How can i recover my mobile?
when i was trying to flash custom kernel my phone ace s5830i get bricked and then I flash stock rom
but mobile loops samsung animation again and again,
then i tried it with .pit file but no effect i also tried Bootloader file but no effect,
got following messege
E:failed to mount /data (invalid argument)
E:copy_log_files_to_data: can't mount /data
Rebooting...
I am not able to go in recovery mode but can able go in download mode
and bootloop continue please help me thanks in advance
Tick repartition and choose pit file and restore firmware via Odin 3.07
Thanks
iamareebjamal said:
Tick repartition and choose pit file and restore firmware via Odin 3.07
Click to expand...
Click to collapse
actuaaly i have done that also
but then i used other CSC file GT-S5830i-MULTI-CSC-OXEKK4_RST.tar.md5
instead of CSC_S5830i_ODDLF1.tar.md5
and bootloader file- BOOT_S5830iXXLB1_REV00.tar.md5
PDA - PDA_S5830i_XXLF3.tar.md5
PHONE - MODEM_S5830i_DDLF1.tar.md5
and no pit file
and problem is solved only language is different so i changed in language setting
Anyway thanks for your fast reply you are real hero in android hats of to you .:good:
please help
ckbhawsar said:
actuaaly i have done that also
but then i used other CSC file GT-S5830i-MULTI-CSC-OXEKK4_RST.tar.md5
instead of CSC_S5830i_ODDLF1.tar.md5
and bootloader file- BOOT_S5830iXXLB1_REV00.tar.md5
PDA - PDA_S5830i_XXLF3.tar.md5
PHONE - MODEM_S5830i_DDLF1.tar.md5
and no pit file
and problem is solved only language is different so i changed in language setting
Anyway thanks for your fast reply you are real hero in android hats of to you .:good:
Click to expand...
Click to collapse
but i am not able to go in recovery mode hence i cant do anything but my phone is working perfectly please tell me what to do to go in recovery mode
ckbhawsar said:
but i am not able to go in recovery mode hence i cant do anything but my phone is working perfectly please tell me what to do to go in recovery mode
Click to expand...
Click to collapse
are u sure u used correct key combination ??
recovery mode: home + vol up + power
press it till the first splash screen (samsung galaxy ace gt-s5830i screen) dissapears..
download mode: vol up + vol down + power
Sent from my GT-S5830i using xda app-developers app
Related
Hey Guys,
I triied to flash my Pantech burst via ROM Manager with CWM 6.0.1.5 and it resulted into Bricking my beloved Device:crying: i tried to Restore my Backup(that i took earlier) bt didnt worked device just shows Pantech Logo and after sometime screen go off, then i tried to Upgrade it again with Pantech OS upgrade Tool, It upgrades successfully but doesnot boot up again i tried several time by putting it in S/W Upgrade mode....nothing happened
plz guys help me out how can i get my phone work again....i dnt have warranty as i'm from India.....and cant afford a new Phone too....is there anyway to recover or i'm screwed....plz guys will be very thankful:crying::crying::crying:
Anyone?
coolamjadkhan said:
Anyone?
Click to expand...
Click to collapse
Did you fix this yet?
http://rootzwiki.com/topic/33145-root-cwm-pantech-burst/
scroll down a ways and there is a method for restoring stock rom with cwm
Alternative method for stock JUUS03122012 and Recovery:
1-Download PANTECH_PRESTO_BIN_JUUS03122012.pdl
2-Download P9070_Download_Tool_v3.3.zip and extract it
3-Boot phone into Emergency Download Mode - With device off, press and hold power + Volume Up + Volume Down
4-Execute P9070_Download.exe
5-Select “Open File” and select the PANTECH_PRESTO_BIN_JUUS03122012.pdl file
6-Select “Reload File”
7-Select Download
8-Just select the default location for the XML log file
*I had to do this twice as it failed the first time and the second time it was successful
IAmTheDarkOne said:
Did you fix this yet?
http://rootzwiki.com/topic/33145-root-cwm-pantech-burst/
scroll down a ways and there is a method for restoring stock rom with cwm
Alternative method for stock JUUS03122012 and Recovery:
1-Download PANTECH_PRESTO_BIN_JUUS03122012.pdl
2-Download P9070_Download_Tool_v3.3.zip and extract it
3-Boot phone into Emergency Download Mode - With device off, press and hold power + Volume Up + Volume Down
4-Execute P9070_Download.exe
5-Select “Open File” and select the PANTECH_PRESTO_BIN_JUUS03122012.pdl file
6-Select “Reload File”
7-Select Download
8-Just select the default location for the XML log file
*I had to do this twice as it failed the first time and the second time it was successful
Click to expand...
