Okay this has been annoying me for ages. Since the premium suite update I've had an NFC toggle in my notification bar but the picture is always missing and whenever I press it I just get System UI force closed. Any fix for this? I'm on XXELLA.
Carter0108 said:
Okay this has been annoying me for ages. Since the premium suite update I've had an NFC toggle in my notification bar but the picture is always missing and whenever I press it I just get System UI force closed. Any fix for this? I'm on XXELLA.
Click to expand...
Click to collapse
I have the same problem on stable CM 9.1
I was having the same issue on stock LLA. Got an OTA update to MB1 today, which seems to have sorted it.
Edit: Spoke too soon. After a few reboots, the issue is still present.
quark_star said:
I was having the same issue on stock LLA. Got an OTA update to MB1 today, which seems to have sorted it.
Click to expand...
Click to collapse
I did update to the same MB1 via Kies and still the same problem with an extra problem which is in this thread but couldn't solve it http://forum.xda-developers.com/showthread.php?t=1755202
Related
My wife accidently hit update when she was trying to respond to a text and now it is starting to update albeit over slow 3g so I doubt it will take. Any way to cancel it? She turned off her internet but I am pretty sure it will start up again correct?
Thanks in advance
It's just downloading the update. She doesn't have to actually install it though.
Sent from my EVO LTE using XDA
Settings, software updates, htc software updates. Uncheck the option to automatically check for updates.
Thanks everybody. She told me after I posted that it asked her if she wanted to install. She followed the instructions to uncheck but it is still in the status bar. Any ideas? Reboot?
Sean-El said:
Thanks everybody. She told me after I posted that it asked her if she wanted to install. She followed the instructions to uncheck but it is still in the status bar. Any ideas? Reboot?
Click to expand...
Click to collapse
I had it appear on my phone as well. There should be a running process called Updater that you can force stop. Once you do that, the notification disappeared for me and I unchecked the box to automatically look for updates. So far, so good.
bertimus2002 said:
I had it appear on my phone as well. There should be a running process called Updater that you can force stop. Once you do that, the notification disappeared for me and I unchecked the box to automatically look for updates. So far, so good.
Click to expand...
Click to collapse
Thank you sir. Sorry, I used all my thanks for the day , i tried.
I found out that T-mobile "paused" Jelly Bean Updates but my phone keeps showing the system update notification. Is there a way to turn it off?
frustrating
avatarx1 said:
I found out that T-mobile "paused" Jelly Bean Updates but my phone keeps showing the system update notification. Is there a way to turn it off?
Click to expand...
Click to collapse
I have the same thing, Seems my phone downloaded it already and wants me to install... notification pops up over and over and over. I would allow it to install if the update was solid.
Will I need root access to stop this?
It's a good update, I would do it. Just turn off GPS that eats your battery with the new update..
Sent from my LG-P769 using XDA Premium HD app
I'd love to know too.
avatarx1 said:
I found out that T-mobile "paused" Jelly Bean Updates but my phone keeps showing the system update notification. Is there a way to turn it off?
Click to expand...
Click to collapse
I rooted and installed cwm on V20d and it is constantly trying to get me to update to V20F. I don't want it, but I don't know how to stop it. is it an app I can disable with Titanium Backup? Anyone?
Thanks!
http://forum.xda-developers.com/showpost.php?p=37433783&postcount=10
Hi all,
Does anyone came across this warning when connecting to wifi network:
"There are some problems with internet connection, please check current WLAN network or connect to other WLAN network"
This message comes up every time I'm switching to wireless network.
Seems like there are no settings options to get rid of it. Maybe somebody knows how to disable it?
Never seent his error message before. Does it work with all Wifi connections or just your own wirelesss router.
Dark_Horse said:
Never seent his error message before. Does it work with all Wifi connections or just your own wirelesss router.
Click to expand...
Click to collapse
This happens while connecting to any wifi network - public, home, office.
Tried to run search for this message inside system apk's, but had no results. Is there any other method to find what populates this message?
Just noticed you are using what looks like a custom ROM. Is this the case? Have you tried a stock ROM?
Dark_Horse said:
Just noticed you are using what looks like a custom ROM. Is this the case? Have you tried a stock ROM?
Click to expand...
Click to collapse
Hi all. For me also same problem. It all started after the latest KitKat upgrade by Lenovo itself. This message stays on top of any current operation interfering it unless you get rid of it by using the return key, only then you could get access to the running application. It really get one bugged. Hope someone could have a solution.
Dark_Horse said:
Just noticed you are using what looks like a custom ROM. Is this the case? Have you tried a stock ROM?
Click to expand...
