Hi,
After a failing to update my OS to JellyBean and losing my IMEI number, I've now got to the point where I can only boot into download mode and can't even get into CWM recovery mode! I'm trying to flash a ROM to it using ODIN but it keeps failing with the info below. Please can somewhere point me in the right direction!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> cache.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
glenf said:
Hi,
After a failing to update my OS to JellyBean and losing my IMEI number, I've now got to the point where I can only boot into download mode and can't even get into CWM recovery mode! I'm trying to flash a ROM to it using ODIN but it keeps failing with the info below. Please can somewhere point me in the right direction!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> cache.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I9100G or I9100?
If I19100G try another usb port/cable/pc.
It's an I9100, I've just tried a different port and it still failed - do you think it's worth trying a different cable too? It takes about 5 minutes before it fails.
Thanks
Well...you're flashing an I9100G ROM there.......get a I9100 ROM.
Sent from the little guy
I've tried these ones so far:
GT-I9100_XEU_I9100XWLPT_I9100XEULPA_I9100XXLQ6_Original
I9100GXXLSR_I9100GXEFLSR_XEF
I9100XWLS8_I9100FOPLS3_FOP
are they all I9100G ROMs?
Thanks
fop and lq6 are I9100.
Sent from the little guy
They're all producing the same error... any ideas? Or have I completely knackered it?!
Thanks
Could be nand corruption, keep trying:
Original s2 cable
clean uninstall kies and reinstall (your uninstaller pro or similar)
Another Pc/laptop
Disable antivirus
Usb ports
Flash siyah v5
3 different odin versions.
Sent from the little guy
kies should be off
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from the little guy
Related
hi, I can access clockworkmod/odin mode but nothing will flash to the flipping phone, is this a semi brick???
I cannot access internal memory or format internal memory!
Am I screwed?
if you can enter download mode, you are not screwed. just flash a stock rom via odin. :good:
What recovery ??
jje
sriram231092 said:
if you can enter download mode, you are not screwed. just flash a stock rom via odin. :good:
Click to expand...
Click to collapse
Cannot flash stock rom
why not? provide info.
Glebun said:
why not? provide info.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://dl.dropboxusercontent.com/u/6396156/2013-06-01 03.57.21.jpg
Keep getting these kind of errors!
you said, you cannot flash stock ROM via Odin. I asked why not, and you're showing me pictures of recovery, why?
Sent from my GT-I9300 using Tapatalk 4 Beta
Glebun said:
you said, you cannot flash stock ROM via Odin. I asked why not, and you're showing me pictures of recovery, why?
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Sorry, was not near the computer:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMC2_I9300METEMC1_I9300XXEMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Above was with odin3V1.85
Below is with Odin3V3.07:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMC2_I9300METEMC1_I9300XXEMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Reads as possible bad file flashed .
Or a damaged NAND = new motherboard required .
jje
Tried multiple files, no joy, samsung wont even look at the phone because of the binary counter
Am I screwed?
slim19198 said:
Tried multiple files, no joy, samsung wont even look at the phone because of the binary counter
Am I screwed?
Click to expand...
Click to collapse
No pay for a repair or see multiple changed motherboard posts and DIY .
jje
I've flashed the Stock ROM for my phone 3 times (I think it's Vodafone for UK - but not 100% sure)..
All completes and Odin says successful. I reboot and my phone doesn't get past the first 'Samsung Galaxy SIII GT-I9300' logo. I've flashed and rooted many phones in the past, including both my sons S3's, my daughters S3 (this one) and my HTC One M7.
I've re-rooted the phone (so recovery.img installs) and I can load Philz Recovery on it no problem - CWM or TWRP better for this situation?
My findings manually in Philz Recovery so far...
Formatting /system - Works OK
Formatting /cache - Works OK
Formatting /preload - Works OK
Formatting /data - Reboots phone almost instantly.
unmount /data -> Formatting /data - reboots phone almost instantly.
When I try to install a custom ROM 'Formatting /data' reboots the phone and I'm stuck at the Sammy logo again.
Is my /data partition screwed? Is there a way to check?
I want to make certain because I do not want to use a PIT file unless it is the last resort. Is there an alternative route.
Re partition just /data perhaps using adb?
After installing the Stock ROM I cannot get into Stock Recovery, but if I root, I can get into custom recovery.
Odin/Download mode working fine still.
Very odd... Any pointers?
Any assistance hugely appreciated.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300VFGGNB1_I9300BUUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> tz.img
<ID:0/005> sboot.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
Reboots to set things up, gets halfway then reboots and gets stuck in a reboot loop with this on the screen -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Feels like the /data partition is screwed beyond repair, but I'm hoping not. Can I recreate it somehow?
Thinking this phone needs a new EMMC, but I do not understand why this happens -
(Yes, I added the PIT this time).
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMC3_I9300NEEEMC1_I9300XXEMB6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005> system.img
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
All goes as it should. No complaining until it reboots.
Still stuck at Android on his back with Red Triangle Warning.
This phone has been a mission.
I've just run it all again, this time, with Erase NAND selected. I figured it was do or die time... Data wouldn't format no matter what I tried so figured wipe out the NAND completely and try to recreate the partitions...
WIN! Phones is back in one piece working a treat. Odd problem, but glad I documented everything I did here. Maybe it'll help others in the future.
Installed Philz Custom Recovery, and ARHDv51. All working perfectly now.
Okay so i used a modem upgrade ML1 to flash a rom, Now my wireless is useless.
I have other phones same make/model/series that I can get the modem info from but I don't know how to do it. Any help would be appreciated.
http://forum.xda-developers.com/showthread.php?t=2583217
https://www.dropbox.com/s/mw95pt9u6wue33t/S960L.zip
es0tericcha0s said:
http://forum.xda-developers.com/showthread.php?t=2583217
https://www.dropbox.com/s/mw95pt9u6wue33t/S960L.zip
Click to expand...
