Stock i500 shows roaming even after programming, wont SMS or pick up data. I notice looking through everything the ERI is; None.....
I used droidstyle's guide (beautiful write up) and reloaded EI20 2.3.5 gingerbread Rom & Atlas 2.2 pit file successfully using Odin3 V3.07- and still nothing
I then updated the flashed the EC09 Radio... same thing
Next re-did everything but used Odin V1.3 just to make sure I was not messing something up by using a newer version of the program I already had.
Here's what info is showing currently after everything:
Firmware: 2.3.5
Baseband: S:i500.04 V.EC09
Kernel: 2.6.35.7
Build: SCH-I500.EH03
PRL: 53000
ERI: None
Any help would be greatly appreciated, Thanks in advance
PPCTechNC said:
Stock i500 shows roaming even after programming, wont SMS or pick up data. I notice looking through everything the ERI is; None.....
I used droidstyle's guide (beautiful write up) and reloaded EI20 2.3.5 gingerbread Rom & Atlas 2.2 pit file successfully using Odin3 V3.07- and still nothing
I then updated the flashed the EC09 Radio... same thing
Next re-did everything but used Odin V1.3 just to make sure I was not messing something up by using a newer version of the program I already had.
Here's what info is showing currently after everything:
Firmware: 2.3.5
Baseband: S:i500.04 V.EC09
Kernel: 2.6.35.7
Build: SCH-I500.EH03
PRL: 53000
ERI: None
Any help would be greatly appreciated, Thanks in advance
Click to expand...
Click to collapse
The EI20 is for the Mesmerize/Showcase version, not the verizion/page plus fascinate
as far as I know that is the case,,, but for sure these work
as pulled from guide from droidstyle
Section 7: Radio/Modems
[EC09]- http://forum.xda-developers.com/attachment.php?attachmentid=631016&d=1308583586
This gingerbread radio gives me really good data speed w/ the least amount of 1x swtiching
[EH03]-http://www.mediafire.com/?uuvxtuwonl2e629
This latest gingerbread radio gives good data speed, but It spends alot of time in 1x
[ED05]- http://www.mediafire.com/?c7h1wl5wne51duf
This is probably the best froyo radio, but I get better data speeds with the gingerbread radios. Although this radio has less 1x switching than eh03 imo
Install through ODIN::
Step 1: Downlaod odin and samsung drivers from one of the previous sections to pc
Step 2: Download one of the radios from above to pc
Step 3: Power off phone, pull battery, and plug in usb cable from phone to pc
Step 4: Hold volume down until yellow triangle appears (download mode)
Step 5: Open odin and put the file you downloaded from step 2 in the pda function of odin and hit start
Step 6: After odin says successful, click reset, uplug usb cable, insert battery and reboot
-----------------------
have you activated the phone yet?
I remember this happening to me and others before,,, you may have to do an esn swap,,,IE: switch you account over to a different/old phone then back over th this new/current phone and it will re-initiate everything properly.
.
hhp_211 said:
The EI20 is for the Mesmerize/Showcase version, not the verizion/page plus fascinate
as far as I know that is the case,,, but for sure these work
as pulled from guide from droidstyle
Section 7: Radio/Modems
[EC09]- http://forum.xda-developers.com/attachment.php?attachmentid=631016&d=1308583586
This gingerbread radio gives me really good data speed w/ the least amount of 1x swtiching
[EH03]-http://www.mediafire.com/?uuvxtuwonl2e629
This latest gingerbread radio gives good data speed, but It spends alot of time in 1x
[ED05]- http://www.mediafire.com/?c7h1wl5wne51duf
This is probably the best froyo radio, but I get better data speeds with the gingerbread radios. Although this radio has less 1x switching than eh03 imo
Install through ODIN::
Step 1: Downlaod odin and samsung drivers from one of the previous sections to pc
Step 2: Download one of the radios from above to pc
Step 3: Power off phone, pull battery, and plug in usb cable from phone to pc
Step 4: Hold volume down until yellow triangle appears (download mode)
Step 5: Open odin and put the file you downloaded from step 2 in the pda function of odin and hit start
Step 6: After odin says successful, click reset, uplug usb cable, insert battery and reboot
-----------------------
have you activated the phone yet?
