Sup guys.
I need some help.
I'm a Cyanogenmod user for a long time, been using 4.2.2 nightlies for some time already without any problems.
But after flashing XXMS2 modem from this topic, my WIFI went DEAD.
Flashed it normaly from CWM.
After the problem i tryed about everything, including flashing original rom from samsung via Odin, tryed my older modem (LQ6), nothing seems to get WIFI to work again.
Now im back to 4.2.2 CM 10.1 Nightlies but still have the problem.
WIFI is greyed out on the settings menu, completely dead.
3G connection and calls work fine.
Any help would be welcome. Thanks.
Maybe u could try running a ROM wipe/nuke script and flash CM again? Or try a different kernel...
"To err is human, to forgive is divine"
Sent from my SGS II
Check your efs folder see if you wifi is there and as it should be. Sounds curupted. Easy fix
Look for thread
I9100
alliance 7.2
v6
nekf2
AW: Dead Wifi on i9100
Which Kernel are you using? If you are using dorimanx, you must tap the toggle 3 times to get wifi working. Works for me at least^^
sent with my homing pigeon
ansrewwrightt said:
Check your efs folder see if you wifi is there and as it should be. Sounds curupted. Easy fix
Look for thread
I9100
alliance 7.2
v6
nekf2
Click to expand...
Click to collapse
Thanks for your reply.
Is there any 'safe' way of doing this ? Without messing up anything else ?
johnmambo said:
Thanks for your reply.
Is there any 'safe' way of doing this ? Without messing up anything else ?
Click to expand...
Click to collapse
I believe most of the methods here on XDA are safe, as long as u read the instructions carefully.
Search for 'corrupted efs' or 'recover imei' threads, and you will find what you are looking for.
I don't know how u can mess up anymore than this, but if u are so concerned, take a backup before u try anything.
"To err is human, to forgive is divine"
Sent from my SGS II
johnmambo said:
Thanks for your reply.
Is there any 'safe' way of doing this ? Without messing up anything else ?
Click to expand...
Click to collapse
Ktool or gs2 repair. Or copy and paste wifi from bkup folder to currupted one. Make sure your imei is bked up before anything! Or nandroid restore should easy restore your wifi
P.s some roms
switch of your wifi from install
I9100
alliance 7.2
v6
nekf2
---------- Post added at 03:41 PM ---------- Previous post was at 03:33 PM ----------
Didyou flash the ril in the modem aswell? Don't unless you no how.
I9100
alliance 7.2
v6
nekf2
Related
hi
i have installed siayh kernel v6 on s2 4.2.2 rom and after i did restart the log of the kernel appear then the screen become black and the phone don't start but i still can enter recovery mode and download mode
i try two versions of siyah kernel and it the same problem how can i make it work without problem ?
cobra-mr said:
hi
i have installed siayh kermyself.
on s2 4.2.2 rom and after i did restart the log of the kernel appear then the screen become black and the phone don't start but i still can enter recovery mode and download mode
i try two versions of siyah kernel and it the same problem how can i make it work without problem ?
Click to expand...
Click to collapse
Im currently trying to find a solution/answer to this myself
My friend has an s2 and no matter what kernel or version he tries the same problem results.
Done all the correct procedures for ROM gapps and kernel flashes, tried reboots and re flashes but the black screen appears after the kernel boot picture.
wmhsgs3 said:
Im currently trying to find a solution/answer to this myself
My friend has an s2 and no matter what kernel or version he tries the same problem results.
Done all the correct procedures for ROM gapps and kernel flashes, tried reboots and re flashes but the black screen appears after the kernel boot picture.
Click to expand...
Click to collapse
if you found a solution tell me ok
and if i find one i will tell you
If you are on CM 10.1 , which is android 4.2.2 , siyah kernel dosent support it. Try dormanix or the CM kernel.
