Related
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
have you checked md5sum: e9c809385764bc6083616ce8cd5b0f36?
once downloaded, it should have the same md5..
wow.. size: 150.21mb? that's pretty lite
Tequila6808 said:
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
Click to expand...
Click to collapse
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
thats not a rom ma8, but a kernel to root ur phone first, so that u can install any custom rom of ur choice
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
You know, after flashing a new rom booting may take some more time, at least a few minutes. Have you been waiting enough time?
First, check md5sum of ROM [what Saywhatt wrote a few posts back]
a. If you are no longer in recovery modes then you can get a kernel [tar file] Flashing with Odin.
If your phone then starts normally, then flash the ROM you want through CWM.
*** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
b. If you can get into recovery mode, not flash with Odin, but do these same steps;
**** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
PS. If it fails in step a first flash stock ROM with Odin
sorry for my bad english
saywhatt said:
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
Click to expand...
Click to collapse
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
andyzeng1993 said:
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
Click to expand...
Click to collapse
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
I flashed this
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x).
Hawker's GS2Wiper download."
Under this link " http://androidforums.com/galaxy-s2-...804-dorimanx-kernel-ics-jb-dummies-guide.html "
andyzeng1993 said:
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Click to expand...
Click to collapse
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Tequila6808 said:
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Click to expand...
Click to collapse
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
andyzeng1993 said:
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
Click to expand...
Click to collapse
Reflash Rom without wipe and wipe cache.Or try another Rom.
Tequila6808 said:
Reflash Rom without wipe and wipe cache.Or try another Rom.
Click to expand...
Click to collapse
any rom you suggest?
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
Yeah stock 4.0.3 and leave it at that.
I dont think you are cut out for all this modding
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1569686
Hi lads, i have huge problem with my i9100, so i wanna make some steps to make it better.
I have installed CM11 with CWM v6.0.4.7
When i try to make - wipe data factory-reset, CWM give me error E:unknown volume for path [/sd-ext]
When i try to format /preload CWM give me error E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p12 Error formatting /preload!
Something is not right.
I need to clear everything and start from beginning, I was thinking about installing a new krenel, then install some three file rom by ODIN.
What do you think ?
What should i do ?
Thanks in advence ..
Anyone ?
uefi said:
Hi lads, i have huge problem with my i9100, so i wanna make some steps to make it better.
I have installed CM11 with CWM v6.0.4.7
When i try to make - wipe data factory-reset, CWM give me error E:unknown volume for path [/sd-ext]
When i try to format /preload CWM give me error E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p12 Error formatting /preload!
Something is not right.
I need to clear everything and start from beginning, I was thinking about installing a new krenel, then install some three file rom by ODIN.
What do you think ?
What should i do ?
Thanks in advence ..
Click to expand...
Click to collapse
change the recovery and then try
bhavstech said:
change the recovery and then try
Click to expand...
Click to collapse
What do you mean ?
I use kernel_settings_wipe and kk-kernel-09-02-CWM from this site.
Then i flash OMNI 4.4 with GAPPS from this site.
The i get back to Cyanogenmod11 with GAPPScore.
But still i have same problems.
uefi said:
What do you mean ?
I use kernel_settings_wipe and kk-kernel-09-02-CWM from this site.
Then i flash OMNI 4.4 with GAPPS from this site.
The i get back to Cyanogenmod11 with GAPPScore.
But still i have same problems.
Click to expand...
Click to collapse
use a recovery with lower version cwm 6.0.3.x bcoz cwm has problems in kitkat
bhavstech said:
use a recovery with lower version cwm 6.0.3.x bcoz cwm has problems in kitkat
Click to expand...
Click to collapse
Will you give me a link to the correct CWM ? Thanks
uefi said:
Will you give me a link to the correct CWM ? Thanks
Click to expand...
Click to collapse
Flash philz kernel... It has cwm touch... And also a single click option to wipe everything...
Edit
Remember u wont be able.to directly install kitkat zip wid any cwm version less than 6044 ...just let me know are u able to do a complete wipe wid philz cwm touch
doctor_droid said:
Flash philz kernel... It has cwm touch... And also a single click option to wipe everything...
Edit
Remember u wont be able.to directly install kitkat zip wid any cwm version less than 6044 ...just let me know are u able to do a complete wipe wid philz cwm touch
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1877270
this will be correct?
-deleted
Allright, i swich to another dev 4.3 for now.. Everything work's greate.