I remember this happening to me and others before,,, you may have to do an esn swap,,,IE: switch you account over to a different/old phone then back over th this new/current phone and it will re-initiate everything properly.
.
Click to expand...
Click to collapse
Tey diqling *288 let it xomplete then rw
Reboot
PPCTechNC said:
Stock i500 shows roaming even after programming, wont SMS or pick up data. I notice looking through everything the ERI is; None.....
I used droidstyle's guide (beautiful write up) and reloaded EI20 2.3.5 gingerbread Rom & Atlas 2.2 pit file successfully using Odin3 V3.07- and still nothing
I then updated the flashed the EC09 Radio... same thing
Next re-did everything but used Odin V1.3 just to make sure I was not messing something up by using a newer version of the program I already had.
Here's what info is showing currently after everything:
Firmware: 2.3.5
Baseband: S:i500.04 V.EC09
Kernel: 2.6.35.7
Build: SCH-I500.EH03
PRL: 53000
ERI: None
Any help would be greatly appreciated, Thanks in advance
Click to expand...
Click to collapse
Sent from my SCH-I500 using Tapatalk 2
@ hhp_211 - I did try the Radio's listed but I had already tried these.
I ended up using the power wash ROM today same method for loading it, and it cleared up my data issues. I'm not sure why but the stock ROM just couldn't get it done I tried using V2.2 and 2.3.5 still same thing.
I'd like to understand this a little better if anyone can shed some light on this but my issue was resolved, thanks for the time guys.
PPCTechNC said:
@ hhp_211 - I did try the Radio's listed but I had already tried these.
I ended up using the power wash ROM today same method for loading it, and it cleared up my data issues. I'm not sure why but the stock ROM just couldn't get it done I tried using V2.2 and 2.3.5 still same thing.
I'd like to understand this a little better if anyone can shed some light on this but my issue was resolved, thanks for the time guys.
Click to expand...
Click to collapse
Question: do you have an ERI now with working data, or do you simply have data but still no ERI [global data warning message?]
Related
Unfortunately I can't post this question in the thread that the issue originated from but :
last night I was on com rom 2.0 with OTb1.6 kernel and ec01 radio. I did the ODIN flash to DL09 modem and then up to ED04. Had no issues at all. This morning I decided to take the plunge into gingerbread and used this thread here JT1134 CW7. I played around with this for a few hours and didn't seem to have any issues besides the known bugs. So then I decided to up to the newer rom by nemisis2all
Nothing seemed to have any issues in the orange CWM while applying the update
Now I have no signal.
Has anyone else experienced this?
Also is there a link anywhere for just the original kernel from JT1134 CM7 test build 06/09
EDIT: looking at the phone status is says baseband unknown. So I think I'm just going to wipe all and go back to the original 06/09 build byJT1134 unless anyone has just the kernell.
Thanks up front
Josh
You should try flashing a recent modem first to see if that resolves the problem. I am using EC01 just fine with the 6.09 build from the thread you linked. I have noticed on occasion mobile data will drop, but it seems toggling wifi fixes that (cannot say for sure). But I have not had any problems with voice signal.
It is still an alpha, so keep that in mind, but it has been working great for me.
with the ED04 modem, I did have the signal drop for a few moments earlier, but it seemed fine after reboot. and I have noticed that the mobile data does drop occasionally after being on Wifi for a period of time, but reboot seems to fix that too.
Ya i even just tried to flash all 3 times data, dalvik, cache and then install the CMW7 test 2 from JT again thinking it would jsut revert to the old kernel included in his and work again. But it is still no signal and no baseband version.
Jduke705 said:
Ya i even just tried to flash all 3 times data, dalvik, cache and then install the CMW7 test 2 from JT again thinking it would jsut revert to the old kernel included in his and work again. But it is still no signal and no baseband version.
Click to expand...
