Related
HELP!!!
I just bought a new Samsung Galaxy Tab 2 10.1 and I attempted to root it via the instructions from XDA. Now all I get is a screen that says "Samsung GALAXY Tab 2 10.1"
Did I just screw this up or is there a way to reset it?
Somehow, I am hoping that this didn't totally screw it up.
I can get into the "Warning" screen. But that's all. When I try and shut it off, it comes back to the black screen with "Samsung GALAXY Tab 2 10.1"
1387 said:
HELP!!!
I just bought a new Samsung Galaxy Tab 2 10.1 and I attempted to root it via the instructions from XDA. Now all I get is a screen that says "Samsung GALAXY Tab 2 10.1"
Did I just screw this up or is there a way to reset it?
Somehow, I am hoping that this didn't totally screw it up.
I can get into the "Warning" screen. But that's all. When I try and shut it off, it comes back to the black screen with "Samsung GALAXY Tab 2 10.1"
Click to expand...
Click to collapse
I can not get it to display the 2 icons. By pushing the uo volume button and the on/off button, I get a big android icon. Under the android it says "Downloading... Do not turn off target!!
In the upper left corner, it says: ODIN MODE Product Name: GT-P5113 Custom Binary Download: YES (2 Counts) Current Binary: CUSTOM
1387 said:
I can not get it to display the 2 icons. By pushing the uo volume button and the on/off button, I get a big android icon. Under the android it says "Downloading... Do not turn off target!!
In the upper left corner, it says: ODIN MODE Product Name: GT-P5113 Custom Binary Download: YES (2 Counts) Current Binary: CUSTOM
Click to expand...
Click to collapse
sounds like your already in download mode?? If the galaxy tab 2 is the same as the original you need to press the power button and volume down button together and release the power button only when you see the samsung galaxy tab writing, that will then put you to the bootloader screen that shows the 2 icons which I think you mean.
You then press the volume up button to make your selection, if its on the android icon it will put you into download mode which then shows the warning sign which you then press the volume up button to get to the screen where it says downloading... do not turn off target!! This sounds like the point where you are at.
You then need to connect your tab to your pc and use odin
are you using these instructions http://forum.xda-developers.com/showthread.php?t=1474971 ???
verbkpf82 said:
sounds like your already in download mode?? If the galaxy tab 2 is the same as the original you need to press the power button and volume down button together and release the power button only when you see the samsung galaxy tab writing, that will then put you to the bootloader screen that shows the 2 icons which I think you mean.
You then press the volume up button to make your selection, if its on the android icon it will put you into download mode which then shows the warning sign which you then press the volume up button to get to the screen where it says downloading... do not turn off target!! This sounds like the point where you are at.
You then need to connect your tab to your pc and use odin
are you using these instructions http://forum.xda-developers.com/showthread.php?t=1474971 ???
Click to expand...
Click to collapse
*************************************************************************************************************************************************************************
I was, but I am now stuck on the black screen with "Samsung Galaxy Tab 2 10.0".
I made it to here, but I don't have a SD card installed.
Put the Samsung_Galaxy_Tab_10.1_root.zip onto the ROOT of your SDCARD/USBSTORAGE.
Next we want to power the tab off.
With the Tablet off boot into Recovery Mode
Now I always Wipe/Data Factory Reset 3X, Wipe Cache 3X and Wipe Dalvik Cache 3X as well.
I do this because I'm anal and it's less chance of things going wrong with the flash so make sure you have everything backed up you need.
However wiping all this from CWM will NOT delete your SDCARD/USBSTORAGE.
After you have wiped everything........