Click to collapse
this is not custom ROM, it's stock Lenovo ROM, and this started happening after kitkat update
Gi3drius said:
this is not custom ROM, it's stock Lenovo ROM, and this started happening after kitkat update
Click to expand...
Click to collapse
There you go then, previous poster also has the same issue so it looks like it's KitKat specific. Are you running the latest Kitkat?
I downgraded back to JB because the first release of stock KitKat was too buggy but the later KitKat updates fix a lot of problems so try the OTA updates first.
Wifi not working, white blinking all the time
Please any help,
My phone suddenly disconnected from office wifi. I am using p780 4gb. when the problem came, i was using latest update kitkat. then after downgrade to JB s115 in lenovo centre. wlan still cant work. when i try to switch on then by itself switch off again. I left it in lenovo centre and they said it should be machine replacement. i was ok but when the cost was mentioned it's surprised me coz the cost almost reached the price of new phone. Does anyone know how to solve this issue with cheaper cost?
Many thanks in advance.
Today I switch on mobile data using the toggle in notification area and the turn off after some usage. Later on, I tried to turn on again and the toggle disappeared? How do I make it show up again? No software update was done.
EXTRA information : Phone is completely stock. Never rooted it.
This thread is regarding to world wide missing toggle issue happened all around the world. Waiting for a fix from Samsung.
Issue status - [FIXED]
DOWNLOAD FIX APK = http://forum.xda-developers.com/showthread.php?p=61418555
OR
Go to Samsung app and find quick panel restore.
Cause of missing toggle still unknown.
Temporary Data only toggle fix = http://forum.xda-developers.com/showthread.php?p=61336822 Thanks to @NimeniAltu
Same problem with me: Missing Mobile data toggle Galaxy S6 Edge
It was there y'day but today the data toggle and mobile hot spot are both missing on the notification bar.
A lot of users are facing the same issue since today morning.
Is there a FIX ?
ArjunI said:
It was there y'day but today the data toggle and mobile hot spot are both missing on the notification bar.
A lot of users are facing the same issue since today morning.
Is there a FIX ?
Click to expand...
Click to collapse
Oh I just notice hot spot toggle missing as well. Good to know I'm not alone. Hope to see some solution soon.
yep on carhd custom rom and mine disappeared overnight too?? bizarre?
any fix available please?
thanks
I thought I was the only one
I was about to create a thread about this, especially on my devices it's not only the Mobile Data and Mobile Hotspot missing, but quite a few and it's really annoying, I was thinking that maybe after gaining root and changing the build prop settings for better multitasking caused this or maybe the mod I applied that removed the S-finder and Quick Connect buttons, did any of you guys make this modifications, check my attached screenshothot to see how worse mine is I was even thinking of going back to stock
Also I had a backup on Flashfire and when I restored it, everything was back to normal buy after some few minutes the issue is back again
Holy **** I thought I was going nuts !
Same problem here in Switzerland, Int. version. No update, nothing but during this night the toggle disapeared. I have no idea what's going on.
Same In France
grooted s6 edge not rooted
This is how it was before
I just restored the flashfire backup to see how it was before, check this
So you not rooted and facing the same issue?? If yes then it means that my assumptions we're wrong that it's probably because of the modifications I explained on my first post above
Skhulile said:
So you not rooted and facing the same issue?? If yes then it means that my assumptions we're wrong that it's probably because of the modifications I explained on my first post above
Click to expand...
Click to collapse
Not rooted, same issue sadly
ive got new button in place...Network restriction? but it cuts out everything data wise..like airplane mode- but you cannot put wifi on afterwards??
mines rooted but not changed anythting at all since rom install. its just removed by itself
Didn't have the time to look much into it but without any software update could it be related to Google Play Service ? I mean, I don't see how they could remotly remove it from us ?
Fix
Same thing here, no data toggle.
I fixed it through sqlite editor. I added MobileData and changed the number of active toggles.
Updated OP to mention I did not root
Wow. Seem like a lot of people having this issue. Interesting. All occur at once. How does this happen.
Should we wait or do a Factory Reset ?
This is a common issue since today. Something happened 6-7 hrs back causing this issue.
The big question is "what's the fix" ?
Since mine is an unlocked non-carrier International version, I am sure this is not a T-Mobile or Verizon issue.
Is there a way to contact someone in Samsung about this problem ?
Will a FACTORY RESET solve the issue ?
Any ideas ?
Has anyone tried a factory reset yet, I'm facing the same problem, some of my toggles are just gone. Not rooted, factory unlocked, so I have no idea what's going on.
brograms8 said:
Same thing here, no data toggle.
I fixed it through sqlite editor. I added MobileData and changed the number of active toggles.
Click to expand...
