Hello
I have a problem, that seems to be related to the 2.1 update, since I haven't had this problem before. I've flashed both with versions from here and generic nordic version so I have tested several times from scratch.
I have roomies with the same phonemodel and carrier that have no problems. One of them use 1.6 and one 2.1.
My problem seems to be that the phone can't save and decide what NW to choose. Often I can have several text message dropping in at once several hours late. Often when I try to call I have to try up to ten times before the call connect, and most of the time when people call me they get I'm not available.
Seems it's no change if I kill everything non standard or even directly after re-flash. Do anyone of you know these problems and have an idea if it could be HW, SW or perhaps sim releated?
Since my roomies have the same phone and came carrier I doubt it's the carrier itself causing this. Both GSM and 3G coverage is great in the area. It can be noted that if I manage to get the 3G connection running, talking over SIP is 100%, but over GSM the receiver can have problems hearing me and sometimes I get this robotvoice.
So, for me it seems the radio firmware can be a bit off here, but is there anyway I can replace this separately or do you know of any fix that resolve the NW carrier settings that the phone seem to forget?
i seem to be having the same problem regarding delayed sms messages...
can anybody help please?
why not switch phones with your room mates and see if the problems follows the phone or the sim.
Mine is actually worse. SMSes doesn't even reach my phone. It happen twice already ( once in 1.6 and the second time in 2.1) Both time I solve the issue by reinstalling the phone software via pc suite. You should do the same
I have the same problem, i reinstalled the Cyanogen using xrec, and problem still exists.
Maybe anyone have some hints how to solve it?
Bought the Atrix last week and unlocked it with the help from the webshop as I'm in Belgium, no problem connecting to Mobistar wich is my provider and data connections works great. But I'm having real problems making phonecalls and recieving calls; the phone reboots or the dialer hangs and it looks like a call is going on when it's not, phone still works but flashing green in the notification area and it's impossible to hang up, need to reboot. This happens like 80% of the times I try to make a call. After a reboot it works fine to call and hang-up one or two times then it crashes again.
Also noted that my Dialer often runs twice in the Running Apps manager - is that normal??
Anyone having the same issues or know what to do, reinstall the Dialer app --> if so how? Is it a hardware or software problem??
A little more info: when I recieved the device it was in a sealed Atrix box but the phone was used and already had an active Blur account so I had to do a hard reset to be able to use it... --> was it returned 'cause of faulty dialer or radio... then resold to me... not nice if so...?
Tried to install dialer one app but it seems only to skin the original dialer...
It's a greate device and works great othervice but in the end it's still a phone... which should be able to make calls...
Help
Ive got an unlocked Atrix too and now in Germany, I have the same problem. Motorola should definitely look into this.
Here's a quick fix for it thou, (not permanent)....
1. type *#*#4636#*#* on the dialer
2. Chose Phone Information
3. Set preferred network to GSM only
Viola...its fixed
problem with this fix is that you wont be able to use your 3G network but the dialer should be working.
Thanks Nazrin (for both replies) !!
It sure did the trick, though no data access is not acceptable on a phone like this!!!
So this meens that all unlocked Atrix's in european GSM networks have the same problems? Haven't seen any others reporting this and there are quite a few in use I've noted in other forums.
Was thinking of trying to have mine replaced (which probably won't be easy and take long time...) but that won't change anything then??
We have to wait for the european version of Atrix rom I suppose??
Any others with the same problem??
No problems buddy, glad it worked..and i have to agree with you..this bug is unacceptable...it seems the phone just ***** up everytime it calls on utms (3g)...im sure there is more people with this problem...
Sent from my Supercharged MOTO ATX
I have the same problem
Hi guys, I have the same exact issue (I'm also in Belgium, on Mobistar). I'm somewhat glad to hear this is a generic issue, and not an issue with my specific phone. At least I can be fairly certain replacing it won't solve this issue then.
I made another post here before I came across this one, has a bit more info: we are seeing modem panics when using 3G + outbound call. I've also contacted Motorola support to no avail:
http://forum.xda-developers.com/showthread.php?t=1028771
You can also read there that I tried another operator, and it did not crash with that one (although 3G did disconnect).
Hopefully Motorola/Qualcomm will start to notice the bug when they release the phone globally, and release a fix.
Either that, or we all have phones from the same bad batch
This bug is really bad for users in europe....cant call on utms...
I really hope motorola takes this seriously cos if there's no fix via software updates then its moto gone for me
Guys, you are all on unlocked att atrix right? I do believe it is a simmiliar software glitch/bug/lock that you have porblems using it on non att networks as the problem with the wifi that it stops working for some of us (check the thread about it for more info). As all suggests there it is a config file problem, unfortunately i or anyone else doesnt know yet which one....