Click to collapse
I probably should have read in a bit deeper, in order to flash to the ED04 modem I actually had to flash back to a touchwiz rom then flash over the DL09 and I used CWM 3.0.x to flash up to ED04. I had tried to do it in the orange CWM that came with CM7 test 2 and it failed multiple times. After I had gone back to DL09 and updated modem I just flashed CM7 back over and have not had much problem since other than data dropping.
I Just Odin the modem back to DL09 and then CWM Orange from DL09 to ED04 and working again. Thanks for the input guys.
Been looking for a solution for the past 12 hours and have not found any.
Bought a stock i777 with 2.3.4, flashed with SGH-I777_ClockworkMod-Recovery_5.0.2.3 and a stock 2.3.5 AT&T ROM. After ANY kernel is flashed, I seem to lose WiFi capability. I have 5 wireless points near my house and it just gets stuck on "Scanning" and then the WiFi turns off. No points are even listed!
Currently running CW 5.0.2.3 kernel, 2.3.5 AT&T stock ROM, UCKJ1 baseband, kernel 2.6.35.7.
TL-DR - Flashed and lost wifi ability.
Which 2.3.5 ATT stock rom is this that you're referring to? Have a link to where you got it from?
I believe I got it from here: androidadvices.com/update-samsung-galaxy-s2-i777-gingerbread-235-firmware/
Did it work initially when you went to 2.3.5? You said you've tried some different kernels, at what point did you notice the wifi broke?
I even reflashed using kernel + non-rooted system package located in this thread: http://forum.xda-developers.com/showthread.php?t=1286432
Still no WiFi showing. Just says "scanning" then the wifi shuts off.
Update: Flashed Entropy512's stock package + nonrooted with no luck. No wifi. Flashed zetamax kernel after. Still no wifi.
Showed at that time: version 2.3.4, 1777UCKH7 baseband, 2.6.35.7_ZedomaxStockKernel.
Flashed again with a I777UCKJ1 2.3.5 ODIN package that I know will fix the WiFi. It shows version 2.3.5, 1777UCKJ1 baseband, 2.6.35.7 kernel.
Seems like if I flash ANYTHING else besides this the wifi stops working on me.
Solved problems for myself.
Completely unrooted, reflashed ATTGalaxyS2Unroot_SGH-i777.tar. This brought me back to the original AT&T firmware that came with the phone. I then flashed SGH-I777_ClockworkMod-Recovery_5.0.2.3.tar and subsequently used SuperOneClick 2.2 to root.
WiFi seems to be working fine now. I am now running a stock 2.3.4 ROM, UCKJ1, kernel 2.6.35.7...Clockworks version.
If anyone else is having the same issue this should help.
Thanks for the updates. Sounds like a frustrating battle. Glad all is well.
Sent from my páhhōniē
rpesta said:
Solved problems for myself.
Completely unrooted, reflashed ATTGalaxyS2Unroot_SGH-i777.tar. This brought me back to the original AT&T firmware that came with the phone. I then flashed SGH-I777_ClockworkMod-Recovery_5.0.2.3.tar and subsequently used SuperOneClick 2.2 to root.
WiFi seems to be working fine now. I am now running a stock 2.3.4 ROM, UCKJ1, kernel 2.6.35.7...Clockworks version.
If anyone else is having the same issue this should help.
Click to expand...
Click to collapse
Hrrrrm Having the same issues and the only way I could manage wifi to get back on was going to 2.3.5 which had it's own set of issues. I tried following your steps but one thing I noticed you said you were running UCKJ1 but isn't that 2.3.5? When I flash the exact same files I am still stuck without working wifi
Still noobing it up here - hopefully I can either stumble upon a fix like you did or spot someone else's that matches my issues...
Avoid that androidadvices.com **** - Half the time they link to firmware that isn't even for the device it claims it is, carrying a high risk of a hardbrick.
I only experienced this when I was trying to upgrade kernels using the SHOstock ROM. I get no wifi with siyah and can't send MMS with Entropy's kernel. That's the only time I've had those issues. Maybe you had a bad download? Glad you got it fixed though.
Just to clarify, those kernels work great with most other ROMS I've tried them on.
