Data Recovery for soft brick N7000 - AT&T Samsung Galaxy Note I717

Hi all,
Appreciate if you could help me recover my data.
Recently I have upgraded my N7000 from Official 4.0.4 to Official 4.1.2 but after using for 1 day, it bricked.
Happened while I was using the phone half way, the battery ran out and now my phone is stuck at the Samsung logo.
I tried to reinstall Official 4.0.4 and 4.1.2 with ODIN. Although both successfully installed the ROM it's still stuck at the logo.
Is there a way I can use to recover the data, eg. Photos, SMS, etc?
I have been searching through several forums even this as well. But so far those I have read seem to flash the PIT file which will delete the data.
Is there any ROM I can flash to gain access to the phone's filesystem? I would like to reflash it back to the official ROM to be sent back to Samsung for servicing later. Or is it possible to gain access to the filesystem through ADB?
I'm not sure if this is a case of a damaged EMMC.
Please advice. Any help is appreciated.
Thank you

I am sorry, my friend, but you are in the wrong thread. I believe that perhaps you should try to make sure you have all the right files in order and even do it along with a Youtube video if that helps. Odin should be able to do the trick with the right tar files. I am sorry. Good luck.

Ph0n3D0rk said:
I am sorry, my friend, but you are in the wrong thread. I believe that perhaps you should try to make sure you have all the right files in order and even do it along with a Youtube video if that helps. Odin should be able to do the trick with the right tar files. I am sorry. Good luck.
Click to expand...
Click to collapse
Thanks mate. I'm new to the forum. Didn't notice that there was a N7000 group.
Will move my post there.
Cheers.

Related

[Q] Black Screen Help!

Hi guys, just new to these forums. I was forced to sign up due to my problems. just about 2 days ago i flashed these to my Galaxy Note Korean unit (SHV-E160S):
Tegrak-Kernel-Build-32-for-SHV-E160S-FA09.zip
Tegrak-Kernel-Build-32-for-SHV-E160S-FA09recovery.tar
i used Odin to flash the recovery file then booted into recovery mode to flash the kernel.. im sure i did right because i was able to use superuser and change my boot animation. unfortunately i found another update to the .tar and .zip file. i'm pretty sure its for my phone too so i went ahead and did the same thing. i kinda made a mistake in the process, i think i wiped the cache and all. dunno if i wiped partition but in the end i am only able to go to recovery & download mode. the Note will power up but won't get past the "Galaxy Note" screen. after that i will just be black. it's weird because it can still connect to Odin on my laptop although the screen is still black. is it a soft-brick? right now i'm trying to download an ICS stock rom and will try flashing it with Odin. i someone can help me please do. sorry by the way if this is a Korean Galaxy Note. this is the best category i could post since the AT&T and the SHV-E160S are the same in specs and all. hope someone could help me and spare me the pain from sending my unit for repair!
Sounds like a soft brick.. it seems you flashed perhaps the wrong file the last time otherwise it would be working like the last flash? ..I don't use odin often but I would restore my backup or just start over and use the last files to flash until you find something different
yeah i tried the others. i am able to flash the 1st recovery.tar but i cant seem to copy the .zip kernel because i dont have access to usb
about to flash stock ICS using Odin, hope this works! i just have one file which is a .tar file, hope this is the right file and don't brick!
OMG, i just pissed my pants *kidding*, the flashing of the stock ROM worked! and not onl that, i'm on ICS! all thanks to xda=developers forum for giving me the idea to flash a stock ROM! thanks guys! i'll never root my phone again i'd rather stay safe. thanks for the reply friend! ICS rocks!
Could you give me stock ics rom for e160s? thanks
chelsea123 said:
Could you give me stock ics rom for e160s? thanks
Click to expand...
Click to collapse
WRONG FORUM
plz search next time
at least
or use google
SMDH

[Q] I think I've stuffed up "Badly"!!