Yeah maybe..but funny thing is wifi is working without a glitch...will have to read that forum later...
Workaround options
So, since it seems we're not gonna get this fixed until there is a new radio/modem firmware available for flashing (and even then..), I've been looking for a workaround.
Found two potential applications that could do what we need: disable data completely when making an outgoing call, or switch to 2G:
- Sanity
- Superpower
I've tested the first (Sanity), and it does not work (fully). It does seem to disable data, but the bands aren't switched so our problem remains. I've contacted the developer here: http://tagliamonte.net/forum/thread-10.html. He seems to be very responsive, so given enough interest, I think he would add the functionality we require.
The second app I only came across today, and have not tried yet. It does not have a function to specifically switch bands when making an outgoing call, but it has a trigger for "Foreground application", so if we make that the dialer/contacts... Question remains if it will be able to do the switch.
Hopefully one of these will lead to a decent workaround for all of us!
Well done unknown...i will try these apps... but the real fix should be from moto...im always reading the net for anything that can solve this issue
reboots on incoming and outgoing calls
Same in Russia on Megafon network, I had to enter 4636 menu and use it as "GSM only". Even this does not fully solve problems, e.g. call forwarding does not show the new destination number while it does actually make the phone divert calls correctly.
My hope is that UK release will trigger new software version which will address this issue. ANYONE has news on this?
FIXED!
YAY! I just fixed this issue
What you need to do: flash the radio from this thread:
http://forum.xda-developers.com/showthread.php?t=1052914
You have to use RSD-lite, since sbf_flash will not work. Flash the 1.87 baseband and enjoy working HSPA (including unlocked upload speeds ^^)
Now I can finally appreciate this phone fully
Enjoy guys!
_unknown said:
YAY! I just fixed this issue
What you need to do: flash the radio from this thread:
http://forum.xda-developers.com/showthread.php?t=1052914
You have to use RSD-lite, since sbf_flash will not work. Flash the 1.87 baseband and enjoy working HSPA (including unlocked upload speeds ^^)
Now I can finally appreciate this phone fully
Enjoy guys!
Click to expand...
Click to collapse
Worked for me as well..brilliant!!!! its working here in germany.....but I wonder the telstra radio will work in my home country with frequencies of 900/2100
Motorola Atrix restart when placing a call
I just got the same exact Dialer problem now, but the flash radio file is gone* in the pointed post, and I don't know exactly how to flash the radio.
Someone can help me? I need the radio file and step by step instruction to how to flash it.
BTW my Atrix 4G works perfect for a year till this Dialer problem started past week.
I also use my phone as a full Linux computer when docked, and it works very fine.
Thanks
* The file was on megaupload, that was closed
No answer
Why I never got an answer of any post I did?
There is something wrong?
Eli
elijacob said:
I just got the same exact Dialer problem now, but the flash radio file is gone* in the pointed post, and I don't know exactly how to flash the radio.
Someone can help me? I need the radio file and step by step instruction to how to flash it.
BTW my Atrix 4G works perfect for a year till this Dialer problem started past week.
I also use my phone as a full Linux computer when docked, and it works very fine.
Thanks
* The file was on megaupload, that was closed
Click to expand...
Click to collapse
Forget about those ways
klingsurf said:
Bought the Atrix last week and unlocked it with the help from the webshop as I'm in Belgium, no problem connecting to Mobistar wich is my provider and data connections works great. But I'm having real problems making phonecalls and recieving calls; the phone reboots or the dialer hangs and it looks like a call is going on when it's not, phone still works but flashing green in the notification area and it's impossible to hang up, need to reboot. This happens like 80% of the times I try to make a call. After a reboot it works fine to call and hang-up one or two times then it crashes again.
Also noted that my Dialer often runs twice in the Running Apps manager - is that normal??
Anyone having the same issues or know what to do, reinstall the Dialer app --> if so how? Is it a hardware or software problem??
A little more info: when I recieved the device it was in a sealed Atrix box but the phone was used and already had an active Blur account so I had to do a hard reset to be able to use it... --> was it returned 'cause of faulty dialer or radio... then resold to me... not nice if so...?
Tried to install dialer one app but it seems only to skin the original dialer...
It's a greate device and works great othervice but in the end it's still a phone... which should be able to make calls...
Help
Click to expand...
Click to collapse
[Sorry for problem in speaking]
i had that problem too , im using CM13 with Marshmallow Version of android
So . the easy way is :
***** search "Default" in settings. then choose " System dialer" as Default ! just it ****
but if there is no search bar in your setting . try this patch:
Android 6 : Setting/Apps then click the setting icon on top(may be diffrent in your case) , then Click on "default ...." then choose " System dialer" as Default! :fingers-crossed:
but in some cases that it didnt work . they have to reinstall gapps .