Sent from my GT-I9100 using xda app-developers app
cobra-mr said:
hi
i have installed siayh kernel v6 on s2 4.2.2 rom and after i did restart the log of the kernel appear then the screen become black and the phone don't start
Click to expand...
Click to collapse
Siyah v6 doesn't support JB 4.2.2. But siyah v5 vsync does..
"To err is human, to forgive is divine"
Sent from my SGS II
OK thanks guys. Will try dorminax first.
wmhsgs3 said:
OK thanks guys. Will try dorminax first.
Click to expand...
Click to collapse
Good luck and let us know how it turns out..
"To err is human, to forgive is divine"
Sent from my SGS II
Will be tomorrow when I'm at work with my mate. Thanks again!
yes thats worked fine on the 4.2.2 AVATAR ROM but says the ISP is outside of our location, UK.
wmhsgs3 said:
yes thats worked fine on the 4.2.2 AVATAR ROM but says the ISP is outside of our location, UK.
Click to expand...
Click to collapse
Good to know it worked! :thumbup:
Please add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
Soare23 said:
If you are on CM 10.1 , which is android 4.2.2 , siyah kernel dosent support it. Try dormanix or the CM kernel.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I tried dormanix and it work
THanks a lot
cobra-mr said:
I tried dormanix and it work
THanks a lot
Click to expand...
Click to collapse
Good for u!
Please add [SOLVED] to the title of ur post so that others with similar problems can get help.
"To err is human, to forgive is divine"
Sent from my SGS II
Hallo,
i can not manage to flash rom.
followed intructions in this video:
http://forum.xda-developers.com/showthread.php?t=1499331
now i have root/superuser
then i installed clockworkmod rom manager
selected i9100 in list.
copied the avatarmod to root of my sdcard
reboot into recoverymodus
wiped factory/cache
then...searched for the rom on sdcard....NOTHING.
reboot, now my phone is fresh, clockwork not there anymore.......
PLZ HELP
im even to stupid to follow tutorials OMG (((((((((((
Re: [Q] Help im to stupid to flash a costum rom
revnu said:
reboot, now my phone is fresh, clockwork not there anymore.......
Click to expand...
Click to collapse
As quoted from the thread u followed:
"If all you need is a rooted Galaxy S2 (without ClockworkMod Recovery), you can use this method"
So there will be no CWM recovery...
"To err is human, to forgive is divine"
Sent from my SGS II
---------- Post added at 08:28 AM ---------- Previous post was at 08:04 AM ----------
revnu said:
now i have root/superuser
then i installed clockworkmod rom manager
selected i9100 in list.
copied the avatarmod to root of my sdcard
reboot into recoverymodus
wiped factory/cache
then...searched for the rom on sdcard....NOTHING.
Click to expand...
Click to collapse
Did u flash CWM recovery from ROM Manager? If not, u still have stock recovery!
Stock recovery can only flash zips on the external sd card, not internal sd.
"To err is human, to forgive is divine"
Sent from my SGS II
---------- Post added at 08:30 AM ---------- Previous post was at 08:28 AM ----------
I would advise against using ROM Manager to flash CWM as many people have reported problems using it..
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
As quoted from the thread u followed:
"If all you need is a rooted Galaxy S2 (without ClockworkMod Recovery), you can use this method"
So there will be no CWM recovery...
"To err is human, to forgive is divine"
Sent from my SGS II
---------- Post added at 08:28 AM ---------- Previous post was at 08:04 AM ----------
Did u flash CWM recovery from ROM Manager? If not, u still have stock recovery!
Stock recovery can only flash zips on the external sd card, not internal sd.
"To err is human, to forgive is divine"
Sent from my SGS II
---------- Post added at 08:30 AM ---------- Previous post was at 08:28 AM ----------
I would advise against using ROM Manager to flash CWM as many people have reported problems using it..
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
THX 4 help.....
ok it looks like I at least didnt damage anything.
