Hi
Has anyone else been using the wonderful Acid Audio Engine??
I just flashed the files yesterday on my P765 and have experienced such an enhancement in the audio quality that I would recommend every music lover to give it a try. Its simply great (and easy too). Its the first time I feel it was worth it to have rooted my phone
Give it a try http://forum.xda-developers.com/showthread.php?t=1923630
spatone said:
Hi
Has anyone else been using the wonderful Acid Audio Engine??
I just flashed the files yesterday on my P765 and have experienced such an enhancement in the audio quality that I would recommend every music lover to give it a try. Its simply great (and easy too). Its the first time I feel it was worth it to have rooted my phone
Give it a try http://forum.xda-developers.com/showthread.php?t=1923630
Click to expand...
Click to collapse
I had tried it a month ago completely lost my sound so I restored my backup .Can you tell me how did you it BTW I have a p765 with cm10.1.
Sent from my LG-P760 using Tapatalk 2
mussi96 said:
I had tried it a month ago completely lost my sound so I restored my backup .Can you tell me how did you it BTW I have a p765 with cm10.1.
Sent from my LG-P760 using Tapatalk 2
Click to expand...
Click to collapse
I too am on CM 10.1 RC5.
Followed the steps mentioned in the thread as follows
Originally Posted by ilya404
1.Take nandroid backup
2. Wipe Cache and Dalvik Cache
3.Flash the downloaded file in CWM (First 2802 then 2805 then Clear Audio)
4.Wipe dalvik cache + Cache
5.fix permission in recovery
6.reboot your phone
7. Check buildprop and use terminal emulator to fix it (su[enter] mount -o rw,remount /system[enter] aengine)
8. Reboot
Ilya
Click to expand...
Click to collapse
But being a noob couldn't quite make much of the 7th point so used X-Plore browser to go to aengine file in root>>system>>bin and gave it all the permissions.
Would appreciate if anyone else can share his/her acid engine configuration that gives the best audio quality
For me it works on stock V20D and worked on old CM RC2.
Wysyłane z mojego LG-P760 za pomocą Tapatalk 2
spatone said:
I too am on CM 10.1 RC5.
Followed the steps mentioned in the thread as follows
But being a noob couldn't quite make much of the 7th point so used X-Plore browser to go to aengine file in root>>system>>bin and gave it all the permissions.
Would appreciate if anyone else can share his/her acid engine configuration that gives the best audio quality
Click to expand...
Click to collapse
Thanks btw I know how to use terminal emulator.
Sent from my LG-P760 using xda app-developers app
Tried it on p760 v20c on clean system and didn't worked, it shows me some kinds of error like google talk has stopped working, camera doesn't work and after that i stopped testing it. Sound was same, with power amp.
ionuutzuu said:
Tried it on p760 v20c on clean system and didn't worked, it shows me some kinds of error like google talk has stopped working, camera doesn't work and after that i stopped testing it. Sound was same, with power amp.
Click to expand...
Click to collapse
You must delete any equalizer app
Sent from my LG-P760 using xda app-developers app
mussi96 said:
You must delete any equalizer app
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
I don't have any equalizer app. Running on JB Stock no DPS Manager etc...
Loving the audio quality of this simply wooww!! But I have a issue with it my camera isn't working
Sent from my LG-P760 using xda app-developers app
Simply Awesome!
Related
Today i was boring,so i maked a test with flashing Acid Audio Engine,the result:
It worx great so far.
NOTE:before installing/flashing this mod please read the guide on the thread realy CAREFULLY!!!
There are different versions,not all working on our phone!!!
I have flashed (Universal)AC!DAudioEngine v5+AC!D Noozxoide Addon.
The Sound is very good:good! :good:
Screenies from my Phone
Link------->http://forum.xda-developers.com/showthread.php?t=1923630
Hey did u download the walkman player too ????? And does this require root ???
root required.no walkman currently not it has 30mb and my internet is crappy will download later.
CALIBAN666 said:
root required.no walkman currently not it has 30mb and my internet is crappy will download later.
Click to expand...
Click to collapse
thanks man !!! trying now !!!
Tested!!! Confirmed working.
Bro can I apply all the addons?
CALIBAN666 said:
Today i was boring,so i maked a test with flashing Acid Audio Engine,the result:
It worx great so far.
NOTE:before installing/flashing this mod please read the guide on the thread realy CAREFULLY!!!
There are different versions,not all working on our phone!!!
I have flashed (Universal)AC!DAudioEngine v5+AC!D Noozxoide Addon.
The Sound is very good:good! :good:
Screenies from my Phone
Link------->http://forum.xda-developers.com/showthread.php?t=1923630
Click to expand...
