Hello guys,
I got really big problem about my RAZR
Few days ago I flash Australia 4.0.4 ROM in my XT910 and then OTA to 4.1.2
It seems beautiful and smooth!
I delete CID before and fail to restore (I have backup)
Anyway I want to get rid of Bp tool power up so I install Bootmenu to skip it
Than I stock in motorola M!! It always boot in bootmenu!!
After many tries I gave up and use RSD to flash back, in this moment, battery low!!So I fail to flash it......
Now my device is dead until I plug AC adapter, but it just can't charge the battery!!
In AP flashmode -> fail to charge
I try to get in BP only mode to charge my battery but it always boot in Bootmenu!!
I can't charge my battery in ANY mode...because it always boot in Bootmenu!!
Please help me to get rid of Bootment or charge my battery~~~Thanks!!:crying:
chiayen said:
Hello guys,
I got really big problem about my RAZR
Few days ago I flash Australia 4.0.4 ROM in my XT910 and then OTA to 4.1.2
It seems beautiful and smooth!
I delete CID before and fail to restore (I have backup)
Anyway I want to get rid of Bp tool power up so I install Bootmenu to skip it
Than I stock in motorola M!! It always boot in bootmenu!!
After many tries I gave up and use RSD to flash back, in this moment, battery low!!So I fail to flash it......
Now my device is dead until I plug AC adapter, but it just can't charge the battery!!
In AP flashmode -> fail to charge
I try to get in BP only mode to charge my battery but it always boot in Bootmenu!!
I can't charge my battery in ANY mode...because it always boot in Bootmenu!!
Please help me to get rid of Bootment or charge my battery~~~Thanks!!:crying:
Click to expand...
Click to collapse
this happened to me today, I used it to solve:
http://forum.xda-developers.com/showthread.php?t=2194825
But I had battery, you no, this is the big problem ;/ the only solution that I see is buy a new battery with charge, open the phone and change them.
Thanks dud. Finally I returned my RAZR back to repair station...:crying:
Okay so awhile back I rooted my XT912 and had safestrap 3.11 installed. I do not recall if I had clockwork mod or not.I had Eclipse ICS installed and was happy with it. At one point I was once again meddling where I shouldn't and wiped my stock rom slot via safestrap. I just booted into the Eclipse on rom slot 1 and forgot about it. I decided to try a cyanogen rom and had it downloaded to my external sd. I went into safestrap and began deleting rom slot 1. Everything was fine until, MY BATTERY DIED... After some more work I had eventually ended up being able to use recovery and flash the internal drive so I could use RSD to boot into a stock bootloader. I keep getting errors there. I do have a backup on my computer. I just really don't know where to go from here as I cant even access safestrap anymore. Please help. I have no idea where to go from here and couldn't find anyone with the same issue and believe me I have spent the better part of two days looking.
Try using this: http://www.droidrzr.com/index.php/t...-verizon-droid-razr-and-droid-razr-maxx-only/
Remember to have a full battery though, or you might hard-brick,
how do i charge? when its plugged in via usb it has a white led and with the wall charger, it stays on the dual core screen for a while or just goes black
Go into fastboot mode does it say? Battery OK? If it does go on and try the Utility.
AP Fastboot Flash Mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode- first press power key to power down
Device is LOCKED. Status Code: 0
Battery Low
Cannot Program
(USB)
Transfer Mode:
USB Connected
(WHEN PLUGED INTO WALL)
Connect USB
Data Cable
You need a factory programming cable(eBay... Hong Kong clone works fine) or a USB factory adapter(team blackhat, Google them). Your phone is bricked and no matter what you do you won't be able to charge it. Once you get the cable or adapter then you'll be able to connect you phone to the computer with it and boot into fastboot mode it will say battery is fine to program because the cable/adapter powers the phone, doesn't charge it. All you have to do from there is use rsd lite and flash the fast boot files. Your phone will be back to stock and you can re-root and install safestrap again.
Good luck
Krooked All Day...
