Related
Problem: When I flash AOKP (any version) a day or two or even as soon as a reboot my phone loose all data and cell functionality. I cant get 3G or 4G I cant even send text. So I don't know what the actual problem is. Every radio I have had work with other ROMs (Jellybeans or PACMAN).
Backround: I originally rooted (casual )back when JBVRALL4 was the issued modem from VZW I went directly to Jellybeans to give touchwiz a fighting chance. Needless to say I crave AOSP (I came from a Galaxy Nexus). I am curently running PACMAN 22.1.0 (Based off Cyanogen 10.1 AOKP MR1 build 5 and Paranoid android ## ) I have good signal and everything works as expected so I dont know what the problem is. I have TWRP 2.5.0.0 and I always wipe data and all cache.
Conclusion: I'm at my whits end here boys and girls please help.. any help.
doncerda said:
Problem: When I flash AOKP (any version) a day or two or even as soon as a reboot my phone loose all data and cell functionality. I cant get 3G or 4G I cant even send text. So I don't know what the actual problem is. Every radio I have had work with other ROMs (Jellybeans or PACMAN).
Backround: I originally rooted (casual )back when JBVRALL4 was the issued modem from VZW I went directly to Jellybeans to give touchwiz a fighting chance. Needless to say I crave AOSP (I came from a Galaxy Nexus). I am curently running PACMAN 22.1.0 (Based off Cyanogen 10.1 AOKP MR1 build 5 and Paranoid android ## ) I have good signal and everything works as expected so I dont know what the problem is. I have TWRP 2.5.0.0 and I always wipe data and all cache.
Conclusion: I'm at my whits end here boys and girls please help.. any help.
Click to expand...
Click to collapse
I may have missed you saying it, but did you check the MD5? Also have you tried flashing the radio after the rom?
The same thing happened with a S3 rom, I want to say PA but I can't remember for sure, and it was caused by flashing the rom and gapps in the same session. I dont know why that would make a difference but the dev said that was the reason, so maybe try flashing the rom and giving it 10 minutes to key or settle them reboot and flan your gapps and see if that makes a difference.
Sent from my SCH-I605 using XDA Premium HD app
Negative i did not check the MD every time I flashed it said no MD5 so i didn't think of it.. But i will try this method tomorrow..i cant see how this would effect again but till i will try.Thanks for the reply
Try following instructions in this post http://forum.xda-developers.com/showthread.php?p=36008815 took me an while to find that again
Sent from my SPH-L900 using Tapatalk 2
Wow... I never thought I'd have to go into terminal to fix this.. I want to wait till AOKP gets another milestone build (should be within the next 2 weeks i think) but if I have some free time I'll try the first method (install the ROM and hen after 10 or something minutes install the Gapps) and if that doesn't help I'll definitely pop open the terminal and give this a try... Will keep everyone posted. thanks a lot for the help guys
the lyatoh
slick_rick said:
Try following instructions in this post http://forum.xda-developers.com/showthread.php?p=36008815 took me an while to find that again
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
thanks for the help...I tried it and hopefully i works:fingers-crossed: cant really tell minutes after you know and i get bad signal reception in my house either way. Will keep everyone posted thanks again :good:
I have problems flashing Roms I dont know what could be the reason. Couple days ago my SD card died I bought a new one I tried to flash the new version of Tweaked I forgot to made a back up and for some reason my phone will get stuck on the "Galaxy note 2" screen or return to the TWRP menu I tried to flash at least 5 different roms and same results the only one It was able to boot was Clean rom 3.1. I updated TWRP to the latest version and still having the same issues if any one can tell me what to do I will appreciate it
Sent from my SCH-I605 using xda app-developers app
You do know first boots take a while right? You should wait up to or at least 10 minutes for the first boot of a rom.
AldenIsRad said:
You do know first boots take a while right? You should wait up to or at least 10 minutes for the first boot of a rom.
Click to expand...
Click to collapse
I'll try again when I get home. Thanks
Sent from my SCH-I605 using xda app-developers app
I'm actually having a similar, if more limited, problem. I recently tried flashing P.A.C. rom onto my Note 2, but it would just hang on the galaxy note 2 screen. I left it for more than 10 minutes without change. However, after that I tried flashing Cyanogen; which worked just fine.
I'd greatly appreciate any tips on how to figure out what's going wrong.
Epsilon Rose said:
I'm actually having a similar, if more limited, problem. I recently tried flashing P.A.C. rom onto my Note 2, but it would just hang on the galaxy note 2 screen. I left it for more than 10 minutes without change. However, after that I tried flashing Cyanogen; which worked just fine.
