Sorry if this issue has already been posted, I am new to this website.
So I just purchased a Lumia 920 from Rogers and unlocked it to use on Telus.
Unfortunately, I had no idea that these phones had so many problems when trying to put them onto a new carrier.
Im getting problems such as:
Tethering Issues
LTE Connectivity Issues
Map downloading Issues
Unable to activate my nokia account through the phone
Now, I have managed to find solutions to most of these problems, but they do not always work. I have solved these issues with some of the most common solutions like:
Using the Access Point setting
setting isp.telus.com as the APN
manually setting all MMS/APN settings
What I want to know is:
Are any of the available ROMs on navifirm plus "Unaltered"?
And has anyone been successful at solving these common problems with any of the ROMs?
Also, on a side note, when I try to install Nokia Care Suite 5.0 I get Error 1723, I have not found any solution to this as of yet (could it be that I am running windows 8?).
*************************************FOUND SOULUTION*****************************************************************************
Basically i decided to try flashing my Lumia over to an RM-821 international developer version (1232.5951.1249.1002).
There is another dev version available on navifirm (1232.2110.1244.3002), didn't try this one.
Had to follow the steps in this thread: http://forum.xda-developers.com/showthread.php?t=2112674
After a painstakingly long process, and worrying whether i would brick my phone going from RM-820 to RM-821 it seems to now be working.
- The APN settings are now configured automatically by the phone (dont need access point app anymore)
- MMS can now be received without problems
- Ugly Rogers boot logo is gone
- phone now displays H+ instead of 4G
- Tethering works flawlessly
Some issues remaining:
- cannot add my nokia account to my phone (had this issue before, was very hit and miss sometimes you could, sometimes you couldnt)
- unable to recieve LTE anymore, the cellular options show a maximum speed of 4G, ill keep you guys updated on this tomorrow as i had this issue before and just had to go downtown and then it magically started working.
Ill keep everyone posted
UPDATE****************************
LTE works fine, I was also able to add my Nokia account (only with high LTE reception).
however, my MMS issues are only half fixed. Can't receive any MMS from wind mobile users (Rogers, bell, Telus work fine.)
You are not going to get LTE service on that the 920 as long as you are using Telus. The LTE Frequencies for the Lumia are 850/1900. Telus uses 800/1800. The frequencies are hardware controlled and cannot be altered. Not even a new or different ROM will solve this issue as it is hardware related.
Solarenemy68 said:
You are not going to get LTE service on that the 920 as long as you are using Telus. The LTE Frequencies for the Lumia are 850/1900. Telus uses 800/1800. The frequencies are hardware controlled and cannot be altered. Not even a new or different ROM will solve this issue as it is hardware related.
Click to expand...
Click to collapse
I actually did manage to get LTE running on telus. It just doesnt seem to like working when im in doors or away from the heart of down town toronto. But it IS working.
That still leaves my other issues though. I kind of gave up on the phone. Been trying to sell it ever since which is a shame because its a nice phone.
Too bad nobody is interested in a barely touched unlocked lumia for more than 350 bucks.
I did very recently unlock my ATT Lumia 920 and I'm using Telus. I'm considering flashing a European Dev ROM, but I'm wondering if I will be able to get LTE working. Can you please more specifically mention the steps you used to get LTE to work?
---------- Post added at 01:58 PM ---------- Previous post was at 01:56 PM ----------
Solarenemy68 said:
You are not going to get LTE service on that the 920 as long as you are using Telus. The LTE Frequencies for the Lumia are 850/1900. Telus uses 800/1800. The frequencies are hardware controlled and cannot be altered. Not even a new or different ROM will solve this issue as it is hardware related.
Click to expand...
Click to collapse
That's not correct. According to wikipedia, Rogers uses bands 4 (1700 MHz) and 7 (2600 MHz) for LTE, Telus supports the only LTE band 4 (1700 MHz). Thus technically everything should just work out of the box.
Related
I have been around the forum for many years now, but am new to Android. I purchased a GT-i9100 in India for work travel between US and there. I have rooted and upgraded to 2.3.4, and applied a new kernel to remove the exclamation point. So, with that said, here is my question:
I am in the US right now, and in an area supported by T Mobile HSPA, but the phone will only connect to Edge. I am PRETTY sure it was only connecting to Edge before I did the work, but I cannot be sure. Would there be anything I did to the phone that would prevent it from getting onto the "4G" network? Is there anything I need to do now to change so it can connect?
