Related
So I'm pretty sure I'm going to flash that new rom once I'm home but i haven't done one of those nandroid back ups since the infuse was new...can someone point me in the right direction, i forgot how to do it. Do i really need to do it?
Sent from my SAMSUNG-SGH-I717 using Tapatalk
u can just boot recovery and then go to backup n restore and select backup no?
Sent from my SAMSUNG-SGH-I717 using XDA
You need to flash clockwork recovery then just go to the backups menu and do a backup. If you're going to install the Solaris rom you need clockwork anyway.
And DONT SKIP THE BACKUP!! I cannot stress this enough!
sent from my iPhone killers killer, Samsung Galaxy Note.
Backup up, backup always
Sent from the only smartphone designed by Chuck Norris
macked said:
You need to flash clockwork recovery then just go to the backups menu and do a backup. If you're going to install the Solaris rom you need clockwork anyway.
And DONT SKIP THE BACKUP!! I cannot stress this enough!
sent from my iPhone killers killer, Samsung Galaxy Note.
Click to expand...
Click to collapse
That's what i plan on doing...thanks.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Always always backup. I am a hypocrite (and many probably are) when I say this as I have skipped the back up. But I have learned the hardway. When I got into flashing with my G1 I soft bricked for about 3 days. This scared the bajesus out of me as there was no wide spread support, this was the first commercialy available android phone so any sites that did exsist were in their infantile stages at the time. I dodged the bullet and found someone who was able to get me fixed, but was a real PITA. The odds of this heppening are far less now a days so long as you read the instructions and follow them, but it's still not worth the risk. Doing a CWM backup takes a few minutes so there is no reason not to do one. Something else I learned the hard way the most people overlook, TEST THE BACKUP. Lucky for me I never got in an instance where my failed backup caused me anything but a little more work. I can think of atleast a half dozen times I created a backup that would fail when I tried to restore to it. If restoring the backup failes, you will be able to just boot back up into your ROM. However if your stuck in a bootloop from a failed ROM flash, and now your backup wont flash, you're in a little hot water. Likely you'll just have to pop your SD, xfer a couple images onto it, then back to phone and start flashing till you get one to boot up. Learn from those who have already been stupid, laughing at us is better then people laughing at you down the road.
Chief Geek said:
Always always backup. I am a hypocrite (and many probably are) when I say this as I have skipped the back up. But I have learned the hardway. When I got into flashing with my G1 I soft bricked for about 3 days. This scared the bajesus out of me as there was no wide spread support, this was the first commercialy available android phone so any sites that did exsist were in their infantile stages at the time. I dodged the bullet and found someone who was able to get me fixed, but was a real PITA. The odds of this heppening are far less now a days so long as you read the instructions and follow them, but it's still not worth the risk. Doing a CWM backup takes a few minutes so there is no reason not to do one. Something else I learned the hard way the most people overlook, TEST THE BACKUP. Lucky for me I never got in an instance where my failed backup caused me anything but a little more work. I can think of atleast a half dozen times I created a backup that would fail when I tried to restore to it. If restoring the backup failes, you will be able to just boot back up into your ROM. However if your stuck in a bootloop from a failed ROM flash, and now your backup wont flash, you're in a little hot water. Likely you'll just have to pop your SD, xfer a couple images onto it, then back to phone and start flashing till you get one to boot up. Learn from those who have already been stupid, laughing at us is better then people laughing at you down the road.
Click to expand...
Click to collapse
Good points but the first time i bricked my phone (flashed a gb rom over my froyo infuse) i just used the ultimate unbrick tool and bam back to stock, yea i have to start over from stock but at least my phone is all set. Is there a tool available for the note that unbricks it like the infuse has or is the back up we make our only option to unbrick?
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Do. It. (just do it)
Do it. Back it up!
Sure it adds a few minutes to your flashing routine, but just start it and go make a coffee.
I cannot begin to tell you how many times I was glad to have something to restore to after playing around with a new/updated rom package.
nash2000 said:
Good points but the first time i bricked my phone (flashed a gb rom over my froyo infuse) i just used the ultimate unbrick tool and bam back to stock, yea i have to start over from stock but at least my phone is all set. Is there a tool available for the note that unbricks it like the infuse has or is the back up we make our only option to unbrick?
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Click to expand...
Click to collapse
Nope, nothing that I know of, but the ROM scene is in its early stages. Theres not much need for tools such as this when there is little action. Something like this may hit the scene once our Note starts getting lots of custom ROM releases. I have only heard of that tool for two phones though. It's pretty hard to truely brick a phone nowadays, if you download the right packages and read the instructions a couple times and then (heres a commonly skipped one) FOLLOW the flashing directions, you won't encounter too many issues that can't be easily overcome by restoring image, delete rom and redownload, and try again. Alot of ICS ROMS actually require a double flash, if you don't read the instructions and don't catch that, you'll be freaking on the boot loop.
nash2000 said:
So I'm pretty sure I'm going to flash that new rom once I'm home but i haven't done one of those nandroid back ups since the infuse was new...can someone point me in the right direction, i forgot how to do it. Do i really need to do it?
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Click to expand...
Click to collapse
Should always backup before flashing something, just as a precaution.
Although I don't worry too much, it's fun re-customizing anyways. Going into market online and reinstalling apps is quick. Contacts and calender restores from google, at least for me anyways.
If you're thinking of flashing a new radio or going into something that makes major changes to the way your device is configured. I would highly recommend you have a nand of your last working setup. In case you need to revert.
clockcycle said:
Should always backup before flashing something, just as a precaution.
Although I don't worry too much, it's fun re-customizing anyways. Going into market online and reinstalling apps is quick. Contacts and calender restores from google, at least for me anyways.
If you're thinking of flashing a new radio or going into something that makes major changes to the way your device is configured. I would highly recommend you have a nand of your last working setup. In case you need to revert.
Click to expand...
Click to collapse
I think we're more concerned with if the image doesn't flash or he gets stuck in a boot loop. If your able to get to CWM, you can recover. But having something to flash from immediately on hand is a very nice thing to have. As for recustomizing though, i'm with you all the way there. I look at as a good way to cut the fat. I use Titanium backup, but don't do full automated restores, but rather select the desired apps and ignore the rest untill I find myself needing it.
Sorry to say but I'm parting ways with the LGOG. I bought myself a Nexus 4 instead now I need help solving a few issues before I sell it.
