I managed to flash the HSPL and a costom rom (Dynamics v2.0) I have wifi and signal issues and want to send the phone to the HTC repair service.
I managed to flash HSPL without a gold card as my HTC is from the UK (Europe)
Does anyone know how to get back to OSPL? or can I just send it like this with HSPL?
Its simple. Download and install original ROM
Petulinek said:
Its simple. Download and install original ROM
Click to expand...
Click to collapse
Can you give me the download link please?
So do I have just to flash the SPL from http://forum.xda-developers.com/showthread.php?t=1684912 (2.05), and then go to Software update mode (Power on + volume down) and install latest update from Zune??
Here is the link: http://www.mediafire.com/?8cgddq89fs48wg6 (PasswordDAVIET)
ETERNITY_Tango_00_S_HTC_4.06.401.03_R_17.5006.08.2 7_17.08.50.06 (Tango)
Thanks guys you are very helpful
Petulinek said:
Its simple. Download and install original ROM
Click to expand...
Click to collapse
It's downright frightening how easy it is to return to OSPL and stock!
Related
Hello all
Just got hold of one of these the unit starts to the screen where it says welcom to t-mobile and with a small letters in the bottem right hand corner stating G R 5.01.16 i assume that this is the rom version. I have added a pic of the screen, Apprently it will only get to this screen, ((im new to xda;s) i work with normal pda;s not the phone type sorry) Now is this the boot loader screen and if so can i use the sd card way to fix it. If not can anyone give me any ideas? many thanks. I have added a pic of the screen
Regards Andy
This is the bootscreen.
Looks like you have a corrupt GSM part.
Try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
LumpiStefan said:
This is the bootscreen.
Looks like you have a corrupt GSM part.
Try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
Click to expand...
Click to collapse
I have the same problem. Trying to download the asks me for a password (?)
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
How to fix GSM Error Problem ....
Rudegar said:
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
Click to expand...
Click to collapse
Thanks, Rudegar.
Another question: The instructions say - among other points:
1. Download the XDA-DevelopersROM Version 1.1
2. Install the ROM on your Device via SD-Card and bootloader.
Is this mandatory? I mean, to install this special version? Or would it suffice, if one has upgraded with another ROM from lumpistefan's site?
Inhowfar differs this ROM from others?[/code]
Re: How to fix GSM Error Problem ....
Krischu said:
1. Download the XDA-DevelopersROM Version 1.1
2. Install the ROM on your Device via SD-Card and bootloader.
Is this mandatory? I mean, to install this special version? Or would it suffice, if one has upgraded with another ROM from lumpistefan's site?
Inhowfar differs this ROM from others?
Click to expand...
Click to collapse
Don´t know why, but this ROM is one of only one, that is booting complete with a malfunction GSM-part.
So i would recommend to use this.
After your system is fixed, you could change to every ROM Version....
Stefan
re My original post
Hi All
many thanks for the reply's The unit should be here in the morning so I will let you know how I get on. Again many thanks, This is a very freindly group
regards andy
Krischu, password is xda, that works for me anyway.
Hi
I cant downgrade my tytn to wm5
Somebody help me?
Thank you.
Please click on the mrvanx guide at the bottom of my signature the answers are there.
hi,
but where I make download the RUUWrapper.exe (CustomRUU by olipro)?
where is the download file??
?????????????????
PLEASE relax and read through THE GUIDE. All download links are there for you to use.
pauloinho said:
Hi
I cant downgrade my tytn to wm5
Somebody help me?
Thank you.
Click to expand...
Click to collapse
Have you simply tried downloading your carriers official ROM?
I tried the WM6 Black Dymond 3.5 ROM, and think because of some quirks I want to just load the Carrier ROM back uon. Do I need to follow this guide? or can I just re-flash back to the AT&T ROM?
Brese said:
I tried the WM6 Black Dymond 3.5 ROM, and think because of some quirks I want to just load the Carrier ROM back uon. Do I need to follow this guide? or can I just re-flash back to the AT&T ROM?
Click to expand...
Click to collapse
No, no need to follow the guide for what you want to do. Just get the AT&T ROM and flash it normally. Voila!
Sweet! That is some ingenuity!
when im tried to download it appears this message"Invalid Attachment specified. If you followed a valid link, please notify the administrator"
Sorry for my english
pauloinho said:
when im tried to download it appears this message"Invalid Attachment specified. If you followed a valid link, please notify the administrator"
Sorry for my english
Click to expand...
Click to collapse
What link are you trying? Send it over.
@TaurusBullba
If the OP updated to HardSPL the RUU exe wont recognise the SPL version and he will get a 260 error, also the possibility of a 'NO GSM' Brick is there if the radio BL has been updated to 108...the guide rebuilds the nbh into an OS only nbh and uses customruu 4.3 so the new SPL is detected and the current radio version is retained.....