Hi Guys,
I'm new to this Forum and very new to Android. I have the Galaxy S2 and while attempting to install Clock Work Mod, following the instructions from GalaxyS2Root, all of a sudden the phone locked up at the Samsung Galaxy S2 sceen with the yellow exclamation mark and that's as far as I got.
With great difficulty, I can get into the recovery screen, but I haven't got a clue, what I can do from here.
Is the phone recoverable, or have I just destroyed a brand new phone? I don't have a rom zip on my sd card, so I couldn't install a new rom from the card.
I have tried everything to get it going again, but I think the more things I try, the worse it gets. I think I have now wiped the existing rom off completely and wiped the caches, all because I was panicing.
I even thought of removing my sd card, putting it into my wifes Galaxy Ace and downloading a replacement rom to it and then try to install the new rom back to my phone.
But guys, I'm really panicing here and don't know what to do!!
Can anybody please help me out, or do I now throw a brand new phone into the garbage?
Thank You.............dixie (Help Please)
dixielee said:
Hi Guys,
I'm new to this Forum and very new to Android. I have the Galaxy S2 and while attempting to install Clock Work Mod, following the instructions from GalaxyS2Root, all of a sudden the phone locked up at the Samsung Galaxy S2 sceen with the yellow exclamation mark and that's as far as I got.
With great difficulty, I can get into the recovery screen, but I haven't got a clue, what I can do from here.
Is the phone recoverable, or have I just destroyed a brand new phone? I don't have a rom zip on my sd card, so I couldn't install a new rom from the card.
I have tried everything to get it going again, but I think the more things I try, the worse it gets. I think I have now wiped the existing rom off completely and wiped the caches, all because I was panicing.
I even thought of removing my sd card, putting it into my wifes Galaxy Ace and downloading a replacement rom to it and then try to install the new rom back to my phone.
But guys, I'm really panicing here and don't know what to do!!
Can anybody please help me out, or do I now throw a brand new phone into the garbage?
Thank You.............dixie (Help Please)
Click to expand...
Click to collapse
Just flash a new firmware via odin.It will be new again
Sent from my GT-I9300 using xda app-developers app
Hello,
You could try downloading the rom required and install using odin.
You will need to make sure you get the right version for your phone and use odin to flash.
I've not done exactly what you have before I got into a simple boot loop and had to re flash. Live and learn I guess!
http://forum.xda-developers.com/showthread.php?t=1457458
Sent from my GT-I9100 using Tapatalk 2
Thin_Bezel said:
Just flash a new firmware via odin.It will be new again
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply,
But how do I connect my phone to Odin and what menu should the phone be in, in the recovery mode?
Doesn't the phone have to be in the download mode?
I can only seem to get into the basic recovery mode, ie volume up + power + home keys.
Regards..............dixie.
Have you tried to get into download mode (volume down + home + power)?
You should be able to do that if you can get into recovery. Once in download mode, connect to your PC, start Odin and choose PDA, then select the tar that you have downloaded (it will be in zip form until you unpack it).
Read some threads about Odin/Download mode before you start and make sure you are happy to proceed.
killall said:
Have you tried to get into download mode (volume down + home + power)?
You should be able to do that if you can get into recovery. Once in download mode, connect to your PC, start Odin and choose PDA, then select the tar that you have downloaded (it will be in zip form until you unpack it).
Read some threads about Odin/Download mode before you start and make sure you are happy to proceed.
Click to expand...
Click to collapse
O'k I did as you told me, but the first strange thing is, when I extract the zip file I get the following: boot.bin, cache, factory fs, hidden, modem.bin, param.lfs, Sbl.bin and zImage.............there is no exe type file!!!