Try to get into the boot loader and select BP Tools and plug in the charger into the wall and see if it charges.
http://forum.xda-developers.com/showthread.php?t=1842053
http://forum.xda-developers.com/showthread.php?t=1842053
hi
so the story is - i have motorola xt910 (MAXX hd) from europe
i have installed bootmenu manager and safestrap 3.72
firstly the stock rom didnt work anymore,safestrap was disabled,but i have installed CW11 on slot 1 and everything was fine,until battery died
Now i cant turn on it, when i plug razr to wall charger its turn on by itself and stuck on M logo
when i plug to usb cable,sometimes the same - stuck on M logo on led is active - the strange thing that i dont turn it on but the logo is appearing
but i cant turn it on
i have tried VOLUME DOWN+VOLUME UP+POWER
nothing..
please help
talboris said:
hi
so the story is - i have motorola xt910 (MAXX hd) from europe
i have installed bootmenu manager and safestrap 3.72
firstly the stock rom didnt work anymore,safestrap was disabled,but i have installed CW11 on slot 1 and everything was fine,until battery died
Now i cant turn on it, when i plug razr to wall charger its turn on by itself and stuck on M logo
when i plug to usb cable,sometimes the same - stuck on M logo on led is active - the strange thing that i dont turn it on but the logo is appearing
but i cant turn it on
i have tried VOLUME DOWN+VOLUME UP+POWER
nothing..
please help
Click to expand...
Click to collapse
The led color,is it white?
If it is,then you must make or buy the factory cable and flash your stock rom with RSD Lite.
Sent from my Razr XT910
yes,its white
now i have managed somehow to turn it on
but the problem is that stock ROM in safestrap is always Disabled ,i cant use it ?
so i can use it only with factory cable? whats so special in it ?
do i have to use only original stock rom ? shouldnt safestrap to bypass it ?
talboris said:
yes,its white
now i have managed somehow to turn it on
but the problem is that stock ROM in safestrap is always Disabled ,i cant use it ?
so i can use it only with factory cable? whats so special in it ?
do i have to use only original stock rom ? shouldnt safestrap to bypass it ?
Click to expand...
Click to collapse
If you can turn it on then your battery is ok,just flash your stock rom with RSD Lite,root it,install Safestrap and happy flashing.
The factory cable allows you to flash the fastboot (stock rom) files when your battery is too low.
Did you try to get in to fastboot mode?
Pressing vol- vol+ and power button at the same time?
Look what's written for the battery,Battery OK-good,Battery Low-you need the factory cable.
Sent from my Razr XT910
welder73 said:
If you can turn it on then your battery is ok,just flash your stock rom with RSD Lite,root it,install Safestrap and happy flashing.
The factory cable allows you to flash the fastboot (stock rom) files when your battery is too low.
Did you try to get in to fastboot mode?
Pressing vol- vol+ and power button at the same time?
Look what's written for the battery,Battery OK-good,Battery Low-you need the factory cable.
Sent from my Razr XT910
Click to expand...
Click to collapse
i turned it on,everything was ok,plugged and unplugged cables several times,then once again when battery died
when i connect to a laptop - the led is whight
when i connect to wall charger - i have M logo and then battery with question mark
what does it mean ?
talboris said:
i turned it on,everything was ok,plugged and unplugged cables several times,then once again when battery died
when i connect to a laptop - the led is whight
when i connect to wall charger - i have M logo and then battery with question mark
what does it mean ?
Click to expand...
Click to collapse
first. installing safestrap and boot menu manager at same time is not recommended.
second. if I understood you, you flashed cm11 over stock ROM. but you provide no info about how you did it.My guess is you didn't wipe all recommend partitions.
that leads me to third, your battery stats probably were messed up. next time you charge it try to wipe your battery stats, there is apps in play store that will do it for you. some people say it doesn't does a difference, certainly your battery will not magically improve, but it does corrects weird behaviors.
If it doesn't works, try using RSD as welder73 told you. troubleshooting is easier in a clean and working system. what I am proposing is worthy to try if you have data that you cannot loose.
note: don't know how factory cable works, but I hope you are using it instead of directly connecting cable to the battery. cause charge might not be controlled if you charge directly to battery terminals... if you let it charge too much time it can damage battery.
xt910 can be a RAZR MAXX but not a MAXX HD which is a totally different phone.
angrist said:
first. installing safestrap and boot menu manager at same time is not recommended.
second. if I understood you, you flashed cm11 over stock ROM. but you provide no info about how you did it.My guess is you didn't wipe all recommend partitions.
that leads me to third, your battery stats probably were messed up. next time you charge it try to wipe your battery stats, there is apps in play store that will do it for you. some people say it doesn't does a difference, certainly your battery will not magically improve, but it does corrects weird behaviors.
