FrostBitten4x said:
Does anyone know if DI01package3.tar has been replaced with a newer file as I can not find a good link to download it.
Thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1526488
I know several of you guys will be loling at me here...
Everything was working fine until I tried to flash Siyah Siyah 4.1.5. I went into normal recovery mode (Not using Rom Manager) and used a kernel cleaning script then flashed the zip for Siyah. Rebooted and couldn't get past the AOKP loading screen. I tried using I777UCKH7 OCD With Root.exe but it wouldn't work. Everything else I've tried to flash has failed.
After doing some research I found out that my bootloaders may have been messed up with some previous crap I did. I can only get into download mode and it states Product Name: GT-i9100.
I tried to flash the I777UCKH7-CL503881-Full.exe but every attempt gets stuck on <ID:0/003> Sbl.bin.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I777UCKH7-REV02-home-low-CL503881.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
I tried using Odin 1.85 and I777UCKH7-REV02-home-low-CL503881.tar.md5 but still the same issue. Can't get past Sbl.bin.
I read in another post that I should flash the param.lfs file first and then use I777UCKH7-CL503881-Full but that doesn't work either. I just get stuck again.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
Ah you have I9100 bootloaders, when the hell did you manage to do that?
Sent from Team Pirate! Using Tapatalk 2
First thing I would try, go to the Download Repository and flash the sbl.bin only. If successful, then try the stock again. You may or may not need to flash the param.lfs separately as well.
AngelsNecropolis said:
I know several of you guys will be loling at me here...
Everything was working fine until I tried to flash Siyah Siyah 4.1.5. I went into normal recovery mode (Not using Rom Manager) and used a kernel cleaning script then flashed the zip for Siyah. Rebooted and couldn't get past the AOKP loading screen. I tried using I777UCKH7 OCD With Root.exe but it wouldn't work. Everything else I've tried to flash has failed.
After doing some research I found out that my bootloaders may have been messed up with some previous crap I did. I can only get into download mode and it states Product Name: GT-i9100.
I tried to flash the I777UCKH7-CL503881-Full.exe but every attempt gets stuck on <ID:0/003> Sbl.bin.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I777UCKH7-REV02-home-low-CL503881.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
I tried using Odin 1.85 and I777UCKH7-REV02-home-low-CL503881.tar.md5 but still the same issue. Can't get past Sbl.bin.
I read in another post that I should flash the param.lfs file first and then use I777UCKH7-CL503881-Full but that doesn't work either. I just get stuck again.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
Click to expand...
Click to collapse
I'm sorry, I really am laughing here :laugh:
jthatch12 said:
I'm sorry, I really am laughing here :laugh:
Click to expand...
Click to collapse
Do you need help?
Did you try flashing the sbl.bin?
creepyncrawly said:
First thing I would try, go to the Download Repository and flash the sbl.bin only. If successful, then try the stock again. You may or may not need to flash the param.lfs separately as well.
Click to expand...
Click to collapse
I did try flashing the sbl.bin only and Odin only gets stuck and doesn't proceed just like the previous attempts.
Nick281051 said:
Ah you have I9100 bootloaders, when the hell did you manage to do that?
Sent from Team Pirate! Using Tapatalk 2
Click to expand...
Click to collapse
I'm not entirely sure when this happened. Not recently at least.
I also went to Sammobile and downloaded the "Firmwares for SGH-I777 - USA (AT&T)" I777UCLE5 but it gets stuck.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I777UCLE5_I777ATTLE5_I777UCLE5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
Oh gawd... after the sammobile firmware failed I tried to use the I777UCKH7-REV02-home-low-CL503881.tar.md5 again and Odin finally completed something. Now I'm stuck in a boot loop but can at least boot. I'll try download mode again and see if the unbrick files will work this time.
OK. My phone rebooted successfully... crisis over. lol
I lol'd.
Glad you got it sorted... No more ROM manager for you!
Clay
Team Pirate
Sent from my Buttery Smooth PINK SGH-i777
Yeah... I'm on my GS3 now that I just got today. Rooted already so I'm preparing for those roms now. My gs2 will hopefully run without any hiccups for my gf. I appreciate all the support everyone provides here. =)
Sent from my Galaxy S II running AOKP Jellybean
Yes.
Sent from my SGH-I777 using Tapatalk 2
Wow.... Rom manager is cool...
