Running latest viper rom and arc reactor kernel. I tried hdmi out for the first time tonight and everything mirrors and works likes it's supposed to but when I play a video it and the sound are literally in half speed or slower. Not sure what's going on here so I tried by starting a video recording I had and plugging the phone into the MHL adapter and it instantly starting mirroring but in slow motion. Produces same results trying to stream from youtube as well. Only happens when plugged in for hdmi out.
Anything I'm missing?
talroot said:
Running latest viper rom and arc reactor kernel. I tried hdmi out for the first time tonight and everything mirrors and works likes it's supposed to but when I play a video it and the sound are literally in half speed or slower. Not sure what's going on here so I tried by starting a video recording I had and plugging the phone into the MHL adapter and it instantly starting mirroring but in slow motion. Produces same results trying to stream from youtube as well. Only happens when plugged in for hdmi out.
Anything I'm missing?
Click to expand...
Click to collapse
I have the same issue, found this doing a search right before I posted the same question. At least I'm not alone, hopefully there's a fix.
Have u guys tried a different kernel
Sent from my EVO using xda app-developers app
I haven't yet, I just posted a question in the Arc thread to see what the Dev says.
Well viper has more of an emphasis on customization not power try a different Rom if anything I would asume cm should be able to handle it
Sent from my EVO using xda premium
12gage said:
I haven't yet, I just posted a question in the Arc thread to see what the Dev says.
Click to expand...
Click to collapse
I couldn't find your post or a response to this issue. Personally, I haven't had time to try another kernel but I might this weekend.
Have switched out kernels yet?
talroot said:
I couldn't find your post or a response to this issue. Personally, I haven't had time to try another kernel but I might this weekend.
Have switched out kernels yet?
Click to expand...
Click to collapse
I did try Bulletproof and Elementrax and the problem went away, however those kernels weren't as stable on my device. I contacted the dev of Arc and he's trying to figure it out. Hopefully a fix will come soon
Related
Because we can still boot into WebOS. I started thinking about all the folks complaining about what doesn't work on their Touchpad, and thought about someone who comes to the forums and might be afraid to flash because they'll lose the camera, or youtubeHD, or HuluPlus and just thought I'd remind folks that rebooting into WebOS is easier than some of the crazy work arounds people are trying. It's actually pretty amazing to be able to do what we do. Most phones that get an Alpha ROM with lots of bugs, have to deal with all of it......we can just boot back into WebOS and all is well.........so, Play with CM9, enjoy some apps and games, and the fun that it is, then boot into WebOS and watch a movie, or skype with your mom.........it's a GREAT friggen tablet!
So what doesn't work in CM9? I put CM7 on my tablet yesterday and the wifi not working and failing to connect all the time is driving me nuts. Almost to the point where I might just sell this thing.
Don't be foolish. There are threads 'aplenty dealing with and solving the wifi issue. Typically, it is caused by other routers near you using the same channel and changing your routers channel will solve the problem.
But if you are really so ticked off you want to sell, how much are you asking and is it a 32 or 16gb?
digiblur said:
So what doesn't work in CM9? I put CM7 on my tablet yesterday and the wifi not working and failing to connect all the time is driving me nuts. Almost to the point where I might just sell this thing.
Click to expand...
Click to collapse
Lower the channel on your wifi router. Not sure what the bug is but that fixed it for me. (Iirc I had 11 or something, now 4 - works fine)
digiblur said:
So what doesn't work in CM9? I put CM7 on my tablet yesterday and the wifi not working and failing to connect all the time is driving me nuts. Almost to the point where I might just sell this thing.
Click to expand...
Click to collapse
hd video is pretty much the only issue i ever have.
for me its skype. It's great to be able to boot to WebOS to video chat, but the WebOS skype program doesn't do landscape for some reason, only portrait - which is exceedingly dumb since the official case stands the touchpad up in LANDSCAPE
/rant
pbassjunk said:
Lower the channel on your wifi router. Not sure what the bug is but that fixed it for me. (Iirc I had 11 or something, now 4 - works fine)
Click to expand...
Click to collapse
That only works if you can access the router. Kinda hard to do that at other businesses.
Will have to give CM9 a shot and see if it is any better.
digiblur said:
So what doesn't work in CM9? I put CM7 on my tablet yesterday and the wifi not working and failing to connect all the time is driving me nuts. Almost to the point where I might just sell this thing.
Click to expand...
Click to collapse
You could try this
http://forum.xda-developers.com/showthread.php?t=1461627
colin_404 said:
You could try this
http://forum.xda-developers.com/showthread.php?t=1461627
Click to expand...
