[Q] T-mobile P769BKGO u-boot - LG Optimus L9 P760, P765, P768, P769

Hi first post here. I have messed up the T-mobile LG Optimus L9 (P769BKGO) during the JB update, and the u-boot and x-recovery files are messed up. I fastboot the attachment from another thread:
http://forum.xda-developers.com/showpost.php?p=40121966&postcount=7
and it still have a touch screen problem (screen alignment not correct, and off by quite a bit).
I tried to flash to the P769BK (not prepaid - 10G) and Canada Wind (11G), and it does not resolve the touch screen issue.
I read another thread that the files are actually in /dev/block/mmcblk0p1 and p2. I tried to borrow another rooted phone and use root explorer to locate the files, but cannot.
Can someone post the 2 files here? Or direct me how to copy the files out using adb in PC or root explorer on the phone.
I read another thread to have the V6.BIN in the touch screen, and it does not help me now since my screen is way off, and almost cannot use the keyboard. My best bet is to use fastboot to upload these 2 files to the phone.
Many thanks.

vrance said:
Hi first post here. I have messed up the T-mobile LG Optimus L9 (P769BKGO) during the JB update, and the u-boot and x-recovery files are messed up. I fastboot the attachment from another thread:
http://forum.xda-developers.com/showpost.php?p=40121966&postcount=7
and it still have a touch screen problem (screen alignment not correct, and off by quite a bit).
I tried to flash to the P769BK (not prepaid - 10G) and Canada Wind (11G), and it does not resolve the touch screen issue.
I read another thread that the files are actually in /dev/block/mmcblk0p1 and p2. I tried to borrow another rooted phone and use root explorer to locate the files, but cannot.
Can someone post the 2 files here? Or direct me how to copy the files out using adb in PC or root explorer on the phone.
I read another thread to have the V6.BIN in the touch screen, and it does not help me now since my screen is way off, and almost cannot use the keyboard. My best bet is to use fastboot to upload these 2 files to the phone.
Many thanks.
Click to expand...
Click to collapse
If you are rooted, do first and last and if not rooted do all http://forum.xda-developers.com/showpost.php?p=40121966&postcount=7

Confirmed working after rooting and following this thread for the touch screen fix.
http://forum.xda-developers.com/showthread.php?t=2182867&page=3
It will be easier to locate the touch screen by following this thread on the touch screen data.
http://forum.xda-developers.com/showthread.php?t=2198114
Thanks for your guidance.

