Related
Tip: if the flashtool not regonize your phone, use pc companion to install the SEMC Usb Driver
to let flashtool regonizing your phone.
howto do: use pc companion, do what it says,
if it says: you have already the new update, press recover, he install the SEMC Usb Driver,
then press cancel.
Now you have the Semc Usb Driver installed on your Pc/Laptop.
Updated with the new kernel from DooMlord.
read this carefully:
http://forum.xda-developers.com/showthread.php?t=1254087
i do this:
1: Please make sure you have enabled usb-debugging in your current rom before starting with this!!
2: flash the azuzu kernel downgrade ftf with flashtool
then do this and download this
http://forum.xda-developers.com/showthread.php?t=1256430
if it no respond just wait, i must have his superuser action regonize
then do this:
3: after unlocking is finish you have to flash azuzu kernel upgrade
4: now power on phone to check if the phone is starting after the unlock (if you are using a custom kernel yet with the bypass method and get stuck in a bootloop enter xrecovery and clear dalvik-cache, then your phone should boot up again fine)
power off phone and flash X10_2.3.3_DooMKernel-v06-FS-BootManager-v1.4.ftf
with flashtool
now reboot your phone and go to XRecovery and install the zipfile: x10_gb_DooMKernel-v05a-FS_wifi modules
power on phone again and if everything is right, read the line under that one
WOOOHOOO!!! Here you are with unlocked bootloader, custom kernel directly loaded AND without reflashing any rom, means you have kept your current installation
Doom his files:
Flash this with flashtool: http://www.multiupload.com/ISV5FMZHJ0
install this with xrecovery: http://www.multiupload.com/XMB0OO8PWH
i do it like this and it works !
Important !! If you are using the Unlocking Bootloader tool, just wait, do nothing,
He must get his acces to superuser, look at the letters/numbers in the tool
[*] >> run ADB in tools as administrator of x10 bootloader dont work, after that it works !
press hard but safely the Thanks button !!
succes !!!
p.s. i help a friend yeeyon1990 and myself and maybe more.
Its working !!
Thanks to:
DooMlord
Mayazcherquoi
9Lukas5
The_Laser
What's the difference of using the latest flashtool 0.4.2 by having stock 2.3.3 firmware and rooting and unlocking the bootloader using the latest flashtool?
Eugene1991 said:
What's the difference of using the latest flashtool 0.4.2 by having stock 2.3.3 firmware and rooting and unlocking the bootloader using the latest flashtool?
Click to expand...
Click to collapse
none except...it´s easier
Crowds said:
none except...it´s easier
Click to expand...
Click to collapse
yes indeed, but i post this, by some peeps dont work the new flashtool.
and i do it like this and yes it works.
This is just a rehash of the guide in the sticky in this section by lukas
It is not an easier method, using flashtool 0.4.2.0 is the currently the easiest method.
gregbradley said:
This is just a rehash of the guide in the sticky in this section by lukas
It is not an easier method, using flashtool 0.4.2.0 is the currently the easiest method.
Click to expand...
Click to collapse
Greg i know mate, but my friend yeeyon1990
have everything tried and this works for him and for me,
he was using the new flashtool but that doesnt work for him(no phone regnize or something) and this one works for him, how i explained here, so that why i makin this thread to help other peeps, i hope you will understand thit, why is start this one.
Regards
lex1986 said:
Greg i know mate, but my friend yeeyon1990
have everything tried and this works for him and for me,
he was using the new flashtool but that doesnt work for him(no phone regnize or something) and this one works for him, how i explained here, so that why i makin this thread to help other peeps, i hope you will understand thit, why is start this one.
Regards
Click to expand...
Click to collapse
OK, if it works some people, but maybe just directing to people to the sticky would be good.
Its always good to help people, I wasnt having a go...many thanks for trying to help people
I am very disappoint :-( I tried every think . And finally using the official Rom of se.
Sent from my X10i using XDA App
I think you missed someone in the credits list.
Sent from my X10i using XDA App
Hzu said:
I think you missed someone in the credits list.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Guess you mean the_laser?
9Lukas5 said:
Guess you mean the_laser?
Click to expand...