Sent from my SAMSUNG-SGH-I777 using XDA App
Had the same problem
I had this problem (with wifi, not mms) after rooting from 2.3.6. I eventually flashed Zedomax's kernel using mobile odin and wifi functionality was restored.
I still haven't moved on from there, but probably will sometime this week.
Jank4AU said:
I only experienced this when I was trying to upgrade kernels using the SHOstock ROM. I get no wifi with siyah and can't send MMS with Entropy's kernel. That's the only time I've had those issues. Maybe you had a bad download? Glad you got it fixed though.
Just to clarify, those kernels work great with most other ROMS I've tried them on.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
Weird, I cannot think of anything that would cause MMS to fail - what sort of errors?
It's happened to me several times after I flash a kernel. when I attempt to send an mms it just hangs and says sending but it never goes out. Could it be a conflict as I have Chomp set as my primary messaging app? Although if that were the case it should be able to send from one or the other but it doesn't. Can't remember for sure but I believe that I may have flashed the kernel cleaning script beforehand in each instance. The only way I've been able to fix it is to reinstall everything starting with the ROM. I'm sure it's user error.
As info, steps I took to try to fix before I restored:
1) reflash kernel
2) flash radio again
3) tried all 5 radios released (not a radio problem I'm guessing)
4) wipe dalvik and reflash kernel
5) run kernel cleaning script and reflash kernel
No dice, it was bizarre. Is this even the sort of event that you could get an error log from? There was no FC or any error message, you know? If it happens again what can I provide you that would help...can I do a logcat or whatever? ;-)
By the way,I could receive mms, just not send.
Sent from my SAMSUNG-SGH-I777 using XDA App
I have no wifi but I'm looking for the ATTGalaxyS2Unroot_SGH-i777.tar and I can't find any link, can you point me there? thanks
AMATHEU said:
I have no wifi but I'm looking for the ATTGalaxyS2Unroot_SGH-i777.tar and I can't find any link, can you point me there? thanks
Click to expand...
Click to collapse
Here you go. It is a sticky in the development threads
http://forum.xda-developers.com/showthread.php?t=1286432
AMATHEU said:
I have no wifi but I'm looking for the ATTGalaxyS2Unroot_SGH-i777.tar and I can't find any link, can you point me there? thanks
Click to expand...
Click to collapse
galaxys2root.com's kangs are not supported here...
A proper supported package was linked in the post above.
Factory Data Reset restored wi-fi
I was on UCKK6 (2.3.6) and rooted by flashing Entropy512's Return/Unbrick to Stock (2c)
http://forum.xda-developers.com/showthread.php?p=18576627
and lost wi-fi (scanning then wi-fi shuts off).
Since I was reverting from UCKK6 back to UCKH7, I had to do a factory data reset
(Menu > Settings > Privacy > Factory Data Reset)
based on the info in this thread:
http://forum.xda-developers.com/showthread.php?t=1286432
I got wi-fi back once I did the Factory Data Reset.
I'm having the same problem
Giant noob here =(
Could someone post step by step instructions on how to unroot so that I can restore my wifi?
For example, if in fact doing the factory data reset as described in the post above me is the correct course of action... is there a way to do a backup before so that I do not lose all my apps and stuff?
Thanks
RocketOptics said:
I was on UCKK6 (2.3.6) and rooted by flashing Entropy512's Return/Unbrick to Stock (2c)
http://forum.xda-developers.com/showthread.php?p=18576627
and lost wi-fi (scanning then wi-fi shuts off).
Since I was reverting from UCKK6 back to UCKH7, I had to do a factory data reset
(Menu > Settings > Privacy > Factory Data Reset)
based on the info in this thread:
http://forum.xda-developers.com/showthread.php?t=1286432
I got wi-fi back once I did the Factory Data Reset.
Click to expand...
Click to collapse
Was having problem with WiFi on my T-Mobile SGS2 where it was seem like it was turning on, then try to start scanning for networks then would automatically turn off...I was pulling me hair out reflashing it with different ROMs, and Radios, and doing a "Factory Data Reset" from inside the main Settings screen fixed the problem...thanks a lot guy!