I'd greatly appreciate any tips on how to figure out what's going wrong.
Click to expand...
Click to collapse
I never had these issues flashing roms except for one I might try with CWR
Sent from my SCH-I605 using xda app-developers app
killa408shark said:
I never had these issues flashing roms except for one I might try with CWR
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Huh? Did I misinterpret something?
In the op you said:
for some reason my phone will get stuck on the "Galaxy note 2" screen or return to the TWRP menu I tried to flash at least 5 different roms and same results the only one It was able to boot was Clean rom 3.1.
Click to expand...
Click to collapse
Which seemed pretty similar.
Epsilon Rose said:
Huh? Did I misinterpret something?
In the op you said:
Which seemed pretty similar.
Click to expand...
Click to collapse
Before I never had issues till a couple days ago. Like you i waited for more than 10 minutes and never booted up
Sent from my Transformer TF101 using xda app-developers app
And now it works.
So, I seem to actually have things working now and I figured I should give a quick update.
Before, I was using a nightly of P.A.C. rom, because I didn't see anything more stable at the time. Now I've switched to a milestone rom and it boots just fine. At this point, I think I'd pin the blame on a glitch the rom I was trying to flash; given the fact that Cyanogen and the current iteration work fine
Hello . iam having issues , after flashing a rom for my htc one m7 , s-On , after flashing it . stupid cos i had mybe to change to S-Off, anyway the phone now stuck on the welcome page from the new ROM , and i get on display a message "Unfortunately ,Google Text-to speech Engine has stopped , i cant though press anything . . i try to get in to recovery but cant . now in the left corner says Safe mode . Very frustrated ... any advice=? iam a mac owner but i could use my moms .
i got a few days before i go abroad and i would preffer having the phone with me .. .. i dont know what to do .
i try to find some info here .. maybe if some one knows that there is some info here sent me the link?
marjanna said:
Hello . iam having issues , after flashing a rom for my htc one m7 , s-On , after flashing it . stupid cos i had mybe to change to S-Off, anyway the phone now stuck on the welcome page from the new ROM , and i get on display a message "Unfortunately ,Google Text-to speech Engine has stopped , i cant though press anything . . i try to get in to recovery but cant . now in the left corner says Safe mode . Very frustrated ... any advice=? iam a mac owner but i could use my moms .
i got a few days before i go abroad and i would preffer having the phone with me .. .. i dont know what to do .
i try to find some info here .. maybe if some one knows that there is some info here sent me the link?
Click to expand...
Click to collapse
Sorry to say this is the verizon note ii q&a. I'm not even sure which HTC one m7 variant you have to point you to the correct forum.
MunkinDrunky said:
Sorry to say this is the verizon note ii q&a. I'm not even sure which HTC one m7 variant you have to point you to the correct forum.
Click to expand...
Click to collapse
Edited: Thanks i found it and i fixed the problem .
I have ported a few different custom rom's to my Verizon s4. I had not had any issues thus far. I decided to try an original android development rom and decided to go with the pac man rom. It seemed, and still does seem like a no brainer being it has the best from roms by top developers. I had been using hyperdrive for the past month or so, and I originally tried to move right to the latest nightlie ( 8/16). I use twrp and as soon as I booted the keyboard would not work for me to set up my phone. I went back into the pac thread and ended up flashing the 7/30 milestone release. It works great, however I would really like to run a 4.3 rom, and I would love for it to be pac man rom. I have tried updating using the exact directions to a t and once my phone updates every time I try and do anything my phone says android process a core has stopped. Also , whenever I click on my phone , contacts, or any other basic phone function it says app not installed. I am a newb, I have only been flashing for about four months. I have a galaxy nexus as well that I play with. I have not ran into an issue I have not been able to resolve using discussions or questions already posted on xda. I am coming up with nothing this time however. This is my first post and my first request for assistance. I hope my post is not to long. I would greatly appreciate any help offered.
Flashed the right gapps?
Sent from my SCH-I545 using Tapatalk 4
yep.....
dadsterflip said:
Flashed the right gapps?
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
I think I did, there was a link directly under the link for the ROM in the download box of the PAC man ROM page on this site. Those are the gapps I flashed. Goo manager keeps saying there is a gapps update for me though.
I have followed carefully (twice) the instal Tut's for both CM 9 and CM 10.1 however I have a screen problem and hang on start up.
When turning on the Atrix 4G (MB860) it seems to start Ok saying Unlocked and the Red M logo shows in the middle, as normal.
Then suddenly the screen seems to split into segments so there are 2 Unlocked texts at the top and an M in the middle at he very bottom, and two half M's either side. The phone hangs at that point.
