My lumia has died and I tried to charge it using the wireless charger and a walmart universal charger (that has charged all my android and blackberries) but it turns on and I see the at&t logo then a blinking battery logo then it goes to a nokia logo and stays there. Can anyone help?
Sent from my GT-P3113 using xda app-developers app
Connect the phone to a wall outlet and leave it for 2-3 hrs to charge, then, try to connect it to ur computer. If u can, do a reflash process, and hopefully that will help.
Well I plugged it in. It looked like it was charging for a moment then after a couple of minutes, it went to the black nokia screen...
Sent from my GT-P3113 using xda app-developers app
This Phone requires a charger that is capable of putting out 2 amps. Standard generic chargers do one amp at best. You must use the wall charger that came with the phone if the phone completely dies. The wireless charger will not work if you allow the battery to completely die at which time you must use the provided charger the phone came with.
Solution Found!
You need the Nokia Software Updater for Retail to flash the latest firmware to your Nokia phone. There are many website that advertise this software but all of the ones I have found require registration or the downloading some additional software.
You can download the working retail version 2.0.6 (I am not allowed to post the link, but try jkorondy period com forward slash Lumia920) -- without registration and without any additional garbage software. It will update itself to 3.0.4 (or the most current version). I have run it on Windows 8 and Windows 7, connected to my unlocked Lumia 920 (RM-821_apac_philippines_388) and it works great. Firmware updated and it hasn't shut down since! :laugh:
Same problem with Lumia 620
Hi my Nokia Lumia 620 too has died. I used to charge the phone with PC by connecting via USB cable provided by Nokia. One day it simply went dead. It would switch on show the Nokia Logo and the low battery sign after that blank. I went to Nokia care the same day and after 1-2 Hours they said its IC has to be repaired which costs about half the price of the phone. I refused it for the time being till I get a better solution than that and also now it wont even show the Nokia logo.It just vibrates when press the power button. The only thing I could think of that would have caused the problem is voltage fluctuations at my location. But still didn't think it would be much of an issue since I used to charge via PC only. Any kind of help would be great!! Else will be dropping it by the Nokia Recycle center.
zuhairh said:
Hi my Nokia Lumia 620 too has died. I used to charge the phone with PC by connecting via USB cable provided by Nokia. One day it simply went dead. It would switch on show the Nokia Logo and the low battery sign after that blank. I went to Nokia care the same day and after 1-2 Hours they said its IC has to be repaired which costs about half the price of the phone. I refused it for the time being till I get a better solution than that and also now it wont even show the Nokia logo.It just vibrates when press the power button. The only thing I could think of that would have caused the problem is voltage fluctuations at my location. But still didn't think it would be much of an issue since I used to charge via PC only. Any kind of help would be great!! Else will be dropping it by the Nokia Recycle center.
Click to expand...
Click to collapse
Use the wall charger that came with the phone... If it is completely dead it requires 2 amps to charge and the PC cannot supply that kind of current nor can the wireless charger.
Related
I went away for xmass, and the last thing I did before leaving (this is stupid i know) was to upgrade my XDAII to 2003SE 2.02 rom.
I brought only my USB charge cable because i didnt want to carry too much.
Now, when I plugged it in to charge on my PC it said charging and the light came on as usual. However, it seems it wasnt charging. I left it overnight expecting to have a charged unit, only to find it completely dead the next day.
Now, when I plug it in, the charge light comes on RED for about 2 minutes, then the unit comes on from a hard reset and shows both charge levels at ZERO.
It stays on for about 10 minutes pretending to charge, but only the backup battery charges, the main one doesnt charge at all. Then it goes off totally and the light goes red again.
If I turn the unit off while it goes red straigh away and wont come back on.
After a few minutes it comes back on and pretends to charge again. The Backup battery reached "100 %" but the main battery will not charge. its still at 0% and wont charge.
Ive connected it to a 5v2amp psu as it requires but this was via a powered usb charger so using the same lead, not the official cradle.
Im worried there is something wrong but dont have access to the cradle.
Has anyone else ever had experiance of a total discharge state on an XDAII ?
