I have a rooted Fascinate from Verizon. I switched to pageplus. We had to use *22801 to program. We tried to get into SPC but code 000000 does not work. I looked in forums and someone said use CDMA and type in 2010031619780721 in the FFFFFFFF area, again, no luck.
I can't send or recieve MMS messages. I am stuck. Would it being rooted before i program have anything to do with this problem??
Any help would be greatly appreciated.
Rooted with CM 7
Beav
MunchNBeaver said:
I have a rooted Fascinate from Verizon. I switched to pageplus. We had to use *22801 to program. We tried to get into SPC but code 000000 does not work. I looked in forums and someone said use CDMA and type in 2010031619780721 in the FFFFFFFF area, again, no luck.
I can't send or recieve MMS messages. I am stuck. Would it being rooted before i program have anything to do with this problem??
Any help would be greatly appreciated.
Rooted with CM 7
Beav
Click to expand...
Click to collapse
I was rooted and running custom roms when I switched over to Page Plus. Did not have to change anything for all to work. I used *22890 to activate and program the phone. *22891 to update the roaming list Also on PP you have to have mobile data turned on for MMS to work.
dukeoid said:
I was rooted and running custom roms when I switched over to Page Plus. Did not have to change anything for all to work. I used *22890 to activate and program the phone. *22891 to update the roaming list Also on PP you have to have mobile data turned on for MMS to work.
Click to expand...
Click to collapse
mobile data is on. Still cant send or receive messages. It's warping my mind. Web will not work on 3g
,,, you may have to do an esn swap,,, IE: switch your account [phone #] over to a different/old phone,,, power down/pull battery on fascinate,,, then switch your account [phone #] back over to this fascinate phone,,, install battery/power up and it should re-initiate everything properly.
It does not cost anything to do this, a pageplus CSR can help you or you can do this with you online account i believe...
.
hhp_211 said:
,,, you may have to do an esn swap,,, IE: switch your account [phone #] over to a different/old phone,,, power down/pull battery on fascinate,,, then switch your account [phone #] back over to this fascinate phone,,, install battery/power up and it should re-initiate everything properly.
It does not cost anything to do this, a pageplus CSR can help you or you can do this with you online account i believe...
.
Click to expand...
Click to collapse
Thanks, I will give it a whirl and let you know the outcome. Thank you.
Related
I just updated to the current Alltel 6800 ROM. After setting up the phone and doing a hard reset, I noticed I have no data connection. I put in my#@alltel.com in the connection settings for the Alltel wireless connection. Tried *228 to update either the PRL or activate the phone, but get a message that programming could not be completed. I've tried to ##775 and ##778, but 000000 is not accepted when I'm asked for the unlock code. Any suggestions?
just got off the phone with Alltel
They had no idea what was going on. I spoke with their level one and two reps and they referred me to the insurance replacement number (glad I paid for that!). It's weird since I can make and receive calls on the phone.
**228 Not working
I upgraded to the new Alltel ROM and am having a problem when I dial **228 I can't do either option '2' or option '3'. I am able to receive and send calls and my data connection works fine, but I've got a flashing triangle on the today screen saying that I'm roaming. I talked to Alltel and they didn't give me any help. Does anyone know what I'm doing wrong?
Thanks,
Keir
Keir333 said:
I upgraded to the new Alltel ROM and am having a problem when I dial **228 I can't do either option '2' or option '3'. I am able to receive and send calls and my data connection works fine, but I've got a flashing triangle on the today screen saying that I'm roaming. I talked to Alltel and they didn't give me any help. Does anyone know what I'm doing wrong?
Thanks,
Keir
Click to expand...
Click to collapse
Are you performing **228, or *228? If so, that's your problem right there. You only need to dial with one "*".
Verify what's the PRL version in your phone. If you're area has EVDO it should be 40036, if not, it should be 30031.
Keir333 said:
I upgraded to the new Alltel ROM and am having a problem when I dial **228 I can't do either option '2' or option '3'. I am able to receive and send calls and my data connection works fine, but I've got a flashing triangle on the today screen saying that I'm roaming. I talked to Alltel and they didn't give me any help. Does anyone know what I'm doing wrong?