Any ideas please ?
thanks
Krammig said:
I have followed carefully (twice) the instal Tut's for both CM 9 and CM 10.1 however I have a screen problem and hang on start up.
When turning on the Atrix 4G (MB860) it seems to start Ok saying Unlocked and the Red M logo shows in the middle, as normal.
Then suddenly the screen seems to split into segments so there are 2 Unlocked texts at the top and an M in the middle at he very bottom, and two half M's either side. The phone hangs at that point.
Any ideas please ?
thanks
Click to expand...
Click to collapse
that was normal, everyone have 2 unlocked & 2 1/2 logos. just wait, it took 3~5 minutes to boot.
thecjan said:
that was normal, everyone have 2 unlocked & 2 1/2 logos. just wait, it took 3~5 minutes to boot.
Click to expand...
Click to collapse
Thanks for that feedback. I tried again but it is still doing the same thing. I even went for a walk around the block to give it time
do you had full wipe?
Correct yes.
Via the Advanced section I did a Cache, Dalvik, System etc etc.
Then I installed the CM-9 same hanging situation.
Full wipe again via all items, then I tried 10.1 same hanging situation.
I have Unlocked the phone, and I did also Root the phone, but what if the Root didn't work, would it hang like this or do something different. I guess what I am asking is, can I check the root worked, or can I assume it worked if the install gets this far anyway ?
thanks
And i bet you're on a 3.1.10 kernel and if you turn off your device and plug it into charge, the battery meter doesn't flash. Am i right?
Sent from my MB886 using xda app-developers app
@ palmbeac05 thanks for the reply. All I can see is Recovery v4.0.0.2 Not sure where to check for the Kernel as I can't get in any further than the M logo screen, (apart from the Recovery section)
thanks
Krammig said:
@ palmbeac05 thanks for the reply. All I can see is Recovery v4.0.0.2 Not sure where to check for the Kernel as I can't get in any further than the M logo screen, (apart from the Recovery section)
thanks
Click to expand...
Click to collapse
so, you did not flashed K's kernel ?
Krammig said:
@ palmbeac05 thanks for the reply. All I can see is Recovery v4.0.0.2 Not sure where to check for the Kernel as I can't get in any further than the M logo screen, (apart from the Recovery section)
thanks
Click to expand...
Click to collapse
First off, you should really update that recovery. 4.x recoveries have been long since retired. We're now on 5.0.2.x up to 6.0.4.4
Second, what exact rom are you using (meaning state the file name of the rom package you are using)?
Sent from my MB886 using xda app-developers app
The ROM I have downloaded is cm-10.1-20131211-UNOFFICIAL-epinter-olympus.zip
And gapps-jb-20131207-olympus.zip
I tried gapps-kk-20140105.zip but it came up with an error during the install.
I hope I am using the correct versions as these are the ones I could find on the net ?
cheers
Krammig said:
The ROM I have downloaded is cm-10.1-20131211-UNOFFICIAL-epinter-olympus.zip
And gapps-jb-20131207-olympus.zip
I tried gapps-kk-20140105.zip but it came up with an error during the install.
I hope I am using the correct versions as these are the ones I could find on the net ?
cheers
Click to expand...
Click to collapse
CM10-10.2 is JB. CM11 is KK. Why you would flash KK gapps onto a JB build is extremely confusing.
That build is using the 3.1.10 kernel. To see that, go to options>about phone.
Boot logo and charging meter (as mentioned in my previous post) are related in terms of the kernel. Fix one, get a glitchy image on the screen for the other. Normal, and already discussed across all 3.1.10 kernel based roms.
Sent from my MB886 using xda app-developers app
palmbeach05 said:
CM10-10.2 is JB. CM11 is KK. Why you would flash KK gapps onto a JB build is extremely confusing.
That build is using the 3.1.10 kernel. To see that, go to options>about phone.
Boot logo and charging meter (as mentioned in my previous post) are related in terms of the kernel. Fix one, get a glitchy image on the screen for the other. Normal, and already discussed across all 3.1.10 kernel based roms.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
..."Why you would flash KK gapps onto a JB build is extremely confusing."... If you're confused then imagine how I feel Just kidding.
I am absolutely new to all this so apologies for my lack of familiarity. I'm flying by the seat of my pants here. I'm trying to catch on as I read posts around the place.
So as I read your feedback I should ;
a) upgrade the Recovery to 5.x or 6.x (not sure where to find these)
b) locate CM10-10.2 JB or CM 11 KK and use the appropriate gapps (JB or KK)
glitchy image doesn't worry me at all, I am just keen to get a V4.x of Android installed so I can use this phone for some other security development that needs Android 4.x, otherwise I have to splash out $150 to buy a new phone which I'm not keen on doing.