I stay away from 4.4 for next 2 months, then i try ..
please accept my noobness !!
i'm using CWM v6.0.4.6 (i even face the same problem using TWRP) ..
i tried to install different types of kitkat roms including (carbon,slimkat,omni,resurrection),they all pass installation process and never pass boot animation !! it just sticks in the boot animation with no further progress...i wait for about 20 mins but nothing happens !!
please note that this problem started to arise after using aroma installer to install archiedroid rom based on stock -which is the only rom which works at the moment!!
i've tried to factory reset-wipe cache-wipe dalvik-removing memory card after flashing each rom !!
any reply will be highly appreciated!! thanks in advance
Format before flashing in mounts and storage...
System
Data
Cache
Flash ROM
Flash 4.4.2 gapps
Reboot.
I use cwm 6.0.4.4 and have no problems. YOU WILL LOOSE DATA SO BACK UP :thumbup::thumbup:
andrewwright said:
Format before flashing in mounts and storage...
System
Data
Cache
Flash ROM
Flash 4.4.2 gapps
Reboot.
I use cwm 6.0.4.4 and have no problems. YOU WILL LOOSE DATA SO BACK UP :thumbup::thumbup:
Click to expand...
Click to collapse
okay thanks!! i'm gonna give it a try and tell you what happened !!
andrewwright said:
Format before flashing in mounts and storage...
System
Data
Cache
Flash ROM
Flash 4.4.2 gapps
Reboot.
I use cwm 6.0.4.4 and have no problems. YOU WILL LOOSE DATA SO BACK UP :thumbup::thumbup:
Click to expand...
Click to collapse
it didn't work !! can it be something wrong with the firmware or so....??? what shall i do ??
Use philz recovery.
And before flashing a ROM use the option to clean to install a new ROM.
Or just wipe preload.
I had that once and it happened because i had a swapfile on preload
Enviado do meu GT-I9300 através de Tapatalk
Philz I don't like. I once wiped for new ROM and it wiped recovery too. Never used it since. Check md5 of ROM also using right gapps?? Preload can sometimes need a wipe. Also int sd card could too cause problems so wiping that could help to.
SnowPluralism said:
Use philz recovery.
And before flashing a ROM use the option to clean to install a new ROM.
Or just wipe preload.
I had that once and it happened because i had a swapfile on preload
Enviado do meu GT-I9300 através de Tapatalk
Click to expand...
Click to collapse
formatting /preload
E : format_volume : make_extf4fs failed on /dev/block/mmcblk0p10
error formatting /preload!
that's what showed up !
andrewwright said:
Philz I don't like. I once wiped for new ROM and it wiped recovery too. Never used it since. Check md5 of ROM also using right gapps?? Preload can sometimes need a wipe. Also int sd card could too cause problems so wiping that could help to.
Click to expand...
Click to collapse
i checked MD5,it matched !!
i even tried to switch it on without flashing GAPPS,still same thing...as mentioned before only roms such as archidroid and SPR rom both based on stock samsung touchwiz and install using aroma!! other than that.... BOOT animation loop !!!!!
SnowPluralism said:
Use philz recovery.
And before flashing a ROM use the option to clean to install a new ROM.
Or just wipe preload.
I had that once and it happened because i had a swapfile on preload
Enviado do meu GT-I9300 através de Tapatalk
Click to expand...
Click to collapse
you're a genius !!!! philz recovery did work !!! i simply pressed "clean to install a new rom" it worked like magic !!! thanks again !!
That good that it did that in preload.
S3 doesn't use preload but sometimes you may find something in there. You have two choice's either wipe int SD and flash ROM from ext sd or flash stock with odin which wipe wipe anyway. Back up int SD to PC or ext SD. So format sd then format system data cache then flash ROM/gapps. If no joy Odin flash will be a must. I think this will be something on you're int SD not allowing you to flash the ROM. This does happen with int SD as this has happened to me. @tarzan pointed this out,said format int then flash and had no problems since. Also use cwm 6.0.4.4 as I know this works well with tw or custom ROMs.
andrewwright said:
Philz I don't like. I once wiped for new ROM and it wiped recovery too. Never used it since. Check md5 of ROM also using right gapps?? Preload can sometimes need a wipe. Also int sd card could too cause problems so wiping that could help to.
Click to expand...
Click to collapse
thanks alot !! and sorry if i was annoying !
Is it sorted now?
andrewwright said:
Is it sorted now?
Click to expand...
Click to collapse
yep,finally !! i flashed two roms in a row,lol !! thanks for help !
I do not know why, but philz recowery is best for all
I have very good results with the restoration and backup.
at my absolute best, it's my opinion
ahmedshazly said:
yep,finally !! i flashed two roms in a row,lol !! thanks for help !