Click to collapse
Tried that...I spend more time trying to fix the WiFi connection than I get to use the device. I think I have read ever WiFi thread in this forum.
hockey4life0099 said:
hd video is pretty much the only issue i ever have.
Click to expand...
Click to collapse
same here. Hardware acceleration is really the only thing I ever miss in the ics alpha. Despite this it is my daily and my laptop is gathering dust in the corner.
So which Rom do I install for cm9. On cm7 now. Can i backup cm7 with cwm like I do on Epic and restore it later?
What's everyone getting all riled up for? The original thread said nothing specifically about wifi, and just stated about how nice it is to have a dual boot system. And what doesn't work in android does in WebOS. Why all the negative ninnies here ?
digiblur said:
So which Rom do I install for cm9. On cm7 now. Can i backup cm7 with cwm like I do on Epic and restore it later?
Click to expand...
Click to collapse
The one with the highest number-and yes, you can restore from clockwork mod
Sent from my touchpad via tapatalk
digthemlows said:
Because we can still boot into WebOS. I started thinking about all the folks complaining about what doesn't work on their Touchpad, and thought about someone who comes to the forums and might be afraid to flash because they'll lose the camera, or youtubeHD, or HuluPlus and just thought I'd remind folks that rebooting into WebOS is easier than some of the crazy work arounds people are trying. It's actually pretty amazing to be able to do what we do. Most phones that get an Alpha ROM with lots of bugs, have to deal with all of it......we can just boot back into WebOS and all is well.........so, Play with CM9, enjoy some apps and games, and the fun that it is, then boot into WebOS and watch a movie, or skype with your mom.........it's a GREAT friggen tablet!
Click to expand...
Click to collapse
I guess I don't understand the title. Cm9 everything works.
Netflix doesn't work. But at least change the title to represent this subject right. Maybe choose: between cm9 AND webOS, everything works (except netflix)
Just a thought. Ur title lures people in thinking that cm9 updated so everything works. And that isn't the case at all.
Just a friendly reminder.
Sent from my PG86100 using Tapatalk
danknee said:
same here. Hardware acceleration is really the only thing I ever miss in the ics alpha. Despite this it is my daily and my laptop is gathering dust in the corner.
Click to expand...
Click to collapse
hardware acceleration works since alpha 0. Hardware decoding hasn't worked so far. you can turn off hardware acceleration in browser to see the difference. don't be disappointed, this is the fastest we can get.
Sent from my SGH-T959 using XDA Premium App
leftovermagic said:
The one with the highest number-and yes, you can restore from clockwork mod
Sent from my touchpad via tapatalk
Click to expand...
Click to collapse
Thanks. New to this tablet thing I read somewhere saying not to do certain things in CWM as it will mess up the tablet.
cellneuron said:
hardware acceleration works since alpha 0. Hardware decoding hasn't worked so far. you can turn off hardware acceleration in browser to see the difference. don't be disappoinmted, this is the fastest we can get.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
I read this on Dalingin's Twitter. I guess I meant video codecs. The performance is great, I just want Netflix and HD Youtube.
Put on the alpha 0.6 after wiping with CWM. Works great. Wifi connects with no issues unlike CM7.
I keep seeing posts about HD video playing for Youtube and Hulu not working. I assume if I copied a bunch of HD movies onto it for travel they will have issues and general video playing would suck up battery life. Is hardware decoding in the works? Does CM7 suffer the same issue?
As far as video playback goes, I've been using arc media tab player. Using the regular. Avi files with very little problems. Its been great while on vacation and on the long flight.
is it me or is it really sensitive on the rezound? I would have to quickly swipe for it to kick in on the inc2, but on the rez a single swipe sometimes kicks the animation on. Wonder if its removable on a rom. This and getting mhl/hdmi mirror to work is the only thing irking me. Other than that, this phone is bad @ss.
I also can't get mhl to mirror the phone on any rom. I can view a video or image but the screen is blank on the home screens. anyone else?
As far as Mhl/hdmi goes mine works fine. I tried a few roms with no problems. This is the first phone I've used one with. As long as I have it plugged in with a power source it works.
Sent from my ADR6425LVW using XDA App
base0x02 said:
As far as Mhl/hdmi goes mine works fine. I tried a few roms with no problems. This is the first phone I've used one with. As long as I have it plugged in with a power source it works.
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
are you on a rom or stock? I read somewhere that the issue could be ICS roms (which I'm on) but maybe stock or GB roms mirror hdmi.
edit: i guess its an ics issue. I switched to nils gb rom and mirrors fine. I tried two ics roms and both do not mirror. You can play a video or image and it will display.