It would be nice also to have the fingerprint working on the upgraded version. I saw an addon for Beanstalk somewhere and the developer said that installing that apk would activate the finger scanner. That said, I don't really have much of an idea what I am talking about, just what I have gleaned reading postings. I am 59 years old and with a bunch of old school IT like IBM mainframes etc behind me but am new to all this upgrading of mobiles
If you could steer me to any links that would be great.
thanks
Originally Posted by palmbeach05
CM10-10.2 is JB. CM11 is KK. Why you would flash KK gapps onto a JB build is extremely confusing.
That build is using the 3.1.10 kernel. To see that, go to options>about phone.
Boot logo and charging meter (as mentioned in my previous post) are related in terms of the kernel. Fix one, get a glitchy image on the screen for the other. Normal, and already discussed across all 3.1.10 kernel based roms.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
..."Why you would flash KK gapps onto a JB build is extremely confusing."... If you're confused then imagine how I feel Just kidding.
I am absolutely new to all this so apologies for my lack of familiarity. I'm flying by the seat of my pants here. I'm trying to catch on as I read posts around the place.
So as I read your feedback I should ;
a) upgrade the Recovery to 5.x or 6.x (not sure where to find these)
b) locate CM10-10.2 JB or CM 11 KK and use the appropriate gapps (JB or KK)
glitchy image doesn't worry me at all, I am just keen to get a V4.x of Android installed so I can use this phone for some other security development that needs Android 4.x, otherwise I have to splash out $150 to buy a new phone which I'm not keen on doing.
It would be nice also to have the fingerprint working on the upgraded version. I saw an addon for Beanstalk somewhere and the developer said that installing that apk would activate the finger scanner. That said, I don't really have much of an idea what I am talking about, just what I have gleaned reading postings. I am 59 years old and with a bunch of old school IT like IBM mainframes etc behind me but am new to all this upgrading of mobiles
If you could steer me to any links that would be great.
thanks
Click to expand...
Click to collapse
Its all good, we've all been there (being noobs i mean)
The 5.x recovery can be found by going to the general section, the thread that has may 16th in its title, and clicking a link in post #1
The 6.x recovery can be found in the new CM10.2 thread (the one not done by epinter)
This is the only Android phone with fingerprint technology (to the best of my knowledge). Most stable on 2.3.x, however it does work on 4.0.4, although its more hit or miss at that point. I've got my Atrix 4G still and i'm running AtrICS v2.0 (Nov 2012 build) with the home button fix and the latest kernel released by krystian (10 Feb (haven't checked development at the time of this post)). Fingerprint for me does work.
Beanstalk is a JB ROM, i believe based off of the old kernel (2.x). I don't recall if that one had the fp working or not.
If the 4G can't do what you need, the A2 and AHD, both which succeeded the 4G, are both available for under 150 on amazon (my AHD was 134 after tax and shipping)
Sent from my MB886 using xda app-developers app
palmbeach05 said:
Its all good, we've all been there (being noobs i mean)
The 5.x recovery can be found by going to the general section, the thread that has may 16th in its title, and clicking a link in post #1
The 6.x recovery can be found in the new CM10.2 thread (the one not done by epinter)
This is the only Android phone with fingerprint technology (to the best of my knowledge). Most stable on 2.3.x, however it does work on 4.0.4, although its more hit or miss at that point. I've got my Atrix 4G still and i'm running AtrICS v2.0 (Nov 2012 build) with the home button fix and the latest kernel released by krystian (10 Feb (haven't checked development at the time of this post)). Fingerprint for me does work.
Beanstalk is a JB ROM, i believe based off of the old kernel (2.x). I don't recall if that one had the fp working or not.
If the 4G can't do what you need, the A2 and AHD, both which succeeded the 4G, are both available for under 150 on amazon (my AHD was 134 after tax and shipping)
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Thanks for that info. A quick question - I see one of the Recovery versions says : CWM-Recovery 6 for Galaxy ACE GT-S5830. Does that mean it is specifically for that model and I need to find one that actually refers to the Atrix 4G MB860 ?
cheers
Good News ..... It's working.
It seems the issue might have been the Recovery app / version. After updating that to 5.x and reinstalling the OS it ran like a dream.
I started with AtrICS v2.0 as you indicated and that worked just fone although for some reason WiFi was not being detected.
I then reformatted etc and installed cm-10.1-20131211-UNOFFICIAL-epinter-olympus and it's all looking good, including fingerprint.