I am not sure if this is related either, but I have a Verizon LTE data card, and if I place that SIM in the GT-i9100, it won't recognize it at all. It seems to only see T Mobile and ATT in the US.
I have spoken to T Mobile and they confirmed the 4g availability where I am, and they also reset my network connection, so the issue does not appear to be on my account or with TMobile.
Sorry for the long post, but I have been searching around and can't seem to get my small mind around resolution.
The SGS2 does not work with T-Mobile's 4G bands here in the US. If you want 4G you'll need AT&T.
dvinnola said:
Sorry for the long post, but I have been searching around and can't seem to get my small mind around resolution.
Click to expand...
Click to collapse
That's because there is no resolution. As stated in several other threads on these forums (learn to do a search, and there's even one on the main page of Q/A right now) THERE IS NO WAY to get 3G on T-Mobile. The hardware in the phone does not support their 1700MHZ band.
Your 2 options:
1. Buy a T-Mobile phone
2. Switch to AT&T
Im thinking about jumping ship from android (evo 4g) to the titan. One of the biggest things holding me back is the ability to tether for free via USB and wifi with android. Is this an option with the titan?
Russellhi said:
Im thinking about jumping ship from android (evo 4g) to the titan. One of the biggest things holding me back is the ability to tether for free via USB and wifi with android. Is this an option with the titan?
Click to expand...
Click to collapse
I have the unlocked UK version of the phone and it does have Internet Connection Sharing in settings for sharing via wifi. Not sure if other versions of the phone will have it. AT&T phones will probably come with it locked down, not sure if unlocking the phone will also allow access to Internet Connection Sharing.
Thanks for the info. Hopefully unlocking the phone will let me tether it. I'm going to wait and see if it works before I buy it.
Would also love some more info. Was able to stealth-tether with my Focus without unlocking/jailbreaking, and that was super-handy since I do it so rarely and don't want to have to add it to my plan...
Now the Focus is dead and I'm 99% likely to be purchasing a Titan tomorrow.
drokkon said:
Would also love some more info. Was able to stealth-tether with my Focus without unlocking/jailbreaking, and that was super-handy since I do it so rarely and don't want to have to add it to my plan...
Now the Focus is dead and I'm 99% likely to be purchasing a Titan tomorrow.
Click to expand...
Click to collapse
Looks like expansys is carrying the us version now with the hspa+ 850,1900,2100 bands. That one looks non carrier branded so it should work with internet connection sharing. Really curious if someone has a AT&T Titan they have unlocked that allows ICS.
win7463 said:
Looks like expansys is carrying the us version now with the hspa+ 850,1900,2100 bands. That one looks non carrier branded so it should work with internet connection sharing. Really curious if someone has a AT&T Titan they have unlocked that allows ICS.
Click to expand...
Click to collapse
I have it unlocked on Telus. Just tried the internet sharing and funny enough it still says to contact ATT or dial 611 lol.. So I'm with Telus yet I need to contact ATT?? Right..
I have SIM-FREE UK version and can tether on Giffgaff gigabags. No issues at all. No jailbreaking needed, no unlocking of any sorts.
Sounds like the conclusion here is the unlocked unbranded version is okay to to use Internet Sharing.
AT&T locked or unlocked (like me) you are out of luck.
However I'm curious who can actually unlock this feature for an unlocked ATT model. Your current carrier? ATT directly? HTC?
Or are you just screwed?
pistol44 said:
Sounds like the conclusion here is the unlocked unbranded version is okay to to use Internet Sharing.
AT&T locked or unlocked (like me) you are out of luck.
However I'm curious who can actually unlock this feature for an unlocked ATT model. Your current carrier? ATT directly? HTC?
Or are you just screwed?
Click to expand...
Click to collapse
But do you mean that you don't have this ICS option in your settings list?
or does turning ICS on, doesn't do anything?
drupad2drupad said:
But do you mean that you don't have this ICS option in your settings list?
or does turning ICS on, doesn't do anything?
Click to expand...
Click to collapse
Not sure what you mean...
I do have the Internet Sharing option is settings.
When I turn it on it says "Connection not shared - To enable tethering on this device, go to att.com/mywireless or dial 611"
It's unlocked and not on ATT.
pistol44 said:
Not sure what you mean...
I do have the Internet Sharing option is settings.
When I turn it on it says "Connection not shared - To enable tethering on this device, go to att.com/mywireless or dial 611"
It's unlocked and not on ATT.
