Related
Hi
I really hope there are some people, who can help me
I have rooted my Galaxy s2 and installed cyanogenmod by rom manager, now I have no service on my phone.
I am not that expert in custom rom and rooting, so I hope some people can help me with this issue.
1000 X thanks in advance.
brgds.
The_84 / from Denmark
I think there are a lot of problems with Cyanogen on Galaxy sII. Did you back up your previous rom?
Try a different rom.
Or you can faf around with radio's it sounds like the radio software is not installed or wrong.
Plus go to the Cyanogen Forum for help just google it...
Hi
I am bit scared to use randomly solution from google, hope that someone know exact how to fix this problem on galaxy s2.
I think is something about installation of the radio software as u said.
Cyanogenmod should work proberly with the stable version.
Hope someone know how to, fix it ?
You should flash a new modem in Rom manager.. open rom manager go to codeworkx and flash KI3 or KI4
btw, this is not the right forum to post questions
Hi rg90
Thanks for the answer, I am not fully aware of the terminology, so appologise my stupid questions.
I have the program ROM Manager premium, I can Flash clockworkMod ? Is that what is you mean ?
What he means is. Try flashing the ki3 or ki4 modem. They can be found in Rom Manager under Download rom > Codeworks.
If it doesn't help. Do a full wipe (data, cache, dalvik cache) and flash CM again.
Next time post in Q & A forum.
Sent from my GT-I9100 using Tapatalk
do you have /efs folder backup? Go to phone information and check is your IMEI still there. If not then you need to restore your efs .
Hi
You right my IMEI number is not there, what is efs and how to do it ?
Hi Volapyk
thanks for the suggestion, I will try that.
Are u facing baseband version unknown problem?
go to setting, about phone and check it out.
Sent from my GT-I9100 using XDA Premium App
I think it worked, thanks alot
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
same problem
i understand i have to flash it but do I flash it using the cwsm program on my phone? Or do I boot it in cwsm mode or whatever it is? And flash it there I'm sorry guys still abit new to this
by cyanogenmod does he mean ICS 4.0.4 ( I downloaded the Ressurection 1.9.1 Rom off of galaxys2root.com it works well, especially awesome with SPB Shell 3D) Now i had service after everything was all said and done but no internet so I used wifi for abit but no more wifi, so i tried restarting and then i lost all the service i had.
I had the same issue after flashing cm. Make sure that you have the correct apn settings for your network. I'd not add them and reboot.
Sent from my GT-I9100 using xda premium
apn settings
buddn said:
I had the same issue after flashing cm. Make sure that you have the correct apn settings for your network. I'd not add them and reboot.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
what are my apn settings supposed to be? i have bell.ca or bell.internet.ca
If i go to mobile networks i can only find Rogers CAN Mobile network and because of my sim card i cant use it.. darn lol
I'm not going to be much help there I'm afraid as mine were Vodafone UK which I found on their forum.
Otherwise if you backed up first, restore your back up, and there is an app in the market which backs up your apn settings and you can restore them once you've flashed CM.
Sent from my GT-I9100 using xda premium
Hello everyone, I was using ultimarom till now and it worked like a charm. Today I thought hey lets upgrade to android 4.4 so I found temasek's rom and it seemed fine. After flashing the rom, it got stuck on boot screen. So I reflashed the stock rom (btw I wiped everything as required) and it was working. So I retried flashing the Temasek's rom and it booted this time, only thing is that my touch screen was not responding. The capacitive buttons are working also the touch screen is showing everything but not responding to anything. I searched a little bit, and it might be possible that my digitizer is broken which I hope is not since I am in a different country and it will be a pain to do it here. Also I read that if you tried to install Note 2 kernel/rom this might happen but I know that temasek's rom is definitely for s3 so it shouldnt be the case for me. Any help would be appreciated.