Click to collapse
Yeah thankx, i forgot the...laser
I do it when im home on sunday, sorry to forgot him.
Remember sunday is my birthday!!!
Sent from my X10i phone
lex1986 said:
Yeah thankx, i forgot the...laser
I do it when im home on sunday, sorry to forgot him.
Remember sunday is my birthday!!!
Sent from my X10i phone
Click to expand...
Click to collapse
You can still edit posts from the phone app, long press on the post you need edit, click on modify, click on edit, then add the_laser
Sent from my X10i using xda premium
gregbradley said:
You can still edit posts from the phone app, long press on the post you need edit, click on modify, click on edit, then add the_laser
Sent from my X10i using xda premium
Click to expand...
Click to collapse
you happy now? Hahaha, just kiddin mate, its done and thanks for the info.
Sent from my X10i using XDA Premium App
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
Click to expand...
Click to collapse
Because you now baseband and kernel for 2.1. Thats normal, now unlock your bootloader.
.....flash the azuzu kernel downgrade ftf with flashtool
disconnect usb cable, press power button until phone vibrates shortly and immidiatly connect the usb cable again......
---------- Post added at 12:42 PM ---------- Previous post was at 12:35 PM ----------
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
Click to expand...
Click to collapse
Repair with seus, then root your phone with flashtool 0.4.2.0 and then unlocked bl.
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
Click to expand...
Click to collapse
no man just read better:
then do this and download this
http://forum.xda-developers.com/showthread.php?t=1256430
if it no respond just wait, i must have his superuser action regonize
you must just wait mate and read the letters in the bootloader tool what it do with the superuser (he must get his acces), i got it to. you must do nothing.
just wait patiently and it gonna be alright.
Thanks, it worked. Sorry, it really was simple.
bbluff said:
Thanks, it worked. Sorry, it really was simple.
Click to expand...
Click to collapse
no problem mate, i told it`s working,
i do it with these steps, thats why im posting this.
yes its simple.
read, be smart and its working
cheers
My mini is running vanilla 2.1 (rooted) and after I try to install Theme (trough xrecovery) and it got bricked (stuck at white SE logo) and the worst of all it can't be turn off. I already try to recover using SEUS, Flashtool but all of it unable to detect the phone. What should I do to recover it..??? If I take the phone to SE service center (it still on warranty) it's going to take 2 week for them to just flash the phone. I greatly appreciate any help/advise to recover the phone.
Thank's beforehand
arief.satriyo said:
My mini is running vanilla 2.1 (rooted) and after I try to install Theme (trough xrecovery) and it got bricked (stuck at white SE logo) and the worst of all it can't be turn off. I already try to recover using SEUS, Flashtool but all of it unable to detect the phone. What should I do to recover it..??? If I take the phone to SE service center (it still on warranty) it's going to take 2 week for them to just flash the phone. I greatly advise to recover the phone.
Thank's beforehand
Click to expand...
Click to collapse
are u able to get into recovery ?? if yes then just reflash the ROM through recovery it will be fine relax..
faiyyaz said:
are u able to get into recovery ?? if yes then just reflash the ROM through recovery it will be fine relax..
Click to expand...
Click to collapse
Unable to get into anything (not even to power off the phone)
faiyyaz said:
are u able to get into recovery ?? if yes then just reflash the ROM through recovery it will be fine relax..
Click to expand...
Click to collapse
ooops it's look like I made to get into xrecovery, but what should I do next Factory Reset...??? Since I haven't backup anything using xrecovery...???
arief.satriyo said:
ooops it's look like I made to get into xrecovery, but what should I do next Factory Reset...??? Since I haven't backup anything using xrecovery...???
Click to expand...
Click to collapse
Bro now that u have got into xrecovery .. just follow the steps u followed to flash your ROm [custom ROM].. if ur unable to understand tel il explain more..
---------- Post added at 08:09 PM ---------- Previous post was at 07:54 PM ----------
faiyyaz said:
Bro now that u have got into xrecovery .. just follow the steps u followed to flash your ROm [custom ROM].. if ur unable to understand tel il explain more..
Click to expand...