So, now im rooted like this method........but I heared about this problems with CWM too. So I try to read more and make it with ODIN
Can you perhaps point me on a good tut 4 for flashing with Odin if root is already there ?
There are so many tutorials and I find it kind of confusing which to follow.
best regards
EDIT: I did do something from CWM......it asked me for my model and I chose I9100. But in the list it was also Galaxy S2, so I was unsure. Then it did something. Did he perhaps flash the wrong revocerymanager and get me problems then going on now flashing with Odin ?
then I booted in the recovery I had the stock-options only
Re: [Q] Help im to stupid to flash a costum rom
I have PMed you. Check your inbox.
"To err is human, to forgive is divine"
Sent from my SGS II
can anyone point me to a idiot-proof tutorial to make my S2 i9100 able to install costum ROMs via CWM ??
I have the Androidversion 2.3.3
revnu said:
can anyone point me to a idiot-proof tutorial to make my S2 i9100 able to install costum ROMs via CWM ??
I have the Androidversion 2.3.3
Click to expand...
Click to collapse
This is if your model if is GT I9100 (not GT I9100g)
Upgrade with pc odin to a newer original samsung firmware (ics or jb) from here
http://forum.xda-developers.com/showthread.php?t=1544487
don't prefer ics 4.0.4 because is a brick bug in that version go for ics 4.0.3 or jb
and after look here how to root and install cwm
http://forum.xda-developers.com/showthread.php?t=1877270
Re: [Q] Help im to stupid to flash a costum rom
vagsvag said:
This is if your model if is GT I9100 (not GT I9100g)
Upgrade with pc odin to a newer original samsung firmware (ics or jb) from here
http://forum.xda-developers.com/showthread.php?t=1544487
don't prefer ics 4.0.4 because is a brick bug in that version go for ics 4.0.3 or jb
and after look here how to root and install cwm
http://forum.xda-developers.com/showthread.php?t=1877270
Click to expand...
Click to collapse
He can just flash siyahs2-v.2.6.14 straight with odin from GB, to get rooted and cwm.
theunderling said:
Hey man, he only needs to do that stuff if hes got a broken usb etc.
He can just flash siyahs2-v.2.6.14 straight with odin from GB.
Click to expand...
Click to collapse
Counter counts 1
Re: [Q] Help im to stupid to flash a costum rom
vagsvag said:
Counter counts 1
Click to expand...
Click to collapse
True.......but a usb jig has been invented.......everyone should have one.
theunderling said:
True.......but a usb jig has been invented.......everyone should have one.
Click to expand...
Click to collapse
HI
my counter is on 3 now....is this a problem, as I dont have warranty any more anyway ?
greetz
Re: [Q] Help im to stupid to flash a costum rom
No, its not a problem, even if you did have warranty.The binary counter and yellow triangle show samsung that something had been flashed to phone, so they can refuse your warranty.
But before you would send it back for warranty, you would remove the signs of flashing.If you cant (like mb bricked); then samsung cant see what you have done.
Anyway, if you were on ICS, you can use triangle away app, and use a jig for GB.And flashing by recovery doesnt add the binary counter, that is why the other chap is recommending that.
You dont need to worry now, but the jig is also handy for booting phone into download mode.....like if your home button is faulty.
theunderling said:
No, its not a problem, even if you did have warranty.The binary counter and yellow triangle show samsung that something had been flashed to phone, so they can refuse your warranty.
But before you would send it back for warranty, you would remove the signs of flashing.If you cant (like mb bricked); then samsung cant see what you have done.
Anyway, if you were on ICS, you can use triangle away app, and use a jig for GB.And flashing by recovery doesnt add the binary counter, that is why the other chap is recommending that.
You dont need to worry now, but the jig is also handy for booting phone into download mode.....like if your home button is faulty.
Click to expand...