However if I open odin, click on PDA and enter the whole zip file location and press start, everything goes ahead as planned.
I get a "Pass" and the phone restarts, I get the small tune and the blue moving lights on the screen, but then it just jams up, on the S Samsung Galaxy S2 screen. That's as far as the boot sequence goes.......frozen on the Galaxy S2 Screen!!
Any suggestions?
Regards......................dixie.
Pull out the battery, wait a few seconds replace and try to boot again. If that doesn't work, check you have the correct firmware to flash and try again with Odin.
Or have a look at this thread:
http://forum.xda-developers.com/showthread.php?t=1457458
Right, for starters you need to give relevant information if you expect accurate help otherwise you're going to end up screwing your device up.
Which model of S2 do you have?
Which rom do you have? (give link)
Which guide did you follow? (give link)
If you can get into cwm its just a case of "wipe data/factory reset" and then flash custom rom of your choice from sdcard. Just go into cwm>mounts&storage>mount USB (this will mount cards onto PC if connected) so once connected copy your rom across.
I recommend the new wannam lite rom if you want new samsung JB based rom.
If you want to flash via ODIN then you should only be flashing a .tar or .md5 file in PDA section. If your extracting a zip and you get all the files you mentioned in your above reply then you have wrong file.
TheATHEiST said:
Right, for starters you need to give relevant information if you expect accurate help otherwise you're going to end up screwing your device up.
Which model of S2 do you have?
Which rom do you have? (give link)
Which guide did you follow? (give link)
If you can get into cwm its just a case of "wipe data/factory reset" and then flash custom rom of your choice from sdcard. Just go into cwm>mounts&storage>mount USB (this will mount cards onto PC if connected) so once connected copy your rom across.
I recommend the new wannam lite rom if you want new samsung JB based rom.
If you want to flash via ODIN then you should only be flashing a .tar or .md5 file in PDA section. If your extracting a zip and you get all the files you mentioned in your above reply then you have wrong file.
Click to expand...
Click to collapse
O'k thank you for your reply and thank you to the others that replied.
I was using an incorrect rom to flash and an incomplete rom at that!
I downloaded a different rom, extracted the files and flashed with odin. Now I am up and running and have the phone back to full woking order.
That was pretty scarery stuff and I thought I had bricked the phone for ever, I guess a little knowledge is helpful but dangerous, if one isn't sure of what they are doing.
Thank you once again for your help, it was much appreciated. I'll contact you again no doubt, next time I create a stuff up.
Regards.................dixie.
Hi Guys, one last request. I would like to root the phone and after a considerable amount of reading/research, the root file that I require, seems impossible to find. When I do find it and download, the .rar file is empty except for a zImage file!!!
My phone is the Galaxy S2 i9100 running ICS 4.0.3 Baseband Version i9100XXLPQ Kernel Version 3.0.15-i9100XXLPQ-CL223505 Build Number IML74K.XXLPQ.
I bought this phone, while I was visiting China and it has been great, up until I managed to brick it by accident.
Anyway, I apparently need the CF Root for XXLPQ v5.4, which I have downloaded six times, from various sites and every time I extract, it's empty, except for an image file!!!
I live in Australia and use the Telstra Network.....should I change to a more suitable Firmware, or maybe a stable custom rom, or can someone give me a link, for the appropriate working CF Root file?
Much Appreciate and Thank You........dixie.
Ignore the above post guys, a little more reading and I found my mistake.
However, I am still interested in the suggestion of a Custom Rom, which would work successfully, on Australian Networks.
Cheers to All......dixie.