Click to collapse
Bro how did you install it? I followed the instruction but i did not get any new settings.
I tried flashing the walkman player but when i reboot it was not installed..
HELP! I really want this.. THANKS!
read the first post,bro
there can u read u shall read the guide from linked thread realy CAREFULLY
Bro i hv got beats audio preinstalled in my jbv3....whats shuld i do...???shud i remove it before installing this....???
Sent from my GT-S5360 using xda app-developers app
working !!!
Tested .. and working..can feel the diffrence in sound quality.. awesome!!
beats audio/ dsp manager fore closes after installing this.. just freeze it using titanium backup or link2sd
anmolsharma1293 said:
Bro i hv got beats audio preinstalled in my jbv3....whats shuld i do...???shud i remove it before installing this....???
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
no,just flash it,and follow the instruction "carefully" (reminder from Caliban666 )
my volume+ fc after flash.
but forget it and SRS,cause Ac!D gave me more clarity:thumbup::thumbup:
Sent by Schoolar Boy who wanna help and being a devs
Itz working for me on HYPERION
Clarity increased but bass is reduced.....
But walkman not workin.....
I installed acid audio+walkman player
Sent from my GT-S5360 using xda app-developers app
not work
help acid audio not working in my galaxy y (hyperion 7.x)
flasing universal Acid Audio , debilk cache, fix permisions and roboot and not work :'(
help
Sorry for my bad english
k01001 said:
help acid audio not working in my galaxy y (hyperion 7.x)
flasing universal Acid Audio , debilk cache, fix permisions and roboot and not work :'(
help
Sorry for my bad english
Click to expand...
Click to collapse
Mount system, flash universal Acid Audio , wipe dalvik
cache, fix permisions and reboot
anmolsharma1293 said:
Clarity increased but bass is reduced.....
But walkman not workin.....
I installed acid audio+walkman player
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
not working? i've download that 30mb
well,i privately didn't use that...
30mb for system app is riddiculous for me
Sent by Schoolar Boy who wanna help and being a devs
thank u!
Anyway to install Walkman addon??
Any help would be appreciated.
Sent From Y using Internet
the walkman not working on our device
@op thanks for sharing our mod here
all the features of our mod won't work on GB so you can only get those in ics or JB.
GreeTingZ from Team AC!D
Hello Guys,
After lots of trying & failing, I finally succeeded to get the illumination bar working in Stock JB. It now works like ICS and you can use it on all Stock JB ROM without flashing ICS first.
Note 1: I saw that Little Zed had a thread about this but since my method is a bit different than his, I decided to create a new thread. Hope no one's angry
Note 2: After flashing the zip----
SP light effects will be gone.
Illumination Receiver will be gone.
Install Illumination Bar Notification. It will work like ICS.
Initial Boot Led will work
This should solve the "Screen Always On" problem.
Walkman & Album will change color according to selection.
Note 3: If you ever wipe data, you'll need to flash this again.
Instructions
1) Flash via recovery
2) After booting led will be white. Just change theme and led color will work.
ChangeLog
V1:
- fixed bash script
V2:
- fixed end message :silly:
- fixed progressbar glitch.
- added a little sleep time during flashing
- no need to flash if you're using V1
F.A.Q
- if after flashing led doesn't work, then see this post HERE
~~Credits~~
@Little Zed for trying first to get it working
@kontini for explaining the related files
Greatt!!
We dont need to flash ics first??
Will Try and report soon
Edit: Dint work... tried on pipi's v6 rom
And the Screen is always on
Sent from my Xperia U using xda app-developers app
Singham101 said:
Greatt!!
We dont need to flash ics first??
Will Try and report soon
Edit: Dint work... tried on pipi's v6 rom
And the Screen is always on
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
Ok, I'll look into it.
not working
Not working with devswift stock v5. Thanks for the effort anyway
Sent from my ST25i using xda app-developers app
Singham101 said:
Greatt!!
We dont need to flash ics first??
Will Try and report soon
Edit: Dint work... tried on pipi's v6 rom
And the Screen is always on
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
dtalwar14 said:
not working
Click to expand...
Click to collapse
gigacats said:
Not working with devswift stock v5. Thanks for the effort anyway
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
It'll work. After flashing, open terminal emulator and type this
Code:
su
chmod -R 777 /data/lightservice.soc
reboot
After reboot, it should work. Just a temporary walk around. I'll fix it. Please try and report back
NoobCoder said:
It'll work. After flashing, open terminal emulator and type this
Code:
su
chmod -R 777 /data/lightservice.soc
reboot
After reboot, it should work. Please try and report back
Click to expand...
