Just curious if the new 2.3.4 gingerbread OTA can be unlocked using pudding. I'm having to get my atrix replaced via warranty and if the replacement happens to come with gingerbread already on it i want to know if i'll be able to unlock it or if i'll be stuck using p-roms.
You should be able to unlock it with pudding since its the same version of gingerbread that we have. Also, don't flash any sbf files (except pudding) because it has the new bootloader and you'll hard brick it if you do.
You can unlock with pudding and fastboot BUT there's a high chance you'll soft brick first with 0x1000 ... all you need to do is get into fastboot mode and redo the oem unlock command.
mysticdrew said:
You can unlock with pudding and fastboot BUT there's a high chance you'll soft brick first with 0x1000 ... all you need to do is get into fastboot mode and redo the oem unlock command.
Click to expand...
Click to collapse
Alright, just to be absolutely, completely, all the way, 101% sure: does this OTA have ANY bootloader restrictions, be they a brick or non-unlockable bootloader. Has anybody tried to unlock the bootloader and run a custom ROM on the AT&T OTA? I just want to be able to run custom ROM's down the road (as in full ROM's, as in Cyanogenmod).
Do the OTA and never, never go back to any older stock version via RSD. Or you'll brick your phone.
@Chairsofter1138: the ota bootloader is locked. flash the pudding to unlock.
Alright, has anyone actually attempted to unlock the OTA via the pudding method? I'm being extra cautious here because I don't want to be stuck with a permanently locked down phone. Does it matter, then, if I use Kenthepenns (sp?) installation method or OTA straight from AT&T/ Motorola?
Chairsofter1138 said:
Alright, has anyone actually attempted to unlock the OTA via the pudding method? I'm being extra cautious here because I don't want to be stuck with a permanently locked down phone. Does it matter, then, if I use Kenthepenns (sp?) installation method or OTA straight from AT&T/ Motorola?
Click to expand...
Click to collapse
Yes everyone has been unlocking via pudidng because it's the same leaked version that has been out for the past couple weeks.
Yes Going to this OTA will make a brickable phone. You WILL NOT BE ABLE TO DOWNGRADE via traditional SBF.
This is the question everyone has been asking on every thread and the devs aren't answering.
I am locked and stock on 1.83. My fuse HAS not been burnt. I want to be
1. On Gingerbread
2. Unlocked
The problem is that all the current gingerbread sbfs said you had to be ALREADY unlocked to flash them, so I don't know how anyone has been testing this OTA with a locked bootloader. If you had the new Gingerbread, you were already unlocked, is how I understood it.
Questions in follow up to the above:
1. If I OTA before unlocking, what do I flash afterwards to unlock? Saying 'pudding' because there's 10,000 files in that thread, including links to an 'unlocker.sbf', as well as a full sbf operating system. What specific file?
2. Lots of new builds say they have an 'unlocked bootloader' built in, but nobody can figure out what that means. Does that mean you can flash them without being unlocked to unlock? What do you need to do to unlock after you flash them?
3. If I unlock now at stock 1.83, and take the OTA, what happens, is the bootloader locked again? I know OTA installs a new bootloader.
Please someone help me understand. There's too much hard bricking and misinformation out there on all the dev threads. What's true (and please tell us how you know).
I noticed everyone talking about the OTA. I saw on the Moto site that the new update is only available OTA but there's a link for download for the file "Blur_Version.4.5.91.MB860.ATT.en.US". Can anyone confirm that this can be installed without brick on an unlocked bootloader? I've seen other threads stating so but they're not really clear on what's being said.
m0use1 said:
This is the question everyone has been asking on every thread and the devs aren't answering.
I am locked and stock on 1.83. My fuse HAS not been burnt. I want to be
1. On Gingerbread
2. Unlocked
The problem is that all the current gingerbread sbfs said you had to be ALREADY unlocked to flash them, so I don't know how anyone has been testing this OTA with a locked bootloader. If you had the new Gingerbread, you were already unlocked, is how I understood it.
Questions in follow up to the above:
1. If I OTA before unlocking, what do I flash afterwards to unlock? Saying 'pudding' because there's 10,000 files in that thread, including links to an 'unlocker.sbf', as well as a full sbf operating system. What specific file?
2. Lots of new builds say they have an 'unlocked bootloader' built in, but nobody can figure out what that means. Does that mean you can flash them without being unlocked to unlock? What do you need to do to unlock after you flash them?
3. If I unlock now at stock 1.83, and take the OTA, what happens, is the bootloader locked again? I know OTA installs a new bootloader.
Please someone help me understand. There's too much hard bricking and misinformation out there on all the dev threads. What's true (and please tell us how you know).
Click to expand...
Click to collapse
+1 to everything this guy said..There is a ton of guests in this forum wondering the same **** too. Devs are doing a fantastic job, but us end users (including myself) don't really have a sense of direction right now.
Hi everyone I have been looking around and found some info but somethings are still unclear. I know you should relock you phone and remove the revolutionary recovery? I downloaded the ruu.exe for my phone, I remember if I used htcdev to unlock originally but that didnt work completly so i then used revolutionary. I was wondering how to remove the revolutinary and relock so that i can run the ruu.exe to return to stock.