If it doesn't works, try using RSD as welder73 told you. troubleshooting is easier in a clean and working system. what I am proposing is worthy to try if you have data that you cannot loose.
note: don't know how factory cable works, but I hope you are using it instead of directly connecting cable to the battery. cause charge might not be controlled if you charge directly to battery terminals... if you let it charge too much time it can damage battery.
xt910 can be a RAZR MAXX but not a MAXX HD which is a totally different phone.
Click to expand...
Click to collapse
tnx for anwering
whai i did :
1)installed bootmenu manager
2)installed safestrap
after that STOCK ROM stopped to work - i didnt perform any wipe
3)i have installed CW11 on slot 1
problems started when battery dies
4)somehow i have managed to turn it on and installed Slimbin on STOCKROM
now i have this question mark - cant turn it on and cant use RSD since battery is LOW, i have tried RSD before it said "fail" Razr refused or something..
so my question for the next time
shouldnt i install bootmenu prior to safestrap ?
what wipe should i do ?
how do i wipe partitions ?
talboris said:
tnx for anwering
whai i did :
1)installed bootmenu manager
2)installed safestrap
after that STOCK ROM stopped to work - i didnt perform any wipe
3)i have installed CW11 on slot 1
problems started when battery dies
4)somehow i have managed to turn it on and installed Slimbin on STOCKROM
now i have this question mark - cant turn it on and cant use RSD since battery is LOW, i have tried RSD before it said "fail" Razr refused or something..
so my question for the next time
shouldnt i install bootmenu prior to safestrap ?
what wipe should i do ?
how do i wipe partitions ?
Click to expand...
Click to collapse
ok. when you get into fastboot and try to RSD and get a Low Battery warning, the is no other way left... charge battery. or get a factory cable, there is a thread explaining how to build one.
first question. you have to choose one of them. for newbies, safestrap cause all new ROMs are prepared to work with that program. if later, u decide to test bout menu manager, you will have to uninstall safestrap ( of course you will not be able to use any ROM installed with safestrap). since boot menu manager is no longer supported, you will need to mod ROM zip file prior to flashing that's why i recommend sticking to safestrap for now. Don't install both, they are not meant to work together.
second question. To install in stock ROM, you have to wipe everything except sdcard and sd-ext where you personal data is (never tried, so can't help you more). for slot1 Wiping is not necessary first time, cause slot1 is fresh. next time yo install other ROM you will have to wipe data, cache and system. double check what you ate doing, so you don't wipe stock instead of slot1.
Wipe options are in safestrap.
SafeStrap and Boot Manager
I have accidently installed both apps on my Motorola Razr XT910 and my phone is now stuck on the red logo - I cannot get it into the bootloader to unbrick it with RSD Lite. Is there anybody who can advise ?
ok,i somehow managed to turn it on
now i want to flash 4.0.4
the phone itself form Norway,what ROM should i use? i tried to install Asian but it didnt work "some file not singed"
i just downlod zip file,unzip it, and choose xml file in RSD lite?
talboris said:
ok,i somehow managed to turn it on
now i want to flash 4.0.4
the phone itself form Norway,what ROM should i use? i tried to install Asian but it didnt work "some file not singed"
i just downlod zip file,unzip it, and choose xml file in RSD lite?
Click to expand...
Click to collapse
Yes,but flash the Europian fastboot file.
And don't try to flash ICS if your stock was JB.
You can flash JB fastboot file with RSD Lite if you want,that way you'll upgrade to JB.
About RSD Lite,I unzip file with it,if I remember correctly,click on start,choose decompress only and find your zip.
Sent from my Razr XT910
Okay.. I have a similar problem which I have ran into now..Yesterday I was just using my phone normally and was trying to call someone, when the phone immediately shut down..my guess was that the battery stats were screwed up..So I tried charging it and even I had the question mark on the battery when I connected it to the charger. I couldn't switch on the phone manually. I was on PA android jellybean 4.3.1. So should I also need a factory cable or something to restore my phone??
Thanks in advance
Hello everyone,
I've have CM11 had been installed over 4.0.1 via SafeStrap to ROM slot 1. I wanted to clean stock rom and wiped it all. After phone stays on Moto logo...
I've read and prepared RSDLite and drivers to flash my failed xt910 but I can't because low battery level.