Thanks,
Keir
Click to expand...
Click to collapse
If you can't get it working from Gelial's instructions, you may also want to check the SID in EPST. After I upgraded and activated, it still didn't set my SID correctly for whatever reason so I was roaming all the time. You can manually go in and change it in EPST assuming you wrote it down beforehand.
kirzan said:
They had no idea what was going on. I spoke with their level one and two reps and they referred me to the insurance replacement number (glad I paid for that!). It's weird since I can make and receive calls on the phone.
Click to expand...
Click to collapse
Sounds like somethings not setup right in EPST but if you can't get in.... that's a whole other issue. I didn't have any problem with the upgrade changing my unlock code, I did see this in the past with the Sprint upgrades though. You may want to try GetSPC to see if the MSL code it generates for you works. It may be worth a shot...
How can I change my mms settings. when I open messages and the click settings then click connection settings it shows the settings but will not let me edit them can anyone help with this thank you
I belive there is a way to edit these settings via cdma workshop but i dont know too much about that
I cant get the phone to connect to the work shop
Does anybody know if they have rooted this phone yet I read the forum about it it does seem like they have yet
Root is a work in progress.
What are you messing with your settings for? if your having issues just run *288 and let it do it. if that doesnt work use the RUU Update, and then reprogram your phone and use *288
I cant I have the Eris running on Cricket I have the phone, internet, text and the market running great but would like to have mms
How did you get it running on cricket? Didnt you have to flash stuff for that work, if so please post me links asap. It will inevideably lead to root.
FireSokar said:
How did you get it running on cricket? Didnt you have to flash stuff for that work, if so please post me links asap. It will inevideably lead to root.
Click to expand...
Click to collapse
I'll take another order of that link as well.
Who wants to BET hes talking about the MOTO Droid...
FireSokar said:
Who wants to bed hes talking about the MOTO Droid...
Click to expand...
Click to collapse
Quit trying to correct me in every forum i post in.
FireSokar said:
Quit trying to correct me in every forum i post in.
Click to expand...
Click to collapse
Talking to me? If so, I meant that as I'm confused as to whether he did mean the Droid or not.
Nice ASSumption though.
Change PRL, network settings
dial ##778 then edit settings
so some body finde out how he did to make it work on criket?
wat about using APN Backup & Restore?
deseo said:
so some body finde out how he did to make it work on criket?
Click to expand...
Click to collapse
no, as above, edit security settings in epst
uhhh, yoo hooo! guys, the htc based android phones are dirt simple to program for use on another network..
I've had my eris running full on alltel over two months now with the unl. data plan. Never looses 3G, alltels 3G coverage is wicked sweet.
Getting Voice & SMS working:
Get current .PRL file for your network(alltel, sprint, vzw, cricket, etc..), google for it. Mount your phone thru USB, drag the PRL to the root of the SD card.
Unmount
Dial##PRL
Enter SPC code
Select PRL from SD
Restart Phone
Activate phone with your carrier, lie about what phone it is, i told alltel i'm a Samsung Delve, a phone they have.
They'll tell you to *228 it, this will work perfectly after you've programmed the PRL described above.
Hang up with them.
Getting data to work:
Dial ##PST send.
Enter SPC code
Go to security...
Google for those settings for your carrier and enter all that is asked for in that menu screen.
Do nothing else, restart the phone.
Now, setting up MMS on the Eris is a pain, I still can't get it.
When going to Messages, Settings, Connection settings, ... i am not allowed to edit those settings, they're stuck at vzw values.
IF .. and ONLY if I install the "quick settings" app in the market, disable mobile network, THEN go to messages, connection settings, .. i can now edit those values and change them to alltel's mms addresses... go home, them go back into messages, connection settings, all is saved, good. If I go and re-enable mobile network, ... the mms connection settings switch back to vzw... GAHH!!!
stevey500 said:
IF .. and ONLY if I install the "quick settings" app in the market, disable mobile network, THEN go to messages, connection settings, .. i can now edit those values and change them to alltel's mms addresses... go home, them go back into messages, connection settings, all is saved, good. If I go and re-enable mobile network, ... the mms connection settings switch back to vzw... GAHH!!!