Click to collapse
I tried this and it stucks in S/W Upgrading mode....
can u plz explain in detail how u got this working.
Unfortunately and I guess also fortunately I haven't had to do this on my phone yet. Is fast boot entirely inaccessible as well?
Sent from my PantechP9070 using xda premium
Hi I updated my mobile during update the power goes out from home is no longer my mobile work anymore and this message appears: (what should I do?
http://i.imgur.com/OwgI6.jpg
ahmedsaber20005 said:
Hi I updated my mobile during update the power goes out from home is no longer my mobile work anymore and this message appears: (what should I do?
http://i.imgur.com/OwgI6.jpg
Click to expand...
Click to collapse
Install Kies and across the top, find the tools bar and it will bring a dropdown menu, just select emergency firmware recovery or something like that. Alternatively you can boot into download mode and flash the firmware via odin. If you don't know what that is, stick with the kies method
UltimateAnas said:
Install Kies and across the top, find the tools bar and it will bring a dropdown menu, just select emergency firmware recovery or something like that. Alternatively you can boot into download mode and flash the firmware via odin. If you don't know what that is, stick with the kies method
Click to expand...
Click to collapse
Thanks for your help I am going to try this:laugh:
I can't enter download mode
Kiss say i9100g not supported . Odin can't see my device. I can't enter download mode or recover mode . I have USB jig but nothing is do if I put it in my phone . what I can do ?
ahmedsaber20005 said:
Kiss say i9100g not supported . Odin can't see my device. I can't enter download mode or recover mode . I have USB jig but nothing is do if I put it in my phone . what I can do ?
Click to expand...
Click to collapse
Congratulations, it's a brick!
Take the phone to a service center, let them try to JTAG it. It it won't work, they'd have to replace the main board.
Sent from my digital submersible hovercraft.
f-r said:
Congratulations, it's a brick!
Take the phone to a service center, let them try to JTAG it. It it won't work, they'd have to replace the main board.
Sent from my digital submersible hovercraft.
Click to expand...
Click to collapse
any way i can do without service center ??
If I had a backup copy of the Software Galaxy S 2 from another mobile phone and was found as a copy Recovery in Samsung Kies program you can use in Dead device and works well?
ahmedsaber20005 said:
Kiss say i9100g not supported . Odin can't see my device. I can't enter download mode or recover mode . I have USB jig but nothing is do if I put it in my phone . what I can do ?
Click to expand...
Click to collapse
If you are unable to get into recovery or d/l mode, it's a brick for sure.
Only JTAG or main board replacement will fix it
Sent from my digital submersible hovercraft.
ahmedsaber20005 said:
if i had a backup copy of the software galaxy s 2 from another mobile phone and was found as a copy recovery in samsung kies program you can use in dead device and works well?
Click to expand...
Click to collapse
can u help me..upload this backup for me..im realy need that..please...
Mr_marumalu said:
can u help me..upload this backup for me..im realy need that..please...
Click to expand...
Click to collapse
Dude had the same issue on my galaxy S2 and resolved it. You dont need the backup. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
The stock ROM from sammobile. (http://www.sammobile.com/firmwares/3/?download=13292)
The JB Bootloader. (I downloaded the stock by Ryuinferno)
The stock JB kernel.
Opened odin v1.85.
Then i used the vol down+home+lock keys together to try to open the download mode ( but ended up in the "Firmware error " page) and connected phone to the pc. It shows "Added!" in the message box.
Repartition with the .pit and it will reboot.
Disconnect
Get into download mode and install the bootloader and it should reboot when done. Disconnect.
Get into download mode and connect
Installed the kernel through odin and reboot
Download mode again and install the ROM through odin.
If the phone gets stuck in boot loop (samsung logo over and over),
get into recovery mode ( for s2, vol up+home+lock, it needs to be pressed intermittently)
Then do a full format along with wipe cache.
And then the phone finally booted completely. :laugh: . Good Luck.
Note: I'm not sure to boot into recovery and download are the same key combos as it was for the i9100g.
tried but i died
=======================================================================
=======================================================================
=======================================================================
=======================================================================
tried repartition says failed have same issue dang!
any tool that forces a flash or repartition?
novjean said:
Dude had the same issue on my galaxy S2 and resolved it. You dont need the backup.