Select Install zip from sdcard
What should I do next? Do I have an OS installed on my Tab?
scrap what I said, your in the wrong section, there is a different section for the galaxy tab 2 10.1 that you need to go to, read as many of the threads as possible to get a better understanding and make sure you follow the correct instructions for your model number. It's different to the original. One of the threads on there is this one. http://forum.xda-developers.com/showthread.php?t=1657056
Sent from my GT-P7510 using xda app-developers app
verbkpf82 said:
scrap what I said, your in the wrong section, there is a different section for the galaxy tab 2 10.1 that you need to go to, read as many of the threads as possible to get a better understanding and make sure you follow the correct instructions for your model number. It's different to the original. One of the threads on there is this one. http://forum.xda-developers.com/showthread.php?t=1657056
Sent from my GT-P7510 using xda app-developers app
Click to expand...
Click to collapse
I don't know what happened, but the TAB is back to normal. I downloaded a file from the link you gave and ran Odin again. Now it has Android 4.0.4 back on it. Thanks.
currently my galaxy tab m180s (p1000) works pretty much fine. It boots and I can use it. However, today I wanted to revert it to stock but I simply can't... I can not enter recovery or download mode by pressing power + vol down on boot, simply nothing happens. Any ideas what I can do?
and when the tab opened this picture appear plz i need help im33.gulfup. com/ yontT.jpg because am a new registerd i cannt upload pictures
This forum is for tab 10.1 P7500/10..
Sent from my GT-P7500 using XDA Premium HD app
Hello.
I installed the official firmware via Kies.
Thereafter, charging plate, nothing happens on the screen. The screen lights up, but no picture. After some time, heard a welcome sound. Then press the power button the screen and then re-enable the screen that would go to the unlock screen - that is, image appears on the screen and on the tablet works fine.
I tried to enter download mode. When you press the volume - and the power button the screen just lights up but no picture. Then that would go into a mode, you need to blindly press buttons as you remember. Download In the picture did not appear, and in the installation menu appears base with a choice of a full wipe, wipe cache, install from SDcard and from the cache, restart the device. But when set to SDcard tablet gives the inscription E: Unknown volume for path [/sdcard]
What happened to the screen and how is it treated? (the problem is not the hardware - the system works after download)
GalaxyTab 10.1 GT-P7500 Android 4.0.4, firmware P7500XXLQ8, core 3.1.10-1117964 (have NO root:crying
You went to the wrong mode lol...that was recovery mode. Download mode is the right one. Then, you connect to PC and reflash stock ICS via Odin and see if your problem goes away.
In case you don't know, go to www.sammobile.com and download your desired country's firmware.
Sent from my GT-P7500 using Tapatalk HD
eushaun99 said:
You went to the wrong mode lol...that was recovery mode.
Click to expand...
Click to collapse
I established a mode for my model. I downloaded from sammobile a mode for the device. I have GT-P7500. It was possible to be mistaken only if in archive for p7500 other mode lies. But it is impossible?
IvannnnXXI said:
I established a mode for my model. I downloaded from sammobile a mode for the device. I have GT-P7500. It was possible to be mistaken only if in archive for p7500 other mode lies. But it is impossible?
Click to expand...
Click to collapse
I have no idea what you just said. Established a mode?
Sent from my GT-P7500 using Tapatalk HD
Hello,
I was attempting to clear the data off of the i777 through the settings and now I am stuck at the "Samsung Galaxy S2" screen bootlooping. I did not have a microSD card in the device and I believe that was my downfall.
I can enter download mode but nothing else. What is the recommended procedure for this?
Sent from my Nexus 7 using Tapatalk 4
The good news is that you can enter download mode. Without knowing anymore about what firmware you were using, or what you want to return to, I simply suggest using ODIN 1.8x to flash the stock ucmd8 jb 4.1.2 firmware.
firmware can be found in creepy's download repository, or directly from samsung.
-Cyril
d0wnti.me said:
Hello,
I was attempting to clear the data off of the i777 through the settings and now I am stuck at the "Samsung Galaxy S2" screen bootlooping. I did not have a microSD card in the device and I believe that was my downfall.
I can enter download mode but nothing else. What is the recommended procedure for this?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
---------- Post added at 12:12 PM ---------- Previous post was at 12:09 PM ----------
...if you can enter download mode, then you can also enter recovery. if you are using an i777 (not i9100):
recovery mode: vol+ & vol- & power with usb cable UNPLUGGED
download mode: vol+ & vol- & power with usb cable PLUGGED IN
I can only get download mode, unable to enter recovery.