Hi all, i havent bit the bullet yet with this rooting game as the atrix as been plenty fast enough for me box standard, but since getting the lapdock and finding it so painfully slow that I wont use it, I started googling my options, so here i am as it seems that rooting is the answer!
Ive been reading about Jellybean and it sounds like its been designed to work with accessories like the lapdock, that lead me to read the thread about the CM10 rom that epinter is building which sounds brilliant.
I cant ask the Q on that thread because im a noob so can someone tell me if epinters cm10 works with the lapdock or would i need to add things.
thanks
Joe
Epinter's CM10 work with lapdock, but just simple HDMI output, the webtop app isn't work.
only portraite mod
rumcajsz said:
Epinter's CM10 work with lapdock, but just simple HDMI output, the webtop app isn't work.
Click to expand...
Click to collapse
yes and hdmi output doesn t work landspece mod or i didn t find yet
Thanks for the replies guys but just to clarify, your both saying -
The lapdock works?
Well of course it works, however much like CM9 it's only going to mirror the video output from the phone right now. However the auto tablet switch is still broken (from what it sounds like, I'm not on CM10 yet.) and Moto's WebTop is obviously still broken as well.
Personally I'm waiting for a version of Paranoid Android based on CM10. Maybe when that hits I can finally switch modes without having to reboot.
Scary Guy said:
it's only going to mirror the video output from the phone right now.
Click to expand...
Click to collapse
I think i could live with that as the browser on the lapdock is only useable if i use it through the phone rather than its own firefox.
So i would just be losing out on screen resolution.
Does JB still have the bug where on the lapdock you get 10 FPS and on the phone its nice and smooth?
Actually I'm getting decent FPS with Paranoid Android. It's still not great but it's WAY better than it was. The start screen for Need for Speed: Shift and it's pretty good. Galaxy on Fire 2 THD works like I expect it to as well. My guess is that it's been fixed in Joker's latest CM9's and yeah CM10 as well.
I doubt it will be perfect until Moto releases ICS officially though (and hopefully they can use something out of that to help with CM10 too).
do the cm 9 ports have hdmi output
back2msg said:
do the cm 9 ports have hdmi output
Click to expand...
Click to collapse
I doubt my lapdock would work if they didn't. Also I've tried the cable with a DVI adapter and that works fine, so yeah.
If you meant CM10, I have no clue yet but I'm getting tired of waiting for a CM10 based parandroid (which is what I'm going to call it for short from now on, because I think it's clever).
I've flashed cm10 and will give my lapdock a try when its charged. The is some mention of changes today but I haven't read the change log.
Sent from my MB860 using xda premium
I just flashed it, didn't even bother with the new gapps yet though. Came over from Parandorid 1.6 and all I did was wiped the caches.
So far no issues but I absolutely HATE the app picker. It was much easier with ICS where you picked it and checked always use if you wanted to. Now you have to pick it and select either just once or always (so two taps instead of one).
Loud sound lapdock
On [ROM] CM10 (JellyBean) for Atrix - 20120729 very loud lapdock sound in mirror mode. What I can do on it?
What do you mean loud? It functions normally for me. Maybe turn down the volume? Sorry you're going to need to be more specific as to what the problem is.
Scary Guy said:
What do you mean loud? It functions normally for me. Maybe turn down the volume? Sorry you're going to need to be more specific as to what the problem is.
Click to expand...
Click to collapse
Very loud minimum volume (level 1).
I tried with both the phone speaker and the stereo system I plug it into and I could not replicate the issue on my end, sorry.
You did check all the volume levels right?
Posting a logcat might help someone. I'd mention the issue in the main thread.
Scary Guy said:
I just flashed it, didn't even bother with the new gapps yet though. Came over from Parandorid 1.6 and all I did was wiped the caches.
So far no issues but I absolutely HATE the app picker. It was much easier with ICS where you picked it and checked always use if you wanted to. Now you have to pick it and select either just once or always (so two taps instead of one).
Click to expand...
Click to collapse
So just to make it clear. You dont have webtop with the flashed rom?
Is there an ICS ROM with working webtop yet?
I only use the Atrix with the lapdock in GB. Is there an ICS ROM with proper support or do I have to wait for the official ICS?
NO ONE has webtop with JB, let alone ICS. If they do they're *******s for hiding it from the rest of us.
The devs are working on it. Official ICS *SHOULD* bring it when it hits (if it hits, which I'm sure it's going to it's just taking forever).
What I'd really like to see is companies release all the source code for their "dead" devices. But it will probably be a cold day on Mercury when that happens.