Click to expand...
Click to collapse
It's probably just allowing you to input settings but unable to save them due to lack of permissions. Looks like MMS is screwed until root gets here :\
how do you get web working on crickets network ive change the settings from the security but still no luck.
Hi!
I have a Verizon Samsung Fascinate (SCH-i500) currently working with PagePlus Talk and Text. I bought it from somebody, so I'm a second owner. Mostly I use wi-fi, but sometimes I need to use data/mms. I went to a PagePlus dealer and asked about enable data/mms, he said I can't use it because PagePlus dose not allow data/mms on smartphone. I searched about solution more than a week, but I couldn't find it. Can you help me with your magic hands? I have QPST program. If you can, please give me a step by step instruction.
Thanks!!!
I just activated a Fascinate with Page Plus today, and I seem to be having the same issue with no data or mms working. Calls and text seems to be working fine though. I bought the phone off ebay, so it was previously used with Verizon service. I've searched for the past week on this as well, and I can't seem to find any instructions on what to do, and Page Plus CS is pretty useless. Any help would greatly be appreciated, thanks in advance!
I don't really know how to fix it but maybe I.have some information that can send you in the right direction.
First, there was a thread where people got the fascinate working on either US.cellular or cricket. That may help you get some information.
Second im pretty sure they had to use qpst to change the settings.
Third I think the problem had to do with the prl information in the phone.
Sent from my SCH-I500 using XDA Premium App
Hey thanks for your reply. I looked into people flashing to cricket and there isn't much information on that either. Plus I can't seem to find any apn settings or anything like that for Page Plus. I've prob spent another 6 hrs today on this with no luck. If anyone has any info about getting data and mms working it will be a huge help. Pretty much everything I find online are people asking what I'm asking with no responses.
For data, you require qpst build 215. Flash the correct ppp settings for your carrier. Any other build will yield you nothing. As far as mms, use apn back up to flash the correct settings.
Hey I really appreciate you giving me an idea with qpst. Unfortunately I'm still stuck at one part, so I'm hoping you might be able to clear that up for me. I downloaded qpst 2.7 build 215, I got my phone in dial up mode from **33284, set the COM port to 1, so I have the QPST service program recognizing my device, and I'm at the PPP Config tab. Only problem is I have no idea what values to enter for anything, I see 3 tabs "Rm", "Um", and "AN" and in each one there are spaces for values of "LCP", "IPCP", "IPCPv6". Then there are spaces for user id, password, tethered NAI, retries, timeout, primary dns, secondary dns, optimized dormant handoff, 1xEVDO->1x. So I really don't know where to begin. I've tried searching all over to see what I'm supposed to set if I want my phone working with Page Plus. Can't seem to find any clear answers. Anyways sorry for the long message. Hopefully you can clear some of this up for me. Again I really appreciate your help, thanks!
I just activated a fascinate on pp as well. Data works for me (haven't tried mms). Have you tried calling pp and verifying that data is enabled on the account? Also maybe an esn reset. The folks over at howard forums are pretty helpful too. Good luck!
Sent from my SCH-I500 using XDA App
Wow, sounds like you got lucky! I did call Page Plus to verify if data was enabled and it is. I guess I should call back and try the esn reset your suggesting. But as of right now I still don't have the data or mms working
rogerski1 said:
I just activated a fascinate on pp as well. Data works for me (haven't tried mms). Have you tried calling pp and verifying that data is enabled on the account? Also maybe an esn reset. The folks over at howard forums are pretty helpful too. Good luck!
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Also when you log into your Page Plus account is your phone listed as generic? Mine is listed as generic, and with Phone features as SMS and voicemail. No mention about data on the phone. Even though my plan has 100 mb of data. I do see 100 mb of data listed under the plan on the right though.