dixielee said:
Hi Guys, one last request. I would like to root the phone and after a considerable amount of reading/research, the root file that I require, seems impossible to find. When I do find it and download, the .rar file is empty except for a zImage file!!!
My phone is the Galaxy S2 i9100 running ICS 4.0.3 Baseband Version i9100XXLPQ Kernel Version 3.0.15-i9100XXLPQ-CL223505 Build Number IML74K.XXLPQ.
I bought this phone, while I was visiting China and it has been great, up until I managed to brick it by accident.
Anyway, I apparently need the CF Root for XXLPQ v5.4, which I have downloaded six times, from various sites and every time I extract, it's empty, except for an image file!!!
I live in Australia and use the Telstra Network.....should I change to a more suitable Firmware, or maybe a stable custom rom, or can someone give me a link, for the appropriate working CF Root file?
Much Appreciate and Thank You........dixie.
Click to expand...
Click to collapse
I'm still new myself here but i'm sure ur phone is already rooted from what u said above. When u boot into recovery does stock recovery load or CWM ? if anything other than stock Samsung recovery then your already rooted.
Also u dont need to unzip the rar file its ready as is.
If ur phone is actually not rooted by far the easiest method is here http://forum.xda-developers.com/showthread.php?t=1501719
u dont need an insecure kernel and theres no risk involved even if u mess up. I was a lil hesitant to root my phone but used that method and all went fine, now i've learned so much in the past 2 weeks i'm flashing other kernels and tried lots of roms.
Peace
AnubuRe said:
I'm still new myself here but i'm sure ur phone is already rooted from what u said above. When u boot into recovery does stock recovery load or CWM ? if anything other than stock Samsung recovery then your already rooted.
Also u dont need to unzip the rar file its ready as is.
If ur phone is actually not rooted by far the easiest method is here http://forum.xda-developers.com/showthread.php?t=1501719
u dont need an insecure kernel and theres no risk involved even if u mess up. I was a lil hesitant to root my phone but used that method and all went fine, now i've learned so much in the past 2 weeks i'm flashing other kernels and tried lots of roms.
Peace
Click to expand...
Click to collapse
Yes thanks for the reply. I discovered that I didn't have to extract the root file, as it was already a .tar (stupid me).
So now I have a rooted phone and the Official ICS version XXLPQ, which is working in Australia, but I have noticed, that most of the time the Network is showing "edge".
All I really have to find now, is a good, stable, custom rom, that will also work in Australia.
A couple of observations....
You don't need "a good stable custom rom that will also work in Australia". Region has nothing to do with how a rom performs/your experience with that rom. If you're having issues with connectivity/you're not happy with data speeds, flashing/trying other modems may help. I suggest you read through this thread, at various times people have discussed which modems have worked well with different carriers (particular modems seem to work well for most people using a particular carrier). You can then search for CWM flashable versions of these modems & test them out until you find one that gives you connectivity you're happy with.
The other observation is you're a bit lacking in the 'basics'. I highly recommend you take the time to read through the guides. Knowing the basics makes it less likely you'll bork your phone at some stage, and that you'll be able to solve any problems that come up in a methodical/logical way (as opposed to guessing).
........a bit!!!!!!
Since you are on 4.0 3 ,why don't you flash the official jelly bean XXLS8 update via odin? Than root it with cf root
Sent from my GT-I9300 using xda app-developers app
O'k thanks guys.:good:
Thin_Bezel said:
Since you are on 4.0 3 ,why don't you flash the official jelly bean XXLS8 update via odin? Than root it with cf root
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Use Siyah kernel v6 beta4 instead.