Also I found instructions on ODIN and I cannot get passed the step where the device needs to be recognized by USB, I tried other ports and no luck.
This is my first time with using Odin.
Previously installed rom was SHOstock v4.0
Sent from my Nexus 7 using Tapatalk 4
d0wnti.me said:
Hello,
I was attempting to clear the data off of the i777 through the settings and now I am stuck at the "Samsung Galaxy S2" screen bootlooping. I did not have a microSD card in the device and I believe that was my downfall.
I can enter download mode but nothing else. What is the recommended procedure for this?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
1) Whether you had an external sd card or not is irrelevant.
2) What exactly did you do to "clear the data?"
3) As Cyril said, you should be able to get into recovery. If you can, perform a wipe data/factory reset from within recovery and see if that allows the phone to boot.
Edit: Please answer 2, and explain what happens when you try to enter recovery.
I went settings - > clear user data and it went into bootloop after that.
As for trying to enter recovery, the screen goes blank and then goes back to the Samsung screen
Sent from my Nexus 7 using Tapatalk 4
@d0wnti.me, Did you install the latest Samsung mobile USB drivers on your PC?
@creepyncrawly , Is it possible to kill recovery but not the bootloader?
d0wnti.me said:
I can only get download mode, unable to enter recovery.
Also I found instructions on ODIN and I cannot get passed the step where the device needs to be recognized by USB, I tried other ports and no luck.
This is my first time with using Odin.
Previously installed rom was SHOstock v4.0
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
cyril279 said:
@d0wnti.me, Did you install the latest Samsung mobile USB drivers on your PC?
@creepyncrawly , Is it possible to kill recovery but not the bootloader?
Click to expand...
Click to collapse
Yes I did, then rebooted the pc and nothing. Hopefully I can get it resolved by the end of this weekend. I appreciate your input, greatly.
Sent from my Nexus 7 using Tapatalk 4
d0wnti.me said:
I went settings - > clear user data and it went into bootloop after that.
Click to expand...
Click to collapse
There is no such option that I am aware of.
Do you mean "Settings > Back up and reset > Factory data reset" or "Settings > Storage > Format USB storage." Those are the only two options that would even come close to "clear user data" as far as I am aware.
As for trying to enter recovery, the screen goes blank and then goes back to the Samsung screen
Click to expand...
Click to collapse
Try holding down all three buttons continuously while the Galaxy SII screen appears, screen goes black, and Galaxy SII screen appears the second time, then release the buttons.
creepyncrawly said:
There is no such option that I am aware of.
Do you mean "Settings > Back up and reset > Factory data reset" or "Settings > Storage > Format USB storage." Those are the only two options that would even come close to "clear user data" as far as I am aware.
Try holding down all three buttons continuously while the Galaxy SII screen appears, screen goes black, and Galaxy SII screen appears the second time, then release the buttons.
Click to expand...
Click to collapse
1. I wasn't really paying attention to the process, I think it was factory data reset.
2. Just tried that and nothing happened.
Sent from my Nexus 7 using Tapatalk 4
d0wnti.me said:
1. I wasn't really paying attention to the process, I think it was factory data reset.
2. Just tried that and nothing happened.
Click to expand...
Click to collapse
1) I'm not clear about the reasons for this fact, but performing a factory data reset from within settings while the system is booted sometimes causes issues. I'm also not sure if that is the cause of your issue, although there does seem to be a direct correlation. For future reference, you should always perform a reset by entering recovery and performing a "wipe data/factory reset"
2) Again, I'm not sure what the damage is, but I'm going to assume that it is a firmware issue and not a hardware issue. The first thing I would suspect is nand read/write corruption, which can be recovered through download mode.