I'm getting a fascinate off ebay.
how to use it on pageplus?
$.99c activation service on ebay will activate the phone since it is Verizon phone?
or i have to use qpst?? software?
You guys think my data and mss might not be working due to the fact that I'm running a custom rom and 2.2.1? As opposed to the stock 2.1? I want to get some feedback, before I odin back to 2.1 to test it out, thanks.
I got exactly the same issue.
I know for a fact that the phone is not a problem, because it was working for last half a year with pageplus. I ported a phone number from google voice today and lo and behold, data not working anymore. I tried calling pageplus, they reset data service twice, didn't help. I also tried re-programming by calling numbers from here: http://pageplusdealer.com/PagePlus/catalog/ActivationInstructions.php . I tried reflashing firmware, kernel, and radio, and nothing. It isn't even trying to data connect.
Anyone knows what to do with QPST to try helping the issue?
*EDIT*: I figured it out. QPST showed wrong NAI. Somehow instead of [email protected], it was some completely bogus number with completely bogus domain name. Anyway, I reset it to correct value, and it works fine now. I have absolutely no idea why was it reprogrammed, and why *22890 didn't put it back.
Use (Page Plus Cellular) i have a Galaxy S Fascinate (Verizon) and data / mms work perfectly, I'm on $29.95 Plan 1200 min / 3000 text, 100 mb Data per month.
Does ANYONE have T-Mobile Vibrant with working MMS on Straight Talk? I've tried dozens of APN combinations, and to no avail. My 3g works, but MMS won't send, and won't receive. I've been trying for two weeks now. I take that back, I've been able to receive ONE mms message. One.
VFQuake said:
Does ANYONE have T-Mobile Vibrant with working MMS on Straight Talk? I've tried dozens of APN combinations, and to no avail. My 3g works, but MMS won't send, and won't receive. I've been trying for two weeks now. I take that back, I've been able to receive ONE mms message. One.
Click to expand...
Click to collapse
Make sure you have data enabled whenever you receive one.
Data has been enabled with every APN. I've also rebooted after I switch APNs, and then verified that they remained after the phone starts back up. Any form of troubleshooting regarding every basic setting has been attempted.
VFQuake said:
Data has been enabled with every APN. I've also rebooted after I switch APNs, and then verified that they remained after the phone starts back up. Any form of troubleshooting regarding every basic setting has been attempted.
Click to expand...
Click to collapse
In other words, nothing I've tried has worked. so basically short of another t-mobile vibrant user, using straight talk with working MMS, telling me their settings, I'm basically out of options.
reply to vibrant user
VFQuake said:
In other words, nothing I've tried has worked. so basically short of another t-mobile vibrant user, using straight talk with working MMS, telling me their settings, I'm basically out of options.
Click to expand...
Click to collapse
so i have just switched over to straight talk and i also have a samsung vibrant from tmo, on froyo. how did you get your data working? ive tried teakker, etc. and nothing has worked for me. i really dont want to root my phone but im thinking thats another option so that i can change the apn options somehow and use what the other straight talk tmo users are using (which is not what they give you on the activation card)
feel so helpless
I have been thinking of going to straight talk, couple questions
1. Do you have to request a tmo sim card from straight talk?
2. Do you need to be unlocked?
3. Do they charge activation?
I didn't mean to "hijack" ur thread but I figured you guys could answer this. Thanks
Sent from my SGH-T959 using xda premium
michelle1014 said:
so i have just switched over to straight talk and i also have a samsung vibrant from tmo, on froyo. how did you get your data working? ive tried teakker, etc. and nothing has worked for me. i really dont want to root my phone but im thinking thats another option so that i can change the apn options somehow and use what the other straight talk tmo users are using (which is not what they give you on the activation card)
feel so helpless
Click to expand...
Click to collapse
I just read something posted by a rep of straight talk that says the APN settings have to be updated and that there is instructions w the BYOP sim.