[Q] Bricked Note 2 i605

So I tried to root my Note 2 today. I had rooted it once before using Casual this past summer, but due to circumstances i had to get a new one.The replacement came in today, and i tried to root it with the same methods. I believe my mistake was using Casual while i had 4.3 installed on my device. I'm not TERRIBLY android savvy, but i knew enough to know that if i ****ed up i should stop while i'm ahead and ask you guys.
tl;dr
Long story short, while using Casual to root my Note 2 with 4.3 on it, i got this message
ERROR: Failed to confirm end of file transfer sequence!ERROR: recovery upload failed!ERROR: Failed to send end session packet!waiting for device
waited for a good 30 minutes, nothing was changing, turned off phone and now it's bricked, looping at the "Samsung Galaxy Note 2" Splash screen.
I believe i have to use Odin for something but i could really use some help and reassurance before i continue.
Needless to say i will be jamming f5 on my thread until everything is resolved!
Thanks in advance!
mzaric said:
So I tried to root my Note 2 today. I had rooted it once before using Casual this past summer, but due to circumstances i had to get a new one.The replacement came in today, and i tried to root it with the same methods. I believe my mistake was using Casual while i had 4.3 installed on my device. I'm not TERRIBLY android savvy, but i knew enough to know that if i ****ed up i should stop while i'm ahead and ask you guys.
tl;dr
Long story short, while using Casual to root my Note 2 with 4.3 on it, i got this message
ERROR: Failed to confirm end of file transfer sequence!ERROR: recovery upload failed!ERROR: Failed to send end session packet!waiting for device
waited for a good 30 minutes, nothing was changing, turned off phone and now it's bricked, looping at the "Samsung Galaxy Note 2" Splash screen.
I believe i have to use Odin for something but i could really use some help and reassurance before i continue.
Needless to say i will be jamming f5 on my thread until everything is resolved!
Thanks in advance!
Click to expand...
Click to collapse
UPDATE: Since i posted this, i tried to flash a stock firmware on Odin (4.1.2 i believe) and it failed halfway through the procedure. with nothing more to be done, i reset my phone, and where before it was just bootlooping, it now shows me an entirely different screen reading "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Since then i have tried a different firmware file, still 4.1.2, Odin get's to the very end of the procedure, and crashes at what i assume is the reboot portion. Desperately need assistance!
You can't flash anything other than 4.3 if you have the 4.3 bootloader.
akellar said:
You can't flash anything other than 4.3 if you have the 4.3 bootloader.
Click to expand...
Click to collapse
OH. That makes a lot of sense....
I will try to flash a 4.3 firmware right now. Will i need some sort of .pit file or something to fix the initial bootloop? Or is that problem just totally blown out of the water at this point?
mzaric said:
OH. That makes a lot of sense....
I will try to flash a 4.3 firmware right now. Will i need some sort of .pit file or something to fix the initial bootloop? Or is that problem just totally blown out of the water at this point?
Click to expand...
Click to collapse
I cant seem to find the file anywhere. Only on terafile via SamMobile, but the download link doesn't seem to work.
What are my options as far as this bootloader go?
Did you look in the general section at the unbricker thread?
Sent from my MB886 using xda app-developers app
palmbeach05 said:
Did you look in the general section at the unbricker thread?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
I did a bunch of searches on the site as i was f****ing my phone up, systematically. Im really sorry if this thread doesn't go here, i just didn't know who else to ask
YES!
Found the proper 4.3 file, flashed it via Odin. Everything is stock and ready. If anybody wishes to help me root it from here or point me in the right direction that'd be great but other than that, thanks for letting me post here and thanks to those who helped me out!
mzaric said:
YES!
Found the proper 4.3 file, flashed it via Odin. Everything is stock and ready. If anybody wishes to help me root it from here or point me in the right direction that'd be great but other than that, thanks for letting me post here and thanks to those who helped me out!
Click to expand...
Click to collapse
Currently the only way to root your OTA 4.3 Note 2 is to use saferoot, read this thread carefully
http://forum.xda-developers.com/showpost.php?p=48392009&postcount=1
Sent from my SCH-I605 using Tapatalk
I found myself in the same situation. Where might I find the PIT file? I can't reboot the phone to get the PIT file because it's soft bricked like mzaric's phone was. I'm using Mac OS X so I'm having to use JOdin3 to flash the stock 4.3 firmware back, but without the PIT file I can't continue and I've searched endlessly to find the PIT file. Also a somewhat related question, I heard JOdin isn't good for flashing big files, but I have no alternative, is the stock firmware which is 1.1gb too big to flash?
EDIT: I sadly didn't search hard enough thank you droidstyle for the guide. But my next question is I'm unsure of what version the phone is because when I originally tried to do the CASUAL unlock I believe it was on 4.1.2, but I think it softbricked to begin with because it was 4.3. Should I just try doing the 4.1.2 and if it doesn't take, retry with the 4.3?
If you flashed n7100 firmware you are screwed. If not just Odin back to stock. You were on 4.1.2 if you were unlocked using casual. Don't go to 4.3
Sent from my SCH-I605 using Tapatalk

At&t stock odin needed fast!!!