Click to expand...
Click to collapse
Thanks, mate! You're a god. Damn, I nearly started to cry when I realized that my phone was hardbricked.
But now it works again
THANKS!
Hi,
I played inside the system files of my rooted SGA S5830i and accidently deleted a log file, I am sorry I don't remember the name. Now, I see an error message always when I open contacts - android.process.acore has stopped working. Same is the case when I open messages - and it takes me to HomeScreen. I tried downloading a lot of Gingerbread OS version .tar files for my model and nothin works through ODIN as well as through Recovery Mode.
Odin says 'connecting' but no luck. Tried different versions of ODIN, removed SD, removed SIM, removed battery and tried aagin and such, but nothing woked yet.Even tried different USB hubs.
Recovery mode just abort the installation of OS Zip file
So I am planning to root another SGA S5830i of my friend, take a back-up of OS and install it to my SGA. I don't think it will work as it never worked through any of the above mentioned methods to flash a ROM.
Can somebody help me in this matter, please ?
First of all, you have to read the RULES!
There is a separate section for questions and trouble shooting. POST IN CORRECT SECTION!
Install proper Samsung drivers. Make sure that odin detects port of the device.
Odin v. 3.07 supports firmware files without splitting. Other versions needs splitted firmware. Use splitfus to do that.
Flash custom roms via clockworkmod recovery.
Sent from my GT-S5830i using xda app-developers app
I tried with all versions of ODIN, but of no use.
Now when I tried through Recovery Mode, the error message says ' Thereis no enough space on the device '
Please Help !
If you want install ROM for your ace"i" you must buut your phone into download mode(not recovery mode/CWM) than install ROM with ODIN .
May I know the difference b/w Recovery Mode & Download Mode ?
What I understans from Recovery Mode is to Press Volume Up button + Home Screen button + Powen On button simultaneously.
Is that different from Download Mode ?
Please explain
Arus Chandran said:
May I know the difference b/w Recovery Mode & Download Mode ?
What I understans from Recovery Mode is to Press Volume Up button + Home Screen button + Powen On button simultaneously.
Is that different from Download Mode ?
Please explain
Click to expand...
Click to collapse
recovery mode : home button + power + vol up
download mode : power + vol up + vol down
to flash firmware thrugh odin,
boot into download mode..
to flash custom rom or to restore backup or to flash flashable zip boot into recovery mode..
Sent from my GT-S5830i using xda app-developers app
Good advice
srt99 said:
recovery mode : home button + power + vol up
download mode : power + vol up + vol down
to flash firmware thrugh odin,
boot into download mode..
to flash custom rom or to restore backup or to flash flashable zip boot into recovery mode..
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Some good advice on this problem from members but its a shame about the lack of responce from the member who had the problem I personaly would like to hear how things went, was the problem fixed after the advice was given
samsung gt-s5830i
hi im nikil
i have installed hyperion zip of galaxy y in galxay ace
it doesnt shows any download mode or recover mode
so pls help me to how to change rom without download mode
plssssssssssssssss
Hello,
after rooting my S2, it is not booting anymore. After the i9100 logo the screen stays black. I did everythin from the description.here with Samsung Quick Root: http://forum.xda-developers.com/gal...t-app-updated-13-09-12-samsung-quick-t1125414
Do I have the wrong Kernel? If yes, were can I get the correct Kernel?
See Attachement.
[Edit]
I found following working kernel: Siyah-s2-v6.0b4-CWM.zip
you should have rooted using the odin method as it the most safest and noob-proof method .. try booting it in the recovery mode /download mode .. if you boot into recovery mode , wipe data and caceh and try rebooting system .. if not booting in the recovery mode , try download mode and if you do boot into it , flash stock via odin .. .. also , before trying these steps , try holding volume up and power button .. you might as well boot up ..
imp .. recovery : volume up + home + power button
download mode : vlume down +home + power button
all the best and hope i helped .. visit http://www.gokhanmoral.com/?cat=5 for more info on rooting ... download the .tar file attach .. select it in pda and flash via odin while phone i download mode .. hope i helped and all the best .. Happy Flashing
heinz300 said:
Hello,
after rooting my S2, it is not booting anymore. After the i9100 logo the screen stays black. I did everythin from the description.here with Samsung Quick Root: http://forum.xda-developers.com/gal...t-app-updated-13-09-12-samsung-quick-t1125414
Do I have the wrong Kernel? If yes, were can I get the correct Kernel?