Click to collapse
Yeap, after doing that, the illumination bar started to work again. Finally I can make a clean JB installation. Thanks!!
Update
Updated the link with new fixes. Now you don't need to use terminal emulator. Just flash via cwm and enjoy . And please report back.
Flashed last fix but system is so lagging.. I'm using it on stock JB V5 by devswift1!
I also wiped cache and dalvik cache, using it from 2 hours and it lags
Inviato dal mio ST25i con Tapatalk 4
ale467 said:
Flashed last fix but system is so lagging.. I'm using it on stock JB V5 by devswift1!
I also wiped cache and dalvik cache, using it from 2 hours and it lags
Inviato dal mio ST25i con Tapatalk 4
Click to expand...
Click to collapse
It just contains led files so I don't think it's causing this. Also I uploaded it 1 hr ago, how r u using it last 2 hrs
BTW I'm using v5 also
Sent from my ST25i using Tapatalk 2
There's only one important bug:
You wrote "enoy" instead of "enjoy" in installer script!
No lagging, just like in ICS!
THANKS A MILLION!
You won the race! Congratulations!!
Its just working flawless !!
You did It.. Thank you
Sent from my Xperia U using xda app-developers app
DaniPhii said:
There's only one important bug:
You wrote "enoy" instead of "enjoy" in installer script!
No lagging, just like in ICS!
THANKS A MILLION!
You won the race! Congratulations!!
Click to expand...
Click to collapse
Haha. I was so excited that didn't even check it
So just to confirm, are u experiencing lags?
Sent from my ST25i using Tapatalk 2
OMG SO SLOWWWW
Just kidding, great fix dude, I'm impressed
Just the display brightness is now too dim on V5 with automatic adapting, but manually adjusting the switch seams lot better
Thank you very much for this fix o/
NoobCoder said:
Haha. I was so excited that didn't even check it
So just to confirm, are u experiencing lags?
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Lags only ar first boot
Sent from my ST25i using xda app-developers app
NoobCoder said:
I saw that Little Zed had a thread about this but since my method is a bit different than his, I decided to create a new thread. Hope no one's angry
Click to expand...
Click to collapse
We all should be so thankful, even us who were trying to fix it so assiduously like you!
NoobCoder said:
So just to confirm, are u experiencing lags?
Click to expand...
Click to collapse
NONE, including first boot.
Even working with Illumination Bar Notifier by @rundgong!
HOW DID YOU DO THIS? No, no, don't tell either me or everyone, I just loved your magic…
I'm using an improved-by-me mixture of @DevSwift1's V3 based in 6.2.A.0.400 and others based in 6.2.A.1.100 (from them I mostly included newer apps, so it's mainly 6.2.A.0.400 yet but so stable as newer one). I won't change this primary ROM even if KitKat is released as stable as Jelly Bean for Xperia™ U.
I'd install KK as secondary ROM only.
By the way, cleverly written line:
Code:
delete("/system/app/SemcIlluminationSetting.apk");
You've thought of everyone who might has installed that mod of Xperia™ SP light effects! You don't deserve that name…
EDIT: Oh, you were telling us about it in OP's note 2… I was as enthusiastic as you that I didn't read it before… LOL!
Ok, I'm piping down now. I just didn't know how to thank you, ouch… O[]ò"
WORKING!!!
Yess, it is working! good job !:good:
Works great :laugh: Thanks
Can we add Xperia themes to devswift1 v5 Rom?
By the way zip really worked great!
Sent from my ST25i using xda premium
We are using illumination bar to get color but by flashing we can get real color which is present in jb..btw nice fix
Sent from my ST25i using xda premium
Camera app with time shift for best photo, AR and other things.
I take no credit for this just thought it was with sharing as developer has done great job with the port. All credit to niaboc79, please thank him for his work.
http://forum.xda-developers.com/show....php?t=2511284
Sent from my C5303 using xda app-developers app
Did u try this?
bez_iom said:
Camera app with time shift for best photo, AR and other things.
I take no credit for this just thought it was with sharing as developer has done great job with the port. All credit to niaboc79, please thank him for his work.
http://forum.xda-developers.com/show....php?t=2511284
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
i did last week... force close... anyone success?
Seems to be working fine no fc. Followed op by niaboc79. Mounted system, Cleared data ( factory reset), flashed zip, reboot. Took a while to boot first time, lost app data but not worried about that.
Sent from my C5303 using xda app-developers app
Link is dead.
Seems great but links dead/__\
bez_iom said:
Camera app with time shift for best photo, AR and other things.