Sent from my SGH-T959 using xda premium
Okay so I just wanted to help out anyone else who wanted to get their DNA flashed to PagePlus since there are no (complete / dedicated) guides for this. Also, I figure I'd save a couple of people ~$20 - $50 to pay to have their phones flashed. I'm no expert at this, but I did get voice, sms and 3G (see below) data working. I know how to get MMS working (natively) but I am only familiar on how to do it with Cyanogenmod / CM-based ROMs (I'm on ViperDNA). So here we go. (Sorry for the lack of pictures, I'm just short on time right now.)
What you'll need:
Phone Information: Know your MIN, MDN and SID. You can get this information from PagePlus.
HTC Sync. You can get it here.
CDMA Workshop 2.7. Get the full version.
HTC Diag drivers (read through for this, download below).
PagePlus PRL files (download below).
A stock DNA, or at least one running a stock ROM like this. It's needed to access Diagnostic Mode.
An unactivated Verizon 4G LTE Micro SIM card (you can get one here for $5). This is critical.
Once you have all of this ready, you can get to flashing!
Make sure you have everything prepped. Get your PagePlus account setup and activated (phone number and plan). You won't be able to add your phone to your account specifically yet, but you will put the number in service. Also, make sure you've got the SIM card with you as well. DO NOT PUT THE SIM IN THE PHONE YET.
Install HTC Sync if you haven't already. This will install the HTC Drivers for you.
Connect your phone to your computer and let all the drivers install.
Once completed, go to the phone dialer and dial ##3424#. This will put the phone in diagnostic mode. Windows will then install the HTC DIAG and HTC DIAG 9k drivers. Windows found and installed the drivers for me, so they may work for you. If the installation fails, just follow the instructions to install the DIAG drivers here. (Note: The Device Manager won't say HTC USB Modem, it'll say HTC Diagnostic Interface (COMX) & HTC Diagnostic Interface - 9k (COMX).)
Once installed, enter ##3424# on your DNA's keypad again if necessary, go to the Device Manager and check if the two HTC Diagnostic ports are listed under LPT/COM Ports without the yellow triangle. If there's no error triangle you're good to go.
Take note of the COM port that the "HTC Diagnostic Interface - 9k" diagnostic interface is on. This is what we'll be writing to.
You just got past the first hurdle. Now it's time to start actually flashing the phone.
Open up CDMA Workshop. Hopefully you'd have had this downloaded by now.
Connect to the COM port that HTC Diagnostic Interface - 9k is on. Click connect. YOU CANNOT CONNECT TO THE REGULAR (NON-9k) HTC DIAGNOSTIC INTERFACE'S PORT. This is normal.
The status bar at the bottom of the window will say "Ready..." if you are connected. Click read. If everything on the left hand side of the window populates, you're good.
Now for these next parts, I'm going to give my own experience. I had issues with the phone not responding to the write commands (it appeared) so I'd always write everything multiple times just to be safe. I'd also have to enter the SPC unlock code numerous times throughout working on the phone. It was quite annoying. Settings stuck though, which was good.
Go to the Security tab. Look for the SPC section. Enter "000000" (without quotes) into the box above the Read and SPC buttons. Then click SPC > Send. you'll then get a message saying the phone has been unlocked.
Go to the Other tab. Look under RU-IM. Click the drop down box and select "NV-only".
In the same tab go to the PRL box. "NAM1" should be selected in the drop down box. Under it click the Write button and browse to the folder with the downloaded PagePlus PRLs. I recommend choosing to write "52711.prl" as that's the one that worked for me. Write the PRL to NAM1.
Click the drop down box and select NAM2. Write the same PRL to it as well.
Switch the the NAM tab. Click the Read button at the bottom of the box. The fields should populate with data.
Overwrite the MIN field with the info PagePlus gave you. Enter your phone number into Dir_Number (the field to the right of MIN). then go down to SID and replace that number with the SID PagePlus gave you. Write the data.
Click read to ensure the data was written. Go back to the Main tab and then go to Mode > Reset. Disconnect from CDMA Workshop and reboot your phone.