Click to expand...
Click to collapse
oh I meant Internet Connection Sharing.
It more looks like its your SIM that might not be compatible to tether on titan? When I turn it on, it shows me devices I can pair with and then it needs connection using passcode.
drupad2drupad said:
oh I meant Internet Connection Sharing.
It more looks like its your SIM that might not be compatible to tether on titan? When I turn it on, it shows me devices I can pair with and then it needs connection using passcode.
Click to expand...
Click to collapse
Oh, well I assume you're not using an unlocked ATT Titan? I know the unbranded model has no issues with internet sharing.
I was trying to get tethering working as well (at&t titan on Rogers) i phoned around and the HTC rep said tethering needs to be added onto my account. I have a 6GB data plan that does not include tethering (i know rogers says anything over 1GB has it but technically my account does not include it). The Rogers Rep said i would need ot go down to a 1GB plan for them to addon tethering to my account and then the phone should authenticate and work.
Is anyone here able to test that out and confirm?
---------- Post added at 03:22 AM ---------- Previous post was at 03:20 AM ----------
my current theory is that the at&t phone actually authenticates back to the carrier to verify tethering is added onto the account rather than just sharing out its current internet connetion.
if anyone can test and get back to us it might be helpfull
averma said:
I was trying to get tethering working as well (at&t titan on Rogers) i phoned around and the HTC rep said tethering needs to be added onto my account. I have a 6GB data plan that does not include tethering (i know rogers says anything over 1GB has it but technically my account does not include it). The Rogers Rep said i would need ot go down to a 1GB plan for them to addon tethering to my account and then the phone should authenticate and work.
Is anyone here able to test that out and confirm?
---------- Post added at 03:22 AM ---------- Previous post was at 03:20 AM ----------
my current theory is that the at&t phone actually authenticates back to the carrier to verify tethering is added onto the account rather than just sharing out its current internet connetion.
if anyone can test and get back to us it might be helpfull
Click to expand...
Click to collapse
I'd be surprised if that actually worked. However I have speculated a way that should allow unlocked ATT branded Titan users like us to be able to use Internet Sharing. Sadly this won't be an option until the next MS Windows Phone update is rolled out. I'll explain..
When I had my HD7 it was T-Mobile branded unlocked on Wind Mobile. At first it was filled with all kinds of T-Mo apps etc and similarly locked to T-Mo within the OS. But once the updates starting rolling out from MS I forced them to my phone rather than waiting for T-Mo and it essentially made it become unbranded. The Internet Sharing feature was available as an update on my HD7 when the unbranded models received theirs and it was fully functional. So whenever MS rolls out whatever next update there is forcing it to our Titans should make it fully unbranded and at the same time unlock our Internet Sharing feature.
I'm with At&t and can verify that once I switched my plan from unlimited to "4g with tethering" I've been able to use Wifi Sharing. In fact i'm using it right now.
I think it's a value in the registry to check or not. We'll see once we can edit it.
Sent from my PI39100 using Board Express
Add me to the list of ppl curious how to do it for free. I very rarely use the option, but I'd like it nonetheless...
Titan on Rogers
I have an AT&T branded Titan unlocked running on Rogers. I had a 1GB plan without tethering and I was getting teh same issue when I tried to enable tethering. So, I phoned Rogers and now I have a 6GB plan which has tethering enabled.
Restarted my phone, same issue.
I think that in order for this to work either I have to update the phone so that it is unbranded (how would I do this?) OR there is a registery key or file that needs to be changed so that the check to the carrier no longer happens.
Hmmmmm....
I think i know what needs to be done. My buddy has a Samsung Focus Flash from At&t (forgot to check but i assume it would give him the same At&t tethering message we're all getting).
Anyways we interop unlocked it and pushed the wifi tethering patch for WP7 and my guess it overwrote the At&t lockdown because he is able to tether without any issues.
Good news is we can get it working - bad news we have to wait for someone to interop unlock the Titan - which so far hasn't been done
This whole thing with tethering is flat getting old. We should have it std on the phone if we have an unlimited plan like I do and some of the others do. This sucks and is a good reason to take our business elsewhere where the feature is included.
I really don't use it much but that is not the point.
Okay, I'm done ranting and raving about this and I am back to normal.
Hello Guys,
I am so desperate and frustrated, hope you can help me!
I dropped my phone from 2 stairways height.
It was working so i didnt care, but when I came home I noticed that I had no reception!