ok so i was trying to flash a new modem to my note and accidentally flashed the wrong file now it wont boot but odin still recognizes it. im in need of a stock odin tar to flash via odin to see if it will fix my brick but all the links im finding on the forum are dead.
if anyone has a copy of ANY ROM stock, non stock, rooted, unrooted whatever i would really appreciate the upload!!!!
thanks in advance
rookie407
Rookie407 said:
ok so i was trying to flash a new modem to my note and accidentally flashed the wrong file now it wont boot but odin still recognizes it. im in need of a stock odin tar to flash via odin to see if it will fix my brick but all the links im finding on the forum are dead.
if anyone has a copy of ANY ROM stock, non stock, rooted, unrooted whatever i would really appreciate the upload!!!!
thanks in advance
rookie407
Click to expand...
Click to collapse
On my phone at work and dont have file with me, check the Super Everything thread or run a search. Your not the first to need this.
Need to be careful
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
captemo said:
On my phone at work and dont have file with me, check the Super Everything thread or run a search. Your not the first to need this.
Need to be careful
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Click to expand...
Click to collapse
if your refering to the "all in one stock root rom" thread i've checked that already and all the att links are dead.
Just plug it into KIES and restore to stock, root then install your custom rom.
Rookie407 said:
if your refering to the "all in one stock root rom" thread i've checked that already and all the att links are dead.
Click to expand...
Click to collapse
in General Forums / Super Everything Thread
you did not list your carrier or device in your post, but there is a whole list of options here. I have myself scanned through list and yes am aware many of links are dead, yet this was the 2nd one I checked.
if this is for your device and what you are looking for then you are ready to go.
here is the thread containing the file, first link is up
http://forum.xda-developers.com/showthread.php?t=2261598
if not, check the last post in this thread. you will find a link provided from "developweb", see if that is what you are looking for, be sure to hit his thanks button. I am not going to send one of my files, again simply, because you have not told anyone device or carrier. you have already flashed wrong file once and I don't know how, but I don't want to be responsible for anyone bricking their device.
you have been a member long enough to know what information folks need and long enough to know to read. if you can provide this information, then maybe I can help you further if needed.
good luck and keep us posted
jayinc11 said:
Just plug it into KIES and restore to stock, root then install your custom rom.
Click to expand...
Click to collapse
only problem with that is that the device wont turn on and KIES doesnt recognize it. just tryed to flash a recovery via odin and it failed also... guess im stuck with yet another paper weight.
Rookie407 said:
only problem with that is that the device wont turn on and KIES doesnt recognize it. just tryed to flash a recovery via odin and it failed also... guess im stuck with yet another paper weight.
Click to expand...
Click to collapse
Got you. Well there's a bunch of modems here but you will have to decide your own course. I can't offer any advice on them. Good luck!
Version: 4.1.2
Date: 2013-03-31
PDA: I717UCMD3
CSC: I717ATTMD3
PHONE:I717UCMD3
URL: http://terafile.co/71641c73615e/I717UCMD3_I717ATTMD3_ATT.zip

Have CMW Recover, able to Odin but no OS

Hi, I accidently cleaned the system, data...EVERYTHING really and now I'm having trouble getting an ROM on my GT-P7510 P4wifi. When I turn on the tablet it only gets to the Samsung start screen with a picture of an unlocked lock on the bottom. I am able to boot into CMW recovery and I am able to Odin recoveries like TWRP so I know it is working, but I am unable to Odin an actual ROM. Can someone please give me ideas on how to do this. I am able to Odin different ROMs, Odin says "successful" but when I boot up it goes no further than the Samsung Start Screen with the lock. Thank you for any help.
EDIT: YAHOOO! Got it working. I just had the wrong Stock firmware although many said it was, BUT I downloaded the original from Samsung was a bit hard to locate. I Odin'd and it booted and running 4.0.4. If anyone is having an issue and still able to Odin and would like a copy of this just ask
brie987 said:
EDIT: YAHOOO! Got it working. I just had the wrong Stock firmware although many said it was, BUT I downloaded the original from Samsung was a bit hard to locate. I Odin'd and it booted and running 4.0.4. If anyone is having an issue and still able to Odin and would like a copy of this just ask
Click to expand...
Click to collapse
I did exactly the same thing. And I am having a lot of trouble finding the REAL factory recovery image for Odin. Where did you find it? All I am finding is malware...
Thanks
precisionpete said:
I did exactly the same thing. And I am having a lot of trouble finding the REAL factory recovery image for Odin. Where did you find it? All I am finding is malware...
Thanks
Click to expand...
Click to collapse
PM me and I will send to you.

Categories

Resources