Related

[Q] LG Enlighten (Verizon Wireless) Root

I have an LG Enlighten (Verizon Wireless), not an LG Optimus Slider (Virgin Mobile), running Android 2.3.4 (Gingerbread). I am in desperate need of a root solution. I have searched the online forums to no avail. I have put the phone up for sale for fear that this device may never be rooted. I am calling on XDA Developers to produce a working root before I ultimately rid myself of this thing. To add, I tried running Android SDK (adb). No go. The instructions threw me even after trying them repeatedly on several different occasions. It could be that my laptop
has no internet access, but I'm not entirely sure.
I really enjoy this phone and have customized it to the point of
exhaustion. All I'm waiting for now is ROOT! Please help ASAP...
Have you attempted to root it? Have you tried Superoneclick, z4root, and/or Gingerbreak?
Re: Have you tried to root it?
Yes, I have. Unfortunately, with no success. Results are as follows:
Z4Root - The end result is my phone takes me back to the previous screen (internet, home, games, music, etc.). It begins the rooting process... acquiring shell root. Then it just sticks for approximately 30 seconds and then closes. I have repeated the process on several occasions in the event that something unusual happened the first time around. But the result is always the same.
Gingerbreak - This app just ultimately hangs, endlessly. Approximately two hours worth before I just quit in frustration. But all online forums claim it should take no more than 15 minutes tops. I should also note that I read Z4Root and Gingerbreak will not work on rooting Android 2.3.4 due to the patching of an exploit. However, I did not update my phone to this firmware. It came preinstalled. And I have not found a procedure for downgrading (sbf'ing) an LG Enlighten.
SuperOneClick - This is the one I'm currently trying still. I can't recall the website, but in addition to SOC, it also requires the use of adb from Android SDK. The problem I'm coming across is the laptop I'm using to perform this action is without internet access (which I've tried feverishly to restore to no avail). And I'm thinking this is what the issue may be, but I'm not entirely sure. The only access I have to the internet currently is on my phone. However, I make a weekly trip to the college library (no restrictions on installing, downloading, etc.). So maybe I can try something there.
For the past month, I've been doing extensive research online trying to find any and all information in regards to resolving this matter. A few sites have blamed Verizon for crippling their Android devices from performing certain functions. For instance, this particular device has no "boot into recovery mode" (which I confirmed with a Verizon tech support person). Had it, I easily could've updated with the .zip file from my SD card (which I've now deleted since it's rendered useless).
I did read today that the next version of SuperOneClick v2.3 (to come out at a later date) will include the option for the forced inclusion of adb debugging/android files which could be the solution to my problems. Possibly.
I apologize if this reply post seems a little long-winded. But I wanted to provide you with all the information I have available in order to better recieve instruction as how to proceed forward. I will continue to try the SuperOneClick in hopes that I will acquire root. But if not, I will rely on the expertise of those in the XDA community.
Thanks,
Centim6
Rooting LG Enlighten
Ok. I found the solution. There is a video on youtube which shows you how to do it. And it works. I now have a rooted device! Finally. Thank you for your assistance.
centim said:
Ok. I found the solution. There is a video on youtube which shows you how to do it. And it works. I now have a rooted device! Finally. Thank you for your assistance.
Click to expand...
Click to collapse
Hi, I too have an LG Enlighten from Verizon wireless. I was just wondering how your root process went? Did the phone work well afterwards? Also do you by any chance have a link to or at least remember the name of the video you watched which helped you to get your phone rooted.
thanks in advance, Angel
centim said:
Ok. I found the solution. There is a video on youtube which shows you how to do it. And it works. I now have a rooted device! Finally. Thank you for your assistance.
Click to expand...
Click to collapse
Can you link to the video?
Sparky42 said:
Can you link to the video?
Click to expand...
Click to collapse
seeing as there is no link, I would say no.
secondly, the video posted and my own research indicates that root was possible only if it was v. 2.3.3. There isn't anything available for 2.3.4.
I have rooted my LG Enlighten which was on Gingerbread 2.3.4. I made a tutorial over at phandroids forums since xda does not let me post links to outside sources. Just google Lg Enlighten root and you will find it in the first or second link. Enjoy.