So as I have bought the phone from Germany Amazon.com and using it in Turkey, I had no warranty (even if it said I have!!) I decided to open my SGS2 (I9100) and see if anything was loose. I lifted the pins that touched the middle housing and now I have reception for phone calls all the time thanks God!
But I have no 3G at all, what happens is that is some times shows G in the status bar but never with a + sign near it. I saw + sign only once or twice in the last couple of months.
I called my operator which is Turkcell and they said that my contract is on 3G so no chance on that side. The wierd think is that my phone works with no other SIM card than mine which is 5 years old!
Can anybody help in order to solve my problem? Is there a diagnoses tool that will help me test my SGS2 in order to find the errors?
Thanks for reading guys, I'd really appreciate some help.
Hmm I'd check my APN settings first, make sure they didn't randomly change for some reason. If that failed, I'd factory reset. If that failed I'd flash a new firmware+kernel+modem, and check my APN settings again.
If that failed I'd open it up again, disconenct and clean the antenna wire, reattach and hope for the best.
If that failed I'd suss out what is the most appropriate looking part/area of parts to replace, then replace it with either that specific part, or a pre-assembled part with the surrounding parts attached.
If that didn't work I'd list it on ebay as clearly stating the phone is damaged, outlining the problem and sell it "for parts only". Lots of people pay good money for damaged smartphones. Just make sure any sensitive data/pictures etc have been securely removed before selling it.
The problem with reception was fixed with lifting the pins that touched the middle housing but, stand by :
I think I never had 3G since I bought that phone from Germany.
I feel so stupid!
I read through more and more and I found that article:
androidforums.com/samsung-galaxy-s/258859-how-enable-850mhz-3g-network-frequency-your-samsung-i9000-galaxy-s.html
It mentioned about the modem frequencies so gave it a try.
dialed the number * # * # 1 9 7 3 2 8 6 4 0 # * # * as stated and bingo!
My modem doesnt list GSM 2100 which is the deault frequency for 3G in Turkey!
But the article doesnt mention how I can ADD GSM 2100 from the menu that dialing that number took me.
Any help with this is appreciated!
First, that article is for am i9000, which is the S1. But that's largely irrelevant because the service menu code still works.
Second, this phone doesn't get GSM 2100. Never has. It gets WCDMA/UMTS 2100. GSM is for voice and 2g, WCDMA is for 3g/HSPA. Looks like you went to the wrong option. (GSM, instead of WCDMA, like the article said.)
Third, you CAN'T add frequencies, on that menu or otherwise.
Thanks.
So why is that my phone connects with only Edge?
Can this be a hardware problem where everything else works?
Maybe these setting are wrong? Or maybe it has a SIM lock? but it works with Turkcell
Is there any manual so that I can these settings_
berkcan1 said:
Thanks.
So why is that my phone connects with only Edge?
Can this be a hardware problem where everything else works?
Maybe these setting are wrong? Or maybe it has a SIM lock? but it works with Turkcell
Is there any manual so that I can these settings_
Click to expand...
Click to collapse
You said above you don't think you ever had 3g. Maybe your carrier uses 3g frequencies this phone simply doesn't receive.
For example, this phone well never get a 3g signal on T-mobile USA's network, because the phone doesn't receive 1700 UMTS/WCDMA. This is one of two required bands on AWS... Which is the band T-mobile USA uses for 3g and "4g". If your carrier uses AWS for 3g, it won't work on their network either.
ctomgee said:
You said above you don't think you ever had 3g. Maybe your carrier uses 3g frequencies this phone simply doesn't receive.
For example, this phone well never get a 3g signal on T-mobile USA's network, because the phone doesn't receive 1700 UMTS/WCDMA. This is one of two required bands on AWS... Which is the band T-mobile USA uses for 3g and "4g". If your carrier uses AWS for 3g, it won't work on their network either.
Click to expand...
Click to collapse
No this is not possible. Turkcell is using 2100 Hz.
I have bought 3 phones from amazon.de site. The other 2 phones are working.
I have to get my settings set properly, to make sure its a faulty product, so that I can return it.
There are menu options like HSPA revision, GCF, bank selection, service domain, acquisiton order etc..
Where can I find what they have to be?
berkcan1 said:
No this is not possible. Turkcell is using 2100 Hz.
I have bought 3 phones from amazon.de site. The other 2 phones are working.
I have to get my settings set properly, to make sure its a faulty product, so that I can return it.