Sent from my SAMSUNG-SGH-I897 using xda premium
Hello,
I have a Samsung galaxy s4 (sgh-m919), I rooted it using odin3. about 2 months later I decided to revert back to a unroot state. I followed galaxys4root.com tutorial to unroot. I downloaded the usb driver and downloaded the firmware,
I ran odin in admin mode and pluged in phone in download mode. I clicked pda and added my .tar.md5 file and clicked start. this is what I got .
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
don't know how to fix the problem!!!!!!!!!
Hello,
I have a Samsung galaxy s4 (sgh-m919), I rooted it using odin3. about 2 months later I decided to revert back to a unroot state. I followed galaxys4root.com tutorial to unroot. I downloaded the usb driver and downloaded the firmware,
I ran odin in admin mode and pluged in phone in download mode. I clicked pda and added my .tar.md5 file and clicked start. this is what I got .
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
don't know how to fix the problem!!!!!!!!!
Sent from my SGH-M919 using xda app-developers app
Problem fixed
richardlg1 said:
Hello,
I have a Samsung galaxy s4 (sgh-m919), I rooted it using odin3. about 2 months later I decided to revert back to a unroot state. I followed galaxys4root.com tutorial to unroot. I downloaded the usb driver and downloaded the firmware,
I ran odin in admin mode and pluged in phone in download mode. I clicked pda and added my .tar.md5 file and clicked start. this is what I got .
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
don't know how to fix the problem!!!!!!!!!
Sent from my SGH-M919 using xda app-developers app
Problem fixed
Click to expand...
Click to collapse
OMG YES IM HAVING THE SAME ISSUE i was able to get back into the os but i tried to root again and it didnt stick so im back in the soft brick SOMEONE PLEASE HELP
Bump! I would appreciate if someone would help with this issue, as I am also having the same problem.
Odin fails to flash even a stock rom.. please help.
skay301 said:
Bump! I would appreciate if someone would help with this issue, as I am also having the same problem.
Odin fails to flash even a stock rom.. please help.
Click to expand...
Click to collapse
bump. I am having the same issue. stuck in a soft brick with odin unable to successfully load stock or a custom rom. tried different PIT files. tried different roms, tried pushing via adb, tried on windows, osx, and Linux. im seriously gasping as straws here.
odin mode
product name: sgh-m919
current binary: samsung official
system status: custom
knox kernel lock: 0x0
knox warrenty void: 0x1
cso-config-lsb:0x30
write protection enabled:
emmc burst mode enabled
Click to expand...
Click to collapse
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
toosweetnitemare said:
bump. I am having the same issue. stuck in a soft brick with odin unable to successfully load stock or a custom rom. tried different PIT files. tried different roms, tried pushing via adb, tried on windows, osx, and Linux. im seriously gasping as straws here.
Click to expand...
Click to collapse
You need to create your own thread and describe in detail :
Can you get to Download Mode?
Can you get into Recovery? If so, custom (version>) or stock?
What version of the software / firmware WERE you on?
What did you do to cause it to soft brick?
What versions of the software / firmware have you tried?
Why were you trying different PIT files??
What errors are you having?
es0tericcha0s said:
You need to create your own thread and describe in detail :
Click to expand...
Click to collapse
Thanks in advance for the help!
Can you get to Download Mode?
yes
Can you get into Recovery? If so, custom (version>) or stock?
yes. I just flashed twp on it.
What version of the software / firmware WERE you on?
I was on 4.4.2 from tmobile stock but it was rooted.
What did you do to cause it to soft brick?
I have been getting prompted for an OTA update for a while and kept putting it off. let my wife use my phone and she clicked approve for the update. The phone then rebooted and never booted back up. I originally thought it was a knox issue but after trying a few different recovery methods, all my errors seem to be directed to the PIT. I am currently downloading the Samsung firmware for 4.4.4 from the Samsung website to try sending over to the phone from odin.
Model: SGH-M919
Model name: GALAXY S4
Country: USA (T-Mobile)
PDA: M919UVUFNH7
What versions of the software / firmware have you tried?
4.2.2, 4.4.2, about to try 4.4.4 when it finishes downloading.
Why were you trying different PIT files??
because the current error is "secure check fail: PIT"
What errors are you having?
from which location? odin or the device?
from the device:
secure check fail: PIT
from odin:
big red FAIL in the first box. message output is below.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So I have this message on the screen "firmware upgrade encountered an issue. please select recovery mode in kies & try again".