PS: If you do not believe me I made a video of my phone rooted on youtube. My user name there is the same as xda and I posted pictures at the end of my tutorial. Gingerbread 2.3.4 is fully exploitable on the LG Enlighten.
fsdfgasgfisd said:
I have rooted my LG Enlighten which was on Gingerbread 2.3.4. I made a tutorial over at phandroids forums since xda does not let me post links to outside sources. Just google Lg Enlighten root and you will find it in the first or second link. Enjoy.
PS: If you do not believe me I made a video of my phone rooted on youtube. My user name there is the same as xda and I posted pictures at the end of my tutorial. Gingerbread 2.3.4 is fully exploitable on the LG Enlighten.
Click to expand...
Click to collapse
I think it would a great idea to include which firmware you used this on. I kbow for a fact that it fails on v4 and v5.
And its not that I don't believe you (I do btw) its just the lack of specifics are going to excite someone and they'll leave you a nasty message cause they thought it would work. So, just a heads up:
Android version:
Firmware version:
Sent from my LG-VS700 using xda premium
I can confirm that the new VS700ZV5 update crippled the ability of this phone to root. I just tried the gingebreak and it didnt work. Any way around this?
Same here, android 2.3.4; firmware VS700ZV5.
I haven't been able to get root to work with SoC....
Any chance someone will figure a way around this update?
please reply to root on you tube PLEASE!
centim said:
Ok. I found the solution. There is a video on youtube which shows you how to do it. And it works. I now have a rooted device! Finally. Thank you for your assistance.
Click to expand...
Click to collapse
Extremely frustrated and hoping you will share this link. I to have tried everything to root my Enlighten to no avail and would appreciate your help more than I can explain! Please! Thank you and congats!
I had my phone rooted, then verizon put out an update, and now I can't root it. I think we're screwed until sombody figures out a new method.
Model: LGVS700
Firmware: VS700ZV5
im not sure if this will help but here, i found this claiming to be able to root the phone.
First, you need the file hboot_2.xx_soff-V8.9.zip, download it.
Unzip it into c:evoroot on your pc.
Second, put your LG Enlighten into development mode by
going to Settings->Applications->Development and turn USB
debugging on.
Third, connect your LG Enlighten to your computer and set
your USB to Just charge.
Fourth, if you get errors with drivers, install their HTC drivers.
(You can also install HTC Sync, but it is bulky!)
Fifth, open up a command prompt by typing cmd.
Sixth, type the following commands: (Or copy and paste,
easier!)
Code:
cd evoroot
adb push root/unrevoked-forever.zip /sdcard/
adb push root/mtd-eng.img /sdcard/
adb push pc36img/PC36IMG-ENG.zip /sdcard/PC36IMG.zip
adb push pc36img/PC36IMG-MR.zip /sdcard/PC36IMG-MR.zip
adb push root/flash_image /data/local/
adb -d install -r root/z4root.apk
Seventh, go to your phone and launch Z4Root app. Then select
temp root and wait until its done.
Eighth,go back to command prompt and type:
Code:
adb shell
su
If you get a pound(#) sign, that means you have temp root,
which just gives you temporary root so we can now install
permanent root.
ninth, go back to command prompt and type the following:
Code:
chmod 0755 /data/local/flash_image
./data/local/flash_image misc /sdcard/mtd-eng.img
sync
And reboot to bootloader mode by typing:
Code:
reboot bootloader
When bootloader mode starts up, it will look for PC36IMG.zip
and after about 3 minutes ask you if you want to install
PC36IMG.zip.
Say Yes by hitting the volume up button, it should now install
the new zip file, should take about 10 minutes. Go grabs some
coffee and come back.
Eleventh, reboot when its done by hitting the volume up
button.
It will reboot into the OS and we dont want that so takes the
battery out and puts it back in it. Then go back to the
bootloader by hitting the power button while holding down
the volume down button.
Choose Bootloader and wait until you get the triangle sign and
type:
Code:
adb push recovery /
adb shell busybox Cinstall /sbin
adb shell nohup /sbin/recovery
&
Go back to your LG Enlighten and you should see green
menus.
Choose install zip from sd card and choose unrevoked-
forever.zip
After that installs, Choose MS-USB
Go to your computer and delete PC36IMG.zip, then rename
PC36IMG-MR.zip to PC36IMG.zip.
Then power off your LG Enlighten, power back on by pressing
Power Button while holding down the Volume Down button,
this should get you back into bootloader mode.
Simply wait and when it asks to install the update, hit the
Volume Up button.
then reboot your LG Enlighten, your device should now be
rooted with Recovery menu then you can flash new ROMs for
LG Enlighten.
LG Enlighten root
I have lg enlighten running 2.3.4 and it is rooted with super user and rom toolbox working. I used POOT.APK which can be found on google. It worked well and everything went smooth. It is a simple and easy to use application. (You can use either SU or SSU)
any way to update it to ics? i have one