How could I charge battery/flash ROM while phone in this state?
sad1002 said:
Hello everyone,
I've have CM11 had been installed over 4.0.1 via SafeStrap to ROM slot 1. I wanted to clean stock rom and wiped it all. After phone stays on Moto logo...
I've read and prepared RSDLite and drivers to flash my failed xt910 but I can't because low battery level.
How could I charge battery/flash ROM while phone in this state?
Click to expand...
Click to collapse
Can you shut your phone down and just keep it plugged into the wall?
Im trying to help also. Not just quoting the obvious to get you upset.
If you press the VOLUME UP and DOWN and POWER keys at the same time it should shut your phone down. Then plug it in for an hour. Should charge your phone up. And if you have your phone plugged into your stock wall adapter and cable it will charge in SafeStrap.
Hi,
If the first suggestion didn't work you could buy a Motorola factory cable and threes is a link for it in eBay http://m.ebay.com/itm/360632413144?nav=SEARCH ,
Or you could make one by yourself using this video https://www.google.com.sa/url?sa=t...seJ6y7yW3I6rdGm3g&sig2=fVLZTy4HBHtqumXyFrLKHg
factory cable works for phone but trying to load ROM to phone was failed without begining
In service we tried one more time - nothing work. Service man loaded ROM via test-points on motherboard. Now I have 4.1.2 European, nice works. Thank you guys.
Congratulation!
If you like you you could hit thank you button.
Hi, Im new XDA and I signed-up mainly for the purpose of finding the solution to this very annoying bug on my Motorola Droid RAZR XT912. I've looked all over the web to find a solution but, just couldn't find one particular to my problem. So here it is. After trying to install Liquidsmooth V4.0 Nightly, it failed twice. I then rebooted the phone but it wouldn't boot back into CM11. I was then stuck in a boot loop. It would show the motorola sign then show the red triangle over the android and over again. I've tried using the rsd lite tool and the razr utility but cant continue because of low battery and i cannot charge the phone. When I put phone on charger, it shows the moto symbol then turns black. it then reboots and shows the red triangle over the android and does the process over and over again. How can i fix this problem?
joseph.walker.samuel said:
Hi, Im new XDA and I signed-up mainly for the purpose of finding the solution to this very annoying bug on my Motorola Droid RAZR XT912. I've looked all over the web to find a solution but, just couldn't find one particular to my problem. So here it is. After trying to install Liquidsmooth V4.0 Nightly, it failed twice. I then rebooted the phone but it wouldn't boot back into CM11. I was then stuck in a boot loop. It would show the motorola sign then show the red triangle over the android and over again. I've tried using the rsd lite tool and the razr utility but cant continue because of low battery and i cannot charge the phone. When I put phone on charger, it shows the moto symbol then turns black. it then reboots and shows the red triangle over the android and does the process over and over again. How can i fix this problem?
Click to expand...
Click to collapse
When you see that red triangle,press vol+ and vol- buttons at the same time and then you choose "factory reset" option.
Sent from my Razr XT910
127
welder73 said:
When you see that red triangle,press vol+ and vol- buttons at the same time and then you choose "factory reset" option.
Sent from my Razr XT910
Click to expand...
Click to collapse
The factory reset went through successfully , but after a restart it just continues the bootlop.
In AP Fastboot. When it's connected to the wall charger, it says battery ok.
But when i connect to a usb cable it says battery too low, can not program.
Somehow I need to bypass the battery low problem.
Nothing can be transferred to my phone in this state.
Or is it a way to flash a zip in stock recovery?
Please HELP!!
joseph.walker.samuel said:
The factory reset went through successfully , but after a restart it just continues the bootlop.
In AP Fastboot. When it's connected to the wall charger, it says battery ok.
But when i connect to a usb cable it says battery too low, can not program.
Somehow I need to bypass the battery low problem.
Nothing can be transferred to my phone in this state.
Or is it a way to flash a zip in stock recovery?
Please HELP!!
Click to expand...
Click to collapse
Put the phone on the charger and charge it for a couple of hours or over night,some people reported that they was able to flash the rom after that.
Or buy the factory cable,it allows you to flash the fastboot file,without battery low warning.It's only for flashing,not for charging.
Actually,you can make one by yourself,it's easy,here's the picture what you have to do
Sent from my Razr XT910