UPDATE
I travelled 50 miles today to get to the nearest charge cradle for an XDA2, put my battery in and it charged fine. I put it back in the XDA and it worked. However, when I got home I plugged it into the USB charge lead, and it came on and said charging again, with the yellow light and all seemed well. I left if for a bit and the battery was then dead again with no charge and back to showing the red light. it wont come on at all now.
This is the same lead i used previously and the only change is the 2003SE rom, has anyone else had a problem charging after doing this rom upgrade? Can I revert back to 172 ? how? help please.
Please help. IM screwed unless I can find a solution, has anyone got any idea?
Dude, I have the same problem on my 1.72 version. I have (of course) dropped by xda2 several times on the floor, but it works charging from the cradle (which again has a adapter connected to it) but not from my brand new USB sync+Charge cable. I have also tried another cable and even on a different PC. Only thing that happens, is that it says it is charging, but nooooo... it's all flat after a little while. It's as if the cable uses my XDA power to change the PC instead of the other way around
It's funny. So now I have to drag that big-ass charger along with me to work every day instead of that neat little USB cable.
Life is unfair!
As for your problems, I can only say that you're not alone.
Hi, thanks for the reply.
I havent ever dropped mine, ive taken good care of it, so I dont think that is the cause. It does sound like the same issue however, I dont have my cradle here to test it though, just a usb sync+charge cable.
Does it work with the charge adaptor and psu alone? I mean the little thing that goes on the end of the mains psu to connect directly to the XDA without the cradle. How about on the cradle without the PSU plugged in?
I think this may be a hardware fault that needs repair, so its off back to o2 for mine if it is, you may find they would repair yours too.
Anyone else got an idea?
http://forum.xda-developers.com/viewtopic.php?t=4330
With my charger alone, it charges perfectly. In the Cradle with the charger connected, it works too. I havn't tried to use the cradle alone using only the USB cable to the PC.
I think I might bring it to the repair-dudes when it's so trashed that it is not working at all Until then, i will keep on using it.
I have exactly the same problem. i am not sure if it was because of the upgrade, but this is what happened to me, I upgraded to 1.72wwe from the factory 1.66wwe and it was working fine when I noticed that sometimes when it was charging after pulling out the plug, the unit will display 0% charge from the external battery and then after plugging it again the power is at 100%, It happened twice and was ok again, I presumed it was just a glitch from the system and promptly dismissed it as such. After a week, it was hardresetting everytime i got it out of the plug. I brought it to the service center and they replaced the battery (it was under warranty) It was working fine then I upgraded to 2003se the unit was ok for about 3 days then i noticed that the unit was loosing charge and hardresetting everytime. I brought it to the service center again and they said they replaced the motherboard this time and was back to 1.66wwe. So far its ok and working fine.
Hi
I ran out of battery while using my lumia 800. I tried connecting to both PC and Laptop and it just vibrates without booting. Kept it charging for hours , but still it wont boot up. If I press and hold power button it just vibrates. Just the black screen and no Nokia or the battery symbol.... Tried soft as well as hard reset but it wont work too. If I plug in the device it gets detected as some Qualcomm CDMA device. Tried this guide but the phone wont get detected in Nokia Care suite as well... and I dont have the original Lumia charger with me as well.. so charging only from the original USB cable
Any help / pointers would be really appreciated.
Thanks in advance
Send it for service if its in warranty they may repair it.
I guess its a problem with your screen. But you should give it to the store.
Sent from my GT-S5570 using xda app-developers app
starbriganza said:
Send it for service if its in warranty they may repair it.
I guess its a problem with your screen. But you should give it to the store.
Click to expand...
Click to collapse
it is a developer device and I really doubt I will get any replacement... Thanks for the help though
Though I strongly feel , it is not a screen issue. Any other ideas?
Thanks
xgt001 said:
Though I strongly feel , it is not a screen issue. Any other ideas?
Thanks
Click to expand...
Click to collapse
I searched on Nokia's website and found out many people had the same problems. Turns out that you will have to use an original wall charger by Nokia for Lumia 800 to charge it as it has a higher ampere rating than most wall chargers.
As you have completely drained your battery you will have to charge it without trying to boot it for maximum two hours. Most peoples phones started working after this.