[q] i think it's bricked,,, opv.

Just wondering if there's any youtube videos on HOW TO UNBRICK LG OPTIMUS V. I'm seeing all these threads on how to do this and that but would be nice to see a video on how to unbrick it.
I have a LG Optimus V and it was rooted and had a rom on it and now it boots up with the virgin mobile splash screen then the little virgin mobile screen then to the silver LG LOGO and goes black. Can someone please direct me to a video or something more user friendly on how to unbrick it..
Cruzzer26 said:
Just wondering if there's any youtube videos on HOW TO UNBRICK LG OPTIMUS V. I'm seeing all these threads on how to do this and that but would be nice to see a video on how to unbrick it.
I have a LG Optimus V and it was rooted and had a rom on it and now it boots up with the virgin mobile splash screen then the little virgin mobile screen then to the silver LG LOGO and goes black. Can someone please direct me to a video or something more user friendly on how to unbrick it..
Click to expand...
Click to collapse
It's not so hard to unbrick your phone back if you past first logo..first plug your phone to pc, start cmd (command line) and type adb logcat (of course if you have properly installed Android SDK), after that you should see 'loop' errors..then find on this site KDZ and original firmware downloader..get your original ROM and flash it using KDZ..if u want to root again then use SuperOneClick (only the newest version!)...
Ask when you don't know somethink..
mastershefis said:
It's not so hard to unbrick your phone back if you past first logo..first plug your phone to pc, start cmd (command line) and type adb logcat (of course if you have properly installed Android SDK), after that you should see 'loop' errors..then find on this site KDZ and original firmware downloader..get your original ROM and flash it using KDZ..if u want to root again then use SuperOneClick (only the newest version!)...
Ask when you don't know somethink..
Click to expand...
Click to collapse
Thanks I'll try that and let you know...