I take no credit for this just thought it was with sharing as developer has done great job with the port. All credit to niaboc79, please thank him for his work.
http://forum.xda-developers.com/show....php?t=2511284
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
u have link download super user mod ???
Link: http://forum.xda-developers.com/showthread.php?t=2511284
AR effect showings the animation bro?
Like animation dinosaur?
It comes as a default camera in ExistenZ rom. Also all features are working in that ROM - no force close too.:good:
camera fc.. common camera fc.. before that i press dinasour.. AR fc too... i added the line... help please?
danielhariri said:
camera fc.. common camera fc.. before that i press dinasour.. AR fc too... i added the line... help please?
Click to expand...
Click to collapse
clear data
all camera function
New Link
Try this link,worked ------->>>> http://www.mediafire.com/download/t42xl425qjn2zvb/Honami_Camera_Xperia_4.1.2.zip:D
Yes. You need yo wipe your data first, and flash the camera.
I flashed existenz wthout factory reset and camera wont work/fc. I reflash the rom. But first, i backup my data with "Backup & Restore" app that preinstalled on xperia, wipe data, flash rom, and everythong work fine. Then i Restore the data again.
Sent from my C5303 using Tapatalk
whengzyi said:
Try this link,worked ------->>>> http://www.mediafire.com/download/t42xl425qjn2zvb/Honami_Camera_Xperia_4.1.2.zip:D
Click to expand...
Click to collapse
Thanks for the link. All works, except AR. Would you please tell me how to make it works?.
Installation procedure of mine are:
- mount system
- wipe data
- wipe cache
- wipe dalvik
- instal camera
- wipe data
- wipe dalvik
- reboot
Need help, thanks.
The links are not work for me!!
Please repair...
Will it work without root??
Sent from my C5303 using XDA Premium 4 mobile app
lukaskonvica said:
Will it work without root??
Sent from my C5303 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No, you must root
This is available on the ExistenZ ROM, and working fine too.
Hi guys,
Yesterday i finally decide to unlock my bootloader and switch to JB with my Xperia u.
I choose the v6 lite vu Devswift, and i follow the installation instructions. I flashed experimental kernel v11a, did my wipes and flashed the rom with cwm. Everything went well and i now enjoy my phone with nice look and good speed, but...
I can't activate bluetooth. When i try to turn it on, it turn on for like 0,1 sec and turn back off !
I choose this rom cause the OP say BT is working so i'm a little bit disappointed with this. I use BT very often.
Can anybody help me with this problem ?
Thanks
Sent from my ST25i using xda app-developers app
Anyone ? An I the only one with this bug ? If so, maybe my installation wasn't so well and I made a mistake but i dont want to restart from scratch for nothing :-S
Please, If anybody can help me ?!
Sent from my ST25i using xda app-developers app
plancoet said:
Anyone ? An I the only one with this bug ? If so, maybe my installation wasn't so well and I made a mistake but i dont want to restart from scratch for nothing :-S
Please, If anybody can help me ?!
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
install experimental v11c kernel and clear cache and dalvik cache
suyash691 said:
install experimental v11c kernel and clear cache and dalvik cache
Click to expand...
Click to collapse
Thanks for your answer. I try this but no change : i'm still unable to activate bluetooth, even with Experiment v11c.
Anyone has an idea ?
plancoet said:
Thanks for your answer. I try this but no change : i'm still unable to activate bluetooth, even with Experiment v11c.
Anyone has an idea ?
Click to expand...
Click to collapse
U r Bluetooth module isn't getting initialized properly
So wipe ur Rom completely..& b4 flashing ur Rom flash experimental v11c
Try it.!
Make sure u wipe it complete
Sent from my ST25i using Tapatalk
Ok i'll tro to wipe everything and reinstall the rom before flashing the kernel.
Hope it will work !
Sent from my ST25i using xda app-developers app
[MOD] Dual In-Call Speakerphone - 23.0.1.A.5.77 & 23.1.A.0.690 FWs - LOLLIPOP UPDATE
Here is a MOD to make both your speakers work when you are on Loud-Speaker during a call..
Tested and working by yours truly
FOR 23.0.1.A.5.77 (Kitkat) & 23.1.A.0.690 (Lollipop) FIRMWARES ONLY
Flash the .zip in recovery, it will backup your original mixer file before changing anything..
Choose Z3C_Dual_Speaker_Mod.zip for Kitkat .77 fw
Choose Z3C_Dual_Speaker_Mod_23.1.A.0.690.zip for Lollipop .690 fw
ALWAYS MAKE A CWM BACKUP FIRST BEFORE FLASHING!!
Enjoy!
