I've been running cm10 for the past week or more. Last night phone powered off randomly, and when restarted came up with message saying the modem won't power on, starting rsd protocol, battery too low to flash. its been plugged in all night and says the same thing. ive factory reset in recovery mode, that didnt work. obviously cant sbf because the phone thinks the batt is dead. ??? phone wont turn on at all unless plugged into the wall
can you get into recovery? if so, it charges while in recovery.
Lorenzo VonMatterhorn said:
can you get into recovery? if so, it charges while in recovery.
Click to expand...
Click to collapse
I can, left it for a while and got the same message
Try another fully charged battery.
tallyforeman said:
Try another fully charged battery.
Click to expand...
Click to collapse
Or another battery I had my phone do the same thing ended up having to buy another battery and it was cm10 when it happened
P.S. there's a pretty good deal on anker atrix 1800mAh x2 w/ external charger I love having the two batteries and the external charger and for 25 bucks on Amazon you can't go wrong
don't be scared it's only a phone
ogd x d2g x2 gs3
old ladies ^
if you are going to root, you should have, atleast one of these three
1 spare battery
2 spare battery charger
3 Motorola Programing Adaptor by Team Black Hat
---------- Post added at 02:50 PM ---------- Previous post was at 02:48 PM ----------
Lorenzo VonMatterhorn said:
can you get into recovery? if so, it charges while in recovery.
Click to expand...
Click to collapse
BSR(DX2 system recovery) not android stock recovery
tbc
---------- Post added at 02:54 PM ---------- Previous post was at 02:50 PM ----------
3 things every Android person must have-Tomsgt123
bad bone said:
Or another battery I had my phone do the same thing ended up having to buy another battery and it was cm10 when it happened
P.S. there's a pretty good deal on anker atrix 1800mAh x2 w/ external charger I love having the two batteries and the external charger and for 25 bucks on Amazon you can't go wrong
don't be scared it's only a phone
ogd x d2g x2 gs3
old ladies ^
Click to expand...
Click to collapse
sd_shadow said:
if you are going to root, you should have, atleast one of these three
1 spare battery
2 spare battery charger
3 Motorola Programing Adaptor by Team Black Hat
---------- Post added at 02:50 PM ---------- Previous post was at 02:48 PM ----------
BSR(DX2 system recovery) not android stock recovery
tbc
---------- Post added at 02:54 PM ---------- Previous post was at 02:50 PM ----------
3 things every Android person must have-Tomsgt123
Click to expand...
Click to collapse
i see that now. my friend has his old dx im going to switch the batteries tonight. i leave for boot camp on monday so i dont have time to get something shipped.
edit: also does anyone know what "modem did not power on (2)" means
Related
Every since i did a tituatam backup my home button always viberate but it doesn't go back to home screen or anything. How can you get that to work again ? Thanks
maybe stop rooting and modding your phone if you don't know what your doing
netter159 said:
maybe stop rooting and modding your phone if you don't know what your doing
Click to expand...
Click to collapse
nah , but i'm still looking for a answer though . Thanks for helping .
just do another "tituatam backup" and it should "viberate" harder so that your phone falls of your desk, and softbreaks enabling you to reflash the rom. Your welcome.
---------- Post added at 08:30 PM ---------- Previous post was at 07:34 PM ----------
have you tried reflashing the rom again?
netter159 said:
just do another "tituatam backup" and it should "viberate" harder so that your phone falls of your desk, and softbreaks enabling you to reflash the rom. Your welcome.
---------- Post added at 08:30 PM ---------- Previous post was at 07:34 PM ----------
have you tried reflashing the rom again?
Click to expand...
Click to collapse
-_- i cant get a simple answer ? .
RazKidd said:
-_- i cant get a simple answer ? .
Click to expand...
Click to collapse
learn to read kid. I posted it above, but i'll repost it just for you.
"just do another "tituatam backup" and it should "viberate" harder so that your phone falls of your desk, and softbreaks enabling you to reflash the rom. Your welcome."