Hi Guys,
I've run into a bit of a problem and cannot find my way around it, my phone can be used for everything except making a damn phone call i.e. I can make calls, folks can see me calling and receive it but I hear a blank on my end and so does the receiver, no dialogue. I tried everything listed on other topics but cant seem to get phone calls working again....so please help....
I know exactly when this started happening so here's the details
I was running the Foxhound 3.0 ROM listed in the following thread and it was running perfect
http://forum.xda-developers.com/showthread.php?t=1486199
then I found a new ICS theme posted on the following thread
http://forum.xda-developers.com/showthread.php?t=1334922
and tried flashing that according to every step mentioned and although the ROM was running ok, I couldnt access system settings because my only option available was NOVA settings, my back button, phone calls & wifi wasnt working.
I looked into some of threads posted on the forum listed below and tried out every step to fix the problem but to no avail.
http://forum.xda-developers.com/showthread.php?t=1286432
http://forum.xda-developers.com/showthread.php?t=1313659
http://forum.xda-developers.com/showpost.php?p=20229527&postcount=46
List of methods attempted
1. Restore mirror from my stock rooted ROM - fixed wifi but no phone calls
2. Restore mirror from ICSrewd ROM - same result
3. Used ODIN to go back to Unrooted Stock - still no phone calls
Kernel + non-rooted UCKH7 system package
4. Used ODIN to flash a different Kernel with root - same result
Kernel + cache + rooted UCKK6 system package
5. Full wipe and reflashed ICSrewd - same result.
Now i have so much info cluttered in head that I'm experiencing what people call 'writer's block' or what I would call 'Brain Dissolution' :-(
Can anyone please suggest a solution for this? My current phone deets are as follows
- At&t Samsung Galaxy SGH i777
- Android 2.3.6 Baseband i9100XXLPH
- Siyah v2.6.7
- Build ICSrewd v2.0.1 KL1
unkindestdude said:
Hi Guys,
I've run into a bit of a problem and cannot find my way around it, my phone can be used for everything except making a damn phone call i.e. I can make calls, folks can see me calling and receive it but I hear a blank on my end and so does the receiver, no dialogue. I tried everything listed on other topics but cant seem to get phone calls working again....so please help....
I know exactly when this started happening so here's the details
I was running the Foxhound 3.0 ROM listed in the following thread and it was running perfect
http://forum.xda-developers.com/showthread.php?t=1486199
then I found a new ICS theme posted on the following thread
http://forum.xda-developers.com/showthread.php?t=1334922
and tried flashing that according to every step mentioned and although the ROM was running ok, I couldnt access system settings because my only option available was NOVA settings, my back button, phone calls & wifi wasnt working.
I looked into some of threads posted on the forum listed below and tried out every step to fix the problem but to no avail.
http://forum.xda-developers.com/showthread.php?t=1286432
http://forum.xda-developers.com/showthread.php?t=1313659
http://forum.xda-developers.com/showpost.php?p=20229527&postcount=46
List of methods attempted
1. Restore mirror from my stock rooted ROM - fixed wifi but no phone calls
2. Restore mirror from ICSrewd ROM - same result
3. Used ODIN to go back to Unrooted Stock - still no phone calls
Kernel + non-rooted UCKH7 system package
4. Used ODIN to flash a different Kernel with root - same result
Kernel + cache + rooted UCKK6 system package
5. Full wipe and reflashed ICSrewd - same result.
Now i have so much info cluttered in head that I'm experiencing what people call 'writer's block' or what I would call 'Brain Dissolution' :-(
Can anyone please suggest a solution for this? My current phone deets are as follows
- At&t Samsung Galaxy SGH i777
- Android 2.3.6 Baseband i9100XXLPH
- Siyah v2.6.7
- Build ICSrewd v2.0.1 KL1
Click to expand...
Click to collapse
You got an i9100 modem on your device from something you flashed (probably the theme package from the i9100 forums - but I didn't d/l it to look) as evidenced by your baseband reporting i9100XXLPH.