Once rebooted, connect the phone to your PC again and enter DIAG Mode (##3424#). Open up CDMA workshop and connect to the appropriate COM port. Read the data and ensure everything in the NAM tab is what you entered. If it is correct, you may disconnect end get out of DIAG Mode.
Alright, here's where it gets changed up. Wifi was not working for me on the stock ROM that I flashed, so I flashed my DNA to ViperDNA after these steps (which I recommend). If wifi is working for you, you can just continue then.
Open up the Play Store and search for LTE On/Off (for the HTC Thunderbolt). Install it.
Open it up, scroll down to the radio settings and select CDMA auto (PRL). The settings may not stick at first. Just keep applying it and turn the radio on and off. (When I would select it, it would change to CDMA + EvDo/LTE and I'd have to keep toggling it and selecting CDMA auto (PRL) until it stuck).
Enter airplane mode for a minute and then disable it. Wait a minute or two. If the signal bars show up without the roaming sign, you're good. Go to Settings > Mobile Data. You should see your data mode set to CDMA (on ViperDNA at least). DO NOT EDIT THIS.
Shut your phone off. Insert your SIM card. Turn your phone on.
Open up LTE On/Off and make sure that it's still set to CDMA auto (PRL). You should be getting text messages (to check, just use Google Voice and send a text to your number). Call *22890 or *22891. It may not work. Wait a bit though as it may start auto activating for you without needing to actually open the phone app or anything (this happened for me). It'll activate the phone with Verizon Prepaid (obviously not PagePlus) BUT THIS IS NORMAL. Let the phone finish activating.
Make a call and listen to the instructions. It'll say something about your activation PIN being defaulted to the last 4 digits of your number, and to press 1 for English texting or something. Just press one.
Congratulations, your phone is flashed. You should now have voice, sms and 3G working.
If 3G isn't working for you, kick your phone into airplane mode for a bit and then disable it. Also toggle Mobile Data on and off once or twice. Eventually (within 15 minutes) 3G will start working.
Extended Notes
If for some reason the "52711.prl" list results in a roaming signal, try flashing one of the other lists included in the download. Make sure you are writing to BOTH NAM1 and NAM2.
If the HTC Diag drivers don't work for you / are not recognized, install PdaNet and then get the diagnostic drivers from there.
I am not 100% sure if this will work, so if any CM/CM-based ROM users can confirm this that'd be great. I used this same method on my Rezound to get MMS working on PagePlus. Just do this: http://forum.xda-developers.com/showpost.php?p=41981275&postcount=172.
Can I ask those of you who have flashed their DNAs to PagePlus using this guide to please report back with 3G speeds (post a picture using the SpeedTest.net app)? Thanks! I just want to make sure 3G is working as best as it possibly can. So far speeds are pretty fast for me though.
TO GET MMS WORKING ON 8SMS: http://forum.xda-developers.com/showpost.php?p=50052065&postcount=24 (Give thanks to CapnChaos for the solution!)
TO GET MMS WORKING ON THE STOCK SMS APP (for ViperDNA): http://forum.xda-developers.com/showpost.php?p=51140821&postcount=30 (Give thanks to jeanr464 for the solution!)
Credits
I would never have figured out how to do this without the guide on flashing the Rezound to PagePlus from javamaan, Yura80, watt19, AsianCajun and the other guys in that thread. Also dhaval1's reply to a thread that I randomly came by also helped. And I'd also like to thank the guys from those threads and other places here on XDA who got these files onto the forums for use!
Also, HUGE thanks to CapnChaos and jeanr464 for solving the MMS problem!
It would probably be a good idea to omit
J D A said:
omitted.
Click to expand...
Click to collapse
from your tutorial.
.torrented said:
It would probably be a good idea to omit
from your tutorial.
Click to expand...
Click to collapse
Thanks for the advice. The Rezound tutorial also stated that so I didn't think it'd be a real issue. I updated the guide though. Hopefully some people will find it of use.