There are menu options like HSPA revision, GCF, bank selection, service domain, acquisiton order etc..
Where can I find what they have to be?
Click to expand...
Click to collapse
In that case, just go back to that service menu, debug screen - phone control - network control - band selection. Make sure this is selected to automatic. You can make sure all available bands for this phone are selected on in combi bands. If they're all selected on, then it sounds like it could be a hardware issue.
EDIT to add: OR it could be a modem issue. Maybe try flashing different modems?
Turn back time and don't drop it
Sent from my GT-I9100 using xda premium
Hi folks,
I've got an unlocked HTC One Max which I bought SIM free from Amazon UK. I'm using Three as my network provider in the UK and they've begun rolling out 4G to Glasgow where I live. One of my colleagues is also on Three with a Samsung Galaxy S4 and he started picking up a 4G signal this morning in the office whereas I'm still only seeing 3G. We had a poke around on our respective phones and in the Mobile Network Settings under Network Mode he's got more options than I do, including one for LTE. I've only got two options: WCDMA only and GSM/WCDMA auto. Without being able to select an LTE option in here I don't see how I'm ever going to pick up a 4G signal. Does anyone know why I'm seeing no LTE option in here and how I go about sorting that?
Okay, so I did a live chat with an HTC rep who confirmed that if there's not LTE option available in the settings then I've got the 3G only variant of the handset. I've no idea why HTC would even sell a 3G variant in the UK as it makes no sense at all, but I looked on Amazon and they only sell a single variant of the phone (which is definitely the one I bought) and curiously the listing for it doesn't clarify either way which network protocols it supports. I even tried Googling the product number (99HWN005-00) but I can't find any solid information about which version of the phone that represents. I'm hoping here that it's just a mistake and I should've been sent the proper 4G variant but it's impossible to say for sure when the Amazon listing gives no info at all about what they think they're actually selling. Either way I'll still be trying to get Amazon to take some amount of responsibility here because I think I made a fair assumption that I'd be buying the 'proper' version of the phone from them; especially as there's nothing on their site to tell me otherwise. I suppose it'll be down to how seriously Amazon take customer service as to how far I get with them. God damn it!
Grrrr. So I did another live chat with HTC to try and find out more about which models they sell in the UK. The Amazon listing has a model number and I was hoping HTC would tell me that's the model number for the LTE variant so I could go back to Amazon to say they'd mis-sold me the wrong version. This time though I got a different story; the HTC rep told me my handset is definitely LTE capable and what options you see for networking are tied to what the SIM card is capable of. His assertion was that Three had given me a 3G only SIM card and getting that sorted would fix it.
However, I swapped SIM card with my colleague who's getting a 4G signal from Three and it made no difference on my handset; I still only got the same 3G network options and, of course, only got a 3G signal. It also occurs to me that I checked with another colleague this morning who's got an HTC One but only on a 3G contract with O2 and he's already got the LTE network options (although he only ever gets a 3G signal of course).
So, yeah, this second call to HTC was a load of nonsense. Excellent. Back for a third time I go...
Medulla said:
Grrrr. So I did another live chat with HTC to try and find out more about which models they sell in the UK. The Amazon listing has a model number and I was hoping HTC would tell me that's the model number for the LTE variant so I could go back to Amazon to say they'd mis-sold me the wrong version. This time though I got a different story; the HTC rep told me my handset is definitely LTE capable and what options you see for networking are tied to what the SIM card is capable of. His assertion was that Three had given me a 3G only SIM card and getting that sorted would fix it.
However, I swapped SIM card with my colleague who's getting a 4G signal from Three and it made no difference on my handset; I still only got the same 3G network options and, of course, only got a 3G signal. It also occurs to me that I checked with another colleague this morning who's got an HTC One but only on a 3G contract with O2 and he's already got the LTE network options (although he only ever gets a 3G signal of course).
So, yeah, this second call to HTC was a load of nonsense. Excellent. Back for a third time I go...
Click to expand...
Click to collapse
Perhaps the variant you purchased does not support the lte bands that your carrier is using. That's usually the difference between the variants....radio support.
Sent from my HTC6600LVW using Tapatalk
dottat said:
Perhaps the variant you purchased does not support the lte bands that your carrier is using. That's usually the difference between the variants....radio support.
Sent from my HTC6600LVW using Tapatalk
Click to expand...
Click to collapse
Even if that was the case I would still need to see the option in the settings to turn on LTE; I don't even have that option so regardless what bands my carrier is using my phone wouldn't pick up a 4G signal of any kind.