Click to collapse
if u dont want to loose ur data n as u dont have a backup aswell..just follow what i said..reflash ur ROM with recovery ..ul be back to normal with ur user data..
faiyyaz said:
Bro now that u have got into xrecovery .. just follow the steps u followed to flash your ROm [custom ROM].. if ur unable to understand tel il explain more..
---------- Post added at 08:09 PM ---------- Previous post was at 07:54 PM ----------
if u dont want to loose ur data n as u dont have a backup aswell..just follow what i said..reflash ur ROM with recovery ..ul be back to normal with ur user data..
Click to expand...
Click to collapse
How do I restore without having it backup on the first place...???
arief.satriyo said:
How do I restore without having it backup on the first place...???
Click to expand...
Click to collapse
mate can u just reflash the ROM through the xrecovery the get your phone workin ,i guess that is more imp.. neways for ur knowledge it will just get ur files back as before..
steps:
1) flash ur ROm with Recovery
2)DONOT make a factory reset [or else ul loose ur user data]
3)reboot
n ur phone will boot normally
hope it helps
faiyyaz said:
mate can u just reflash the ROM through the xrecovery the get your phone workin ,i guess that is more imp.. neways for ur knowledge it will just get ur files back as before..
steps:
1) flash ur ROm with Recovery
2)DONOT make a factory reset [or else ul loose ur user data]
3)reboot
n ur phone will boot normally
hope it helps
Click to expand...
Click to collapse
I don't see any "recovery" in xrecovery menu
Only Backup and restore, even that I already try restore but as I say before I haven't backup anything at all.
You have the .zip file in the memory card if you have it then install the zip file
EVERYTHING WILL BE ALRIGHT DONT WORRY
Sorry for my bad English
kkkhattak said:
You have the .zip file in the memory card if you have it then install the zip file
EVERYTHING WILL BE ALRIGHT DONT WORRY
Sorry for my bad English
Click to expand...
Click to collapse
Unfortunately I don't have that zip file, any idea where I can get it...???
arief.satriyo said:
Unfortunately I don't have that zip file, any idea where I can get it...???
Click to expand...
Click to collapse
How did you get this version
kkkhattak said:
How did you get this version
Click to expand...
Click to collapse
If I remember correctly I got the xrecovery here http://forum.xda-developers.com/showthread.php?t=859571
arief.satriyo said:
If I remember correctly I got the xrecovery here http://forum.xda-developers.com/showthread.php?t=859571
Click to expand...
Click to collapse
No The android version the 2.1 version
well sorry.. i guess ur new with the flashing thing.. see now i guess u are on the stock andriod 2.1 version ryt.. ? i thought u were on the custom ROM..so ul loose ur user data if u want to restore ur phone normal..
follow these
1) so download the attachement from this link http://www.mediafire.com/?a60eba9y0nfafqb
2) place the 2.1.1.C.0.0-R.zip in the sdcard
3)enter into xrecovery with ur phone
4)there is an option update from .zip .select it
5)then search for the 2.1.1.C.0.0-R.zip and flash it,wait til it gets done
6)thats it ur done
hope this was quite easy to understand
faiyyaz said:
well sorry.. i guess ur new with the flashing thing.. see now i guess u are on the stock andriod 2.1 version ryt.. ?
Click to expand...
Click to collapse
just like I mention on my first post of this thread, I'm running vanilla (stock) 2.1
arief.satriyo said:
just like I mention on my first post of this thread, I'm running vanilla (stock) 2.1
Click to expand...
Click to collapse
yes i am sorry thought u were on a custom ROM.. but follow the steps which made a post above urs..
arief.satriyo said:
just like I mention on my first post of this thread, I'm running vanilla (stock) 2.1
Click to expand...
Click to collapse
How did you put this version into the mobile
kkkhattak said:
How did you put this version into the mobile
Click to expand...
Click to collapse
bro its the default one which we get from Sony Ericsson.. just got confused as he wrote vanilla thinking its a Custom ROM
faiyyaz said:
bro its the default one which we get from Sony Ericsson.. just got confused as he wrote vanilla thinking its a Custom ROM
Click to expand...