Or in official Roms , reset will be usefull
any quastions?
Hi guys , first of all I'm running Android 4.2.2 with room xDroidH 4.0 . I don't know if that could be the problem but anyway I'm giving it out
Well , now I'm on T-Mobile and the phone "works" , because I can send and recieve sms. When I call I can't heard anything and it seems that they could not heard me too. For me that's weird and I can't understand where is the problem . I've read some post that says that it could be an hardware problem or something with the "modem" and I don't really know what to do.Should I flash another rom?.
When I play music , sounds works perfect and voice recorder record pretty well . I've also tried skype and it works like a charm , so that's why I think that it must to be something related with software and not with microphone. Or maybe I'm wrong and it's a part of the phone that's only used to calls and have nothing to do with the microhone.I really don't know and that's why I'm asking for help,
Maybe there is any way to test that is an hardware issue and not software?
Thanks for reading
Any clue?
Dear community,
I'd like to adress an issue which occured on my i9300 after the udate to jelly bean over a year ago. It was the last official firmware update for the device and I was using the stock rom then. Soon, I noticed a huge distortion of my dialogue partner's voice and even the dial tone during hands-free in my car. Talking hands free is not possible because of that if the issue occurs. Random switching on and off the mobile seems to fix it sometimes, but not reproducibly. Meanwhile I am using kit kat via SlimRom (Slim-i9300 4.4.4. build. 9.0-OFFICIAL-8312) with Boeffla kernel (boeffla-kernel-2.8-Omnirom-i9300.recovery), and the problem still persists. Switching from bluetooth to phonespearks and back during a call sometimes fixes the issue, but sometimes it even worses it. Basically, sometimes distortion is there, sometimes not. On the web I found a few reports of the problem without solutions. Recently, I tried several modems / radios for my device because I had heared that might fix the problem, but to no avail. I further tried to alter the audio seetings in engineerig / service mode like suggested in this thread, but encountered a "locked" Audio-submenu - I simply cannot open it, while all the other options worked. This seems to happen and people say to change your modem, like in this S2-Thread. However, all the modems which I tested neither enabled me to enter the audio-menu, nor fixed the main issue - the distortion. Lastly, I dug up this thread mentioning to unblock the keystring-file in order to access the audio menu, but I have no idea what exactly I should do. Apart from this, I have no clue whether fiddling around in the service/audio-menu can fix the distortion-issue anyway. I should add that the device's speakers work flawlessly during non-hands-free calls. Furthermore, transmitting music via bluetooth to my car never causes distortion. Also, other devices, among which a S4 with lollipop, do not cause distortion.
So, long-story short: Can anyone help with the distorted audio-issue during hands-free? I now rely on hands free communication and will have to switch to a reliable device if I can't get it to work on my i9300. Thank you very much. Obviously, downgrading to a pre-jelly bean-Android might also fix the issue, but to be honest I don't want to give up all the benefits of kit kat in terms of usability.
Best regards!
Hello,
I got this phone since my former one died without notice (coming from a 5 year old oneplus one), it's my god daughter's previous one.
Working good smooth and all on stock rom (seems to be carrier customed, bundled with carrier apps) : Sony XPeria X F5121 / android 8.0, build 34.4.A.2.118 Sept 1 2018 / kernel 3.10.84 Aug 24 2018
I have a slight problem : whenever I'm calling, I have to put the "hands free" mode with speakers otherwise nobody can hear me. I don't think the microphone is broken and I am thinking of a "bug" in the rom.
Before re-installing my apps, i could call and people could hear me. The phone app is the stock one.
If I speak right in front of the microphone, but like shouting, people can hear me but at very low level.
Searched a bit on the internet, but didn't find anything about this, some people say it is because other apps are conflicting, I tried to remove every app I can think of using the microphone (whatsapp, line, etc), but didn't changed a thing, tried to tune the "noise reduction" in google voice search, but didn't worked either.
If I try to audio call with whatsapp, facebook messenger lite or line, people can't hear me. Using google voice search works without flaws.
Before going for a reset factory or flashing the phone with custom rom, is there anything else I can try to solve the problem ?
problem still not fixed : looking for a replacement microphone. Anyone know how to replace the part ? If defective and I dreamt that it was working with factory reset, I will replace it.
Found this piece, but don't know where it can fit ? Do I have to solder it on the mainboard ???
Ok update :
1- the microphone part sold in the link is not correct, I don't think it fits.
2- I teared up the phone, to find some little "pearl" blocking the microphone ... after removing the pearl, microphone works flawlessly.