... if the op hasnt updated to HardSPL they REALLY should before continuing :s
Ahh... good call. I hadn't thought about if he had used HardSPL.
You are the Guide Master, SirVanx!
Point taken and I now shall go hide under my rock...
mrvanx said:
@TaurusBullba
If the OP updated to HardSPL the RUU exe wont recognise the SPL version and he will get a 260 error, also the possibility of a 'NO GSM' Brick is there if the radio BL has been updated to 108...the guide rebuilds the nbh into an OS only nbh and uses customruu 4.3 so the new SPL is detected and the current radio version is retained.....
... if the op hasnt updated to HardSPL they REALLY should before continuing :s
Click to expand...
Click to collapse
LOL sorry, i was a tad crabby last night (no sleep).
@pauloinho
Have you managed to do it?
?
Please, don't beat me for my stupid and annoying question - trying to find this information, and not only me, but unfortunately without success
Is there some way, how to downgrade HardSPLs to normal SPL, f.e. 1.04, because of warranty?
If this was solved, please, give me direction
mrvanx said:
LOL sorry, i was a tad crabby last night (no sleep).
@pauloinho
Have you managed to do it?
Click to expand...
Click to collapse
Mrvanx send me the soft. RUUWrapper.exe (CustomRUU by olipro) and the Dutty's Good NBH Tool to my email.([email protected])
Thank you
pauloinho said:
Mrvanx send me the soft. RUUWrapper.exe (CustomRUU by olipro) and the Dutty's Good NBH Tool to my email.([email protected])
Thank you
Click to expand...
Click to collapse
Dude the software is linked to in the guide, if you READ IT you will find all you need.
mrvanx said:
Dude the software is linked to in the guide, if you READ IT you will find all you need.
Click to expand...
Click to collapse
How????
The RUUWrapper.exe (CustomRUU by olipro) and the Dutty's Good NBH Tool link is not working
It appears this message"Invalid Attachment specified. If you followed a valid link, please notify the administrator"
try again now
mrvanx said:
try again now
Click to expand...
Click to collapse
Tanks mrvanx,the Custom RUU V4.3 its workin.
But the dutty's good NBHTool v1.1 still not working, appears this message"You do not have the required permissions to view the files attached to this post. "
this rom is china mobile offial ,if u want to flash this OS, make sure your phone's spl is hard spl ,hard spl is 7.77.7777
if your oxygen's spl is not 7.77.7777,you can use the dopod310hspl tools to flash it .
it's danger to flash the China Mobile offial ROM if your spl is not hard spl!!!!
your phone may be dead!
good luck !
http://20.dc.ftn.qq.com/ftn_handler...108595b0b0d57155e035050030d12677e28184b031332
and the pick-up code is 251e69ba
but it's chinese character only
noto1985 said:
but it's chinese character only
Click to expand...
Click to collapse
no no no ,it also contains English! u can change language in sittings.
What about the known activesync-issue in this rom?
raymondma said:
no no no ,it also contains English! u can change language in sittings.
Click to expand...
Click to collapse
i prefer to love to get a REAL 6.1 core system in hand
will I be able to use SSL-encrypted exchange with this rom? in case I use zfree I wont.
please report experiences
cheers
merry xmas
raymondma said:
this rom is china mobile offial ,if u want to flash this OS, make sure your phone's spl is hard spl ,hard spl is 7.77.7777
if your oxygen's spl is not 7.77.7777,you can use the dopod310hspl tools to flash it .
it's danger to flash the China Mobile offial ROM if your spl is not hard spl!!!!
your phone may be dead!
good luck !
http://20.dc.ftn.qq.com/ftn_handler...108595b0b0d57155e035050030d12677e28184b031332
and the pick-up code is 251e69ba
Click to expand...
Click to collapse
The link you offerd can not be connected, Can you give me an anoher one.I need it.
Thank you
Emai:[email protected]
and me too please!!!
[email protected]
china mobile rom please...
please give me link to download cmc rom for oxygen..
the like doesnt work there
please
any one please link me
[email protected]
i would be thank ful....plz
how can i know wich ruu is my correct one to my phone??
i did wipe in mastike my rom
and i want to get the stock rom back and all my beckups are deleted ]=
how i supposd to know now wich one is good for me??
i did buget the phone fron handtec.com
i live in israel
using gsm networks...
android 4.1.1
i remmber just that my framework numb was 1.14
thats all...
somone can recomnded me what to do plz? ]=
ShadowSide said:
1.14.401.16 FOUND IT
but 1.14 its old frameware no?
]=
now somone can give me link that acctualy working to this? ruu
Click to expand...