I don't even have a webtop like interface either, nor will I until paranoid android comes out with a modified CM10 of their own. My hope is then that I can switch DPI without having to reboot.
Scary Guy said:
NO ONE has webtop with GB, let alone ICS. If they do they're *******s for hiding it from the rest of us.
The devs are working on it. Official ICS *SHOULD* bring it when it hits (if it hits, which I'm sure it's going to it's just taking forever).
What I'd really like to see is companies release all the source code for their "dead" devices. But it will probably be a cold day on Mercury when that happens.
I don't even have a webtop like interface either, nor will I until paranoid android comes out with a modified CM10 of their own. My hope is then that I can switch DPI without having to reboot.
Click to expand...
Click to collapse
So I'll just stick with 2.3.4 stock, my lapdock working and wait patiently for ICS.
Mythozz said:
So I'll just stick with 2.3.4 stock, my lapdock working and wait patiently for ICS.
Click to expand...
Click to collapse
so your phone isnt rooted and your lapdock works ok?
Hello. I'm relatively new to the Cyanogenmod scene in general, so forgive me if I'm a bit ignorant. I looked through the official CM10.1 threads and didn't see much in the way of actually fixing MHL/HDMI not working. I think I read that the last snapshot that had MHL working was back in February or so, but I don't remember exactly.
I'm currently running cm-10.1-20130304-EXPERIMENTAL-jewel-M2 and have no MHL/HDMI at all. The phone doesn't seem to notice I've plugged in the adapter (except for it notices it's being charged, since the adapter is connected to an AC adapter).
Could someone inform me if there's been developments to fix this issue? Any insight is appreciated!
I had the same issue with my before car wrecked EVO LTE. I ran CM and many sense roms before basically giving up on it. Went through 2 cheap eBay adapters that worked for a bit then stopped altogether. Then the mhl/hdmi wouldn't work at all, not on any adapter or tv.
I asked a lot of other users if they had the same issue, even tried to pay a dev to look into it and was basically told it was a hardware issue.
My solution was to usb phone to Xbox for movies and use bluestacks on my pc for games/apps. Haven't yet tried my replacement EVO LTE. My original was a pre-order held up @ customs, so maybe it was faulty workmanship just bc it was new.
Hope u come up w a solution.
RudyH246 said:
Hello. I'm relatively new to the Cyanogenmod scene in general, so forgive me if I'm a bit ignorant. I looked through the official CM10.1 threads and didn't see much in the way of actually fixing MHL/HDMI not working. I think I read that the last snapshot that had MHL working was back in February or so, but I don't remember exactly.
I'm currently running cm-10.1-20130304-EXPERIMENTAL-jewel-M2 and have no MHL/HDMI at all. The phone doesn't seem to notice I've plugged in the adapter (except for it notices it's being charged, since the adapter is connected to an AC adapter).
Could someone inform me if there's been developments to fix this issue? Any insight is appreciated!
Click to expand...
Click to collapse
Mine works fine on aosp or sense roms, is a rocket fish mhl adapter, try to flash komodo kernel which I think it supports tv out, that's what I'm using with cm 10.1
Sent from my EVO using xda app-developers app
jocarog said:
Mine works fine on aosp or sense roms, is a rocket fish mhl adapter, try to flash komodo kernel which I think it supports tv out, that's what I'm using with cm 10.1
Click to expand...
Click to collapse
Are there any large differences between running CM10.1's stock kernel and Komodo Kernel? I am not entirely sure what exactly different kernels entail.
Yes with Komodo you can use swipe gestures to wake your phone or put it to sleep, also lover/increase the volume and advance power menu, etc, plus you can overclock and increase zram, etc etc etc... make a nand and flash komodo... good luck!
RudyH246 said:
Are there any large differences between running CM10.1's stock kernel and Komodo Kernel? I am not entirely sure what exactly different kernels entail.
Click to expand...
Click to collapse
Here's a good reading about kernels and schedulers:
http://forum.xda-developers.com/showthread.php?t=1369817
jocarog said:
Here's a good reading about kernels and schedulers:
http://forum.xda-developers.com/showthread.php?t=1369817
Click to expand...
Click to collapse
Thanks a bunch! I'll give it a read.
Hello guys, I'm new.
I have decided to reuse my old Note 1 as a video surveillance device to output to a monitor using TinyCam Pro.
I already flashed this with the latest Quincyatt and got it all working great, EXCEPT that MHL does not work on this build it seems.
From what I can gather from reading the forums so far, only ROMs based on STOCK have MHL working?