Thanks
Bektas
Darrier said:
Hello everyone, I was using ultimarom till now and it worked like a charm. Today I thought hey lets upgrade to android 4.4 so I found temasek's rom and it seemed fine. After flashing the rom, it got stuck on boot screen. So I reflashed the stock rom (btw I wiped everything as required) and it was working. So I retried flashing the Temasek's rom and it booted this time, only thing is that my touch screen was not responding. The capacitive buttons are working also the touch screen is showing everything but not responding to anything. I searched a little bit, and it might be possible that my digitizer is broken which I hope is not since I am in a different country and it will be a pain to do it here. Also I read that if you tried to install Note 2 kernel/rom this might happen but I know that temasek's rom is definitely for s3 so it shouldnt be the case for me. Any help would be appreciated.
Click to expand...
Click to collapse
have you changed your recovery?
if you flash now another rom or restore your old one does the screen still not work?
Darkened_Sky said:
have you changed your recovery?
if you flash now another rom or restore your old one does the screen still not work?
Click to expand...
Click to collapse
I tried with both stock and temasek once again and the touch screen still does not respond. I always used cwm for recovery though, and did a factory reset on the stock recovery once to see if that works. I can flash ultima as well I suppose but I am not sure if that will fix it.
Edit: I tried to flash ultima but the installation steps required the use of touch screen so I could not proceed.
Are you sure that you download Temasek's rom for I9300 not for another model? Because Temasek supports more devices.
And on Temasek's thread I didn't find any user complaining about touch screen issue after installing it,so I think that you flashed it for different model.
Darrier said:
Hello everyone, I was using ultimarom till now and it worked like a charm. Today I thought hey lets upgrade to android 4.4 so I found temasek's rom and it seemed fine. After flashing the rom, it got stuck on boot screen. So I reflashed the stock rom (btw I wiped everything as required) and it was working. So I retried flashing the Temasek's rom and it booted this time, only thing is that my touch screen was not responding. The capacitive buttons are working also the touch screen is showing everything but not responding to anything. I searched a little bit, and it might be possible that my digitizer is broken which I hope is not since I am in a different country and it will be a pain to do it here. Also I read that if you tried to install Note 2 kernel/rom this might happen but I know that temasek's rom is definitely for s3 so it shouldnt be the case for me. Any help would be appreciated.
Thanks
Bektas
Click to expand...
Click to collapse
Flash back to stock with odin if problem is still there then it is hardware issue....
I rechecked and it is temasek for I9300. I restocked ofc with odin and it is no use tbh. I mean it is weird as the first time I flashed stock rom the touch screen was not working for 30 seconds or sth than it started working so I was really happy for a second.. After another flash it was not working and I was like yea it will work soon, but it didnt. I tried with loads of roms and kernels and it is still no use.
Any help? I have no idea how to fix this! I may have to send my phone for replacement which will be costly I suppose.. Any little tip will be appreciated.
Darrier said:
Any help? I have no idea how to fix this! I may have to send my phone for replacement which will be costly I suppose.. Any little tip will be appreciated.
Click to expand...
Click to collapse
Didn't u install the new version of Cwm? I'm using ultimarom v16 & I try to use Android v4.4.2... It seemed good to me
Sent from my GT-I9300 using Tapatalk
Solution
Hey dude, I couldnt find any solution to that problem. What I did was to send it in for replacement but with warranty. For that you need to triangle away your phone and also install the official firmwares. I had to use a mouse in order to do that but you will need a usb to micro usb converter, which is not that hard to find( and also cheap). They couldnt tell that I installed unofficial firmware, I replaced my screen flawlessly. You can find how to triangle away your phone in this forum and also sammobile is the place to look for official firmware.
Cheers
wanerza77 said:
Didn't u install the new version of Cwm? I'm using ultimarom v16 & I try to use Android v4.4.2... It seemed good to me
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
So I flashed my HTC Droid DNA to Page Plus Cellular. That worked out all fine and dandy, however, the guy I paid to do this service for me warned me that if I flash a custom ROM it would break the radio flash. I had actually pre-flashed Cyanogenmod prior to flashing PPC, but he had me restore stock Andriod because, evidently, Cyanogenmods 10 and 11 do not include DIAG mode. So, my quesion is, IF I remove whatever .zip from the Cyanogenmod package that contains radio information, AND THEN flash Cyanogenmod using TWRP, would this break my carrier flash to PPC??? Thanks in advance for any help.