The guy who wan'ts to buy it has a few requests. He wants a pure google experience and the only rom that I think of is Vanilla Rootbox AOKP which is already flashed on the phone now and so far I think its the most stable roms for pure google for this phone. Every build I flashed I noticed that everytime the battery gets below 20% it won't charge anymore. No matter what outlet I stick the charger to. It will say " Connect to Charger" instead of charging.
I tried several chargers and same results. Only way I fix this is if I restore my nandroid back up and flashed an older build then update it with a new one.
I don't want this guy to buy the phone and call me back saying he can't charge his phone. This doesn't happen on stock rom and other roms I flashed. Only Rootbox. I've tried every other AOSP and Cyanogenmod roms for this phone. So far I don't like them. many bugs and some have weird pixel density. Rootbox would have been perfect if it weren't for that charging issue when battery drains low.
Also this guy knows about custom roms,but does not have an interest in even learning how to flash roms himself. He plans to use the rom forever.
If he wants to keep the same rom forever he needs it to be stock. No ifs, ands, or buts about it.
Sent via LG E970 with houstonn aokp 4.2.2
DeathmonkeyGTX said:
If he wants to keep the same rom forever he needs it to be stock. No ifs, ands, or buts about it.
Sent via LG E970 with houstonn aokp 4.2.2
Click to expand...
Click to collapse
So your using codefire X i heard its official now. i flashed it before,but the icons seem huge. Let me know how the rom is now. I would flash it right now,but I'm stuck at work.
I don't keep my signature updated. Presently I'm running the 5/21 build of CM by Shelnutt2 and it works fine, but in my extensive experience ROM's tend to gum up after months of use. If he wants rock-solid indefinite operation, then the answer is stock.
If dude won't take stock for an answer, I suggest loading it up with 5/21 CM, manually set 384mhz min freq and 1512 max freq in performance control, ondemand governor, and then make a nandroid of it.
After that, flash the stock 20j zip (not lgnpst), and make a nandroid and name it "STOCKROM" or something. Then if CM freaks out after some indeterminate quantity of time, then dude can boot to recovery and restore stock or the original CM10.1 that you loaded up in the first place.
DeathmonkeyGTX said:
I don't keep my signature updated. Presently I'm running the 5/21 build of CM by Shelnutt2 and it works fine, but in my extensive experience ROM's tend to gum up after months of use. If he wants rock-solid indefinite operation, then the answer is stock.
If dude won't take stock for an answer, I suggest loading it up with 5/21 CM, manually set 384mhz min freq and 1512 max freq in performance control, ondemand governor, and then make a nandroid of it.
After that, flash the stock 20j zip (not lgnpst), and make a nandroid and name it "STOCKROM" or something. Then if CM freaks out after some indeterminate quantity of time, then dude can boot to recovery and restore stock or the original CM10.1 that you loaded up in the first place.
Click to expand...
Click to collapse
Do you mind directing me to the rom thread of the 5/21 cm build. And all the ncessary zip files I need to back up . Thanks. I'll set those clock frequencies thanks for your help.
No. Go to shelnutt cm thread in original development section. First page, look for download link. When you click link, click top right of the page where it says next until you get page 4. Then around lower middle is 5-21-13.zip, although that's just part of the file name. Not spelling the whole thing out on my phone. Then google banks minimal gapps, download latest version. Flash them both in recovery after formatting everything but sd card.
After it boots, let it sit for a few minutes, then reboot to recovery. Tap "backup" and follow the prompts. When it's done, copy that backup to your pc.
Do the exact same for stock att jb zip in the android development section, except with it you don't need banks gapps. When you're done, restore the cm backup in recovery and copy the backup of stock rom to pc.
After all that, make sure the backups are on external sd card, and Dropbox them or burn a dvd of them to give to buyer. Just in case card fails or he has to format internal SD card
Then look for the stock att jb zip in
Sent via LG E970 with houstonn aokp 4.2.2
DeathmonkeyGTX said:
No. Go to shelnutt cm thread in original development section. First page, look for download link. When you click link, click top right of the page where it says next until you get page 4. Then around lower middle is 5-21-13.zip, although that's just part of the file name. Not spelling the whole thing out on my phone. Then google banks minimal gapps, download latest version. Flash them both in recovery after formatting everything but sd card.
After it boots, let it sit for a few minutes, then reboot to recovery. Tap "backup" and follow the prompts. When it's done, copy that backup to your pc.
Do the exact same for stock att jb zip in the android development section, except with it you don't need banks gapps. When you're done, restore the cm backup in recovery and copy the backup of stock rom to pc.
After all that, make sure the backups are on external sd card, and Dropbox them or burn a dvd of them to give to buyer. Just in case card fails or he has to format internal SD card
Then look for the stock att jb zip in
Sent via LG E970 with houstonn aokp 4.2.2
Click to expand...
Click to collapse
Thanks for your help man. Everything is running smoothly hopefully this buyer will appreciate it.
Z33type said:
Sorry to say but I'm parting ways with the LGOG. I bought myself a Nexus 4 instead now I need help solving a few issues before I sell it.
Click to expand...
Click to collapse
I ended up buying an N4 too. Went back to using the OG. N4 is in my drawer lol.
Sent from my LG-E970 using xda app-developers app
I'm gonna go out on a limb here & ask a question that's been on my mind for a while, so bear with me. But first, let me give you some background so there's no confusion & no unnecessary questions asked. I'm by no means a "pro" at modifying my Note 3, I just follow instructions carefully & then implement those directions to achieve results. That's how I rooted my Note 3 but could still care less that I tripped Knox in the end.
I have the 32 GB Sprint Galaxy Note 3 with an 8 GB microSD. It's rooted using Chainfire's method. I also have TWRP for a recovery, but I'm using the stock Sprint ROM that came with it. I have a few root apps installed (Titanium backup, AdAway & Root Explorer) but the rest are what Sprint (& Android) put in there, minus a few that are totally unnecessary for me...(chat apps, picture drawings, step counting & so on) that were removed with Titanuim. It's still on 4.3 Jellybean with PUBMJ4 baseband. I also have the Wi-Fi hotspot fixed through 2 file replacements using Root Explorer.
Now that you know what I have, onto the question...
I see many, many ROMs in other threads that I'd like to try out, but don't know how to go about doing this. Before you jump right in & answer, here's my problem. If I try a ROM but don't like it, or it doesn't suit my needs, how can I go about going back to what I have now in the best (& fewest) steps necessary? In other words, to go back to exactly what ROM I have now, the apps installed, baseband, the whole nine yards. Just like a computer backup, it's a bit-for-bit restore, completely mirroring the hard drive. Understand?