Click to collapse
i already tried the first thread im trying the drop box now thank you
Both files end up in "installation aborted"
You're using Odin, right...?
es0tericcha0s said:
You're using Odin, right...?
Click to expand...
Click to collapse
I have ODIN but i dont know how to use it i thought they were zip installs from recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_S960LWYAMD6_S960LTFNAMD6_1151419_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Did you run Odin as admin? I'd try Mobile Odin to just flash the modem file in the other zip.
After running as admin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_S960LWYAMD6_S960LTFNAMD6_1151419_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm not sure if this is considered the "boot loop" but i was away from my phone for a while and when i got back it was only displaying the text like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now since then i can boot into download odin mode (Vol down+power+home) but not the restore mode (Vol up+power+home).
So I tried flashing the sch-i605-16gb.pit and I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar and it seemed to have gotten stuck during the process. So i tried just tried the PIT file alone:
Code:
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
And it just sits there and then says it cant write. (the box says Set Partition until it FAILS).
So i try both the PIT and the ROM again:
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
And again, it just sits there doing nothing. The box says Set Partition.
If I just try to flash the ROM file this is what happens:
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011>
<ID:0/011> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
This time it doesn't just sit there - it does all that really quickly and the box then has FAILS.
So I decide to try to see if the recovery (Vol up+power+home) worked by chance... It didn't.
So I tried booting it up normally and now instead of the Samsung Text Logo I now, lucky me, get this:
I was running 4.3 rooted and all was fine... I have no idea what went on while I was away from my phone.
This is what my download mode looks like:
So as my last resort I try Samsung Kies and place the phone, yet again, in download mode. Kies starts up and tries to connect to it but never does.
Naturally this would happen when the phone is no longer under warranty... I've had it over 3 years now... So if anyone could be of any assistance with this problem I would greatly appreciate it!
Mine is there too. Friggin stuck at the Samsung screen. I can flash with odin and it even says successful-but-nah. Stuck at Samsung screen.
Wtf
It would be great to get some help with this!
bump.....
I finally got mine to boot.
In Odin I checked the re-partition and the nand erase all boxes. I also had a bootloader file I used stock_mc3_recovery.tar.md5 but I don't know if it was necessary. If you need it let me know.
Also, and I don't know if this matters, I odin'd from an administrator account on Windows. Previously I had only tried to use a normal user account.
This ****ing thing. I've flashed and flashed and refreshed. I finally said **** it and bought a new phone. Now it works.. Haha. Just my luck.
Sent from my Nexus 7
Yeah if you could send me all the files you used then that would be great.
I've been told (by eBay phone repair people) that it sounds like my phone just did the "sudden death syndrome" or SDS that deals with the eMMC or something like that.
I just realized you're installing mj9. Is your bootloader locked? Mine never was officially updated to mj9 so I had to Odin 4.1.2 (I think)
Sent from my Nexus 7
Yeah its locked.
Been trying to flash 4.3 from ODIN.
Oh, ****, sorry. Well, try the nand erase option and see I'd that helps. After that, reboot into your stock recovery and factory reset.
If you haven't already of course. Hope someone comes along soon to help you out.
MotoXde cm12
Hi there
Got strange problem with my friend's Galaxy S2 I9100.
One day it gone hot and then turned off. Now it stucks in Samsung Galaxy SII logo and when I get into recovery I have a lot of red warnings (photo below):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to flash stock ROM, but Odin can't flash it:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XXMS7_I9100OXAMS7_I9100XXMS2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried on Odin 1.3, 1.83, 1.85 and 3.09 - all the time the same error.
Tried to flash PIT file with KI3 3-file firmware but..
Code:
<ID:0/025> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/025> Odin v.3 engine (ID:25)..
<ID:0/025> File analysis..
<ID:0/025> SetupConnection..
<ID:0/025> Initialzation..
<ID:0/025> Set PIT file..
<ID:0/025> DO NOT TURN OFF TARGET!!
And nothing else.......
Phone gets into Download Mode or stucks in Samsung Galaxy SII logo.
Now I can't get into recovery :/
As my friend told me, he had Android ICS on it so I think he had insane chip with brickbug.
But.. he didn't flash any custom roms, custom kernels etc. He only upgraded his i9100 from GB to ICS.
Any ideas? :crying: :crying: :crying: :crying:
Unfortunately, I think your motherboard is fried. The only thing that may help is repartitioning as a final resort, but I would say you are up for a new motherboard or phone
Re-partioning is impossible :/
Wysłane z mojego SM-G900F przy użyciu Tapatalka
Not necessarily true.......
There is a thread somewhere on XDA that details a process where the corrupted memory blocks can be discovered and bypassed.....effectively repartitioning the memory.......
Sent from my rooted, debloated stocKK kn0x0 SM-G900F
But I cant re partition
Wysłane z mojego SM-G900F przy użyciu Tapatalka
Ah.....My bad....The process I mentioned relies on the ability to get into recovery....and you said you can't.......
BTW......Your user name @Bruce666
not referencing a metal band by any chance?
Bruce (Dickinson)
666 (The Number of the Beast)
Sent from my rooted, debloated stocKK kn0x0 SM-G900F
keithross39 said:
Ah.....My bad....The process I mentioned relies on the ability to get into recovery....and you said you can't.......
BTW......Your user name @Bruce666
not referencing a metal band by any chance?
Bruce (Dickinson)
666 (The Number of the Beast)
Sent from my rooted, debloated stocKK kn0x0 SM-G900F
Click to expand...
Click to collapse
no I'm not referencing anything and anyone