JACKc2402 said:
So I flashed my HTC Droid DNA to Page Plus Cellular. That worked out all fine and dandy, however, the guy I paid to do this service for me warned me that if I flash a custom ROM it would break the radio flash. I had actually pre-flashed Cyanogenmod prior to flashing PPC, but he had me restore stock Andriod because, evidently, Cyanogenmods 10 and 11 do not include DIAG mode. So, my quesion is, IF I remove whatever .zip from the Cyanogenmod package that contains radio information, AND THEN flash Cyanogenmod using TWRP, would this break my carrier flash to PPC??? Thanks in advance for any help.
Click to expand...
Click to collapse
In theory it should work..... replace the cm10 radio with the ppc radio(if compatible with cm) then flash as normal. It's not suggested you do this but it is interesting I would look into flashing radios and such first and make a backup of it current radio and all necessary files along with it... And always make a nandroid before you flash anything just in case... Although I could be wrong I'm not sure I don't mess with radios much...... (all in the name of discovery)
Sent from my HTC6435LVW using Tapatalk 2
Ok edit: was doing some research I guess you can do it to any rom except cm based (unless you get the cm team help you because I'm sure it's possible) was looking around The threads and found how to flash to Page Plus and resulting working on custom Rom.
Sent from my HTC6435LVW using Tapatalk
I just installed aokp 4.4.2 on my sprint galaxy s4. My phone is rebooting every 2 minutes. I don't know what is going on. I have installed multiple roms this week and this has never happened to me. If I need to give anymore information so you can help me, please tell me. Thanks in advance.
I had the same problem with my xperia t. When i flashed a cm rom it crashed and kept rebooting by itself in this weird bootloop. I just flashed a stock firmware using flashtool, at least it exited the bootloop, but I was still not able to flash the rom i wanted to.
You're flashing the accompanied kernel with your ROM right? Just checking! Any looping issues I've had have been due to this.
Sent from my One S using XDA Free mobile app
Hey guys! I'm using a Galaxy Note with a Bell board (was originally AT&T but that bricked because at the time I thought flashing an N7000 ROM would work, D'oh!) and I want to upgrade to a Jelly Bean Rom. I'm using Blackstar XI, a 4.0.4 ROM, and I'm looking for a lightweight JB rom. It can lack stylus/pen support, I found myself not using that feature as much as I thought I would.
Would I run into any issues using a QuincyATT Cyanogenmod 10.1.3 ROM, considering it's a Bell note board? Would I need to unlock my SIM first? And I recall there being a trick with Notepad++ I needed to do in order to make it work, even on my AT&T board.
I just have an issue with heavy RAM usage at boot and I can't even run some apps, since I know touchwiz is stupid.
Anyone willing to help me get it running on my note? Any help would be appreciated!
MoronDroid said:
Hey guys! I'm using a Galaxy Note with a Bell board (was originally AT&T but that bricked because at the time I thought flashing an N7000 ROM would work, D'oh!) and I want to upgrade to a Jelly Bean Rom. I'm using Blackstar XI, a 4.0.4 ROM, and I'm looking for a lightweight JB rom. It can lack stylus/pen support, I found myself not using that feature as much as I thought I would.
Would I run into any issues using a QuincyATT Cyanogenmod 10.1.3 ROM, considering it's a Bell note board? Would I need to unlock my SIM first? And I recall there being a trick with Notepad++ I needed to do in order to make it work, even on my AT&T board.
I just have an issue with heavy RAM usage at boot and I can't even run some apps, since I know touchwiz is stupid.
Anyone willing to help me get it running on my note? Any help would be appreciated!