Maybe you could explain to me like I'm seven years old what apps I need, what procedures are taken, the order in which they happen & so on. If I need an app or two to do just this, I have approximately $20 Google Play credit left.
Can a DEV or an experienced person that's done just this help a fellow out? Don't get me wrong, the stock ROM I'm using works for me, but there's ROMs posted that look just awesome! It's all about "personalization", am I right?
Easy, since you have a custom recovery installed (twrp) , you simply do a "nandroid" backup (I personally like to backup to an external SD card, so get a bigger one) before wiping and installing something new. If you like what you got, fine. If you want to go back, wipe and restore! Easy Peasy!
Sorry, being a father means sometimes your time suddenly becomes unavailable. But believe me, it's really easy once you figure out twrp.
I'll let another fine member get more details if you actually need them. ?
Sent from my calculator watch.
So did you figure it all out?
Sent from my SM-N900P using Tapatalk
kingdazy said:
Easy, since you have a custom recovery installed (twrp) , you simply do a "nandroid" backup (I personally like to backup to an external SD card, so get a bigger one) before wiping and installing something new. If you like what you got, fine. If you want to go back, wipe and restore! Easy Peasy!
Sorry, being a father means sometimes your time suddenly becomes unavailable. But believe me, it's really easy once you figure out twrp.
I'll let another fine member get more details if you actually need them. ?
Sent from my calculator watch.
Click to expand...
Click to collapse
Doing a Nandroid backup as we speak! I didn't realize TWRP could do that. (duh! ) I only installed TWRP because I just liked the name of it. TWERP!! (gotta nice sound to it, doesn't it??) Thanks a bunch! :good:
tonyevo52 said:
So did you figure it all out?
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
I did. I found a Youtube link on how to do a TWRP backup on the Sprint Note 3. Easy Peasy as said above! I'll try some ROMs this weekend (can't promise nuthin' cause it's gonna be 70 degrees this weekend & I'm itchin' to ride my mountainbike along the boardwalk at the Virginia Beach.)
But now that the hard part is outta the way, it's all easy street from here!
Just be sure to Please, oh god Please, read all instructions on any rom you decide to try. Doesn't hurt to read the last 10 pages of each too, get an idea of Current issues that may not be documented in the OP.
And don't get lazy, follow word for word. The only times I f*cked stuff up was when I didn't follow instructions (ie, thought my experience meant I knew best), or just got sloppy.
And, don't forget to wipe! (I wipe 3X, everytime, as a habit. Some people will give you reasons why that's unnecessary, but I can say confidently, if perhaps anecdotally, that I Never have the issues others have with bad flashes, softbricks, FCs, etc.)
Something to get comfortable with, even though you may never need it is ODIN. It's most common use is a utility for flashing stock ROMs and firmwares, great for recovery from bad things. Again, you may never need it, but have it ready in your Pc with a stock ROM file, just in case.
Finally, Titantium Backup can be your best friend, if used properly. It can also be a real pain, so don't become too dependant on it.
FIN
Sent from my calculator watch.
kingdazy said:
Just be sure to Please, oh god Please, read all instructions on any rom you decide to try. Doesn't hurt to read the last 10 pages of each too, get an idea of Current issues that may not be documented in the OP.
And don't get lazy, follow word for word. The only times I f*cked stuff up was when I didn't follow instructions (ie, thought my experience meant I knew best), or just got sloppy.
And, don't forget to wipe! (I wipe 3X, everytime, as a habit. Some people will give you reasons why that's unnecessary, but I can say confidently, if perhaps anecdotally, that I Never have the issues others have with bad flashes, softbricks, FCs, etc.)
Something to get comfortable with, even though you may never need it is ODIN. It's most common use is a utility for flashing stock ROMs and firmwares, great for recovery from bad things. Again, you may never need it, but have it ready in your Pc with a stock ROM file, just in case.
Finally, Titantium Backup can be your best friend, if used properly. It can also be a real pain, so don't become too dependant on it.
FIN
Sent from my calculator watch.
Click to expand...
Click to collapse
No worries! As I said in the OP, I follow directions carefully. I read everything.
Odin is my friend as well. I have it installed on my laptop. That's how I flashed basebands & deodexed stock rooted ROMs on my Galaxy S III. I also have the original stock Sprint ROM for this GN3 "just in case", in a folder sitting on my desktop with a few extra tools. I've never bricked a phone, unless you count using Samsung's online update (can't think of the name at the moment). It said 4.3 was available, so I downloaded it. It flashed, rebooted, but stuck there. Never finished the boot, just gave me an error code. Samsung's own update killed my GS3 & was unrecoverable. Believe me, I tried everything. What was strange, was the ROM was 4.3 but the baseband was the previous version, not the newer one, so the phone just puked. It never updated the baseband so it bricked. Now, I tried (and used) different radios with no problems before the update. Everything worked in harmony. Go figure!
Time for sleep my friend. Gotta work in the morning!
Some news sites are saying AT&T will push it mid August.
In preparation, I've already returned to the stock 4.4.2 ROM and have flashed stock recovery. I'm still rooted, however. Will I still get the OTA update when it is released?
iArtisan said:
Some news sites are saying AT&T will push it mid August.
In preparation, I've already returned to the stock 4.4.2 ROM and have flashed stock recovery. I'm still rooted, however. Will I still get the OTA update when it is released?
Click to expand...
Click to collapse
You should get it. But if any system files are changed by root, the OTA will not install. Otherwise, you should be good to go.
BTW, the Dev Edition 4.4.3 ROM is already posted in Development.
iArtisan said:
Some news sites are saying AT&T will push it mid August.
In preparation, I've already returned to the stock 4.4.2 ROM and have flashed stock recovery. I'm still rooted, however. Will I still get the OTA update when it is released?
Click to expand...
Click to collapse
What ROM were you running and how did you get back to stock? I'm stuck on ARHD 10.1 and can't get back to stock
noobsquared said:
What ROM were you running and how did you get back to stock? I'm stuck on ARHD 10.1 and can't get back to stock
Click to expand...
Click to collapse
He probably made a nandroid backup of his stock rom so that he could always go back to stock in cases like this.