Thanks again for your help, much appreciated.
cheers
Krammig said:
Good News ..... It's working.
It seems the issue might have been the Recovery app / version. After updating that to 5.x and reinstalling the OS it ran like a dream.
I started with AtrICS v2.0 as you indicated and that worked just fone although for some reason WiFi was not being detected.
I then reformatted etc and installed cm-10.1-20131211-UNOFFICIAL-epinter-olympus and it's all looking good, including fingerprint.
Thanks again for your help, much appreciated.
cheers
Click to expand...
Click to collapse
Yes you did need to flash a CWM designed specifically for the A4G. AtrICS can be tricky, sometimes, but as long as you installed the main ROM, then the Vendor zip, you should get wifi. If you want to use the 3.1.10 kernel, flash the home fix zip thats in that thread, then upgrade the kernel as needed (highly recommended if you chose this option).
Glad to see you were able to upgrade, and no problem.
Sent from my MB886 using xda app-developers app
Q&A for Rebirth rom v1.0 [kitkat 4.4.4] note 4 porting
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Rebirth rom v1.0 [kitkat 4.4.4] note 4 porting. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Only thing that doesn't work for me is MMs but data, calls, regular texts work fine
This is cute
*Picture messaging
*WiFi Hotspot
*No stock Samsung keyboard "swyping"
*Some settings force close
*Swiping left or right corner (top) within an application causes auto reboot
*If in a application, tapping menu (recents) force closes the application you're in.
Sent from my Note 4 using XDA Premium.
Rebirth rom v1.0 Little Problem.
Hello Everybody,
I have a Samsung Galaxy Note 3 from Sprint, i wanted to install this room, the only problem is that i did it and it just got stuck on the boot logo it just shows the Splash Screen of Galaxy Note 3. I recently updated my baseband from MI3 to NH7 everything was working fine, now i just tried to install this room and i just messed up my phone. Need help!
arbarof said:
Hello Everybody,
I have a Samsung Galaxy Note 3 from Sprint, i wanted to install this room, the only problem is that i did it and it just got stuck on the boot logo it just shows the Splash Screen of Galaxy Note 3. I recently updated my baseband from MI3 to NH7 everything was working fine, now i just tried to install this room and i just messed up my phone. Need help!
Click to expand...
Click to collapse
Pull battery and reinstall boot into recovery. If you are running a stock recovery hopefully you have backed up your data somewhere, then do a factory reset. If you are running a custom recovery do a backup restore.
Works Charm!
jimzweb1 said:
Pull battery and reinstall boot into recovery. If you are running a stock recovery hopefully you have backed up your data somewhere, then do a factory reset. If you are running a custom recovery do a backup restore.
Click to expand...
Click to collapse
Hello again, I have to notice for everybody who experiments ramdon BootLoops. You have to be on NC5 Bootloader First, you can try looking for the NC5 Bootloader Engineering One Click Method is the one that i used, then i reinstalled the room. and it worked perfect. I dont know why but most of the people is having DATA issues, i have to say that from the first boot my phone got a preconfigured APN, working on 3G and 4G speeds.
does anyone hav alternative link?
Sent from my SM-G900P using XDA Free mobile app
Scrapbook
How do i fix scrapbook it's not working for me. The app will not save anything?
arbarof said:
Hello again, I have to notice for everybody who experiments ramdon BootLoops. You have to be on NC5 Bootloader First, you can try looking for the NC5 Bootloader Engineering One Click Method is the one that i used, then i reinstalled the room. and it worked perfect. I dont know why but most of the people is having DATA issues, i have to say that from the first boot my phone got a preconfigured APN, working on 3G and 4G speeds.
Click to expand...
Click to collapse
Random bootloops don't exist as a bootloop (keyword random) consists of the system rebooting itself consistently over and over without getting into the system itself which isn't random.
On the other hand, I assume you're talking about random reboots which occur when pulling the status bar from the top left or right corner within an application (as I've narrowed this down on this particular Rom) or digging into the system before the system does its first vibrate once online.
I'm on Sprint, most Sprint users did not have DATA when first time flashing, as I posted on page 3 post #26 how to configure your APN to get sms/mms etc.
I hope I clarified somethings for looking eyes.
Hey will this work for sm n900p sprint note 3
Sent from my SM-N900P using XDA Free mobile app
That happened to me all I did is killed the battery, take it out and remove it from your phone and put the battery back in and plug it to your computer and put it back in download mode and root your phone back to stock, it worked for me. I thought I hard brick my sprint note 3
Sent from my SM-N900P using XDA Free mobile app