Nice! Waiting for more awesome mods
Is it possible to make a mod to set a notifications and call volume separately?
Thanks
Any chance we'll be able to use it on other FW versions?? (I guess at the moment it just depends what FW version you're on?)
Dsteppa said:
Any chance we'll be able to use it on other FW versions?? (I guess at the moment it just depends what FW version you're on?)
Click to expand...
Click to collapse
I can mod the files in newer FW's as and when they come around.. no problem
Sent from my D5803 using XDA Premium HD app
tRippinthehead said:
Nice! Waiting for more awesome mods
Is it possible to make a mod to set a notifications and call volume separately?
Thanks
Click to expand...
Click to collapse
For this I think it would be easier for you to use a third party app.. Modding the files for that purpose would not be very good..
Sent from my D5803 using XDA Premium HD app
pricey2009 said:
Here is a MOD to make both your speakers work when you are on Loud-Speaker during a call..
Tested and working by yours truly
FOR 23.0.1.A.5.77 FIRMWARE ONLY - DO NOT FLASH THIS ON ANY OTHER FW.
THIS WILL NOT WORK FOR THE Z3 EITHER!!
Flash the .zip in recovery, it will backup your original mixer file before changing anything..
HOWEVER, ALWAYS MAKE A CWM BACKUP FIRST BEFORE FLASHING!!
Enjoy!
Click to expand...
Click to collapse
Cool, my Z3C is getting better and better by the day. Thanks a ton for the mod.
Now, no intention to steal your work but neither do I wanna die dumb one day , hence would you mind sharing your insights what exactly needs to modified in order to enable both speakers in a call? Thanks again! :thumbup:
Sent from my D5803 using XDA Free mobile app
sxtester said:
Cool, my Z3C is getting better and better by the day. Thanks a ton for the mod.
Now, no intention to steal your work but neither do I wanna die dumb one day , hence would you mind sharing your insights what exactly needs to modified in order to enable both speakers in a call? Thanks again! :thumbup:
Sent from my D5803 using XDA Free mobile app
Click to expand...
Click to collapse
From what I saw in the XML, it forces the audio mixer to use "Both" speakers instead of "Bottom"
davebugyi said:
From what I saw in the XML, it forces the audio mixer to use "Both" speakers instead of "Bottom"
Click to expand...
Click to collapse
Yes, and it works. It's almost too loud now
Sent from my D5803 using XDA Free mobile app
sxtester said:
Yes, and it works. It's almost too loud now
Sent from my D5803 using XDA Free mobile app
Click to expand...
Click to collapse
Loud is better
Sent from my D5803 using XDA Free mobile app
@pricey2009,
Thanks for your work , :good:
Does this mod work also for ringtones?
Inviato dal mio D5803 utilizzando Tapatalk
pricey2009 said:
Here is a MOD to make both your speakers work when you are on Loud-Speaker during a call..
Click to expand...
Click to collapse
What exactly was modified in this file? Is it possible to just add necessary lines to an existing file, because I already have it modified for 'extra volume in headphones' mod, and wouldn't like to loose that.
zhekazheka said:
What exactly was modified in this file? Is it possible to just add necessary lines to an existing file, because I already have it modified for 'extra volume in headphones' mod, and wouldn't like to loose that.
Click to expand...
Click to collapse
Where can I find this mod?
this one is a keeper !! thanks!
[MOD] Dual In-Call Speakerphone - Z3C - 23.0.1.A.5.77 FW
spyvsspy said:
this one is a keeper !! thanks!
Click to expand...
Click to collapse
Does this mod work?
I've tested on D5803, rooted, 23.0.1.A.5.77 FW.
it give me error when flashing with twrp.
daphix said:
Does this mod work?
I've tested on D5803, rooted, 23.0.1.A.5.77 FW.
it give me error when flashing with twrp.
Click to expand...
Click to collapse
worked like a charm on D5833 (23.0.1.A.5.77) flashin from TWRP booted by NDR Utils
maybe your download is somehow corrupted ? did you try re-download it ? save it on the internal storage maybe?
This mod is a huge help. Thanks!
hello, I did not save any backup folder : system/etc
how do I fix?
Patybello said:
hello, I did not save any backup folder : system/etc
how do I fix?
Click to expand...
Click to collapse
Go into system/etc using root explorer or similar file manager, delete the .bak off the end off the following file:
mixer_paths.xml.bak
Then set the permissions and reboot.
Or you could just restore your CWM backup that you should of done before flashing..
Sent from my D5803 using XDA Premium HD app
you know ... the problem is that I do not have the file " mixer_paths.xml.bak " into system/etc
not saved automatically