You could technically use someone else stock nandroid as well just as long as all the numbers match up. I believe there was a thread here on that.
---------- Post added at 02:13 AM ---------- Previous post was at 02:08 AM ----------
iArtisan said:
Some news sites are saying AT&T will push it mid August.
In preparation, I've already returned to the stock 4.4.2 ROM and have flashed stock recovery. I'm still rooted, however. Will I still get the OTA update when it is released?
Click to expand...
Click to collapse
Make sure you restore all the bloatware as well or it won't update. I found this out with the last update. I would hold off on the update until you know it's safe to proceed without losing root unless you want to confirm it first for us. [emoji16]
noobsquared said:
What ROM were you running and how did you get back to stock? I'm stuck on ARHD 10.1 and can't get back to stock
Click to expand...
Click to collapse
What do you mean when you say you "can't get back to stock". What did you try and what was the result?
You can just flash a stock rooted ROM, a stock nandroid (as previously suggested) or run the 1.58 RUU.
volcalstone said:
He probably made a nandroid backup of his stock rom so that he could always go back to stock in cases like this.
You could technically use someone else stock nandroid as well just as long as all the numbers match up. I believe there was a thread here on that.
Click to expand...
Click to collapse
redpoint73 said:
What do you mean when you say you "can't get back to stock". What did you try and what was the result?
You can just flash a stock rooted ROM, a stock nandroid (as previously suggested) or run the 1.58 RUU.
Click to expand...
Click to collapse
I got this nandroid (1.12.502.18 - TWRP 2.6.3.3 Thanks to Wonders_Never_Cease) from http://forum.xda-developers.com/showthread.php?t=2701376 and tried to restore, it ends abruptly leaving wifi and boot screen broken. Phone still boots in ARHD 10.1 but doesn' work perfectly. I put the folder from rar file under TWRP Backup folder and it picked up fine but won't restore. Maybe because I have TWRP 2.7.1.0?
I just picked up the phone and it is S-ON with bootloader unlocked/tempered. I'm trying to get back to stock till we have RUU to convert it to DE eventually like the M7.
I was not able to download the RUU EXE file since it keeps ending abruptly like others suggested. I also tried the HBOOT no PC required version of RUU but it would end abruptly at parsing. Maybe because I'm S-ON? I checked the MID and CID, they are both AT&T stock.
Try flashing a stock rooted ROM from my Index (under CUSTOM ROMs): http://forum.xda-developers.com/showthread.php?t=2751432
noobsquared said:
I was not able to download the RUU EXE file since it keeps ending abruptly like others suggested.
Click to expand...
Click to collapse
I know lots of folks have been having this problem. One guy was going to post a mirror of the RUU, so you might see if he got around to that.
But honestly, the OTA isn't rolling out yet, so why bother at this point? I would just reflash Viper and get your phone fully working again and worry about the OTA later.
And why bother with the OTA at all, or wait for it to roll out? There are already 4.4.3 custom ROMs available. And there is also an AT&T version specific ROM based on the 4.4.4 Dev Edition RUU: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
The AT&T "official" OTA will probably have little if anything different from the DE ROM, aside from all of AT&T's crappy bloatware apps.
redpoint73 said:
Try flashing a stock rooted ROM from my Index (under CUSTOM ROMs): http://forum.xda-developers.com/showthread.php?t=2751432
I know lots of folks have been having this problem. One guy was going to post a mirror of the RUU, so you might see if he got around to that.
But honestly, the OTA isn't rolling out yet, so why bother at this point? I would just reflash Viper and get your phone fully working again and worry about the OTA later.
And why bother with the OTA at all, or wait for it to roll out? There are already 4.4.3 custom ROMs available. And there is also an AT&T version specific ROM based on the 4.4.4 Dev Edition RUU: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
The AT&T "official" OTA will probably have little if anything different from the DE ROM, aside from all of AT&T's crappy bloatware apps.
Click to expand...
Click to collapse
Thanks for the links and everything man but the whole reason I'm trying to go back to completely stock is that I feel there is something wrong with my phone or maybe this is normal for M8. When I flash ARHD 10.1 and click on finish installation, screen gets back to TWRP but then it goes dark for around 2 minutes. I thought it was dead but it finally lit back up and let me restart the phone. Tap on restart and it took a minute. First boot took well over 5 minutes. Been working fine since but I'm not sure why it sometime just sits there with screen off and pimps on it's own. I may try the full AT&T 4.4.3 ROM since it's very close to stock. If I update firmware, can I not go back to stock nandroid? Which I can't anyways but just wondering.
noobsquared said:
When I flash ARHD 10.1 and click on finish installation, screen gets back to TWRP but then it goes dark for around 2 minutes. I thought it was dead but it finally lit back up and let me restart the phone.
Click to expand...
Click to collapse
So after the ROM fully installs (progress bar fills up) and you click "Finish" in AROMA, the screen goes blank for 2 minutes? I haven't seen that. But it might be a ARDH anomaly (I've never flashed it).
noobsquared said:
First boot took well over 5 minutes.
Click to expand...
Click to collapse
Totally normal on the first boot after any ROM flash.
noobsquared said:
Been working fine since but I'm not sure why it sometime just sits there with screen off and pimps on it's own.
Click to expand...
Click to collapse
Ummm, not sure what is being said here "pimp on it's own". I'm guessing a typo or darned auto correct!
noobsquared said:
If I update firmware, can I not go back to stock nandroid? Which I can't anyways but just wondering.
Click to expand...
Click to collapse
I would highly recommend updating firmware if anything is acting buggy on a 2.22 base ROM.
You should be able to restore a nandroid fine with updated firmware. Only thing, is if the nandroid was based on a 1.XX ROM and doesn't play well with the new firmware, you may need to downgrade the firmware.
But honestly, things tend to be always moving forward firmware-wise. It won't be long until all custom ROMs are based on 2.XX, and the 1.XX base wil become obsolete; with most folks being on the newer firmware and few (if any) reasons to go back or be on old firmware.
redpoint73 said:
So after the ROM fully installs (progress bar fills up) and you click "Finish" in AROMA, the screen goes blank for 2 minutes? I haven't seen that. But it might be a ARDH anomaly (I've never flashed it).
I would highly recommend updating firmware if anything is acting buggy on a 2.22 base ROM.
You should be able to restore a nandroid fine with updated firmware. Only thing, is if the nandroid was based on a 1.XX ROM and doesn't play well with the new firmware, you may need to downgrade the firmware.