So, since the phone will go into download mode, the first order of business is getting the computer to recognize it so that you can connect to Odin. Odin3 v1.85 is recommended. If you don't have it, download from XDA-Developers. Open Odin on the desktop and then put the phone into download mode. The sequence is important, as Odin must be open first. Hold down both volume buttons but not the power button, and then plug the USB cable into the phone. In Odin you will see "Added" in the comments area.
Once you are able to get Odin to recognize the phone, I will post how to recover from nand r/w corruption. So try the above and let me know your results and we'll go from there.
Full instructions on how to use stand-alone Odin3 to flash firmware, if you need it:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85. It should work with any version of Odin, but some details, like color of items, may be different.
1.) Open Odin on the Windows Desktop.
2.) Have the USB cable plugged into USB port on the computer, but *Not* plugged in to the phone.
3.) Shut the phone off.
4.) While holding down the vol+ & vol- keys, plug micro-usb plug into phone.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing.
Update: I was unable to get anything done with the device, so I sold it on eBay as-is.
Sent from my Nexus 7 using Tapatalk 4
I tried to install the 4.0.4 rom on my samsung galaxy tab 10.1 and since it is stuck on the screen samsung galaxy tab 10.1. somebody could help me?
model: samsung galaxy tab 10.1 GT-P7500V (Canada)
Funtastik said:
I tried to install the 4.0.4 rom on my samsung galaxy tab 10.1 and since it is stuck on the screen samsung galaxy tab 10.1. somebody could help me?
model: samsung galaxy tab 10.1 GT-P7500V (Canada)
Click to expand...
Click to collapse
Describe what ever you did from the beginning please in short...
Samsung Galaxy tab 10.1 stuck on boot screen
jime1 said:
Describe what ever you did from the beginning please in short...
Click to expand...
Click to collapse
I have done
Download Odin 3 v1.85
Download v.4.04 - ITV - P7500XXLQ8-P7500OXALQ8 - Original
Start Odin. In Odin select only 'Auto Reboot' and 'F-Rreset.
Since it is the original firmware, there is not not a select: Re-Partition
Click the PDA button and select the firmware
Put the tablet to Downloading
Connect the tablet to the PC via the USB cable
Press the START button. And here we go ... until the first square box in Odin will turn green, indicating PASS
Go into recovery, factory reset and try again.
Sent from my GT-P7500 using Tapatalk
Samsung Galaxy tab 10.1 stuck on boot screen
eushaun99 said:
Go into recovery, factory reset and try again.
Sent from my GT-P7500 using Tapatalk
Click to expand...
Click to collapse
I can not make recovery or factory reset, the screen remains black :crying:
Funtastik said:
I can not make recovery or factory reset, the screen remains black :crying:
Click to expand...
Click to collapse
You should contact Inkslinger420
He will surely help you:thumbup:
Sent from my Explorer A310e using xda app-developers app
Funtastik said:
I can not make recovery or factory reset, the screen remains black :crying:
Click to expand...
Click to collapse
Hold down the power button + volume down button. That should lead you to the bootloader screen, where there's two options, one is download mode, the other is recovery mode. Select the recovery mode. From there, use the volume buttons to navigate to the factory reset option.
Sent from my GT-P7500 using Tapatalk
Samsung Galaxy tab 10.1 stuck on boot screen
eushaun99 said:
Hold down the power button + volume down button. That should lead you to the bootloader screen, where there's two options, one is download mode, the other is recovery mode. Select the recovery mode. From there, use the volume buttons to navigate to the factory reset option.
Sent from my GT-P7500 using Tapatalk
Click to expand...
Click to collapse
exactlyI tried everything that you say, but when I selected the recovery mode the screen stays black. :crying:
Funtastik said:
exactlyI tried everything that you say, but when I selected the recovery mode the screen stays black. :crying:
Click to expand...
Click to collapse
Then download the recovery from http://droidbasement.com/galaxy/roms/cm10.1/p4/ and flash it in Odin. Then wipe system, data, dalvik and cache this time.
Sent from my GT-P7500 using Tapatalk
Do you still get into Odin?
If not, I guess you need a USB-JIG...