Click to collapse
OK thx,
I'm going to flash a german Stock ROM (I9100XWLQ2) now. And after that I study this thread to flash Philz-cwm6 kernel. From there it should be easy to try customROMs like I want.
Thx for the tip with siyah but I think i go this way, because if i manage this I can help a friend to do this too, and he has a newer ROM
Re: [Q] Help im to stupid to flash a costum rom
You can use the method you think whats best for you.
But you should be aware of this;
1.before you do anything make sure you have Odin/drivers installed on your pc in case you need it fast.
2.when you get cwm, do a nand backup and make efs backup.
3.read some guides and have a quick look through the titles in this forum and youll see what goes wrong when you start flashing etc.....LOL
Re: [Q] Help im to stupid to flash a costum rom
revnu said:
my counter is on 3 now
Click to expand...
Click to collapse
I chose to update to ICS first, then root and CWM after that...
So, even after a number of flashes of custom roms and kernels, my counter still rests at 0.
"To err is human, to forgive is divine"
Sent from my SGS II
---------- Post added at 07:58 PM ---------- Previous post was at 07:53 PM ----------
revnu said:
OK thx,
I'm going to flash a german Stock ROM (I9100XWLQ2) now. And after that I study this thread to flash Philz-cwm6 kernel. From there it should be easy to try customROMs like I want.
Click to expand...
Click to collapse
Good to see ur finally getting the hang of it all! :thumbup:
Please add [SOLVED] to the title of ur post, if u successfully flash a custom ROM.
"To err is human, to forgive is divine"
Sent from my SGS II
Hallo,
my Problem is SOLVED !!
What I did:
first flashed german STOCK ROM v4.0.4 via Odin.
Then I used the signed kernel with CWM6 integrated from Philz.....used the stock recovery mode.
Then I flashed the AVATAR-Rom from CWM
HAPPY HAPPY JOY JOY !!!
sry 4 any stress I made.
@mods:
my treads can be deleted if you dont see any worth for others with same problems. I think so, and apoligize
best regards
revnu
Hi can we dual boot alliance rom and JB 4.1.2 stock rom? has anyone tried? if yes kindly let me know the steps.
Dual boot two 4.1.2 stock based ROMs? May I ask why?
"To err is human, to forgive is divine"
Sent from my SGS II
No and no.
i9100
alliance 7.2
dorimanx 8.12
nekf2
Daltonelvis said:
Hi can we dual boot alliance rom and JB 4.1.2 stock rom? has anyone tried? if yes kindly let me know the steps.
Click to expand...
Click to collapse
Here you go some info regarding dual booting
http://forum.xda-developers.com/showthread.php?t=2120514
Also here is a thread with rom's already updated to run as your second rom
http://forum.xda-developers.com/showthread.php?t=2199844
This may not be essentially what you require but I hope it helps guide you either way.
@strictly.mobile:
U know those threads are to dual stock sammy JB with non-sammy roms (aosp/aokp). That is not what the OP asked for, right?
"To err is human, to forgive is divine"
Sent from my SGS II
strictly.mobile said:
This may not be essentially what you require but I hope it helps guide you either way.
Click to expand...
Click to collapse
Hence why I also mentioned above.........
strictly.mobile said:
Hence why I also mentioned above.........
Click to expand...
Click to collapse
I saw that too.
Wasn't blaming u mate...
But there is always a risk that the OP might be a newbie.. he might get confused by those threads and ultimately brick his device or something...
Just a suggestion...
"To err is human, to forgive is divine"
Sent from my SGS II
@immortalneo
No dramas mate, I did see OP was newbie, I guess I should have added a heads up to proceed with caution and ensure you read and fully understand before attempting to dual boot.
Daltonelvis said:
Hi can we dual boot alliance rom and JB 4.1.2 stock rom? has anyone tried? if yes kindly let me know the steps.
Click to expand...