Click to expand...
Click to collapse
If you like blackstar, I would just flash Blackstar Blackjelly after doing a backup. It's what I've been running as my go-to on my Telus note. The other jb's are great too, but cm comes with the odd small bug like echo on speaker phone. Most of the customizations make them worth trying though.
Sent from my SAMSUNG-SGH-I717
Sweet. I could give that a try if the Cyanogenmod ROM doesn't work. Is there anything I need to do in preparation, since this is technically a Bell note? Or can I just go ahead and flash the ROM without any changes to the ZIP?
MoronDroid said:
Sweet. I could give that a try if the Cyanogenmod ROM doesn't work. Is there anything I need to do in preparation, since this is technically a Bell note? Or can I just go ahead and flash the ROM without any changes to the ZIP?
Click to expand...
Click to collapse
I'm assuming you have an unlocked bootloader already since you are running cm. Just be sure to have latest cm recovery or gimmeitorilltell's twrp (although other versions work with Jellybean, if you try kitkat or lollipop you'll have problems). Make sure you are flashing a quincyatt rom.
I have been using SGH-I717ATT-UCMD3-Modem with great success for a radio. Your mileage may vary.
If you get no signal, before blaming the rom, first check your mobile networks access point names and settings to be sure they match your carrier. (A good idea is to take a couple screenshots of your settings now before you flash any new roms as there are quite a few numbers involved)
Sent from my SAMSUNG-SGH-I717
Good news! I tried the CM10.1.3 ROM and it worked well minus two small gripes:
1. Occasional freeze/hang on lock screen, causing it to reboot
2. Random artifacting/crashes during video playback/browsing through gallery
I'm gonna say this is the best performing ROM I've tried so far, but I'm going to give BlackJelly a try! I'll keep you posted. Just figured I'd give Cyanogenmod a proper shot now that I know how to install ROMs!
developweb said:
I'm assuming you have an unlocked bootloader already since you are running cm. Just be sure to have latest cm recovery or gimmeitorilltell's twrp (although other versions work with Jellybean, if you try kitkat or lollipop you'll have problems). Make sure you are flashing a quincyatt rom.
I have been using SGH-I717ATT-UCMD3-Modem with great success for a radio. Your mileage may vary.
If you get no signal, before blaming the rom, first check your mobile networks access point names and settings to be sure they match your carrier. (A good idea is to take a couple screenshots of your settings now before you flash any new roms as there are quite a few numbers involved)
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Time for BlackJelly! Downloading now.
I also may need some help getting the SIM to work once this ROM is on. So that way, I can use this stock-rom based OS for actual phone things instead of it just being a tiny tablet! Yay!
Can you point me in the direction of the latest TWRP recovery that I can flash through Odin?
MoronDroid said:
Time for BlackJelly! Downloading now.
I also may need some help getting the SIM to work once this ROM is on. So that way, I can use this stock-rom based OS for actual phone things instead of it just being a tiny tablet! Yay!
Can you point me in the direction of the latest TWRP recovery that I can flash through Odin?
Click to expand...
Click to collapse
I'm not sure about Odin, but I flashed the latest TWRP to my device using Rashr from Google Play store.
Other install methods are described here:
https://twrp.me/devices/samsunggalaxynote1att.html
Sent from my SAMSUNG-SGH-I717
developweb said:
I'm not sure about Odin, but I flashed the latest TWRP to my device using Rashr from Google Play store.
Other install methods are described here:
https://twrp.me/devices/samsunggalaxynote1att.html
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Upgrading my recovery now, yay! I also have the Phase kernel because I've heard a lot of good things about it.
MoronDroid said:
Upgrading my recovery now, yay! I also have the Phase kernel because I've heard a lot of good things about it.
Click to expand...
Click to collapse
Backup, backup, backup. If TWRP successfully installs then backup. If something goes wrong you can revert everything or just the boot partition. (Kernel)
Sent from my SAMSUNG-SGH-I717