Click to collapse
Ohhhhhhhhh difficult one did you tried the sony erricson companion
---------- Post added at 09:46 PM ---------- Previous post was at 09:44 PM ----------
arief.satriyo said:
My mini is running vanilla 2.1 (rooted) and after I try to install Theme (trough xrecovery) and it got bricked (stuck at white SE logo) and the worst of all it can't be turn off. I already try to recover using SEUS, Flashtool but all of it unable to detect the phone. What should I do to recover it..??? If I take the phone to SE service center (it still on warranty) it's going to take 2 week for them to just flash the phone. I greatly appreciate any help/advise to recover the phone.
Thank's beforehand
Click to expand...
Click to collapse
Hey dont take it to them it is rooted it will be very dangerous to take it to them
kkkhattak said:
Ohhhhhhhhh difficult one did you tried the sony erricson companion
---------- Post added at 09:46 PM ---------- Previous post was at 09:44 PM ----------
Hey dont take it to them it is rooted it will be very dangerous to take it to them
Click to expand...
Click to collapse
well actually Sony Ericsson in my country doesn't had the same rigid standard about rooted phone. As long as no hardware had been compromised the warranty still fully apply, the only downside is it's took 2 week for them to just flashing the phone.
Hey,
'm curious to know, how many X10i are bricked, cause of any reason, just add your specific location, so we might help each other..
Here let's start with me:
Xperia Model:X10i
Bricked on: 5 March 2012
Location: Mumbai, India
Description: I had installed a custom rom and then I tried to install few apps, this was my 3rd custom rom and it crashed, didn't start ever after that..
Use seus or pc companion to repair
Sent from my X10S using XDA
Dear laneyofdeath,
Pls read few of my previous posts, I've tried all possible methods to put life back into that x10...............
It doesn't work..........!!!!
Did u try flashtool? I can only see one post by the way it doesn't mention seus
Sent from my X10S using XDA
I had the same problem as you recently.
Lost xrecovery, phone not booting, flashtool not seeing phone...
The only thing that fixed it was the flasher at wotanserver.com - someone mentioned it in a post here on XDA.
http://www.wotanserver.com/en/
Its free but you have to sign up...but it is well worth the 2 minutes.
Its all automatic, select your phone and thats it.
It flashes back to GB2.3.
Then you can use flashtool to go where you want from there.
Flashtool guide...
http://forum.xda-developers.com/showthread.php?t=928343
Have fun
mugsy730 said:
I had the same problem as you recently.
Lost xrecovery, phone not booting, flashtool not seeing phone...
The only thing that fixed it was the flasher at wotanserver.com - someone mentioned it in a post here on XDA.
http://www.wotanserver.com/en/
Its free but you have to sign up...but it is well worth the 2 minutes.
Its all automatic, select your phone and thats it.
It flashes back to GB2.3.
Then you can use flashtool to go where you want from there.
Flashtool guide...
http://forum.xda-developers.com/showthread.php?t=928343
Have fun
Click to expand...
Click to collapse
Thanks for the help broseph....
surajpardeshi said:
Dear laneyofdeath,
Pls read few of my previous posts, I've tried all possible methods to put life back into that x10...............
It doesn't work..........!!!!
Click to expand...
Click to collapse
If you say youve tried all possible methods-then the phones knackered.If it was me I would have
Try a different battery
Hardwire a battery
Try using a different pc
Try every version of flashtool
Try x10 flasher
Leave battery out for a while
Then after trying several times some of the above,and still nothing,It would go for repair or on eBay
Sent from my X10i using xda premium
Bricked on: 12/4/2012
Reason: After installed Fera v13.5 on locked bl, bricked~ seem like a known issue.
XIAO-WEI said:
Bricked on: 12/4/2012
Reason: After installed Fera v13.5 on locked bl, bricked~ seem like a known issue.
Click to expand...
Click to collapse
U need to provide more info but I'd start with seus
Sent from my X10S using XDA
XIAO-WEI said:
Bricked on: 12/4/2012
Reason: After installed Fera v13.5 on locked bl, bricked~ seem like a known issue.
Click to expand...