If this is the case, can anyone recommend me the leanest, most battery optimized ROM that has MHL working and which I can have Play Store enabled to download and get TinyCam Pro working?
Thanks a million.
~Peter
PeterHJS said:
Hello guys, I'm new.
I have decided to reuse my old Note 1 as a video surveillance device to output to a monitor using TinyCam Pro.
I already flashed this with the latest Quincyatt and got it all working great, EXCEPT that MHL does not work on this build it seems.
From what I can gather from reading the forums so far, only ROMs based on STOCK have MHL working?
If this is the case, can anyone recommend me the leanest, most battery optimized ROM that has MHL working and which I can have Play Store enabled to download and get TinyCam Pro working?
Thanks a million.
~Peter
Click to expand...
Click to collapse
If you are only using MHL then I would probably go back to a lite gingerbread (Saurom) or ice cream sandwich (Only One Goldie) rather then Jelly Bean (Custom Canadian or Blackstar Blackjelly). Also my mhl adapter has pass through charging which you will likely need anyway so battery life isn't a big deal.
Sent from my SAMSUNG-SGH-I717
developweb said:
If you are only using MHL then I would probably go back to a lite gingerbread (Saurom) or ice cream sandwich (Only One Goldie) rather then Jelly Bean (Custom Canadian or Blackstar Blackjelly). Also my mhl adapter has pass through charging which you will likely need anyway so battery life isn't a big deal.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Hey there, appreciate the information on which builds to try.
I'll try them out and see where it leads.
Wish they could figure out how to enable MHL on the Quincyatt build, that would have been perfect.
thanks,
~Peter
PeterHJS said:
Hey there, appreciate the information on which builds to try.
I'll try them out and see where it leads.
Wish they could figure out how to enable MHL on the Quincyatt build, that would have been perfect.
thanks,
~Peter
Click to expand...
Click to collapse
Use the thanks button please.
Which rom specifically were you using? All builds for the i717 are quincyatt. It's the codename for the device.
Sent from my SAMSUNG-SGH-I717
developweb said:
Use the thanks button please.
Which rom specifically were you using? All builds for the i717 are quincyatt. It's the codename for the device.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Hey there, thanks for the tips and yes I clicked on the thanks button
I used the official Candy 5 rom located here: http://forum.xda-developers.com/galaxy-note-att/development/rom-t3040558
Going to try the ones you are suggesting today or tomorrow.
thanks again!
Unfortunately after a bit of searching it looks like the Saurom mod is no longer supported and the official thread's download links do not work.
I also could not find a reference for Goldie except the Beta 5? version which looked dubious after I read toward the end that the developer tried to jack someone else's mod and claim it for himself.
Ah well, I guess I'll try some stock mods and see if that will do.
...
Hey just wanted to say I was successful making MHL and everything else work with CM9 mod stable, Ice Cream Sandwich (ICS) - woot!
Everything is humming along well and now I got a low-power, video surveillance system haha!
Anyways, thanks again for all the help.
~Peter
PeterHJS said:
Hey just wanted to say I was successful making MHL and everything else work with CM9 mod stable, Ice Cream Sandwich (ICS) - woot!
Everything is humming along well and now I got a low-power, video surveillance system haha!
Anyways, thanks again for all the help.
~Peter
Click to expand...
Click to collapse
ok I spoke too soon.
Apparently this one doesn't seem to support the "fast charging" feature and I am running out of battery, albeit slow drainage, when using MHL and charging at the same time.
Need to look for a mod that has the fixed "fast charging" feature for usb.
developweb said:
If you are only using MHL then I would probably go back to a lite gingerbread (Saurom) or ice cream sandwich (Only One Goldie) rather then Jelly Bean (Custom Canadian or Blackstar Blackjelly). Also my mhl adapter has pass through charging which you will likely need anyway so battery life isn't a big deal.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Hey btw, you said you have MHL working on your phone? Which mod are you using and do you have fast charging working as well?
thanks again!
I've been looking scouring the entire forums and can't seem to find a mod that can do both "fast charging" and "mhl" on the note i7i7.
PeterHJS said:
Hey btw, you said you have MHL working on your phone? Which mod are you using and do you have fast charging working as well?
thanks again!
I've been looking scouring the entire forums and can't seem to find a mod that can do both "fast charging" and "mhl" on the note i7i7.
Click to expand...
Click to collapse
Running a stock based rom you don't need any mod. Just an mhl adapter. Just be wary of roms that say they have removed all the Samsung bloat. Mhl apparently needs some of it.
Sent from my SAMSUNG-SGH-I717