Im still trying to get over that signature......maybe if you do another "tituatam backup" while holding your home button it will remember to back that up too...
i agree,def another tititatitiiatuuuam backup. Get the new version too. If he only spent as much time thinking about what he types, he might get worthwhile responses.
first i am new and dont know a lot about software/android
i used this guide to try to flash the liquid jelly bean
androidauthority.com/galaxy-note-i717-android-4-1-1-liquid-jelly-bean-custom-rom-114126/
since the ROM download link wasnt working i downloaded it from here
android.gs/install-liquidsmooth-custom-rom-on-att-samsung-galaxy-note-i717-android-4-1-2-jelly-bean/
in the first link i followed the steps BUT forgot to do a clean/wipe the factory data
now after the flashing completed i hit reboot now and waited 6min than i tried to hold down the power button and nothing. took out battery and try to restart but nothing
how do i go back to either the reflashing or to my old ICS flashed version (using tmobile sim with forced 4g)?
My battery was full and every time i try to plug it to my pc it keeps telling me to format the sd/internal storage.
Pull battery and put back
Hold power and both volume buttons
At Samsung screen, release ONLY power
Keep holding volume, recovery will come up
Wipe data/factory reset.
Wipe cache partition
While you're at it, go to Mounts and storage - Format system
Reinstall ROM
Sent from my SAMSUNG-SGH-I717 using xda premium
---------- Post added at 03:09 PM ---------- Previous post was at 03:07 PM ----------
Added step: Pray its not bricked. Liquid likes to turn phones into good looking paper weights.
Sent from my SAMSUNG-SGH-I717 using xda premium
no response from the phone expect when i connect to pc it keep telling me to format the internal storage.
what options do i have to fix this
The phone is likely bricked ...
The link you used is likely the same one another user tried yesterday.
It's not an I717 rom....it's actually a GS3 rom, and when flashed, instantly bricks the device.
You likely need a JTAG repair on the device, as it is hard bricked with no download mode.
Very sorry, it's a bad deal...but users "must" verify rom sources before flashing...
The link you used has bricked your device....g
Someone needs to report to the writer that they're referring people to an incorrect ROM. Granted its not their fault but damn. People do whatever the internet tells them to and we already have enough "bricked" threads.
Sent from my SAMSUNG-SGH-I717 using xda premium
so just one thing
should i try the usb download mode dongle thing first or try the JTAG service and are which ones on AMAZON are compatible with att note
Concerning this issue, there is room for improvement by devs and users both.
I have to say many of the liquid items are not organized well. After so many issues due to this you would think at some point they would be cleaned up. Also while I agree folks should confirm they have the correct rom,files,etc before flashing, it takes verry little to add safeguards to a rom making it device specific so it will not flash to an unintended device.
Just my two pennies.
Sent from my SAMSUNG-SGH-I717 using xda premium
savan1221 said:
so just one thing
should i try the usb download mode dongle thing first or try the JTAG service and are which ones on AMAZON are compatible with att note
Click to expand...
Click to collapse
Sorry but your phone is history. Get $50 and send it to the JTAG guy. www.mobiletechvideo.com
rangercaptain said:
Sorry but your phone is history. Get $50 and send it to the JTAG guy. www.mobiletechvideo.com
Click to expand...
Click to collapse
Agreed....
Very sorry, but it's toast until a JTAG restore is performed.....
And I agree with the above poster that the liquid links are a mess...
This is the second brick in a day I'm aware of, and I'm looking into reporting the faulty rom.....g
---------- Post added at 06:25 PM ---------- Previous post was at 06:23 PM ----------
joe3681 said:
Someone needs to report to the writer that they're referring people to an incorrect ROM. Granted its not their fault but damn. People do whatever the internet tells them to and we already have enough "bricked" threads.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
I'm in the process of that, and would appreciate the help of others sending reports also.
The mis-labeled rom is a bad damn deal.....g
---------- Post added at 06:40 PM ---------- Previous post was at 06:25 PM ----------
I've contacted the general operations team for the site offering the rom...