Click to collapse
If you're on locked BL then it's not bricked
Just use SEUS or Flashtool (with a 2.3.3 FTF) to go back to stock 2.3.3.
hi Underling,
I've tried
Try a different battery : Yes, done..same thing
Hardwire a battery: don't know how to do it (tries google, didn't get it, can you please enlighten)
Try using a different pc: Yes, done..same thing
Try every version of flashtool: Yes, done
Try x10 flasher: Trying, to work on it..............flasher, you meant to say wotonclient 3.8.0, correct me, if 'm wrong ?
Leave battery out for a while: Done
hi ppl.
I was flashing my xperia u via flashtool when i realize that the fw i was flashing was for xperia sola. (dumb, i know)
I didn´t get too nervous , because knew that i could always reflash with flashtool , the right fw again,so i let finish the flash and reflash again , but this time with the fw for xperia u!
now the problem is that the touch screen is dead , no response at all!
I already try, to reflash a dozen times, i used seus repair option too, but the result is always the same,no touchscreen!
My bootloader is locked , i tought that a locked bootloader could prvent this kind of thing from happen, or am i wrong?
Now guys any ideia how to try to fix this, without taken the phone to a service center?
If ur Boot Loader is Locked .....
Try To Restore with Sony Update Service
"i used seus repair option too, but the result is always the same,no touchscreen...."
i already try that, but no the probem persist!
emppu said:
"i used seus repair option too, but the result is always the same,no touchscreen...."
i already try that, but no the probem persist!
Click to expand...
Click to collapse
Flash stock ftf with flashtool first. Then update/repair again with pc companion..
Thanks,
PALLAVI KALYANAM
like Xperia Mini ST15i, if you flash the wrong firmware the touch will not work even you restore or update the software via SUS. my xperia mini work til i replace a new DIGITIZER.
lestercute08 said:
like Xperia Mini ST15i, if you flash the wrong firmware the touch will not work even you restore or update the software via SUS. my xperia mini work til i replace a new DIGITIZER.
Click to expand...
Click to collapse
So you saying that the digitizer broke?
How in hell bad drivers(i suposse is the drivers) can destroy a perfect piece of hardware?
Well ,the best solution is change the digitizer?
Sorry all this questions,but iam really intriged by this.
flashing wrong firmware can broke the digitizer, i dont know why happening this, so the best way for me to get out of this situation is to change your digitizer. note that screen and digitizer is seperated to each other.
probably because the sola has "floating touch"...
that must have pushed the hardware while trying to use it when it did'nt exist on our phone .......resulting in a screwed up digitizer
if its still bootloader locked, just flash a stock rom and get it repaired under warrenty..
unreal3000 said:
probably because the sola has "floating touch"...
that must have pushed the hardware while trying to use it when it did'nt exist on our phone .......resulting in a screwed up digitizer
if its still bootloader locked, just flash a stock rom and get it repaired under warrenty..
Click to expand...
Click to collapse
i agree with unreal3000..
thx for thw answers guys!
i send the phone to Service center today.
lets see what they gonna tell me!
I keep u guys informed what is the repair that they do to the phone!
Hi guys
I have my phone now,come today from service center.
The report from the repair says that they change the touch and repair the contacts in the digitizer connection sock.seems that the problem wasnt new and some st25i came out with some defect in that sock.
So that make me wonder if the thouch stop working because the wrong firmware i put in or the hardware problem they report.
Well nevertheless i have the phone running again
Thx for the support
Ps:the phone was repaired using the warranty
Sent from my ST25i using xda premium
emppu said:
Hi guys
I have my phone now,come today from service center.
The report from the repair says that they change the touch and repair the contacts in the digitizer connection sock.seems that the problem wasnt new and some st25i came out with some defect in that sock.
So that make me wonder if the thouch stop working because the wrong firmware i put in or the hardware problem they report.
Well nevertheless i have the phone running again
Thx for the support
Ps:the phone was repaired using the warranty
Sent from my ST25i using xda premium
Click to expand...
Click to collapse
I was wondering if you managed to boot after flashing?
Kind Regards
| -raison d'etre- |
Yes i manage to boot after the flash with the wrong fw.
May i ask why u asking?
Sent from my ST25i using xda premium
Xperia u touch sensitivity problem.