Click to collapse
You can't run two stock roms. Alliance is custom stock. Dev from alliance said no to this working. Asked before. Op wants stock 4.1.2. And alliance. Can't be done. Either way round 1st or 2nd rom it won't work. ATM.
i9100
alliance 7.2
dorimanx 8.12
nels1
Hello people!
I'm glad that i joined this great forum. I have some problems with my SGS2 (i9100). I've researched about this problem for weeks but couldnt get any answer so i feel this situation is appopriate to open a new thread. Let me describe my problem.
I'm running JellyBAM ROM in my i9100. I am not using any external SD card cause i find my internal storage quite enough. Everytime i put or download something to my internal storage (like mp3, picture) that file gets broken. For example i cant download images from WhatsApp because it says the download cannot be completed in my language. If i manage to download one, it gets "black" in few minutes i can only see it for a while. If i get a mp3 by download or bluetooth i can play it first but after 10 mins it cant be opened. Today i tried to backup my all applications using Titanium Backup, root folder of my internal sdcard or any folder in my sdcard, it says this folder is not writable. I tried to set chmod 777 but it doesnt work.
I really need an info about this situation cause i cannot do anything with my phone. Any help will be appreciated.
Thank you very much!
Dif rom? Same thing or can you not download another rom?
----------------------
alliance 7.2
dorimanx 8.12
nels1
i9100
ansrewwrightt said:
Dif rom? Same thing or can you not download another rom?
----------------------
alliance 7.2
dorimanx 8.12
nels1
i9100
Click to expand...
Click to collapse
I can download new roms. I tried to update my JelyBAM to 6.7 and it succeeded. But problem didnt leave.
What about a firmware start a new. May work.
----------------------
alliance 7.2
dorimanx 8.12
nels1
i9100
ansrewwrightt said:
What about a firmware start a new. May work.
----------------------
alliance 7.2
dorimanx 8.12
nels1
i9100
Click to expand...
Click to collapse
Nah it didnt solve the problem mate
LeadMX said:
Nah it didnt solve the problem mate
Click to expand...
Click to collapse
You mean you've used a ROM Wipe/Nuke script, and then flashed a stock firmware?
"To err is human, to forgive is divine"
Sent from my SGS II
What did you give su permission to before this happened? You can change file permission manualy
----------------------
alliance 7.2
dorimanx 8.12
nels1
i9100
immortalneo said:
You mean you've used a ROM Wipe/Nuke script, and then flashed a stock firmware?
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
No lol, I've used stock rom before using JellyBAM. I installed JellyBAM and did not consist any problem for a long time. But suddenly i got my phone to this situation. JellyBAM was working.
ansrewwrightt said:
What did you give su permission to before this happened? You can change file permission manualy
----------------------
alliance 7.2
dorimanx 8.12
nels1
i9100
Click to expand...
Click to collapse
Only apps those have SU permission are:
Xposed Installer, Performance Control, Android Tweaker, Titanium Backup
(Xposed Installer and android tweaker didnt exist in first jellybam version (that I've used long time without problem then i suddenly had this problem with) and i still had those problem)
LeadMX said:
But suddenly i got my phone to this situation. JellyBAM was working.
Click to expand...
Click to collapse
How did things go wrong suddenly? That means its a ROM issue. Clean flash jellybam to solve it. or use another ROM.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
How did things go wrong suddenly? That means its a ROM issue. Clean flash jellybam to solve it. or use another ROM.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Im going to update my rom to jellybam 7.3. Will it solve the problem?
You need to do a full wipe first.
Sent from my GT-I9100 using xda app-developers app
Levo Harkonnen said:
You need to do a full wipe first.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
LOL you will laugh but i formatted everything on my device and lost my rom zip. How can i flash my new rom? I tried to flash with adb sideload but i got that error:
* failed to write data 'protocol fault (no status)' *
What should i do?
LeadMX said:
LOL you will laugh but i formatted everything on my device and lost my rom zip. How can i flash my new rom? I tried to flash with adb sideload but i got that error:
* failed to write data 'protocol fault (no status)' *
What should i do?