I have been trying to do this for the past 3 weeks! Wow, it's a damn shame I caved and paid someone to do it, you really broke it down to a science!
JDA, can you post screen shots from dfs of of the data and mobile ip tabs? Blank out any of your numbers or other personal information.
gpz1100 said:
JDA, can you post screen shots from dfs of of the data and mobile ip tabs? Blank out any of your numbers or other personal information.
Click to expand...
Click to collapse
I never used DFS for this but here are the screenshots from those tabs.
JDA, thanks for the posting. Seems a bit different than other profiles used, but also works.
Thanks JDA, a quick question does this mean we need the stock ROM only for flashing the prl, and after that we can move to any other rom as long as it support Verizon network?
Sent from my DLX using xda app-developers app
I am curious how similar the process is for flashing to Selectel? I have seen a few people around say that a phone setup to work on page plus should work without modification on selectel but I also understand page plus is prepaid and selectel is postpaid in terms of network access so I wonder about that a little.
Sorry for the late reply, hopefully you already did this though so I'll make an update for future users:
I was wrong. You only need a ROM with the stock phone app. I'm on ViperDNA and I found I can easily enter diag mode. I stated that because with past experiences on my Rez, diag mode could not be accessed through Cyanogenmod 10.1's dialer (so I had to revert to stock).
fordry said:
I am curious how similar the process is for flashing to Selectel? I have seen a few people around say that a phone setup to work on page plus should work without modification on selectel but I also understand page plus is prepaid and selectel is postpaid in terms of network access so I wonder about that a little.
Click to expand...
Click to collapse
No difference in flashing to either...........
Viper
MMS Problem
I used this guide to flash my HTC Droid DNA to PagePlus With 3G and Talk and Text. I cannot get MMS to work for some reason. Can someone help me.Thank you in advance.
Thanks In Advance.
Talk- Works
Text- Works
3G- Stable/2.42 MBPS Lowest Speed
MMS- Not Working
Thanks for the guide.
I can't get data working and I'm having trouble getting my sim to activate. The first time I tried, it tried to activate on its own like you said, but failed (I think because I accidentally had my old phone still on and I did an esn swap). I thought maybe I just ruined that sim so I bought another blank sim. But when I put it in it just said "Preparing sim card..." and didn't try to activate.
I'm new to 4g phones, so if anybody could give me any clues how to get data working I'd appreciate it.
Give it some time to auto activate
Sent from my HTC6435LVW using XDA Premium 4 mobile app
basito723 said:
Give it some time to auto activate
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
How long should it take? Do I need to re-run the initial phone setup to make it activate?
And to your question, did you try the 8sms application here with the PagePlus setttings? http://forum.xda-developers.com/showthread.php?p=41195590#post41195590
Yes I used 8sms and don't run the initial phone setup again
Sent from my HTC6435LVW using XDA Premium 4 mobile app
If that dosent work reflash it without the SIM in
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Thanks anyway
Sent from my HTC6435LVW using XDA Premium 4 mobile app
CapnChaos said:
How long should it take? Do I need to re-run the initial phone setup to make it activate?
And to your question, did you try the 8sms application here with the PagePlus setttings? http://forum.xda-developers.com/showthread.php?p=41195590#post41195590
Click to expand...
Click to collapse
I actually got 3g working without going through the activation process. I used DFS to match my settings to post #6 in this thread (replacing my phone number with the blurred out sections in the pics). I left the keys sections blank, but somehow my 3g still works. I thought the keys would be necessary and that I'd have to get them from a donor phone, but everything works without them.
How do you get MMS to work??
CapnChaos said:
I actually got 3g working without going through the activation process. I used DFS to match my settings to post #6 in this thread (replacing my phone number with the blurred out sections in the pics). I left the keys sections blank, but somehow my 3g still works. I thought the keys would be necessary and that I'd have to get them from a donor phone, but everything works without them.
Click to expand...
Click to collapse
I need help with MMS and how to edit APN-CONF.xml and where that file would be. When i send a MMS it states "invalid destination address"