[Q] Bricked plz help!!!!

Hello forums this is my first post,
I recently purchased a TF 201 used off the internet with ics so i decided to unlock it and root it then my bf tried to help me installed a custom mod and do to (lack of reading) the tablet flashed and is now stuck on the Asus splash screen and the only text is located in the corner saying the device is unlocked. We cannot access fast boot (any buttons at start result in the same result as just pressing the power button) boot we can only access apx mode and we do have NV flash but we don't have a blob file to use. He has the same model would it be possible to copy some files from his (I have access to windows and Linux)
Thank you for reading and i really hope this is fixable i only had this thing 4 days and its already not working i would really appreciate any help [/I
supercuteangel said:
Hello forums this is my first post,
I recently purchased a TF 201 used off the internet with ics so i decided to unlock it and root it then my bf tried to help me installed a custom mod and do to (lack of reading) the tablet flashed and is now stuck on the Asus splash screen and the only text is located in the corner saying the device is unlocked. We cannot access fast boot (any buttons at start result in the same result as just pressing the power button) boot we can only access apx mode and we do have NV flash but we don't have a blob file to use. He has the same model would it be possible to copy some files from his (I have access to windows and Linux)
Thank you for reading and i really hope this is fixable i only had this thing 4 days and its already not working i would really appreciate any help [/I
Click to expand...
Click to collapse
You cannot use blob files from someone elses machine unfortunately.
Nvflash is useless to you without your own backups that could only be made while you was on ICS and working.
ok so then what
flumpster said:
You cannot use blob files from someone elses machine unfortunately.
Nvflash is useless to you without your own backups that could only be made while you was on ICS and working.
Click to expand...
Click to collapse
So then what are my options? Is there something soldered to the main board like a bios chip or something I can replace or do I have to completely replace the motherboard? Are there any other utilities that I may be able to use ?

LG L9 (769 Model) Black Screen Bricked (I've read a lot!)

Hey all,
So I successfully rooted my phone, and then I was going to go into recovery reboot mode to install a downloaded rom. I'm not sure what did it, but on that restart I got LG Security error. I first attempted on three different computers to do LG Mobile Support Tool. It stopped everytime when it was going to begin downloading the files. I'm pretty sure if I still had the Security Error image, I would be fine, because I now know of ways to bypass the LG Support Tool, and edit the host file, and then get it downloading.
Either way, in my research after no success with LG Mobile Support Tool, I came across Fastboot. So I got fastboot, I got the drivers installed, but I'm pretty sure my problem was, on the command prompt screen when Fastboot asks' you questions I said yes on them. I believe this is what caused my phone to have the black screen. It will not go into S/W upgrade mode now. It will not do anything, just black screen. I found a tutorial over on Android Forums, and with using Fastboot, I was able to sucessfully flash "p4_769.img" According to that tutorial, after doing that I should have a dead android guy logo, and then just be able to hard reset... but that didn't change anything. Still have the black screen. Still won't go into S/W Upgrade mode.
Now according to what I've read, the next step would be to flash KDZ Afresh...I've looked for this, whatever it is, specific to my model phone, but I can't find anything. If anyone else has any ideas, I would love to hear. I'm so frustrated at this point. Very much appreciate any help. Thank you.
It sounds like now what I have to do is, using how I flashed that recovery img, I first should flash the x and uboot.bin files to my phone. Then I will be able to get into S/W mode, and then restore from there. I just have to find these bin files. I don't have a friend or anyone nearby with the same phone as mine that can:
adb shell su -c busybox dd if=/dev/block/mmcblk0p2 of=/sdcard/external_sd/p2.bin
with theres.
Hi dlipford370, you could try this http://forum.xda-developers.com/showthread.php?p=51206080
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted

How to unlock Alcatel Ideal 4060A Bootloader?