Though I think some of the packages you have tried flashing to fix it have modems, I would go to the appropriate modems thread (I think they are linked from the sticky in general) and grab whichever i777 modem you were running before and flash that...
dandrumheller said:
You got an i9100 modem on your device from something you flashed (probably the theme package from the i9100 forums - but I didn't d/l it to look) as evidenced by your baseband reporting i9100XXLPH.
Though I think some of the packages you have tried flashing to fix it have modems, I would go to the appropriate modems thread (I think they are linked from the sticky in general) and grab whichever i777 modem you were running before and flash that...
Click to expand...
Click to collapse
Ok, so here's my question, when I flash the Stock ROM, doesnt it already come with the stock modem too? or do I still have to dl and flash the stock modem separately?
unkindestdude said:
Ok, so here's my question, when I flash the Stock ROM, doesnt it already come with the stock modem too? or do I still have to dl and flash the stock modem separately?
Click to expand...
Click to collapse
ICScrewD should have given you the UCKH7 modem. Not sure why it didn't overwrite your i9100 modem. As I haven't been in this situation to have to get out of it, there may be more to it. My first step would be trying to flash just the correct modem package over what you currently have...other than that, others have been in this situation - search is your friend.
dandrumheller said:
ICScrewD should have given you the UCKH7 modem. Not sure why it didn't overwrite your i9100 modem. As I haven't been in this situation to have to get out of it, there may be more to it. My first step would be trying to flash just the correct modem package over what you currently have...other than that, others have been in this situation - search is your friend.
Click to expand...
Click to collapse
Ok I was still on ICSrewd when I tried flashing UCKH7 but it didnt overwrite the i9100 modem even after multiple flashes. I tried doing it thru ODIN and it still failed. So I went back to the Stock ROM and re-tried it and guess what....success!! ......which is weird, I'm not sure if it is an issue with ICSrewd new version 2.0.1...anyhow...now I'm experiencing ridiculous battery drain, so should I try various modem combinations to see which one works?
unkindestdude said:
Ok I was still on ICSrewd when I tried flashing UCKH7 but it didnt overwrite the i9100 modem even after multiple flashes. I tried doing it thru ODIN and it still failed. So I went back to the Stock ROM and re-tried it and guess what....success!! ......which is weird, I'm not sure if it is an issue with ICSrewd new version 2.0.1...anyhow...now I'm experiencing ridiculous battery drain, so should I try various modem combinations to see which one works?
Click to expand...
Click to collapse
After all that flashing, you'll probably see heavy battery drain for a few days. I usually have to go 3 battery cycles full to empty (which is 3 days for me) before I see stable battery behavior after flashing new roms.
Sent from my SGH-I777 using XDA App
dandrumheller said:
After all that flashing, you'll probably see heavy battery drain for a few days. I usually have to go 3 battery cycles full to empty (which is 3 days for me) before I see stable battery behavior after flashing new roms.
Sent from my SGH-I777 using XDA App
Click to expand...
Click to collapse
I should've read this earlier
What I did instead was flash the turkbey ROM and went thru 2 cycles with it already so now I'm seeing some level of stability i.e. 19 hrs of battery time approx with about 5 hrs of Screen On time, which is pretty decent I guess.
Thanks for advice mate.
So I was running ICS with success until I was told by my provider that they were gonna do some PRL updates on my phone. Had to revert to stock before they could update it.
Anyways, so i reverted and they updated. I was at Froyo Release then tried flashing Teamhacksung ICS Build 10 with Glitch v14 and data did not work whatsoever.
Flashed back to froyo. Can anyone help me out?
leonvx671 said:
So I was running ICS with success until I was told by my provider that they were gonna do some PRL updates on my phone. Had to revert to stock before they could update it.
Anyways, so i reverted and they updated. I was at Froyo Release then tried flashing Teamhacksung ICS Build 10 with Glitch v14 and data did not work whatsoever.
Flashed back to froyo. Can anyone help me out?
Click to expand...
Click to collapse
odin back to stock eh03 and start fresh.
I did without success.