Hope for the best.
starbriganza said:
I searched on Nokia's website and found out many people had the same problems. Turns out that you will have to use an original wall charger by Nokia for Lumia 800 to charge it as it has a higher ampere rating than most wall chargers.
As you have completely drained your battery you will have to charge it without trying to boot it for maximum two hours. Most peoples phones started working after this.
Hope for the best.
Click to expand...
Click to collapse
The Lumia 800's charger is 1A. Most modern smart phone chargers are the same so just make sure you are using one of that rating or maybe even higher (I think the 710 charger is 1.2A).
starbriganza said:
I searched on Nokia's website and found out many people had the same problems. Turns out that you will have to use an original wall charger by Nokia for Lumia 800 to charge it as it has a higher ampere rating than most wall chargers.
As you have completely drained your battery you will have to charge it without trying to boot it for maximum two hours. Most peoples phones started working after this.
Hope for the best.
Click to expand...
Click to collapse
Hi, I am on it now, fetched myself a Nokia charger. I just hope it works Thanks a lot!
xgt001 said:
Hi, I am on it now, fetched myself a Nokia charger. I just hope it works Thanks a lot!
Click to expand...
Click to collapse
It could also be a cable problem. Be sure you get the charger together with an original usb-cable.
Hi,
I charged the lumia whole night with the original charger and its still not booting. It vibrated after like some 10 minutes I put it to charge and I waited for it to boot, but alas nothing happening
xgt001 said:
Hi,
I charged the lumia whole night with the original charger and its still not booting. It vibrated after like some 10 minutes I put it to charge and I waited for it to boot, but alas nothing happening
Click to expand...
Click to collapse
Hard Luck buddy.
:\
connect it to an xbox
i had the same problem, and i solved it this way...
xgt001 said:
Hi
I ran out of battery while using my lumia 800. I tried connecting to both PC and Laptop and it just vibrates without booting. Kept it charging for hours , but still it wont boot up. If I press and hold power button it just vibrates. Just the black screen and no Nokia or the battery symbol.... Tried soft as well as hard reset but it wont work too. If I plug in the device it gets detected as some Qualcomm CDMA device. Tried this guide but the phone wont get detected in Nokia Care suite as well... and I dont have the original Lumia charger with me as well.. so charging only from the original USB cable
Any help / pointers would be really appreciated.
Thanks in advance
Click to expand...
Click to collapse
this guy can fix your phone with JTAG .
http://www.ebay.co.uk/itm/Boot-Repa...K_Replacement_Parts_Tools&hash=item416ea4e9be
xgt001 said:
Hi
I ran out of battery while using my lumia 800. I tried connecting to both PC and Laptop and it just vibrates without booting. Kept it charging for hours , but still it wont boot up. If I press and hold power button it just vibrates. Just the black screen and no or the battery symbol.... Tried soft as well as hard reset but it wont work too. If I plug in the device it gets detected as some Qualcomm CDMA device. Tried this guide but the phone wont get detected in Care suite as well... and I dont have the original Lumia charger with me as well.. so charging only from the original USB cable
Any help / pointers would be really appreciated.
Thanks in advance
Click to expand...
Click to collapse
This is because emptying the battery you must remain connected to the PC and try from time to time on appuier volume down + camera button + power button getting started one reinitialization of the factory default
Warning: the method of the buttons will cause the loss of all data
Try this!
Quoted from discussions.nokia.com/t5/Nokia-Lumia/My-Lumia-800-won-t-turn-on-anymore/td-p/1282979
You can connect the Lumia to the original charger or connect it to a PC using the supplied USB cable. In that case make sure Zune is running on the PC.
Click to expand...
Click to collapse
my nokia 800 is bricked
i tried to recover my firmware using nokia care suite 5 but it gives me the following error :X
what does this mean?
please help asap!
DTL Connection: Could not connect to media. DTL Back-End error code = 0x8400A403. DTL Back-End: Driver initialization failed. DCM status code = 0x84004424, Common USB DCM: USB preparation failed, last error code = 0x8007000D. .