I am facing the same problem.Yesterday I tried to put the ftf of xperia go..and now the touch sensitivity of my phone stopped working.Then after reflashing it with a proper ftf and relocking the bootloader i updated it through the SUS.and now it works fine with the usb mouse but touch is not working. So if i give it to the service center will they provide me the service in warranty or i have to pay for that??
You'd get it in warranty most likely
[ If I've Helped Hit THANKS ] | -raison d'être- | [ ST25i ]
---------- Post added at 11:37 PM ---------- Previous post was at 11:36 PM ----------
emppu said:
Yes i manage to boot after the flash with the wrong fw.
May i ask why u asking?
Sent from my ST25i using xda premium
Click to expand...
Click to collapse
Just curious, making a mental list of what/what won't boot
[ If I've Helped Hit THANKS ] | -raison d'être- | [ ST25i ]
So if the phone is generally booting and working after flashing different ROM, maybe there's a way to flash future JB update from Xperia P to Sola or Xperia U??? Replacing only the drivers of touchscreen to avoid problems like in this thread.
What about image resolution? ksonu03, if you flashed GO fw, UI and other graphical elements were properly displayed on Xperia U???
st27 stop working
i have the same problem.mt27 file flashed to xperia go and now touch screen stop working.please help
miladmt66 said:
i have the same problem.mt27 file flashed to xperia go and now touch screen stop working.please help
Click to expand...
Click to collapse
try flashing gb ftf and see if it works or not
Sent from my Xperia U using Tapatalk 2
no no i had this prob in my old xperia mini when i flash lww fw
all you have to do is
1.flash xperia u/or your device fw you flashed in second time after sola/wrong fw
2.flash xperia sola/wrong fw you flashed in first time
3.flash xperia u/your devices fw again
4.reboot
NOTE:do all of this steps with out opening or restarting the device or even do not take the battery out
do this at your own risk
Press THANX If I Helped
---------- Post added at 09:10 PM ---------- Previous post was at 09:09 PM ----------
drsanket_xperia_u said:
try flashing gb ftf and see if it works or not
Sent from my Xperia U using Tapatalk 2
Click to expand...
Click to collapse
flashing gb will not work
Since u said u relocked the bootloader I think it will no longer be repaired under warranty coz unlocking the bootloader itself makes warranty void despite u lock it again
Sent from my ST25i using xda app-developers app
Hey guys,
I wanted to share a great method to harmlessly unlock the bootloader on Neo and Neo V which works on every device (before and after 12w14). Simply follow this steps:
EDIT: Use it over GB firmware, or flash ICS kernel after using this fix if You are on ICS and want to keep it, otherwise You will get bootloops!!!!
1. download this program:
http://www.2shared.com/file/xfkXTzdB/ZeroPercentFixTool.html
2. Register Your IMEI number on this site:
http://unlockbootloader.sonymobile.com/
and let the code be sent to You by Sony Ericsson to your e-mail.
3. Then open zeropercentfixtool.exe (remember to have all the drivers installed)
4. Copy the code into the program, click fix it and connect the phoine in fastboot mode.
5 After that it is better to desconnect the phone, and flash ICS kernel, than all should work perfectly
Voilla, done
You finally have unlocked the newer versions of xperia Neo/Neo V ))
PS. nevermind that the program says zero percent fix tool, it unlocks the bootloader as well. Tried on my Neo V 12w9 and 12w31 and it's working like a charm
Hope You enjoy it !
For discussion, thread in General section:
http://forum.xda-developers.com/showthread.php?t=2073488
--Deleted --
Sent from my MT11i using xda premium
Hey cn u xplain a little which drivers are needed? I have flashtool ones installed.. Which others
Sent from my MT11i using Tapatalk 2
cant work
hey pls specify in op. That its for gb. Aftr unlockin u gt a gb kernel. So guys its easiest method but after dng this flash an ics kernel and it will work.. Thanks at op... Its awesome..
Well,seems your method is pretty much easier for noobs!!!
It involves less manual work!
Sent from my MT11i using xda premium
Less manual almost no manual work.
Sent from my MT11 using Tapatalk 2
It uses official sony website, so does it delete DRM?
Gyrxiur said:
It uses official sony website, so does it delete DRM?
Click to expand...