I've basically somehow ended up with a 3G only variant of the phone which frankly they shouldn't even be selling because there's no point. I might ping HTC again with a more direct question but they don't seem to be able to tell me what I've got so it's more likely I'll just go back to Amazon and see what they have to say about it.
Also I did a quick check and Three are using the 800 MHz band which the 4G version of the HTC One definitely supports.
Okay, so, I sort of got it fixed but it's a really stupid situation. There's a key code to get into a hidden setting menu on Android (*#*#4636#*#*) which bypasses the normal options and allows you to force the network mode to any of the ones Android itself supports; so it's got all sorts of weird **** like EVDO and whatever in there. I went in there and forced on 'LTE only' mode and now I can pick up 4G if I stand in certain parts of the office. I've put it to 'GSM/WCDMA/LTE auto' and it should now go up to 4G whenever it gets a strong enough signal and work as it should. Why I've had to do that hack to get it working, and why the normal user level UI doesn't expose the LTE related options, is a ****ing mystery though. With KitKat rolling out that might might sort it but I shouldn't need an OS update to expose functionality the hardware's already capable of. It's really ****ing stupid all in and not doing HTC's rep any favours with me as I'll probably have to repeat the same stupid hack every time I reboot the phone.
Does anyone out there have the IMAN i3 from China working with AT&T? We were able to get the phone working with voice/text with no issues, but the data will not flow. Not really sure what the problem is. We've tried manually programming the APN to get it to work and it doesn't seem to help. Any advice would be great. Even if it's an APN you know works. Thanks guys!
According to the specs of the phone, it will not get 3G here in the US. It is odd that Edge isn't working though. I'm assuming you did make sure that data is enabled? (sorry, but it's been known to happen...) The tricky thing is that there are a handful of different APN configurations out there and some work better on certain devices and/or updates than others and maybe even location dependent for some. Check out this thread to see what I mean:
http://forum.xda-developers.com/showthread.php?t=2172110
I would try some of those and see what happens...
es0tericcha0s said:
According to the specs of the phone, it will not get 3G here in the US. It is odd that Edge isn't working though. I'm assuming you did make sure that data is enabled? (sorry, but it's been known to happen...) The tricky thing is that there are a handful of different APN configurations out there and some work better on certain devices and/or updates than others and maybe even location dependent for some. Check out this thread to see what I mean:
http://forum.xda-developers.com/showthread.php?t=2172110
I would try some of those and see what happens...
Click to expand...
Click to collapse
Yeah, data was enabled. I even swapped out with a T-Mobile SIM, which at least get Edge service, and it worked. I tried a few different APN configurations and it finally at least got Edge. That sucks we can't get 3G though. I take it that this is going to be the case for most phones coming out of China?
ljzrelak said:
Yeah, data was enabled. I even swapped out with a T-Mobile SIM, which at least get Edge service, and it worked. I tried a few different APN configurations and it finally at least got Edge. That sucks we can't get 3G though. I take it that this is going to be the case for most phones coming out of China?
Click to expand...
Click to collapse
Yes. As they use different bands for data then in the states.
zelendel said:
Yes. As they use different bands for data then in the states.
Click to expand...
Click to collapse
True, but there are plenty of Chinese companies that have expanded their offerings to include phones that can get HSPA here.
OP: When you are searching for phones, the main thing you need to check for for data compatibility is that the phone uses the 1900 Mhz freq for WCDMA or HSPA. Pretty much every phone will say that it uses 1900, but you have to check to see if it is only listed for 1900 under GSM (which will be the 2g or Edge data) or if it's listed there and for 3g/WCDMA/HSPA/UMTS (these are often used interchangeably on many sites).
Take for instance, the lineup of phones from the company BLU (they rebadge some Chinese phones to sell in North and South America and add a few of their own touches). They have 2 series for each line of phones - one ending in "i" and one in "a". Same phone, just have different data bands enabled. "i" is for International and "a" is sold in the States and gets our type of 3g.
ljzrelak said:
Does anyone out there have the IMAN i3 from China working with AT&T? We were able to get the phone working with voice/text with no issues, but the data will not flow. Not really sure what the problem is. We've tried manually programming the APN to get it to work and it doesn't seem to help. Any advice would be great. Even if it's an APN you know works. Thanks guys!
Click to expand...
Click to collapse
Hi friend! do u have stock firmware? I need very much!