Click to expand...
Click to collapse
Do u still have CWM recovery?
"To err is human, to forgive is divine"
Sent from my SGS II
Mate i've installed new version of jellybam using an external sd card. But now because i formatted emmc etc., it doesnt mount internal sd card..
Oh boy.
Sent from my GT-I9100 using xda app-developers app
Look for Thread fix/App remountSd . Looks like mite help you
Worth a try. Simply remounts Sd ext and Int and emmc on boot. Fixs permission
On boot up. Don't no how to post thread link sorry.
----------------------
alliance 7.2
dorimanx 8.12
nels1
i9100
Finally you solved your problem?
LeadMX said:
Bump. I really need help asap..
Click to expand...
Click to collapse
Please don't bump a thread more than once in 24 hours as per the forum rules. Also please do not create 2 threads for exactly the same thing. I have deleted the duplicate.
LeadMX said:
Mate i've installed new version of jellybam using an external sd card. But now because i formatted emmc etc., it doesnt mount internal sd card..
Click to expand...
Click to collapse
What can your phone do now? Dose it switch on ? How come you formatted emmc? From what I read there is no coming bk from this.
----------------------
alliance 7.1
siyah v6.0b5
nels1
i9100
Hello folks, this is my first post Hope to have a solution for my M250S converted to Galaxy S2 which I'm having a problem with.
I'll get to the point straight.
The problem that I'm with S2 is that I'm not able to use mobile data. Even though I've enabled mobile data from settings, No mobile data icon is shown in status bar. I've set up APN settings correctly as well. Did try with different network SIM with correct APN settings. But no luck. I'm talking about either EDGE, HSPA or 3G icon in the status bar (like in attachment below).
But internet via WiFi works fine. Tried flashing a new stock ROM, custom ROM, wiping out cache, factory resetting and turning on "WCDMA only" as well :crying:
Could this be a hardware fault? Or firmware issue (like csc or modem)?
Note : On the first day I purchased the phone, mobile data worked (and it was already converted to i9100). But backside of the phone near camera got overheated. Then I turned mobile data off and switched to wifi. Afterwards I can't remember that I could use mobile data.
Try this thread first:
http://forum.xda-developers.com/showthread.php?t=1097347
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Try this thread first:
http://forum.xda-developers.com/showthread.php?t=1097347
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thanks for the reply. I searched that thread. Someone had mentioned to flash the modem via CWM. So I did flash the correct modem after downloading from here.
http://forum.xda-developers.com/showthread.php?t=1881304
But it hasn't change anything.
Can you make calls?
i9100
alliance 7.3
ansrewwrightt said:
Can you make calls?
i9100
alliance 7.3
Click to expand...
Click to collapse
Yes, everything except mobile data and video calling is possible.
And you have flashed stock rom to start a new?
i9100
alliance 7.3
ansrewwrightt said:
And you have flashed stock rom to start a new?
i9100
alliance 7.3
Click to expand...
Click to collapse
Yes, I flashed the Jellybean stock ROM 4.1.2 (XWLSN) and hoped to get a solution for the problem. But no luck.
.Shifter. said:
Yes, I flashed the Jellybean stock ROM 4.1.2 (XWLSN) and hoped to get a solution for the problem. But no luck.
Click to expand...
Click to collapse
flash another kind of ROM for a test?
.Shifter. said:
Yes, I flashed the Jellybean stock ROM 4.1.2 (XWLSN) and hoped to get a solution for the problem. But no luck.
Click to expand...
Click to collapse
So you can make calls and no data. Just try a restore of your efs. Its a very bad file that can be curupted so easy. Most will have no call but data. See were im coming from on this. Worth a try.
i9100
alliance 7.3
ansrewwrightt said:
So you can make calls and no data. Just try a restore of your efs. Its a very bad file that can be curupted so easy. Most will have no call but data. See were im coming from on this. Worth a try.
i9100
alliance 7.3
Click to expand...