Hi,
I'm brand new to this forum and my name is Jessy, and it's my pleasure to be here!
I recently bought this AT&T GoPhone (for around $29) at Walmart, and I was following this guide to allow me to use my SD Card as an internal memory storage unit for my phone, but I found out that I need to unlock the Bootloader, install TWRP, SuperSU and Link2SD apps to the SD card and my phone. Since this smart phone is similar to the Idol 3, could I use this method to unlock the Bootloader for my phone or do I have to try a different approach?
I appreciate your time and I look forward to contribute further to these forums! Thanks again!
-Jessy
I picked one up on Black Friday, and decided to root it. I was only able to install an older version of SuperSU though (v2.46). First I had to install the PC version of KingRoot (It's in Chinese I believe, but middle button is always "next" or "yes"), root the phone, and then replace KingRoot with SuperSU. Took me a few tries.
This is the guide I used from the forum:
SuperSU Me_6.4.apk
KingRootSetup v3.2.0.1129.exe
1. install kingrootsetup on pc(must have internet connection to work)
2. connect ur phone with ADB enabled from developers option
3. root ur phone by following on screen instructions...
4. after rooting,install supersume on phone
5.open the app,click on big blue button and wait...
done,replaced kingroot with supersu..
-Mario
Merazomo said:
I picked one up on Black Friday, and decided to root it. I was only able to install an older version of SuperSU though (v2.46). First I had to install the PC version of KingRoot (It's in Chinese I believe, but middle button is always "next" or "yes"), root the phone, and then replace KingRoot with SuperSU. Took me a few tries.
This is the guide I used from the forum:
SuperSU Me_6.4.apk
KingRootSetup v3.2.0.1129.exe
1. install kingrootsetup on pc(must have internet connection to work)
2. connect ur phone with ADB enabled from developers option
3. root ur phone by following on screen instructions...
4. after rooting,install supersume on phone
5.open the app,click on big blue button and wait...
done,replaced kingroot with supersu..
-Mario
Click to expand...
Click to collapse
Hey I used this app to remove king root and my phone bricked do you know how to fix?
ipodhero said:
Hey I used this app to remove king root and my phone bricked do you know how to fix?
Click to expand...
Click to collapse
My Alcatel Ideal 4060A froze a few times during the removal of KingRoot, but all I did was: turn off the phone, remove the battery, and finish the procedure once the phone was on. The phone was only $10 on Black Friday, so you could say it was only an experiment on my part. Unless it's a really good phone, where you can go to the manufacture's website and download the original firmware and install it through your PC, there's not much you can do to unbrick a cheap phone that is practically unknown.
Merazomo said:
Mario
Click to expand...
Click to collapse
Thank you Mario for your help! I'm having a little trouble having my phone being recognized by Kingroot, although I have ADB enabled from the developers option, it seems not to pickup my phone still. I'm still trying though and I'll let you know if I get it to work properly, and perhaps document my mistake so others following this post who happen to have the same problem could know what to do.
- Jessy
*UPDATE*
Just wanted to update that I found out what was my mistake, which is a really simple and basic mistake, I apologize!
What I did was that after I had enabled ADB through my phone, it was already connected to my PC right after I had downloaded Kingroot, so my solution here was simple. I turned off my phone first, then I turned it back on while still connected with Kingroot still running then Kingroot finally read my phone and it rooted it as you outlined. Thanks again for your help, it is too valuable for me!
Here's the guide that I'm following so that I could install more apps to the phone through my 64 GB SD card if you guys were interested, to make the phone more useful, and I also installed my obama phone SIM card on it as well (from lifeline wireless, because hey why not? )
Here's the link to add more internal memory to this phone
www
.howtogeek.
com/114667/how-to-install-android-apps-to-the-sd-card-by-default-move-almost-any-app-to-the-sd-card/
shushi_boi said:
Thank you Mario for your help! I'm having a little trouble having my phone being recognized by Kingroot, although I have ADB enabled from the developers option, it seems not to pickup my phone still. I'm still trying though and I'll let you know if I get it to work properly, and perhaps document my mistake so others following this post who happen to have the same problem could know what to do.
- Jessy
*UPDATE*
Just wanted to update that I found out what was my mistake, which is a really simple and basic mistake, I apologize!
What I did was that after I had enabled ADB through my phone, it was already connected to my PC right after I had downloaded Kingroot, so my solution here was simple. I turned off my phone first, then I turned it back on while still connected with Kingroot still running then Kingroot finally read my phone and it rooted it as you outlined. Thanks again for your help, it is too valuable for me!
Here's the guide that I'm following so that I could install more apps to the phone through my 64 GB SD card if you guys were interested, to make the phone more useful, and I also installed my obama phone SIM card on it as well (from lifeline wireless, because hey why not? )
Here's the link to add more internal memory to this phone
www
.howtogeek.
com/114667/how-to-install-android-apps-to-the-sd-card-by-default-move-almost-any-app-to-the-sd-card/
Click to expand...
Click to collapse
No problem. I'm glad you got the phone rooted. I originally picked up the phone to use as an MP3 player, so I removed most of the unnecessary stock apps with "System app remover (ROOT)", but now that I see how good the phone is (at that price), I plan to use it as a backup phone. It even has a notification LED light for unopened messages LOL; anyway, good luck.
My Alcatel bricked too using this method stuck at boot logo and does nothing... Any fix?
Thanks for writing rooting method for Alcatel 4060a Ideal Pop445. Need some help
Merazomo said:
I picked one up on Black Friday, and decided to root it. I was only able to install an older version of SuperSU though (v2.46). First I had to install the PC version of KingRoot (It's in Chinese I believe, but middle button is always "next" or "yes"), root the phone, and then replace KingRoot with SuperSU. Took me a few tries.
This is the guide I used from the forum:
SuperSU Me_6.4.apk
KingRootSetup v3.2.0.1129.exe
1. install kingrootsetup on pc(must have internet connection to work)
2. connect ur phone with ADB enabled from developers option
3. root ur phone by following on screen instructions...
4. after rooting,install supersume on phone
5.open the app,click on big blue button and wait...
done,replaced kingroot with supersu..
-Mario
Click to expand...
Click to collapse
I've been an iPhone user for many years, I'm almost new to android. I have unlocked the bootloader from the hidden developers options in the settings app. I haven't found any thing useful to root my new Alcatel Ideal 4060a (Pop 445) (at&t unlocked). There are tons of bloatwares and many apps that I can't transfer to sd card. I hope you two can help me out here as I don't want to brick my device.