But honestly, things tend to be always moving forward firmware-wise. It won't be long until all custom ROMs are based on 2.XX, and the 1.XX base wil become obsolete; with most folks being on the newer firmware and few (if any) reasons to go back or be on old firmware.
Click to expand...
Click to collapse
Yes, once the rom is installed, it exits out to TWRP, I get a flash of TWRP screen and then it goes dark. I press power button and wait for 2 minutes for it to come back on. I'm tempted to just convert it to Dev Edition but with all the issues people are having with phones these days, I want to make sure I can get it fixed under warranty or something if hardware craps out.
I am not even able to restore the nandroid for AT&T at this point. TWRP starts restoring nandroid and then goes back to TWRP main screen and the ARHD rom becomes very buggy (wifi won't turn on, gets super slow, developer warning on boot screen goes away, etc.)
I will try to update the firmware and try to get on that AT&T Rom bandwagon to see how it goes. Thanks for all your help and input. I wish it wasn't so complicated with M8. M7 was so easy to mess with or maybe I got used to that lol
noobsquared said:
I am not even able to restore the nandroid for AT&T at this point. TWRP starts restoring nandroid and then goes back to TWRP main screen and the ARHD rom becomes very buggy (wifi won't turn on, gets super slow, developer warning on boot screen goes away, etc.)
Click to expand...
Click to collapse
After a aborted TWRP restore, I'm actually surprised to see the formerly installed ROM (I think that is what you are saying) to boot at all. Wipe and reflash ARHD.
Broken WiFi is a known issue with the 2.22 based ROMs + outdated firmware. Not sure about the other issues, but updating the firmware and reflashing ARHD might do the trick.
noobsquared said:
Yes, once the rom is installed, it exits out to TWRP, I get a flash of TWRP screen and then it goes dark. I press power button and wait for 2 minutes for it to come back on.
Click to expand...
Click to collapse
That's odd. Did this only happen once, or can your reproduce this bug? Any mention of this on the ARHD thread?
You might also try to wipe cache and re-install TWRP. Could just be a bad TWRP install.
noobsquared said:
I'm tempted to just convert it to Dev Edition but with all the issues people are having with phones these days, I want to make sure I can get it fixed under warranty or something if hardware craps out.
Click to expand...
Click to collapse
FYI, as long as you are a current account holder, AT&T doesn't give a darn what you change in software, they will still honor the warranty if there is a hardware issue.
redpoint73 said:
After a aborted TWRP restore, I'm actually surprised to see the formerly installed ROM (I think that is what you are saying) to boot at all. Wipe and reflash ARHD.
Broken WiFi is a known issue with the 2.22 based ROMs + outdated firmware. Not sure about the other issues, but updating the firmware and reflashing ARHD might do the trick.
That's odd. Did this only happen once, or can your reproduce this bug? Any mention of this on the ARHD thread?
You might also try to wipe cache and re-install TWRP. Could just be a bad TWRP install.
Click to expand...
Click to collapse
Thanks for the information on hardware warranty. I hope it never comes to that.
I actually installed ARHD twice or 3 times last night since every attempt to go back to AT&T stock failed and I had a half working jacked up device. I went in TWRP, re-installed ARHD and everything was good to go. Every time I installed the ROM, I had to wait a couple minutes to hit reboot after ROM installation since TWRP would take a nap. I'm not too worried about it since everything seems to be working fine but it's still kinda bothersome, you know?
At this point in time, everything is running well on ARHD 10.1 so I guess I will take a chill pill.
Thanks once again for all your help
noobsquared said:
Thanks for the information on hardware warranty. I hope it never comes to that.
I actually installed ARHD twice or 3 times last night since every attempt to go back to AT&T stock failed and I had a half working jacked up device. I went in TWRP, re-installed ARHD and everything was good to go. Every time I installed the ROM, I had to wait a couple minutes to hit reboot after ROM installation since TWRP would take a nap. I'm not too worried about it since everything seems to be working fine but it's still kinda bothersome, you know?
At this point in time, everything is running well on ARHD 10.1 so I guess I will take a chill pill.
Thanks once again for all your help
Click to expand...
Click to collapse
Just an FYI- the black screen is a common problem with aroma installers and is well known.. All the other issues? I haven't a clue.
Hello!
I'm using 2.22 WWE version stock rom with 4.4.3, but I have long boots of device with old AT&T firmware.
Is there any way to update firmware?
I'm s-on, and firewater doesn't works.
noobsquared said:
Thanks for the information on hardware warranty. I hope it never comes to that.
I actually installed ARHD twice or 3 times last night since every attempt to go back to AT&T stock failed and I had a half working jacked up device. I went in TWRP, re-installed ARHD and everything was good to go. Every time I installed the ROM, I had to wait a couple minutes to hit reboot after ROM installation since TWRP would take a nap. I'm not too worried about it since everything seems to be working fine but it's still kinda bothersome, you know?
At this point in time, everything is running well on ARHD 10.1 so I guess I will take a chill pill.
Thanks once again for all your help
Click to expand...
Click to collapse
OP here.
The black screen you're getting is due to TWRP timing out. You can turn that off in the settings. This is a non-issue though and nothing to worry about.
The long boot times, however, is a problem. This is happening because you're on the old AT&T firmware. Unfortunately, there's no way to flash the latest firmware without S-OFF. Your only option is to return to stock and wait for the official 4.4.3 OTA. Flash a nandroid backup (I'll send you a link to the one I used later, or just search around for the master list here.) through TWRP and then flash stock recovery through fastboot. Let me know if you need detailed instructions on how to do this.
Thanks guys for all the help and support. I messed with the phone quite a bit and tried quite a few things and all the posts here help me learn a lot too. I was able to go all stock after s-off using that RUU method. I tried a couple other roms and finally back to dev edition stock for now. Was able to convert completely to stock with all the info and so far so good.
Once again, thanks a bunch everyone
Sent from my HTC One_M8 using XDA Free mobile app
iArtisan said:
OP here.
The black screen you're getting is due to TWRP timing out. You can turn that off in the settings. This is a non-issue though and nothing to worry about.
The long boot times, however, is a problem. This is happening because you're on the old AT&T firmware. Unfortunately, there's no way to flash the latest firmware without S-OFF. Your only option is to return to stock and wait for the official 4.4.3 OTA. Flash a nandroid backup (I'll send you a link to the one I used later, or just search around for the master list here.) through TWRP and then flash stock recovery through fastboot. Let me know if you need detailed instructions on how to do this.