So I discovered a slight gap on certain edges of my One, which I got a week ago, and want to return it to AT&T for one that hopefully has no issues, but I've rooted, unlocked the bootloader, and flashed CM 10.1 on there. I searched through google and the forums here on XDA to find a method to relock the bootloader and go back to stock, but my search was fruitless. Apparently something called an RUU was needed? And according to the last post in this thread, that isn't available.
Is the RUU available now? Or is it currently impossible to relock the bootloader?
If so, would I be able to pull off just flashing the stock ROM back onto the phone and bringing it into AT&T? I feel like the only way they would realize something was different with the phone would be if they rebooted it, as I highly doubt most of the people in that store could even get into the bootloader screen. They had trouble syncing my google account.
Unless, of course, they send it back to the manufacturer and then THEY say that the warranty is voided because of the unlocked bootloader... but I don't know if they go through all that trouble in this situation?
Thanks for the help.
CAC1291 said:
So I discovered a slight gap on certain edges of my One, which I got a week ago, and want to return it to AT&T for one that hopefully has no issues, but I've rooted, unlocked the bootloader, and flashed CM 10.1 on there. I searched through google and the forums here on XDA to find a method to relock the bootloader and go back to stock, but my search was fruitless. Apparently something called an RUU was needed? And according to the last post in this thread, that isn't available.
Is the RUU available now? Or is it currently impossible to relock the bootloader?
If so, would I be able to pull off just flashing the stock ROM back onto the phone and bringing it into AT&T? I feel like the only way they would realize something was different with the phone would be if they rebooted it, as I highly doubt most of the people in that store could even get into the bootloader screen. They had trouble syncing my google account.
Unless, of course, they send it back to the manufacturer and then THEY say that the warranty is voided because of the unlocked bootloader... but I don't know if they go through all that trouble in this situation?
Thanks for the help.
Click to expand...
Click to collapse
For a quick and easy way, just boot into fast boot and cmd "fastboot oem lock"
The only problem with that is that if they DO boot into the bootlaoder, it will say "RELOCKED" instead of "LOCKED"
The longer way, is to S-OFF (find it in the international forum) and then follow instructions there to put the "LOCKED" text back.
CAC1291 said:
So I discovered a slight gap on certain edges of my One, which I got a week ago, and want to return it to AT&T for one that hopefully has no issues, but I've rooted, unlocked the bootloader, and flashed CM 10.1 on there. I searched through google and the forums here on XDA to find a method to relock the bootloader and go back to stock, but my search was fruitless. Apparently something called an RUU was needed? And according to the last post in this thread, that isn't available.
Is the RUU available now? Or is it currently impossible to relock the bootloader?
If so, would I be able to pull off just flashing the stock ROM back onto the phone and bringing it into AT&T? I feel like the only way they would realize something was different with the phone would be if they rebooted it, as I highly doubt most of the people in that store could even get into the bootloader screen. They had trouble syncing my google account.
Unless, of course, they send it back to the manufacturer and then THEY say that the warranty is voided because of the unlocked bootloader... but I don't know if they go through all that trouble in this situation?
Thanks for the help.
Click to expand...
Click to collapse
Get S-OFF, I was able to remove TAMPERED and change my UNLOCKED to LOCKED. You can also flash a modded HBoot that will take the red letters away and change the text from S-OFF to S-ON this will allow it to look like you never touched a thing
To get S-OFF I recommend http://forum.xda-developers.com/showthread.php?t=2314582
To mod your HBoot go through the post from here http://forum.xda-developers.com/showthread.php?t=2316726 (to download the HBOOT and here http://forum.xda-developers.com/showthread.php?t=1786498 to download the tool to create the modified HBOOT
But to let you know, I have returned 2 HTC Ones with unlocked bootloaders and AT&T did not say anything. Just flash the stock rom, make sure fastboot in enabled and leave it booted to the set up screen. Above is for if you want to be thorough and make sure you cover all your bases.
Ok, i am on ATT 4.4.2 with unlocked bootloader/S-OFF/Rooted/TWRP
i am still on stock rom, if i do the update, will my phone still be S-OFF (firewatered) and will i be able to unlock the bootloader?
Youll need stock recovery regardless to accept an OTA,unlocked and s-off is fine,to be safe I would unroot before taking any OTA, some say its not necessary but I dont leave things up to chance
Bradl79 said:
Ok, i am on ATT 4.4.2 with unlocked bootloader/S-OFF/Rooted/TWRP
i am still on stock rom, if i do the update, will my phone still be S-OFF (firewatered) and will i be able to unlock the bootloader?
Click to expand...
Click to collapse
I just got my replacement phone with i605vruand3 and wondering if there was any reason not to let it OTA update at this point. The bootloader is already locked right? Is there any advantage to not doing the OTAs. I do want to root it. WOULD LOVE TO unlock bootloader but that probably isnt possible.
Thanks.