Click to collapse
Just did this on the at&t variant. Have to be rooted. Used this post http://forum.xda-developers.com/showthread.php?t=2721550 by risestar2.
missing data toggle
bibiner said:
Today I switch on mobile data using the toggle in notification area and the turn off after some usage. Later on, I tried to turn on again and the toggle disappeared? How do I make it show up again? No software update was done.
EXTRA information : Phone is completely stock. Never rooted it.
Click to expand...
Click to collapse
Same here..it suddenly disappeared. Mine is on stock rom, not rooted. Latest software AOE3. Please advise how to recover the data toggle in the notification area/quick toggles.
This must be some time booming bugs!
Mine fully stock no root from Malaysia also missing few toggle today.
I have Smart Lock set to auto unlock when my watch is paired via Bluetooth. After a few hours I've noticed that it stops working and all the options under Smart Lock are missing.
If I reboot, everything works fine again for another few hours and then the same thing happens again.
Any ideas?
/Edit: Found this: https://support.google.com/pixelpho...-is-not-working-after-the-recent-update?hl=en
Can't say for sure but the problem seems to have gone away with April update from Samsung. Previous to this update I was experiencing the same thing. I would go into security settings/other/trust agents and toggle smart lock off then on again and it would work basically the rest of the day. Updated to Samsung April software and it hasn't happened yet (today).
zoman7663 said:
Can't say for sure but the problem seems to have gone away with April update from Samsung. Previous to this update I was experiencing the same thing. I would go into security settings/other/trust agents and toggle smart lock off then on again and it would work basically the rest of the day. Updated to Samsung April software and it hasn't happened yet (today).
Click to expand...
Click to collapse
I'm running the latest April software and funnily enough that is when the issue started for me. It was fine before that update.
hshah said:
I'm running the latest April software and funnily enough that is when the issue started for me. It was fine before that update.
Click to expand...
Click to collapse
It appears to be a Google issue, so hopefully it gets worked out soon. I really only pay attention to it at work when my Buds are connected, but I'm pretty sure It was only happening after March Google Services update and before April Samsung update.
hshah said:
I'm running the latest April software and funnily enough that is when the issue started for me. It was fine before that update.
Click to expand...
Click to collapse
Same here, use Smart Lock all the time with connected GW4, noticed the issue today for first time - after April update...
Well...time to switch to Samsung Routines!
enij said:
Well...time to switch to Samsung Routines!
Click to expand...
Click to collapse
Then please explain the routine how my phone remains unlocked while connected to my smartwatch...
I do use Routines for other functions.
OnnoJ said:
Then please explain the routine how my phone remains unlocked while connected to my smartwatch...
I do use Routines for other functions.
Click to expand...
Click to collapse
If > Bluetooth device > select your GW
Than > search (with the search function) for unlock, you'll find ”keep the phone unlocked” or something like this.
Same issue here, uninstall the update for google play service, the function will be back.
Then you can update the gms again.
hinnn said:
Same issue here, uninstall the update for google play service, the function will be back.
Then you can update the gms again.
Click to expand...
Click to collapse
Did so but issue is back again after some time...
This happens to me every so often. I found that just toggling it off and on in the "Trust agents" works.
edited: from trust devices to trust agents - sorry for the typo
zeroktal said:
This happens to me every so often. I found that just toggling it off and on in the "Trust devices" works.
Click to expand...
Click to collapse
It works for me as well, but I think the point is that we shouldn't have to do that.
zeroktal said:
This happens to me every so often. I found that just toggling it off and on in the "Trust devices" works.
Click to expand...
Click to collapse
Not possible as the Smart Lock page does not show any option to do so...
See attachment of post #1, there is nothing you can do.
hshah said:
I'm running the latest April software and funnily enough that is when the issue started for me. It was fine before that update.
Click to expand...
Click to collapse
Yup same. Was fine, latest update screwed it all up.
Seems it's an android issue, not Samsung
OnnoJ said:
Not possible as the Smart Lock page does not show any option to do so...
See attachment of post #1, there is nothing you can do.
Click to expand...
Click to collapse
The Trust Agents toggle is in a different place.
hshah said:
The Trust Agents toggle is in a different place.
Click to expand...
Click to collapse
You stated trusted devices in your post, not trusted agents...
OnnoJ said:
You stated trusted devices in your post, not trusted agents...
Click to expand...
Click to collapse
You should check again... @zeroktal said that, not me
Ok so it seems mine disappears once my phone connects to android auto
God this is annoying
On my error report to Samsung (Members app) I received a reaction that
- multiple reports have been made
- Smart Lock is a Google application
- They reported the issue to Google
- Apparently it was/is a flag error in a Google server
- it should be good now after a restart.
I have the same issue.
enij said:
Well...time to switch to Samsung Routines!
Click to expand...
Click to collapse
Thanks. I have this issue and it works great.