Click to collapse
http://www.htcruu.com/?dir=Endeavour_C2
Download the RUU_ENRC2B_U_JB_45_HTC_Europe_1.14.401.16_Radio_3.1204.167.31_release_290405_signed.exe
i did it now and im in bootloop
]=
i can flash back old ver? cuz i cant ]=
1. put your device in bootloader - fastboot mode
2. relock the bootloader - command fastboot oem lock
3. select reboot bootloader
4. run the RUU
its dosnt let me run the ruu cuz he was the older ver... now i need the 1.16.401.6 ruu to go on...
and i dont have it .. i found one link but this link takes me to download site that need 12$ to download...
can u help me find good link with 1.16.401.16 with setup.exe??
tank u very much...
i did flash now revultion hd 5.1
but i want the stock one so its will realy help me [=
ShadowSide said:
its dosnt let me run the ruu cuz he was the older ver... now i need the 1.16.401.6 ruu to go on...
and i dont have it .. i found one link but this link takes me to download site that need 12$ to download...
can u help me find good link with 1.16.401.16 with setup.exe??
tank u very much...
i did flash now revultion hd 5.1
but i want the stock one so its will realy help me [=
Click to expand...
Click to collapse
Still the same link that I gave you earlier... http://www.htcruu.com/?dir=Endeavour_C2 download RUU_ENRC2B_U_JB_45_HTC_Europe_1.16.401.6_Radio_3.1204.168.32_release_297177_signed.exe
ckpv5 said:
Still the same link that I gave you earlier... http://www.htcruu.com/?dir=Endeavour_C2 download RUU_ENRC2B_U_JB_45_HTC_Europe_1.16.401.6_Radio_3.1204.168.32_release_297177_signed.exe
Click to expand...
Click to collapse
tnx i will try and tell you if its worked out []=
work as a charm
yey tnx [=
but still the battry issue is on... getting drayind 100%-0 in 2-3 huers of using screen
Hello Guys , i just bought a new Lenovo z5 from Aliexpress it came with flashboot unlocked and rooted i felt insecure with that , so i tried to lock the flashboot and unroot it ...
but now it's not turning on and this message appears
"Your device is corrupt. It can't be trusted and will not boot
Visit This link on another device : g.co/abh"
Any help please
I have the same problem, the saddest thing is that aliexpess of disregard, and the store that oo you bought tambien.esto is a fudge, just wait until lineage makes you compatible to the z5
i have found the solution
Novatronia said:
I have the same problem, the saddest thing is that aliexpess of disregard, and the store that oo you bought tambien.esto is a fudge, just wait until lineage makes you compatible to the z5
Click to expand...
Click to collapse
just flash this Official Rom : bit. ly /2Qjijzq
and flash it with : bit. ly /2wYLpfG
then you should be alright
ps : Flashboot must be locked
if you use qpst/qfil (which is whst you should be doing) to reflash stock rom it is not nessery to relock the bootloader.
ota also works even tho it tells you it does not, but when you get the notification of an update, you can press update and it will install, but the tool for manualy checking does not work.
mousstq said:
just flash this Official Rom : bit. ly /2Qjijzq
and flash it with : bit. ly /2wYLpfG
then you should be alright
ps : Flashboot must be locked
Click to expand...
Click to collapse
Links not found
diogooskamarada said:
Links not found
Click to expand...
Click to collapse
look in this thread, there are all the links you need.
The thread is to install custom rom, but since you need stock qpst, find it in this thread.
https://forum.xda-developers.com/project-treble/trebleenabled-device-discussion/-t3840839
try this link
https://mega.nz/#F!ndhjkT5T!TZ2Gy-HJhJLO_j_GpaNf4A
Check out this video on how to use Qfil
https://youtu.be/TdkNaKpiiUw
rendroid15 said:
look in this thread, there are all the links you need.
The thread is to install custom rom, but since you need stock qpst, find it in this thread.
https://forum.xda-developers.com/project-treble/trebleenabled-device-discussion/-t3840839
try this link
https://mega.nz/#F!ndhjkT5T!TZ2Gy-HJhJLO_j_GpaNf4A
Check out this video on how to use Qfil
https://youtu.be/TdkNaKpiiUw
Click to expand...
Click to collapse
I was able to pass the rom, before installing `` gapps.img`` install TWRP, soon after installing the gapps and soon after the supersu, everything via twrp. It worked for me.
*But the following problems appear in the system:
*WI-FI does not start
TWRP is encrypted after flah supersu
SENSORS giroscopico, bussula, metal detector, and others does not work.
Bluetooth tranferencias is also bugged.
Now I want to go back to the stock rom, but all roms are in boot loop `` LENOVO screen FLASHING OR STOPPED``
I can only keep the custom rom. And now someone to help? I need to at least recover the WI-FI.
Are you using qpst/qfil to reflash stock 3.9.075?
sth0r said:
Are you using qpst/qfil to reflash stock 3.9.075?
Click to expand...
Click to collapse
Yes