I've also emailed the author of the site and asked for removal of the build..
It's really all I can do from here, as the build is hosted in Romania......g
oh man today has just been a bad luck for me
bricked my note
got two different blue screen error
burned myself while trying to shape metal
i will try to ship it to the JTAG
just one more thing do i need to get the usb dongle for $6 and also do i need to get the sim unlock.
when i bough the phone i had bough a unlocked version, will i be able to do that myself or since he is restoring it, it will need to be redone
No parts needed, and you'll likely need to unlock again..
Good luck with the note repair, and I'm sorry your day has sucked so badly.
It'll get better ...g
rangercaptain said:
Sorry but your phone is history. Get $50 and send it to the JTAG guy. www.mobiletechvideo.com
Click to expand...
Click to collapse
that link above is not valid ( unclaimed domain ?) ... closed ..
See goattamers link ..g
That link is wrong. The correct link is www.mobiletechvideos.com
bummer, sorry to hear about your phone.....seems like your best bet is jtag. check this out - http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-jtag-brick-repair/
savan1221 said:
first i am new and dont know a lot about software/android
i used this guide to try to flash the liquid jelly bean
androidauthority.com/galaxy-note-i717-android-4-1-1-liquid-jelly-bean-custom-rom-114126/
since the ROM download link wasnt working i downloaded it from here
android.gs/install-liquidsmooth-custom-rom-on-att-samsung-galaxy-note-i717-android-4-1-2-jelly-bean/
in the first link i followed the steps BUT forgot to do a clean/wipe the factory data
now after the flashing completed i hit reboot now and waited 6min than i tried to hold down the power button and nothing. took out battery and try to restart but nothing
how do i go back to either the reflashing or to my old ICS flashed version (using tmobile sim with forced 4g)?
My battery was full and every time i try to plug it to my pc it keeps telling me to format the sd/internal storage.
Click to expand...
Click to collapse
I recently just went through the same exact thing, downloaded the same link and BOOM.......nice paper weight! But since my phone is from AT&T and I am in my first year, i just took it to the service center and they replaced it without asking any questions. Not sure where you live , but try the service center, not saying it's a guarantee, but maybe , just maybe, you'll get lucky
jrea77 said:
bummer, sorry to hear about your phone.....seems like your best bet is jtag. check this out - http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-jtag-brick-repair/
Click to expand...
Click to collapse
So many URLs....so little time ....
This "is" the right one now ....g
---------- Post added at 05:06 PM ---------- Previous post was at 05:05 PM ----------
Agoattamer said:
That link is wrong. The correct link is www.mobiletechvideos.com
Click to expand...
Click to collapse
yup ....you got it ..
Thanks GT ....g
Sucks these things happen during the holidays.
. . . Or any time. But "things" didn't go wrong, although that is the first time I heard of a bad link.
TechGoon954 said:
I recently just went through the same exact thing, downloaded the same link and BOOM.......nice paper weight! But since my phone is from AT&T and I am in my first year, i just took it to the service center and they replaced it without asking any questions. Not sure where you live , but try the service center, not saying it's a guarantee, but maybe , just maybe, you'll get lucky
Click to expand...
Click to collapse
And what you did here and what you are recommending is fraud. You voided the warranty when you rooted it and flashed a custom rom to it. I wouldn't say you got lucky I would say you cheated the system
i just replaced my screen in my evo 3d for the second time after getting a faulty replacement and not i seem to be stuck in a boot loop. i had it booting 100% fine before i put in the new screen so i have no idea whats wrong with it. i grounded myself for the whole process so i really dont think i fried anything and i was careful with reassembling it as usual. but now it just gets stuck at the white htc screen ive tried flashing it with fast boot, and ive tried flashing it with the ruu which installed completly but its still stuck in the loop is there anything else i can try.
Is the screen from HTC or some cheap China knock off brand?
DjDom said:
Is the screen from HTC or some cheap China knock off brand?
Click to expand...
Click to collapse
LOL!
