Hi all! My phone is Star N9500. And when I want update it to 4.2.2, it bricked, because it update preload.
Erorr is:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
Please help me!
I went to the NeedRom website and downloaded the latest ROM that was not customized and followed the instructions there to unbrick my Star N9500.
Some of these ROM's and in particular the instructions are very lacking in how to do the flash process. To be honest it sucks.
Someone needs to do a complete, concise and thorough tutorial on how to do these ROM flashes. Plus there are two or three methods on how to do them. Some use an outside tool application installed on Windows others use an internal Android app like MobileUncle and then flash from an SD Card.
Again... IMHO most instructions are lacking and somewhat confusing.
STAR n9500
help my star n9500 is bricked..and windows can't detect the driver..it is said "Unknown device" What should I do???
is there any solution???
Related
I bought a goophone i5c from goophone.cc the rom it had installed was a bit sluggish so i updated it to the latest firmware
Was unaware it must of been the wrong version and bricked the phone
the model is mt6572
and has the goophone bee logo on the back and has been comfirmed to be an official goophone at inspection of the mobo.
i have the mediatek drivers installed and i am able to get flash tools to flash but i get a error such as this
" brom error s_ft_enable_dram_fail (4032)"
i have tried multiple flash tools
tried multiple roms
tried multiple drivers and, computers
any help would be greatly appericated
Hello
Today I tried to update my phone OT-4033X with Custom ROM, but the process did not work and he stock in logo boot
i tried the flash it with backup i already take with MTK Droid Tools
after i did format from SP flash tool like tuto in net
and i go for Download but the process does not succeed and give me "s_not_enough_storage_space (1011)" in SP flash Tool
I tried with several copy
SP-Flash-Tool-v3.1344.0.212
SP_Flash_Tool_v3.1316.0.150
SP_Flash_Tool_v5.1348.00
and alcatel Mobile Upgrade S does not recognize the phone
any solutions pls
and sorry for my bad english
Have you fix that BROM ERROR? I'm having the same problem too. :crying::crying::crying:
Hi,
I had the same issue with mine 4033x. I managed to fix it by fallowing the instructions on this site:
http://www.thefirmwarehub.com/alcatel-pop-c3-stock-rom/
but instead of the included scatter file (MT6572_Android_scatter) use the one attached to this post.
I hope this will help.
Regards.
Hello,
I have an Lenovo S960, which is an MTK 6589 Device.
Coming to the Point, Yesterday I my little sis didn't know what did, Phone Got Soft Brick.
Ohk, I tried to Re-Flash the ROM with SP Flash Tool Ver 3.1xx But somehow it got stuck on 18% and got error of brom error s_da_sdmmc_write_failed (3149).
When i tried to Format+All Download with the latest version of SP Flash Tool, it keep saying "Unrecognized Rom Detected".
Now, I tried Flashing the same ROM with different Versions of SP Flash Tool, and Got several Errors. amongst which one error really horrified me, i didn't remember exactly what was that, but it was something like No Valid partition Management Table.
After some research i found that the rom can be Flashed via MTK DROID TOOLS Onlyy, but for which i need Back Up of the Rom, which i didn't have.
The point is:
1) Is there any way to Flash the Rom with SP Flashtool bypassing these errors.
2) I would be very thank ful if any one can provide me the Back Up Rom for Lenovo Vibe X S960.
One more thing, This is my Fiance's Phone, and she's about to kill me if i didn't Give her phone on Sunday..
Please Help me..
hi friends i am new at this forum and need some help, before this, I usually figured everything out by reading others thread or googling. But now I need your help guys. I recently try to flash my i ball cobalt 4 with the stock rom of the same version [downloaded from needrom.com],But I probably did a mistake and I was messing up with bootloader. The result is that my phone wont even start. No bootloop, no recovery, nothing. Display and everything else remains dead.
At least is phone still detected by computer when I connect it as mtk usb port[it is on META mode now i think]
Also in Smart Phone Flash Tools phone is still visible.
But when I try to flash or format anything it gives me this error message:
It says:
"BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!
[HINT]: Please check your load matches to your target which is to be downloaded"
I already tried different versions of SPFT and also stock cobalt 4's ROM's from diferrent sources.cleaned mtk deivers many times by using usbdeview according to tutorial. but sadly did not get any success.
My OS is Windows 7x64.
Please guys, this is the first time I'm asking for a help, because I am really desperate and I don't know what else try to make my phone flashable and working again. I googled, searched lot of topics, everything what I was capable to think about. I would be super gratefull for help.
THX guys for your suggestions and help!!!
BTW: I heard some phones can be turned to some kind of "service" bootloader mode with connecting two contacts on main board of phone. Do you know if iball cobalt 4 have this function?
one more thing is that when i selected scatter file first time in spft it gave me an error invalid scatter file so i had to delete scatter file's first line[ie birdtoolminver3.4].so is the scatter file is problem of mentioned error.
Hi guys, I hope someone can help me. I took a punt on a cheap Chinese phone and it arrived with all sorts of malware installed. after a bit of research I discovered I couldn't remove them without rooting, but as its based on an MTK6580 chip, it isn't as easy as using a one click root tool. So after learning I would need to use SP Flash Tool, I proceeded to follow the steps and have ended up bricking it. The MT6580 scatter file I found just results in the following error messages. error s_dl_get_dram_setting_fail 5054 and error s_ft_enable_dram_fail (4032)
The PC recognises it, but I can't find a pre loader that works with it. Has this been royally fooked? or can it be rescued? Any help will be appreciated as it seems decent enough for my needs and I already got my money back but if its gone toes up then its no big deal.
Anyone?