Click to collapse
yes
when i swoitch off my phone. and press the furtherst right button and hold it and connect the cable to my sony experia newo -V mdoel nothign happens
i hear a sound like a few da dng dadang thast all
---------- Post added at 07:15 AM ---------- Previous post was at 06:47 AM ----------
I alwasy get this message
windows was unable to install your s1boot fastboot
windows could not find driver software for your device
im using xperia neo -v!!! and what is the buttons for going into fast-boot in xperia neo-v?
i always press the most right button and then hook the usb cable .no need to press power on button all right?
and i don't have to root my phone first .. another problem which i haven't even started,
Did u install flashtool drivers? Be sure to select ur device and fastboot as well as flashmode drivers. Nd I thinks theres no need of root in it. The menu button is fastboot button. Hold it nd connect ur phone to pc via usb. Reject the pc companion prompt. And follow to OP. Nd if ur on ics keep an ics kernel with u.
If I helped pls press thanks
sent from my supercharged neo v running sonic powered by suave kernel.
i manged to do it.
and then now it keeps showing the Sony coercion logo then witches off and then again nd again keeps showing the logo!!
and nothing else, like keeps rebooting!
Alright, I'd like to clear something now. If I lose my DRM files, what exactly do I have to my disadvantage? Also, if I unlock my bootloader using this technique, can I lock it back? If yes, how and then after I've locked it back, can I get to the latest original firmware from Sony using SEUS/PCC?
U CANT!!! I JUST used this guys method
my phone keeps shoing siny ericson logo for a while then reboots nons top and keeps stills hwoing it againa nd again!!
I haventused it fora while. But isnt it the menu button?
Lately i just use flashtool for kernels.....
Sent from my A500 using xda app-developers app
@clementandre I had written in 3 rd post. If ur on ics flash ics kernel nd reboot. It will show sony logo nd reboot perfect. Flash an ics kernel.
If I helped u pls press thanks
sent from my supercharged neo v running sonic powered by suave kernel.
---------- Post added at 01:01 PM ---------- Previous post was at 12:58 PM ----------
Yes u can lock bootloader using dis method nd flash original firmware. U lose drm i.e. U ll lose track id nd music unlimited n such apps. Bt once u unlock nd relock u wont gt ur drm back by any method nd will lose warranty. And ur device wont b recognised by seus or pc companion. Ull have to flash using flashtool.
Pls presss thanks if I helped u
sent from my supercharged neo v running sonic powered by suave kernel.
BlitzBerg said:
Alright, I'd like to clear something now. If I lose my DRM files, what exactly do I have to my disadvantage? Also, if I unlock my bootloader using this technique, can I lock it back? If yes, how and then after I've locked it back, can I get to the latest original firmware from Sony using SEUS/PCC?
Click to expand...
Click to collapse
If BL unlocked officially, warrenty is VOID, no more official updates and DRM is lost.
U lose DRM for ever if BL is unlocked by official method. TrackID app willnot work.. this is what i have in my knowledge.
I never minded in unlocking it.. since i dont use it.
If you know what you are doing, then no problem at all.. so i unlocked BL officially.(no option,, manufactured 12w14)
If unlocked by unofficial method, then u can relock it.. search in the forum to gain more knowledge..
What would happen if I unlock my bootloader officially and mess while flashing ROM? I know about phones being brick, but have no idea of what is a soft brick and a hard brick. Someone to enlighten me?
koradiavatsal said:
hey pls specify in op. That its for gb. Aftr unlockin u gt a gb kernel. So guys its easiest method but after dng this flash an ics kernel and it will work.. Thanks at op... Its awesome..
Click to expand...
Click to collapse
You're right
Sorry for no responses, I was away.
To clear this, You need flastool and fastboot drivers, they can be found in flashtool folder for example. For fastboot drivers, You can try to download them (use google or XDA search) connect Your phone in fastboot mode( blue LED) and manually point them for windows to install.
As for ics kernel, the best way is to complete this fix in fasboot, reconnect the cable, then flash ics kernel and that's all
Ghostfreak NB said:
Well,seems your method is pretty much easier for noobs!!!
It involves less manual work!
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
Yes, indeed I myself, couldn't figure out the 'official' method, something was missing, but with this one it's much easier