HTC is in China, a.k.a. Taiwan.
ramjet73
DjDom said:
Is the screen from HTC or some cheap China knock off brand?
Click to expand...
Click to collapse
its a screen i got out of another evo 3d that wouldnt power on
I am experiecing the exact same issue 1.40 hboot, s-off revoloutionary... Phone was fine aside from the digitizer touching itself randomly. Just replaced screen and can only get into bootloader, otherwise just bootloop. Have 4ext recovery, can not boot into it.
Can you flash pg86img's?
Maybe you should try the ruu
Sent from my PG86100 using xda app-developers app
Suggested ruu? I have not flashed one ever.
---------- Post added at 10:02 PM ---------- Previous post was at 09:49 PM ----------
I am changing back to my old screen to see if its just something crazy with the replacement used one I got. I also tried flashing the boot.img from the rom I am running with no success. Will post back after swapping old screen back in.
---------- Post added at 10:14 PM ---------- Previous post was at 10:02 PM ----------
It is booting...WTH... Is it a potential driver mismatch with my old radio and hboot version, or is this screen just a piece of crap?
mcss86 said:
Suggested ruu? I have not flashed one ever.
---------- Post added at 10:02 PM ---------- Previous post was at 09:49 PM ----------
I am changing back to my old screen to see if its just something crazy with the replacement used one I got. I also tried flashing the boot.img from the rom I am running with no success. Will post back after swapping old screen back in.
Click to expand...
Click to collapse
Hello everyone and all.
So I wanted turned on my evo 3D {out of warranty of 2 years +}.
It is root , s-off, rom cuistom and cuistom recovery.
*It is not starting , blinking. (no LED is lit (no red lighting))
I tried to load it. (It is not loaded).
I exchange the batteries (it was not turned on and loaded.)
I connected to Windows PC with and without battery, it is recognized as qhsdload usb.
I connect Ubuntu to attempt to débrick , it is not recognized. and the two xda softwares (unbriking project and universal) showed (waiting for devices, and no device found).
*
*
(It is not recognized in adb in windows)
What is the solution to make it started?
*
*
Regards
Same thing here. Please some God help me and this guy. Now i must use this crappy trollphone
Sent from my GT-S5570 using xda app-developers app
vojtadohnal349 said:
Same thing here. Please some God help me and this guy. Now i must use this crappy trollphone
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
dlnraja said:
Hello everyone and all.
So I wanted turned on my evo 3D {out of warranty of 2 years +}.
It is root , s-off, rom cuistom and cuistom recovery.
*It is not starting , blinking. (no LED is lit (no red lighting))
I tried to load it. (It is not loaded).
I exchange the batteries (it was not turned on and loaded.)
I connected to Windows PC with and without battery, it is recognized as qhsdload usb.
I connect Ubuntu to attempt to débrick , it is not recognized. and the two xda softwares (unbriking project and universal) showed (waiting for devices, and no device found).
*
*
(It is not recognized in adb in windows)
What is the solution to make it started?
*
*
Regards
Click to expand...
Click to collapse
I have all the symptons but i DO NOT get the "qhsdload usb".. weird how it happened installed CM10.1 with latest firmware everything was fine for an hour till i was listening to music on my way home from jogging it just "DIES" on me battery was still 98% and it would not turn on after that... No LED, recovery , bootloader, wont charge , wont turn on, and especially no "qhsdload usb" issue.
makes me wonder what happened...
---------- Post added at 12:25 PM ---------- Previous post was at 12:12 PM ----------
I just ordered a motherboard replacement should be coming in tomorrow.. hopefully it will turn on after i replace it
the1youknew said:
I have all the symptons but i DO NOT get the "qhsdload usb".. weird how it happened installed CM10.1 with latest firmware everything was fine for an hour till i was listening to music on my way home from jogging it just "DIES" on me battery was still 98% and it would not turn on after that... No LED, recovery , bootloader, wont charge , wont turn on, and especially no "qhsdload usb" issue.
makes me wonder what happened...