Question 1: Do jessy did something wrong(regarding your given steps to root) that makes her device rooted OR she has just been lucky? Because someone just posted that he/she has bricked his/her device.
Should I go ahead and try my luck with your method you there would be some advice you would like to give?
Question 2: If I would be able to root this device, would I be able to install Android 6.0 Marshmellow?
Don't root this yet
Source thread:
http://forum.xda-developers.com/android/help/alcatel-ideal-4060a-bootloader-custom-t3476422/
c627627 said:
Same answer ValdamarlSaCOCK was given, goes to you too, feel free to ask any questions:
http://forum.xda-developers.com/devdb/project/dl/?id=21707
Click to expand...
Click to collapse
Rooted already.
faxanidu said:
Don't root this yet
Click to expand...
Click to collapse
I have rooted with Kingroot 5; latest windows version on their website. Now I'm working on replacing it with Supersu or Supersu-me.
I think there always be some solution as far as you are seeing something on your phone's screen.
Just a note from another user with an Alcatel Ideal 4060a... (got for $10 from Best Buy on Black Friday)
Don't try using King-O-Root, then proceed to install Super SU from Google Play. It works that first launch, but on rebooting...
It's permanently bricked. And yes, I tried everything, including adb, recovery (doesn't have an option to flash a rom), from-pc flashing (wouldn't connect/wasn't recognized by adb or the other tools), fastboot (wouldn't launch), etc.
I don't know about the alternate Kingroot app, though. That probably works as some people have said it does for this model.
I was stupid and assumed King-O-Root would work as well, since it seems pretty generic and worked for another phone. I've learned my lesson and will now only follow guides for the specific phone model I have.
Why am I even writing this if it's a different rooting app? Cause I spent 6 hours just to end up killing one of my phones, and this is my best attempt at feeling like there was some worth to the waste. (the chance of preventing someone else the misfortunate, and just ranting)
Anyway, I'm going to bed. (So annoying because I only barely was brash enough to go ahead without a phone-specific guide--was on the fence, but landed on the unfortunate side) Argh! Argh! Argh!
Venryx said:
Just a note from another user with an Alcatel Ideal 4060a... (got for $10 from Best Buy on Black Friday)
Don't try using King-O-Root, then proceed to install Super SU from Google Play. It works that first launch, but on rebooting...
It's permanently bricked. And yes, I tried everything, including adb, recovery (doesn't have an option to flash a rom), from-pc flashing (wouldn't connect/wasn't recognized by adb or the other tools), fastboot (wouldn't launch), etc.
I don't know about the alternate Kingroot app, though. That probably works as some people have said it does for this model.
I was stupid and assumed King-O-Root would work as well, since it seems pretty generic and worked for another phone. I've learned my lesson and will now only follow guides for the specific phone model I have.
Why am I even writing this if it's a different rooting app? Cause I spent 6 hours just to end up killing one of my phones, and this is my best attempt at feeling like there was some worth to the waste. (the chance of preventing someone else the misfortunate, and just ranting)
Anyway, I'm going to bed. (So annoying because I only barely was brash enough to go ahead without a phone-specific guide--was on the fence, but landed on the unfortunate side) Argh! Argh! Argh!
Click to expand...
Click to collapse
Any solution for this? I want to replace King-O-Root with Super SU.
None that I know of.
I have another Android phone that I was also trying to get root on, and that one gets it temporarily using King-O-Root as well, but I'm too paranoid to try to make it permanent on that second one. Losing both my Android phones would be too painful.
If anything, I guess try the KingRoot program, from the pc, and then use the "SuperSU Me" app, as the person on the first page of this thread described. That way worked for at least one person apparently. (though the poster just after said it bricked theirs, so beware)
By the way, is your root from King-O-Root temporary (till restart) or permanent? I installed Super SU during the same launch I used King-O-Root, so I never got to see whether King-O-Root itself would have worked as a permanent (though non-ideal) solution. (I know that on my other Android phone it's temporary)
King-O-Root = Bricked Phone
KingRoot5 = Root Successful + it is possible to replace with SuperSU
http://forum.xda-developers.com/devdb/project/dl/?id=21707
Recovery Retrieved!
I was able to pull the recovery from this phone. Can someone make TWRP for this device using the stock recovery?
Here is the actual recovery image file that I pulled:
(Forgot my old XDA password, had to make another account. Can't post links)
https://drive.google.com/file/d/0B9sabhOnOJ42eXg3Vzlxd1liamc/view?usp=sharing"]https://drive.google.com/file/d/0B9sabhOnOJ42eXg3Vzlxd1liamc/view?usp=sharing
Ch3if-0f-Skull5 said:
I was able to pull the recovery from this phone. Can someone make TWRP for this device using the stock recovery?
Here is the actual recovery image file that I pulled:
(Forgot my old XDA password, had to make another account. Can't post links)
https://drive.google.com/file/d/0B9sabhOnOJ42eXg3Vzlxd1liamc/view?usp=sharing"]https://drive.google.com/file/d/0B9sabhOnOJ42eXg3Vzlxd1liamc/view?usp=sharing
Click to expand...
Click to collapse
Did you manage to unlock the bootloader? If not then you cant flash anything and building twrp would be useless.
arolust said:
Did you manage to unlock the bootloader? If not then you cant flash anything and building twrp would be useless.
Click to expand...
Click to collapse
I pulled the boot file. Could someone maybe look at that? I cannot boot to the bootloader.
I could try to flash_image twrp to the recovery and try that.
I got this phone on black friday, shortly after I got root with kingroot 5 pc and it was all great, however I got greedy and replaced kingoroot with supersu :silly:. First reboot and it goes into boot loop. Now its been sitting in a drawer. I think that purify deleted some app it looks at boot.
It looks like the simplest way to get a restore is 'IF' TCL/Alcatel does an update, someone intercepts the signed zip file, then that zip file could be distributed and used with the stock restore.
Hopeful everyone here can work a better solution... thanks for all your hard work everyone.
yes u r right
many time happen with me, Happen with me on asus KA10, But i got fastboot update img lucky. hope that u will get Fast boot image some day or we may able to get recovery for this device . in that case your your phone may start working
---------- Post added at 01:37 PM ---------- Previous post was at 01:36 PM ----------
the core question "How to unlock Alcatel Ideal 4060A (walmart) Bootloader?" still unanswered. Kindly help.
My phone is rooted, but not able to unlock bootloader so far ...

Categories

Resources