Hello!
I have a Droid Razr XT912, system shows this:
System Version: 98.72.16.XT912.Verizon.en.US
Android Version: 4.1.2
Baseband: CDMA_N_05.21.00. LTEDC_U_09.1D.00
Kernel: 3.0.8-gbacb1cf
Build Number: 9.8.2O-72_VZW-16
Every time When I try to turn on the phone, the Fastboot screen shows up, and says: Flash Failure. When I enter the menu and select "Normal Boot" it boots perfectly, but when I turn it off and on again, "Flash Failure" shows again.
I happened after a wrong RSD Lite flashing,and I can't use that program since my Micro USB connector is dead.
Is there any way to solve the Flash failure message via Recovery? Maybe if I download the OTA JB update zip and flash it through Recovery?
I'm afraid of bricking my device, and since I don't have a Micro USB connector, I can't RSd lite..
Thank you for the help
AW: [Q] Help me restore my Razr
Factory Reset allready done?
Gesendet von meinem XT910 mit Tapatalk 2
Merlinos1 said:
Factory Reset allready done?
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
Solved, I just did nothing any my phone finally turns on as usual...
I hate Motorola
Related
I have brick my phone please help me i istallate FW 4.0.2.A.0.62 with flashtool and when i try to power on the phone the LED turn on and turn off with don't do nothing.... i can enter only in flashmode and flash other firmaware but if i flash one firmaware don't change nothing....
help me sorry for bad english but i'm very worried
i couldn't really get the problem
by led turning on/off what do you mean? is the color blue ?
do you see sony ericsson writing when you try to turn it on?
have you unlocked the bootloader ?
flash stock tft. it will revert you phone to stock factory status.
tick "NO Final Verification"
rik994 said:
I have brick my phone please help me i istallate FW 4.0.2.A.0.62 with flashtool and when i try to power on the phone the LED turn on and turn off with don't do nothing.... i can enter only in flashmode and flash other firmaware but if i flash one firmaware don't change nothing....
help me sorry for bad english but i'm very worried
Click to expand...
Click to collapse
What was your phone configuration before you flashed 0.62 on it?
Kernel, Rom, unlocked bootloader?
Gesendet von meinem MT11i mit Tapatalk 2
I bricked my wife's xt912. It was rooted and on stock Jelly Bean. I used RSD Lite to flash the JB firmware using a factory data cable because the battery was dead. I can now boot normally with the data cable, but the battery isn't charging. If I try to boot into recovery, I get the dead robot but otherwise, everything boots up fine until I unplug the cable. If I plug it into a normal charger, it goes into the AP fastboot saying battery low. Any ideas?
Try to wipe Data in Recovery.
When the dead Android appears, hold Vol. down and press Vol. Up short.
The Factory Cable can't charge your Phone, it's just an bypass to flash with an dead battery.
Gesendet von meinem XT890 mit Tapatalk 2
Plzz help me i bricked and also not entering AP Fastboot mode
I had latest LOlllipop on my moto xt912 bt i tried to flash kitkat rom
n now its bricked
It is starting up to moto logo and then switched off
it is not even entering in AP fastboot mode
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
help me
I tried to install cyanogenmode and I failed. Then I closed my phone accidently while I was installing the backup. Now I can't even open safetrap. What can I do? My computer cant recognize my phone either.
I have tried the external reset but the motorola logo shows but the android logo doesn't...
Use RSD Lite to flash your stock ROM.
Search the forum fo flashing instructions.
DROID RAZR with Tapatalk 4
neo.ank said:
Use RSD Lite to flash your stock ROM.
Search the forum fo flashing instructions.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
I can't charge my phone and it always goes off when I plug off or sometimes I even don't plug off but It shuts down itself again
It was plugged in like 5 hours and when I plugged out the same thing happened..
In that case, you'll need the factory cable to flash it.
DROID RAZR with Tapatalk 4
neo.ank said:
In that case, you'll need the factory cable to flash it.
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
when I plug it to computer with usb now the led lights white and when I open fastbooter and start flashing It fails
Screenshot of err. & what kind of xml you trying to flash?
Sent from my Atrix 2 using Tapatalk.
Same thing just happened to me an hour ago! working on a fix
PJBP said:
I tried to install cyanogenmode and I failed. Then I closed my phone accidently while I was installing the backup. Now I can't even open safetrap. What can I do? My computer cant recognize my phone either.
I have tried the external reset but the motorola logo shows but the android logo doesn't...
Click to expand...
Click to collapse
are you using your laptop to charge your phone or is it plugged into the wall..because I had it in my laptop and it wouldn't boot up but the second i had it in a wall charger it booted right up!
I tried to encrypt my Razr and it shut off in the middle of it and rebooted and when it turned back on it said "Encryption unsuccessful". It asked to reset the phone. I tapped reset phone, nothing happened. I manually factory reset it from recovery mode and when I rebooted the phone the same
message came up. I tried to flash an sbf file through RSD Lite and it failed. Now the screen says
"AP Fastboot Flash Mode (S) (Flash Failure)
0A.77
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0"
Now the only way the boot up normally is through the boot menu but when I do the encryption message comes up.
What do I do?
Flash latest JB ROM with Razr Toolkit....you can find it on general discussion forum
Enviado desde mi XT912 mediante Tapatalk
joshua3001 said:
Flash latest JB ROM with Razr Toolkit....you can find it on general discussion forum
Enviado desde mi XT912 mediante Tapatalk
Click to expand...
Click to collapse
Can you post link? Also whenever I plug the phone into the computer is says "USB Device not recognized"
Hey guys, yesterday i was testing some roms and after downloading a stock one it turned on pretty fine but when i restarted it stucks at the recovery page, i can go for the the bootloader mode but can't turn on normally, if i just restart/reboot my cellphone it goes automatically to the recovery.
I'm using a TWRP v3.1.1-griffin Erfan
Thank's for the attention
s3nn4 said:
Hey guys, yesterday i was testing some roms and after downloading a stock one it turned on pretty fine but when i restarted it stucks at the recovery page, i can go for the the bootloader mode but can't turn on normally, if i just restart/reboot my cellphone it goes automatically to the recovery.
I'm using a TWRP v3.1.1-griffin Erfan
Thank's for the attention
Click to expand...
Click to collapse
fastboot oem fb_mode_clear
Gesendet von meinem XT1650-03 mit Tapatalk
kabelitz said:
fastboot oem fb_mode_clear
Gesendet von meinem XT1650-03 mit Tapatalk
Click to expand...
Click to collapse
Omg, i guess i'm a godmanm stupid haha, thank you very much!