Flashed official EH03
Turned On
Turned Off
Flashed CWMALL
Booted into CWM
Flashed Teamhacksung BUILD 10
Auto booted
Data fail (3G appears on and off on the top but with no data able to connect)
leonvx671 said:
I did without success.
Flashed official EH03
Turned On
Turned Off
Flashed CWMALL
Booted into CWM
Flashed Teamhacksung BUILD 10
Auto booted
Data fail (3G appears on and off on the top but with no data able to connect)
Click to expand...
Click to collapse
please refer to section4 of my guide in the general section....your method is flawed.
Alright I found your guide droidstyle and attempted to follow your guide with Build 1 to start after stock EH03, but it came across the same result again. I'll attempt with build 2 when i can.
leonvx671 said:
Alright I found your guide droidstyle and attempted to follow your guide with Build 1 to start after stock EH03, but it came across the same result again. I'll attempt with build 2 when i can.
Click to expand...
Click to collapse
make sure your using cwm4 fixed for mtd and not cwmall....
Yes i made sure I dled the cwm on your guide. Will make time to work on retrying it soon.
Will there be a difference if I PDA eh03_full_odin.tar.md5 as opposed to CI500_VZW_EH03_GB_CM.tar.md5?
Ok so i have followed droidstyle's guide to key and I still can't get Data to work on THS ICS...
Maybe i can somehow help it with that hidden menu with data settings?
Some info to add is im not in the continental US and not under the Verizon Carrier.
You may need to change your apns to whatever works for you. These builds have only been made for 3 carriers. If you are not on one of those, it doesn't surprise me that it doesn't work, why would it. I would suggest giving people a little more info so they can help you. I don't know what they need to be changed to but if you would reveal the rest of the information I am sure there has to be someone out there who knows what to change them to. I am not sure if it is as simple as getting your apns before you flash all this, and then changing them back to those after flashing.
Sent from my SCH-I500 using Tapatalk
As the title states "I'm looking for the Ntelos Showcase Modem" or what ever gives you 3G back. I learned how to get him back to stock and if you need it follow this----------->http://forum.xda-developers.com/showthread.php?t=1955793
BUT! after that he loses 3G... He went to a Ntelos Store and they said "You Phone is connecting to Verizon".
When I heard that i was puzzled. The files I downloaded were named "EI20 Binary ntelos and small carriers" EXACTLY from the download.
I've used 1ST SOURCE:
http://rootzwiki.com/topic/34614-odin-stock-mesmerize-and-showcase-files-multiple-carriers/ and when to the files
EH09 Gingerbread: https://www.box.com/...te6vx25ndzg9u10
EI20 Gingerbread: https://www.box.com/...9i9hmywbknwyo13
FA10 Gingerbread TEST version (no guarantees it will work): https://www.box.com/...s06kxuz18ipqk9s
FF29 Gingerbread: https://www.box.com/...3k3qx6fonvb8wty
Modem Files: (I pulled these from the .tar files so they may not work correctly - please post if they do or dont)
EH09 Modem: https://www.box.com/...inuw84pz2hz3r4x
EI20 Modem: https://www.box.com/...a1i1i7dyy1iw247
FF29 Modem: https://www.box.com/...ckuqxocl631qtj2
and when I finished I got an error where it went straight to a RECOVERY and said NOTHING could be mounted,
2ND SOURCE:
This is what I used to get stock and he lossed 3G. http://rootzwiki.com/topic/19968-odingeneric-showcase-ntelosfe03-fc19fa10ei20eh09/
Apparently, There are people who love there 3G all I want to go is get him that back and if I can get assistance from anyone out there I can get my friends phone from him again and restore that Modem/Radio/(What ever it's called that get you 3G back)
I greatly appreciate anyone's help!
11.19.12 Been Getting results on RootzWiki so if you have extra info please click the link and add on what you know. Thank you.
This can be found at Rootz Wiki @ http://rootzwiki.com/topic/36142-q-does-anyone-have-the-stock-modem-for-ntelos-showcase/
It isn't the modem is in the fish that changed simple fix
Sent from my SPH-L720 using Tapatalk