I have tried installing alot of new firmware, but it doesn't help. Everytime I'm installing a new firmware it just goes to <ID:0/003> factoryfs.img
<ID:0/003> FAIL!
Someone please help me fix my phone?
LOG:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> factoryfs.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Hi there,
Where are you downloading the firmware files from? Is it from a reliable source? Did your phone have enough power to complete the flash? What about a different computer?
Regards, gsstudios
gsstudios said:
Hi there,
Where are you downloading the firmware files from? Is it from a reliable source? Did your phone have enough power to complete the flash? What about a different computer?
Regards, gsstudios
Click to expand...
Click to collapse
Thanks for you reply, I am downloading the files from sammobile.com and I charged my phones battery before I did it.
mixtape45 said:
Thanks for you reply, I am downloading the files from sammobile.com and I charged my phones battery before I did it.
Click to expand...
Click to collapse
Try an Older Version of 'ODIN' and see, Sometimes the latest version do pose Issues for u
I always use ODIN ver 1.85 as it has never failed for me so far
Sun90 said:
Try an Older Version of 'ODIN' and see, Sometimes the latest version do pose Issues for u
I always use ODIN ver 1.85 as it has never failed for me so far
Click to expand...
Click to collapse
I have tried using that version, and I have tried using the latest version of odin.
mixtape45 said:
Thanks for you reply, I am downloading the files from sammobile.com and I charged my phones battery before I did it.
Click to expand...
Click to collapse
Have you followed this guide before posting on XDA: http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Regards, gsstudios
I did try that guide, and I got past the usual factoryfs.img but my phones battery discharged, and when I charged it, I still get FAIL at factoryfs.img
Hi. I have S6 edge SM-G925F. I tried to flash custom rom,but i didn't backup EFS files. And now as you can guess, i don't have signal. I tried to flash stock firmware with odin but i got error. How can i make EFS work again? Download from somewhere and flash it? If yes,would you share it?
FakeSmile said:
Hi. I have S6 edge SM-G925F. I tried to flash custom rom,but i didn't backup EFS files. And now as you can guess, i don't have signal. I tried to flash stock firmware with odin but i got error. How can i make EFS work again? Download from somewhere and flash it? If yes,would you share it?
Click to expand...
Click to collapse
What error did you get flashing stock in odin?
I dont think anybody will share there efs backup.. as you will end up with there imei, which means cloned imei, also its illegal to do that in some countrys.
Best way is to flash the same stock you had before.
Sent from my SM-G925F using Tapatalk
callumbr1 said:
What error did you get flashing stock in odin?
I dont think anybody will share there efs backup.. as you will end up with there imei, which means cloned imei, also its illegal to do that in some countrys.
Best way is to flash the same stock you had before.
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
Is this going to bring back my efs?
FakeSmile said:
Is this going to bring back my efs?
Click to expand...
Click to collapse
I did exactly the same a few weeks back. I flashed the stock i was on before and efs was restored.
Ok. Thanks a lot.
callumbr1 said:
I did exactly the same a few weeks back. I flashed the stock i was on before and efs was restored.
Click to expand...
Click to collapse
This is the error i got when trying to flash stock firmware from sammobile:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU4DPGW_G925FITV4DPH1_G925FXXU4DPGW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also how can i find out which firmware i was before i start flashing?
FakeSmile said:
Also how can i find out which firmware i was before i start flashing?
Click to expand...
Click to collapse
Which region are you? Is your phone unlocked or is it locked to a network? What android version was you on?
---------- Post added at 06:44 AM ---------- Previous post was at 06:30 AM ----------
FakeSmile said:
This is the error i got when trying to flash stock firmware from sammobile:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU4DPGW_G925FITV4DPH1_G925FXXU4DPGW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
Download the pit file from the link.
In odin click ap and insert the firmware again. The one you just used G925FXXU4DPGW.
click PIT and insert the pit file from the link. In options you need to check re partition and auto reboot.
Flash and that will fix the hidden.img
I was on android 6.0.1 August 1 st security patch. Im from Bulgaria so region should be Europe.
FakeSmile said:
I was on android 6.0.1 August 1 st security patch. Im from Bulgaria so region should be Europe.
Click to expand...
Click to collapse
Did you try to flash the firmware with the PIT?
Try this if pit didn't work ...
Extract the firmware , rename hidden.img to hidden.img.tar
Now flash hidden.img.tar in AP with Odin
BTW : it is possible you have to restart your phone in download mode after flashing the firmware to flash the hidden.img.tar after it
Good luck