See Attachement.
[Edit]
I found following working kernel: Siyah-s2-v6.0b4-CWM.zip
Click to expand...
Click to collapse
Ok, do you have stock rom? If that try flashing it again from dowload and installing apolo kernel, i use it its perfect, no lag boot in 8s...
Sent from my TF101 using XDA Premium 4 mobile app
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
shijopj2012 said:
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
Click to expand...
Click to collapse
I had a similar issue(more than once) and in my case I split the myFirmware file into it's 3 individual parts using Cygwin and SplitFUS2 and flashed from that with Odin 1.85. You could do this with FW file S5830IJPLK1_S5830IOJPLI1_XSG. I also used the pit file(cooperve_0623.pit), but I'm not sure if it was required but point is, it worked.
I also got out of trouble with the use of a backup which although not solid did get me out of trouble. The backup would not restore so I loaded ClockWorkMod recovery and in advanced restore, restored the system folder from my backup, this worked and got me into the phone. However you may not have a backup.
shijopj2012 said:
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
Click to expand...
Click to collapse
try using odin v1.85 and after flashing completes wipe the data and the cache using stock recovery and reboot
HOPE IT HELPS!
[email protected] said:
try using odin v1.85 and after flashing completes wipe the data and the cache using stock recovery and reboot
HOPE IT HELPS!
Click to expand...
Click to collapse
I tried with Odin 1.85 and it also shows failed. please see the attached screen shot.
thanks,
SHIJO
shijopj2012 said:
I tried with Odin 1.85 and it also shows failed. please see the attached screen shot.
thanks,
SHIJO
Click to expand...
Click to collapse
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Go to this link and download stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Go to this link and download stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot for the reply.. I will try it today and tell you the result.. Appreciates
regads,
shijopj2012 said:
Thanks a lot for the reply.. I will try it today and tell you the result.. Appreciates
regads,
Click to expand...
Click to collapse
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
shijopj2012 said:
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
Click to expand...
Click to collapse
Do a "Wipe data/ factory reset" from the stock recovery mod and reboot. That should solve it. Hope I Helped
shijopj2012 said:
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
Click to expand...
Click to collapse
Wipe data and cache from stock recovery and then reflash your device with odin
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Click to expand...
Click to collapse
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
Flash s5830i cwm.
Go to this link for cwm.
And then clear data cach and dalvik cache..and flash any stock based custom rom..
http://forum.xda-developers.com/showthread.php?t=1552792
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Wipe data and cache from stock recovery and then reflash your device with odin
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
I have done it but still this issue of booting up persists. What do you think? Is it a hardware related issue or still I can make it live with some flashing techs....
thanks
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
If this solution doesn't work, then your only solution is USB Jig.
shijopj2012 said:
I have done it but still this issue of booting up persists. What do you think? Is it a hardware related issue or still I can make it live with some flashing techs....
thanks
Click to expand...
Click to collapse
It is not hardware related..just flash stock rom and this time check partition in odin..and this time i think your device boot problem is solve..just flash
Sent from my GT-S5830i using Tapatalk 2
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
First. u should download CMW for s5830i ,.copy it to your sd card.Then download a custom rom and flash it..
If u had made a backup before doing this u can restore it.In my case i restore it .if u encounter any error again inform me
amolgosavi said:
It is not hardware related..just flash stock rom and this time check partition in odin..and this time i think your device boot problem is solve..just flash
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Dear friend,
I have tried all the ways as you explained still the phone after power on SAMSUNG dispaly will come and then animation. Keep on repeating the same and never come the display to home. Is there anything else I can do to make live.... pelase
thank you!
shijopj2012 said:
Dear friend,
I have tried all the ways as you explained still the phone after power on SAMSUNG dispaly will come and then animation. Keep on repeating the same and never come the display to home. Is there anything else I can do to make live.... pelase
thank you!
Click to expand...
Click to collapse
Whenever I flash back my stock rom using odin on my Galaxy Ace, it gives me a bootloop just like yours. The simple solution for this is go to recovery mod and do a "Wipe data/ factory reset". That's it now reboot. It should work fine. Please try this. Hope I Helped
use Odin3 v1.84 for Samsung Galaxy Ace-i instead
Its working........great.........
If u want to flash then use "Odin3.v3.07.Cooperve" and also put "cooperve_0623.pit" in pit tab...........
why odin3 v3.07 can't detect my phone, my phone displays odin mode and at the bottom donloading do not turn off target, nothing happens..