Click to expand...
Click to collapse
I bit the bullet and just paid $25 for SunShine so I could get S-OFF and update the firmware
http://forum.xda-developers.com/showthread.php?t=2792487
cachookaman said:
I bit the bullet and just paid $25 for SunShine so I could get S-OFF and update the firmware
http://forum.xda-developers.com/showthread.php?t=2792487
Click to expand...
Click to collapse
I had to do the same thing but given that what a pain it is without s-off, I'm not complaining. $25 is a small fee to pay for the peace of mind that you ha e almost full control of the device now.
Sent from my HTC One_M8 using XDA Free mobile app
This is a Backup of the PH1 ROM's system and modem partitions. This is a Pre-Rooted ROM with the SD Card write permissions fix. This is different from my other post in those two differences.
You will need a custom recovery to install this ROM. (http://forum.xda-developers.com/note...lipop-t3089382)
Always perform the appropriate backups and other steps just in case something messes up. If you are on Lollipop, you should be able to just flash and go without any data loss (except custom system apps), but no promises.
Extract the folder (ES File Explorer or 7 Zipper) to "extsdcard/TWRP/backups/[serial number]" then boot into recovery and restore the image. The easiest way to get this folder is to simply perform a backup first, then unzip this folder next to the one for the backup you just created.
I didn't factory reset prior to this backup because it's just system partitions, so let me know if there's anything weird.
https://drive.google.com/open?id=0B2iEgzRTFjrQa2JEbE1DSE9qNHM
Here's the Odin ROM:
http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178/page1
Here's my non-rooted TWRP ROM:
http://forum.xda-developers.com/not...stom-recovery-rom-stock-rooted-t3449321/page1
Still 5.0 this is probably just a security update
RDF
http://device.sprintpcs.com/Samsung/SM-N900P-SPRINT/PH1.rdf
evilvoice said:
Still 5.0 this is probably just a security update
RDF
http://device.sprintpcs.com/Samsung/SM-N900P-SPRINT/PH1.rdf
Click to expand...
Click to collapse
Yep, just a security update most likely. Looks like some of the stock (Sprint) apps may have been updated as well . The update file was only about 190 megabytes if I remember correctly.
Quick question on updating modem & firmware.. I'm stock rooted ok2, and i dont have this update yet. I am working toward flashing the newly released and highly anticipated DL Modded N5N7 v4 which requires the PH1 updated firmware.
Do I need to ODIN flash the update files from the other PHI ROM thread or can I just do a full wipe and flash this backup with TWRP?
Thanks in advance.
Sent from my SM-N900P using XDA Labs
MeAtKeRtN said:
Quick question on updating modem & firmware.. I'm stock rooted ok2, and i dont have this update yet. I am working toward flashing the newly released and highly anticipated DL Modded N5N7 v4 which requires the PH1 updated firmware.
Do I need to ODIN flash the update files from the other PHI ROM thread or can I just do a full wipe and flash this backup with TWRP?
Thanks in advance.
Sent from my SM-N900P using XDA Labs
Click to expand...
Click to collapse
You can just flash the rom you want and keep your current bootloader/modem. But it's always suggested to keep current with any bootloader/modem, that the OP mentioned. That way if there is a issue with the install, it wouldn't be that.
Sent from my Nexus s using XDA-Developers mobile app
jhunt75 said:
You can just flash the rom you want and keep your current bootloader/modem. But it's always suggested to keep current with any bootloader/modem, that the OP mentioned. That way if there is a issue with the install, it wouldn't be that.
Sent from my Nexus s using XDA-Developers mobile app
Click to expand...
Click to collapse
The preferable answer would have been 'NO' or 'I'M NOT SURE' as a direct answer to my very specific question... as I now have a phone that doesn't make phone calls.
MeAtKeRtN said:
The preferable answer would have been 'NO' or 'I'M NOT SURE' as a direct answer to my very specific question... as I now have a phone that doesn't make phone calls.
Click to expand...
Click to collapse
Hey, I've seen you in a few threads and figured I ask before I made the same mistake. I'm looking to upgrade to DL Modded N5N7 v4 like yourself. I have a exploding Note 7 still and I'm anticipating being blacklisted at some point. As crazy as it sounds I like my Note 3's snappiness and everything else over the 7. My issue is my Note 7 radio gets 4g in my job and my Note 3 radio is 3g or spotty. I'm sure my modem and baseband is outdated and may help being updated
I'm on a older Moars Rom Baseband Nk4 android version 4.4.2. Did you figure out where things went bad. I was thinking of following these instructions http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178 don't want to mess this up.
What did you use and what should you have used?
Thanks
Lyvewire said:
Hey, I've seen you in a few threads and figured I ask before I made the same mistake. I'm looking to upgrade to DL Modded N5N7 v4 like yourself. I have a exploding Note 7 still and I'm anticipating being blacklisted at some point. As crazy as it sounds I like my Note 3's snappiness and everything else over the 7. My issue is my Note 7 radio gets 4g in my job and my Note 3 radio is 3g or spotty. I'm sure my modem and baseband is outdated and may help being updated
I'm on a older Moars Rom Baseband Nk4 android version 4.4.2. Did you figure out where things went bad. I was thinking of following these instructions http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178 don't want to mess this up.
What did you use and what should you have used?
Thanks
Click to expand...
Click to collapse
My mistake was following bad advice and flashing the TWRP Backup of PH1 in the OP of this thread instead of ODIN flashing the full ROM-ODIN-PH1- Update- t3463178.
I was able to get TWRP to restore my backup to OK2. From there I did a full wipe 3x and ODIN flashed the full PH1 update, immediately rooted with CFautoroot and reinstalled TWRP 2.8.7.0.
From there I followed the OP instructions in the DL Modded N5N7 thread which require the ROM, Kernel Cleaner, MVNO Buzbee2, Sprint VVM, and I installed the DL MM UIX Kernel.
The ROM and kernel are both really well put together except my mobile network connection to Sprint has been intermittent... the phone was stuck roaming and was connecting in spurts with Verizon, sprint, or the network was unavailable.
I just dirty flashed the Rom, Kernel, and MVNO fix an hour or so ago and the APNs seem to be sticking now. We'll see.
I have three Note 3's and each has its own quirky 'personality'- not especially playing nicely with most of the Port ROMs available these days. Hope this answers your questions and helps someone else trying to keep their Note 3 thriving.