Exception:
System.Runtime.InteropServices.COMException (0x8400AC35): DTL Connection: Could not connect to media. DTL Back-End error code = 0x8400A403. DTL Back-End: Driver initialization failed. DCM status code = 0x84004424, Common USB DCM: USB preparation failed, last error code = 0x8007000D. .
at FuseLib.DtlConnectionClass.ConnectToMedia()
at Nokia.CareSuite.PlugIns.WezenRecovery.RecoveryConnectionManager..ctor(FuseLoader fuseLoader, IConnection connection, UserInteractionDelegate userInteractionDelegate)
at Nokia.CareSuite.PlugIns.WezenRecovery.RecoveryDialog.RecoveryDialogModel.Flash()
at Nokia.CareSuite.PlugIns.WezenRecovery.RecoveryDialog.RecoveryDialogModel.<HandleDownloadVariantPackageCompleted>b__a(Object state)
Hello, i've a small Problem with my brand new Lumia 920...
yesterday i got it from postal service, after installing everything the battery got empty... ok no problem... pluged in the charger, i know from my HD7 that it could take a few minutes that the phones charges a bit before next boot...
but the lumia 920 didn't boot also not after about 1 hour on charger...
i just see the nokia messages then a small flicker line on the bottom of the screen and then it resets (i know it resets because the recognized devices, nokia bootloader and another one, by windows disapears)
and the "empty red" battery symbol apears with a charger sign when plugged in (whats normally be total normal) when trying to boot without charger then just the "empty red" battery symbol apears!!
when on charger, after the batterysymbol, i can see that the display isn't turning off, just showing black but has some light on it... definitly not that black when the phone is turned off completely...
yesterday i tried a few button combinations... plugin with volume down, shows a flash on the screen... after that the phones boots normally..
today i ran out again of battery, but now nothing helps...
anyone got this issue too?? any tip what i can try or do??
are you using the original charger?
The 920 needs high current charger in order to charge normally.
yeah i had this to about a week ago, just sit it on charge for a long long time with the stock charger. mine took probably 4-5 hours, then hit the on button and it came on (still saying it was flat, but turned on at least). havent had the issue since.
Edit: also, are you running stock rom? just wondering as im on flashed portico and i literally just saw another bloke with the portico update complaing of the same thing... which has me wondering if its firmware or something else..
Hello,
i guess i have the portico update allready...
my carrier released the phones 3 weeks ago...
i'm on 8.0.10211.204
1232.5951.1249.1002
i'm using of course the original charger that have come with the phone...
as it looks like it really takes many hours... so as yesterday on mine... i tried everthing... than i decided to let it alone... after watching TV the phone rings sometimes about a new message... !? wtf.... i will try next time when the battery rans out to just let it on the charger a few hours without trying to press some button combinations or disconnect and reconnect a few times ...
but i'm pretty sure this has something todo with that, that the screenlight is still on when on charger and this batterysymbol w charger icon apears or better said than disapears...
i thing the display still drains current and so the charge take longer to have the minium charge for boot... ?!
I have the same problem after I flashed it to portico
my phone still charging for 1 hour to start up & when it done the battery was 6%
ok, no i've changed my response, my phone went flat yesterday about 7am (perth time), its been on charge since, and no boot. (what am i up to? 27 hours?) ive tried different chargers (my Qi wireless charger, stock charger, random microusb charger), even tried different wall sockets. stressful....
Edit: sent back to nokia. apparently its bricked. also, holding the volume down button and plugging in the charger is meant to display an explanation mark while the phone is switched off. the person i spoke to at Nokia asked me to do this, but mine didnt display anything, thats when she decided it was bricked. i wonder if its anything to do with flashing the custom firmware... apart from this issue, the rom felt very stable.
Hi all,
My phone cut out at about 10% battery charge earlier and wouldn't turn back on. I thought it was probably just bad battery stats. But now I'm home, even after an hour on charge (and 30 mins on another charger) the phone won't turn on. It also shows up as an unrecognised device in device manager.
Whats weird is that when I first plug the charger in, rather than seeing the blue battery logo, I see an unfamiliar green battery logo as attached.