---------- Post added at 12:25 PM ---------- Previous post was at 12:12 PM ----------
I just ordered a motherboard replacement should be coming in tomorrow.. hopefully it will turn on after i replace it
Click to expand...
Click to collapse
Where did you order that motherboard?
I think I will do it myself too.
Thanks in advance!
Have to RMA my hdx 7".. the light bleed is just insane, like 1/2" of blue around the sides of the screen.
Anyway... it has safestrap installed with 2 slots setup.. Could someone give me a quick rundown on the safe way to restore this to 100% stock? I did a quick search but fail at search. thank you
Icetech3 said:
Have to RMA my hdx 7".. the light bleed is just insane, like 1/2" of blue around the sides of the screen.
Anyway... it has safestrap installed with 2 slots setup.. Could someone give me a quick rundown on the safe way to restore this to 100% stock? I did a quick search but fail at search. thank you
Click to expand...
Click to collapse
I was dealing with a similar situation. Here are the steps to restore it to 100% stock.
I am not sure if you would need to delete manually the ROM slot you created first, but I assume not. I did, just to be safe. It might be my OCD though.
---------- Post added at 02:38 PM ---------- Previous post was at 02:23 PM ----------
Icetech3 said:
Have to RMA my hdx 7".. the light bleed is just insane, like 1/2" of blue around the sides of the screen.
Click to expand...
Click to collapse
Oh, I forgot to ask. Any chance that you could post a picture of your screen that shows the bleeding? I would like to compare it to mine. I have it too, but I am not sure if it's worth the trouble going through the replacement as many people report that their second or third replacement has it too. I wanna see how bad it yours.
Kindlik said:
I was dealing with a similar situation. Here are the steps to restore it to 100% stock.
I am not sure if you would need to delete manually the ROM slot you created first, but I assume not. I did, just to be safe. It might be my OCD though.
---------- Post added at 02:38 PM ---------- Previous post was at 02:23 PM ----------
Oh, I forgot to ask. Any chance that you could post a picture of your screen that shows the bleeding? I would like to compare it to mine. I have it too, but I am not sure if it's worth the trouble going through the replacement as many people report that their second or third replacement has it too. I wanna see how bad it yours.
Click to expand...
Click to collapse
Thanks.. will try it today, sorry for the late response.. busy weekend...
Ended up just going into recovery, deleting my slot2 which had the modified OS.. booted to slot 1 which was stock. remove Safestrap, did a refresh to wipe user data.. and back to amazon it goes
Icetech3 said:
Thanks.. will try it today, sorry for the late response.. busy weekend...
Ended up just going into recovery, deleting my slot2 which had the modified OS.. booted to slot 1 which was stock. remove Safestrap, did a refresh to wipe user data.. and back to amazon it goes
Click to expand...
Click to collapse
New HDX just showed up... same light bleed, must just be how they are.. I really like the devices other than the battery life is total ass.. my nexus 10 goes a week on a charge this thing wont make it 2 days on standby
Icetech3 said:
New HDX just showed up... same light bleed, must just be how they are.. I really like the devices other than the battery life is total ass.. my nexus 10 goes a week on a charge this thing wont make it 2 days on standby
Click to expand...
Click to collapse
that doesn't sound right at all. i can leave my 7" laying around for days without it dying, unless i've been using the hell out of it. i had one problem with bluetooth keeping it awake, and i turned bluetooth off and rebooted and it hasn't happened again
murso74 said:
that doesn't sound right at all. i can leave my 7" laying around for days without it dying, unless i've been using the hell out of it. i had one problem with bluetooth keeping it awake, and i turned bluetooth off and rebooted and it hasn't happened again
Click to expand...
Click to collapse
Well.. the replacement i got, all i have done is install moon reader and dropbox and a few other apps (i actually like the amazon OS once i can sideload things and get dropbox on it) And standby is 3 days.. i came in to work today it was at 4%.. so its better than my last one. but still same monster light bleed and stuff.. no big thing i don't use this much. My old nexus 10 is still the best i have used. and front speakers. mmmmm
weird..on standby mine lasts a lot longer than that