Click to collapse
I heard in some countries, even the generic Samsung IMEI may work for calls or Internet!
@OP: have u verified that ur IMEI number is correct and the same as that below ur battery? (Do not post the IMEI here)
"To err is human, to forgive is divine"
Sent from my SGS II
realpg said:
flash another kind of ROM for a test?
Click to expand...
Click to collapse
I flashed M250S 4.0.4 ROM and after that it works fine. But not with i9100
ansrewwrightt said:
So you can make calls and no data. Just try a restore of your efs. Its a very bad file that can be curupted so easy. Most will have no call but data. See were im coming from on this. Worth a try.
i9100
alliance 7.3
Click to expand...
Click to collapse
I don't know how to do that
immortalneo said:
I heard in some countries, even the generic Samsung IMEI may work for calls or Internet!
@OP: have u verified that ur IMEI number is correct and the same as that below ur battery? (Do not post the IMEI here)
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
There's no IMEI in the sticker under the battery. Just some korean words.
.Shifter. said:
I flashed M250S 4.0.4 ROM and after that it works fine. But not with i9100
Click to expand...
Click to collapse
Maybe you should try another I9100 firmware.
This guide covers how to successfully flash it:
http://forum.xda-developers.com/showthread.php?t=1595225
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
I heard in some countries, even the generic Samsung IMEI may work for calls or Internet!
@OP: have u verified that ur IMEI number is correct and the same as that below ur battery? (Do not post the IMEI here)
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Yes this is true. Just depends on were you are in the world and what network. Funny how sam has made that imei built into the phone.
i9100
alliance 7.3
immortalneo said:
Maybe you should try another I9100 firmware.
This guide covers how to successfully flash it:
http://forum.xda-developers.com/showthread.php?t=1595225
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thanks man. Flashed i9100 4.0.4 ICS stock ROM and it works :good: I think it's a problem with 4.1.2 JB stock ROM and 4.1.2 based custom ROMs
Wonder why it's only my M250S which has faced this problem
ansrewwrightt said:
Yes this is true. Just depends on were you are in the world and what network. Funny how sam has made that imei built into the phone.
i9100
alliance 7.3
Click to expand...
Click to collapse
It's very insecure I suppose not to print IMEI under the battery.
.Shifter. said:
Thanks man. Flashed i9100 4.0.4 ICS stock ROM and it works :good: I think it's a problem with 4.1.2 JB stock ROM and 4.1.2 based custom ROMs
Wonder why it's only my M250S which has faced this problem
It's very insecure I suppose not to print IMEI under the battery.
Click to expand...
Click to collapse
If you havent bked up now is the time
i9100
alliance 7.3
.Shifter. said:
Thanks man. Flashed i9100 4.0.4 ICS stock ROM and it works :good: I think it's a problem with 4.1.2 JB stock ROM and 4.1.2 based custom ROMs
Wonder why it's only my M250S which has faced this problem
Click to expand...
Click to collapse
Glad u sorted it out mate!
Maybe another JB firmware will work out for u. That you can try later.
For now,
And please add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
ansrewwrightt said:
If you havent bked up now is the time
i9100
alliance 7.3
Click to expand...
Click to collapse
immortalneo said:
Glad u sorted it out mate!
Maybe another JB firmware will work out for u. That you can try later.
For now,
View attachment 1885595
And please add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Doing that right away
Problem solved in JB ROM as well. You need to have at least two APNs in order to get mobile data working
.Shifter. said:
Problem solved in JB ROM as well. You need to have at least two APNs in order to get mobile data working
Click to expand...
Click to collapse
Good for u! :thumbup:
Please add [SOLVED] to the title of ur post then.
"To err is human, to forgive is divine"
Sent from my SGS II