Has anyone got any ideas on how to fix this? (Tried booting with the volume up and volume down buttons held)
It's also come at quite a frustrating time, I may not be able to reply until Sunday night as I'm off camping in the sticks for the weekend.
Thanks
Plug your charger and Try to keep holding the power button for 1 min.....maybe start
fatalhh said:
Plug your charger and Try to keep holding the power button for 1 min.....maybe start
Click to expand...
Click to collapse
Sadly that didn't work.
The battery appears to now be taking a charge (300mA/h according to a USB multimeter), but I haven't been able to even get SP flash tools to recognise the handset sadly.
loadedscissors said:
Sadly that didn't work.
The battery appears to now be taking a charge (300mA/h according to a USB multimeter), but I haven't been able to even get SP flash tools to recognise the handset sadly.
Click to expand...
Click to collapse
Looks like battery dead....
fatalhh said:
Looks like battery dead....
Click to expand...
Click to collapse
That is the conclusion I'm coming to, sadly there doesn't seem to be a UK stockist of the battery yet, but I guess in the mean time I can see if the seller will honour any form of warranty on the product. For now, I'm back on my old G3 and it doesn't even begin to compare. I loved my Elephone.
Bad luck my friend.....I have a samsung galaxy 2 and one day run out of battery and never awake again....weird things
I think it should be cover with warranty.....Is one year in China
Type a email to Elephone support and they must be assist you because the phone is less than one year in the marketing.
I hope you will have a possitive news from Elephone
Thanks, I'll let you know how I get on.
I have the same problem a while ago with the green thing logo while charging , I even try it on wireless charger but it has the same thing with the green logo of battery ...but luckily it charge normally with blue logo
I have seen this on my screen a few times when I ****ed my bootloader during flashing. Device ended up being semi-bricked. I could not flash via SPtools because my device didn't get recognized. I was able to fix it luckily!
Hi all, sorry for the delay in responding.
So, the first problem was the battery. You need to charge it beyond 3.8v I think to get the phone to turn on, probably better to get it to 4v so you have enough charge stored to use the phone. The phone can't charge the battery below a certain threshold (around 3.7v) so you have to remove the battery and use a lithium-ion battery charger (any phone battery charger), these are available for about £2 on ebay.
In my phone the USB port had also stopped working for data transfer. I tried changing the board with the USB port on to no avail.
I replaced everything but the screen in the end to get it working.
Are/were you on stock OS or had you replaced it with another rom? Just for a bit more clarity of the problem.
Hello there,
Last night, I have charged my phone to 97% then dirty flash a custom kernel (Agni Pure Miui from v1.9 to v2.0), then my phone couldnt connect to pc or charge...
Even in Twrp or fastboot mode, it still couldnt connect...
It's still working fine, just cant charge, I have switched from various beta, 6.9.29, 6.10.13 from twrp and still cant charge or connect to pc.
I have used a charger doctor to monitor and all light turned off when I connected my phone, it was 0A and 5.2V when no device connected.
The charger doctor, cable and wall charger are working well on my others phone, I have tried orginal mi charger, mi powerstrip, tronsmart qc 2.0 and asus qc 2.0 but still nothing happened.
The phone is completely out of battery now, I still can't charge or connect to PC via USB cable, however when connect to PC, it said that USB power surge the USB port is not enought power for the device or something...
its not a software issue its a fault with hardware go to your nearest service center.......they will take apprx 20 days to repair it.
i also faced this same issue.
shomil49 said:
its not a software issue its a fault with hardware go to your nearest service center.......they will take apprx 20 days to repair it.
i also faced this same issue.
Click to expand...
Click to collapse
Sadly, there is no service center here because Xiaomi doesn't have any distributor here :/ Just bought it for about 3 months and it seems I have lost it :/
Edit:
OMG, it is suddenly able to charging for now :/ After 24+ hours without any hope I don't know what I have done but I blow a charger port in the phone a lot, just few minutes ago, it couldn't charge, even with Mi power bank (10k mah 2014 version), but it's charging now, I've tried to turn on the phone and it worked too but with 0% battery and charging.
MIRACLE HAPPENED!
You were lucky...i had to wait for 20 days to get it repaired ....very slow service