MeAtKeRtN said:
The preferable answer would have been 'NO' or 'I'M NOT SURE' as a direct answer to my very specific question... as I now have a phone that doesn't make phone calls.
Click to expand...
Click to collapse
I am not trying to start any trouble, but from reading your comment it seems you are suggesting I gave you bad or wrong advice. So I want to explain myself just in case it was a misunderstanding. All roms are capable of being flashed with older bootloaders and modems. But the proper thing to do, is to always be up to date with all bootloader/modem files. This way you will not run into any problems. Now I didn't mention anything about flashing the OP'S twrp backup method. I figured you may have been experienced enough to flash these BL/modem files from a source like sammobile. Then proceed to flash your rom of choice. As you experienced you lost your signal. It may have been a few reasons why this happen. 1. The way the OP mentioned to flash wasn't meant for your phone. Every phone response differently. 2. The rom for whatever reason can only be used if you dirty flashed over your current system. This will not be the only time you may have to do it this way. So instead of being sarcastic with your reply, maybe try and ask the one who is helping you to explain themselves more. We are all here to help each other, and by no means was my response to your question was meant to harm your phone.
Sent from my SM-N920C using XDA-Developers mobile app
jhunt75 said:
I am not trying to start any trouble, but from reading your comment it seems you are suggesting I gave you bad or wrong advice. So I want to explain myself just in case it was a misunderstanding. All roms are capable of being flashed with older bootloaders and modems. But the proper thing to do, is to always be up to date with all bootloader/modem files. This way you will not run into any problems. Now I didn't mention anything about flashing the OP'S twrp backup method. I figured you may have been experienced enough to flash these BL/modem files from a source like sammobile. Then proceed to flash your rom of choice. As you experienced you lost your signal. It may have been a few reasons why this happen. 1. The way the OP mentioned to flash wasn't meant for your phone. Every phone response differently. 2. The rom for whatever reason can only be used if you dirty flashed over your current system. This will not be the only time you may have to do it this way. So instead of being sarcastic with your reply, maybe try and ask the one who is helping you to explain themselves more. We are all here to help each other, and by no means was my response to your question was meant to harm your phone.
Click to expand...
Click to collapse
No misunderstanding here... I asked a specific either/or question directly related to the thread topic (twrp custom recovery version) and you either misunderstood my question or decided it required an answer other than a 'yes or no' As a result of your longwinded answer, I lost several hours working through how to get a signal back on my phone. Was pretty annoying.
MeAtKeRtN said:
No misunderstanding here... I asked a specific either/or question directly related to the thread topic (twrp custom recovery version) and you either misunderstood my question or decided it required an answer other than a 'yes or no' As a result of your longwinded answer, I lost several hours working through how to get a signal back on my phone. Was pretty annoying.
Click to expand...
Click to collapse
I never knew giving someone detailed information was a problem. It's funny how I never had an issue with the install, but you did. It seems you lack enough experience to realize a few things. But I will make it a point to never help you again. Whether that's to long-winded or not for you, oh well.
Sent from my SM-N920S using XDA-Developers mobile app
MeAtKeRtN said:
No misunderstanding here... I asked a specific either/or question directly related to the thread topic (twrp custom recovery version) and you either misunderstood my question or decided it required an answer other than a 'yes or no' As a result of your longwinded answer, I lost several hours working through how to get a signal back on my phone. Was pretty annoying.
Click to expand...
Click to collapse
Did you get it all figured out?
I did get it figured out. Wasn't much more than an unnecessary inconvenience that someone else might be able to avoid.
Ok, so something weird...
Im running KK4.4.2 with the NC5 baseband on Sprint.
I upgraded my TWRP to 2.780 to flash the recovery both first time 'dirty flashing' and the 2nd time doing a facory wipe.
I removed the battery after the flash.
When I reboot, the phone stays on the Yellow Sprint screen and the LED pusles blue slowly. So far been doing it for 15 mintues.
What am I missing?
Dave
Unidave199 said:
Ok, so something weird...
Im running KK4.4.2 with the NC5 baseband on Sprint.
I upgraded my TWRP to 2.780 to flash the recovery both first time 'dirty flashing' and the 2nd time doing a facory wipe.
I removed the battery after the flash.
When I reboot, the phone stays on the Yellow Sprint screen and the LED pusles blue slowly. So far been doing it for 15 mintues.
What am I missing?
Dave
Click to expand...
Click to collapse
Give it 30 minutes? It seriously takes a long time. Are you sure you want to upgrade to lollipop? In just asking because you've been on Kit Kat long after support for lollipop or this phone has long stopped. I'd suggest downloading the latest Odin and flashing that instead, unless there is something here you wanted? I'm rooted on PL1 and have no issues other than my phone being as old as it is and how many times it's been flashed.
evilvoice said:
Give it 30 minutes? It seriously takes a long time. Are you sure you want to upgrade to lollipop? In just asking because you've been on Kit Kat long after support for lollipop or this phone has long stopped. I'd suggest downloading the latest Odin and flashing that instead, unless there is something here you wanted? I'm rooted on PL1 and have no issues other than my phone being as old as it is and how many times it's been flashed.
Click to expand...
Click to collapse
30 minutes? Woah that is a long time. Ok I will give it a try sometime when I go to bed.
I am mainly trying to get the PL1 update and not mess with Odin if I can get around it. I would like to try and port the Darklord Marshmellow ROM and take advantage of built in google assistant
So I thought I would try them. And always get back if I need to but wanted to keep the PL1 modem updates.
I only have one problem with one other phone user... She doesnt always get my texts and I dont always get hers. I dont know if others arent getting them and just dont know but my 1 friend I text a lot so she notices when there is a gap.
Anyways. Just feeling out how I can maximize this phone's performance. NO plans on changing phones anytime soon.
Unidave199 said:
30 minutes? Woah that is a long time. Ok I will give it a try sometime when I go to bed.
I am mainly trying to get the PL1 update and not mess with Odin if I can get around it. I would like to try and port the Darklord Marshmellow ROM and take advantage of built in google assistant
So I thought I would try them. And always get back if I need to but wanted to keep the PL1 modem updates.
I only have one problem with one other phone user... She doesnt always get my texts and I dont always get hers. I dont know if others arent getting them and just dont know but my 1 friend I text a lot so she notices when there is a gap.
Anyways. Just feeling out how I can maximize this phone's performance. NO plans on changing phones anytime soon.
Click to expand...
Click to collapse
I still use my note 3. Granted not for main phone as I switched to iPhone, but I use it every day. I don't really know the hesitation of using Odin, but to each their own. If you did decide to use Odin, I'd flash the ROM, boot it, go to download mode again, flash TWRP, boot recovery (so it sticks and doesn't go back to stock recovery), flash SuperSU, done. You're rooted on PL1. Hopefully you have already backed up your text messages and other various things to either SDCard or something else. I'm not sure if that survives whether you wipe and flash clean or Odin. Depending on provider, that could be your issue with text messages. If you're with Sprint, check that you are on latest PRL. If not, make sure APN settings are correct.
If you're only looking for Assistant, I had it running on stock PL1. XDA did a blog post about enabling it in Lollipop, so once you upgrade, check it out. I couldn't stay on Marshmallow. Being that these are ports and not specifically built for our phone, I ran into issue with every single ROM either not being able to place calls, text (MMS actually), or wireless/data not working. No matter what I changed APN to, I would always have issues. Some do not. I just can't recommend a port when they haven't worked for me. Some roms have been abandoned, which meant if I found one that I could at least handle, it was so outdated that it was unusable (issues had arisen and the developer had moved on so they weren't being fixed). By handling a rom, I mean that after I upgraded to iPhone, I only needed wireless to work (to connect to hotspot) and it not go into a boot loop or crash all the time (some do). Those roms I have no idea if calls or text work because I wasn't using that. A lot have issues with wireless working.
One more thing you can try is to do a flash, wait about 30 minutes. If it still doesn't boot, pull the battery and reboot into recovery. Wipe data and cache and reboot again. It should boot. It'll still take a long time. Make sure you wait the 30 minutes before pulling the battery (it should have finished upgrading your system by then). Do note that first boot from now on will take forever no matter if it's a port or stock. Lollipop and higher take a long time to upgrade. I've only had 1 or 2 roms take around 5 minutes and that's because they were minimalist and without Google apps. The phone does get a little warm and uses a lot of battery, so I'd keep it plugged in.
Please report back if you got it to work and how. Like I said, I still use mine. I still visit this forum every day even though I've had an s5 and an s7 edge. I love this phone. I need to get mine replaced because I've worn it out: broken charger port so I have to make sure the cable is plugged in a certain way and I can't touch the phone while charging, side molding is broken off in places, some of my partitions can't be changed which means the memory is failing (not even Odin flashes correctly anymore let alone custom roms). But, it still keeps on ticking.
evilvoice said:
I still use my note 3. Granted not for main phone as I switched to iPhone, but I use it every day. I don't really know the hesitation of using Odin, but to each their own. If you did decide to use Odin, I'd flash the ROM, boot it, go to download mode again, flash TWRP, boot recovery (so it sticks and doesn't go back to stock recovery), flash SuperSU, done. You're rooted on PL1. Hopefully you have already backed up your text messages and other various things to either SDCard or something else. I'm not sure if that survives whether you wipe and flash clean or Odin. Depending on provider, that could be your issue with text messages. If you're with Sprint, check that you are on latest PRL. If not, make sure APN settings are correct.
If you're only looking for Assistant, I had it running on stock PL1. XDA did a blog post about enabling it in Lollipop, so once you upgrade, check it out. I couldn't stay on Marshmallow. Being that these are ports and not specifically built for our phone, I ran into issue with every single ROM either not being able to place calls, text (MMS actually), or wireless/data not working. No matter what I changed APN to, I would always have issues. Some do not. I just can't recommend a port when they haven't worked for me. Some roms have been abandoned, which meant if I found one that I could at least handle, it was so outdated that it was unusable (issues had arisen and the developer had moved on so they weren't being fixed). By handling a rom, I mean that after I upgraded to iPhone, I only needed wireless to work (to connect to hotspot) and it not go into a boot loop or crash all the time (some do). Those roms I have no idea if calls or text work because I wasn't using that. A lot have issues with wireless working.
One more thing you can try is to do a flash, wait about 30 minutes. If it still doesn't boot, pull the battery and reboot into recovery. Wipe data and cache and reboot again. It should boot. It'll still take a long time. Make sure you wait the 30 minutes before pulling the battery (it should have finished upgrading your system by then). Do note that first boot from now on will take forever no matter if it's a port or stock. Lollipop and higher take a long time to upgrade. I've only had 1 or 2 roms take around 5 minutes and that's because they were minimalist and without Google apps. The phone does get a little warm and uses a lot of battery, so I'd keep it plugged in.
Please report back if you got it to work and how. Like I said, I still use mine. I still visit this forum every day even though I've had an s5 and an s7 edge. I love this phone. I need to get mine replaced because I've worn it out: broken charger port so I have to make sure the cable is plugged in a certain way and I can't touch the phone while charging, side molding is broken off in places, some of my partitions can't be changed which means the memory is failing (not even Odin flashes correctly anymore let alone custom roms). But, it still keeps on ticking.
Click to expand...
Click to collapse
Come back to Android! We miss you!!!!
Yes I am backed up and also have a Titanium Backup of everything so I am pretty much covered... I have even backed up the backups to my PC!
You have much wisdom in what you are saying. I thought I would play around with some other ROM's and see what the potential is.
I hear good things about the Darklord Reborn by Midevil and JCorderno so thought I would investigate.
I am not opposed to using Odin, but I was at work, and no access to a computer so wanted to see if I could do the upgrade 'on the fly' since I am already rooted and with recovery.
Man, waiting 30 minutes for a phone to boot sounds like a anxiety attack waiting to happen! But still wanna give it a try.
As to your USB port. Have you thought of going wireless charging? I did and haven't looked back! You can get a wireless charging back and a case that will fit at...
for the charging back
https://smile.amazon.com/Samsung-Ga...=8-2&keywords=samsung+note+3+wireless+charger
for the case
https://smile.amazon.com/gp/product/B00F3KP156/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Clone Wars....
Just wanted to put out a big THANKS for this.. I broke my Note 3 after 2,433 days (long story) but had bought a stock spare on Ebay last year... Making the switch now, but your PH1 Flashable update is making it super easy!
To let everyone who needs to use this nowdays... you will need to Flash an older TWRP (I used 2.7.8) in order to allow the Modem partition to be overwritten. Then you can flash up to 3.x to load a Android 10 based rom.