Click to expand...
Click to collapse
Please add solved to the title of the thread to help others out. :thumbup:
andrewwright said:
Please add solved to the title of the thread to help others out. :thumbup:
Click to expand...
Click to collapse
DONE !!:good:
Thank you very much for sharing Philz recovery. It solved my quite frustrating problem in mounting & formatting the /preload partition. I can now install a custom rom again.
Hello guys. Yesterday I've installed CM11 Build 01/08. Then it was succesful, after that I tried to back to stock rom. But it's failed when formatting data after flashing on Odin.
The message on stock recovery is: "E:failed to format /data... dev/block/11 Invalid argument" NB: I'm not remember all the message.
Help me
UPDATE:
My error message : E:format_volume: rfs format failed on /dev/stl111
Hope this help!
yusrilramadhan said:
Hello guys. Yesterday I've installed CM11 Build 01/08. Then it was succesful, after that I tried to back to stock rom. But it's failed when formatting data after flashing on Odin.
The message on stock recovery is: "E:failed to format /data... dev/block/11 Invalid argument" NB: I'm not remember all the message.
Help me
Click to expand...
Click to collapse
Do wipes in reovery then flash wipe package of Firmware .
Hitesh2626 said:
Do wipes in reovery then flash wipe package of Firmware .
Click to expand...
Click to collapse
Done. But my phone still get bootlop. On stock recovery I can't format /data
yusrilramadhan said:
Done. But my phone still get bootlop. On stock recovery I can't format /data
Click to expand...
Click to collapse
Are you sure that you flashed wipe package not non wipe package ?
Because with that it formats all to RFS.
Hitesh2626 said:
Are you sure that you flashed wipe package not non wipe package ?
Because with that it formats all to RFS.
Click to expand...
Click to collapse
Actually, I don't know what is wipe package.
yusrilramadhan said:
Actually, I don't know what is wipe package.
Click to expand...
Click to collapse
Download Firmware from Sammobile and split it while spliting make there wipe package , follow TUT 's http://forum.xda-developers.com/showthread.php?t=1840645
Hitesh2626 said:
Download Firmware from Sammobile and split it while spliting make there wipe package , follow TUT 's http://forum.xda-developers.com/showthread.php?t=1840645
Click to expand...
Click to collapse
I've try it 3times. Still cannot wipe /data
Sent from my GT-S5830i using Tapatalk 2
Problem solved.
Sent from my GT-S5830i using Tapatalk 2
I'm having same problem. How did you fix?
yusrilramadhan said:
Problem solved.
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
I have the same problem. how did you solve please
mstfymrtc said:
I'm having same problem. How did you fix?
Click to expand...
Click to collapse
kpugh162 said:
I have the same problem. how did you solve please
Click to expand...
Click to collapse
Flash using Odin with this rom.
http://forum.xda-developers.com/showthread.php?p=54695210
Sent from my GT-S5830i using Tapatalk 2
i have samsung s2 GT-I9100, version of 4.2.2, I9100XXMS2, im using Omega v13 rom, i want to change it to cm11 kitkat version, i dont know the steps, i cant just flash it using cwm 6.4, always says aborted, cant open the zip file of cm11 pls help TIA
yrragarry said:
i have samsung s2 GT-I9100, version of 4.2.2, I9100XXMS2, im using Omega v13 rom, i want to change it to cm11 kitkat version, i dont know the steps, i cant just flash it using cwm 6.4, always says aborted, cant open the zip file of cm11 pls help TIA
Click to expand...
Click to collapse
First make a rom backup of your 4.2.2 incase if something goes wrong and you want to restore back.
Then download the latest recovery version, twrp or cyanogenmod
Download cm11
Flash the newest recovery,
Reboot into recovery
Format data/factory reset
Wipe /system
Wipe /dalvik-cache
Flash cm11
Flash kitkat gapps
Reboot.
Enjoy cm11.
The reason why you need latest recovery is because cm11(kitkat) needs selinux enabled recoveries, else it will say something like aborted, set_metadata_recursive failed.
Goodluck with flashingcm11!
wulsic said:
First make a rom backup of your 4.2.2 incase if something goes wrong and you want to restore back.
Then download the latest recovery version, twrp or cyanogenmod
Download cm11
Flash the newest recovery,
Reboot into recovery
Format data/factory reset
Wipe /system
Wipe /dalvik-cache
Flash cm11
Flash kitkat gapps
Reboot.
Enjoy cm11.
The reason why you need latest recovery is because cm11(kitkat) needs selinux enabled recoveries, else it will say something like aborted, set_metadata_recursive failed.
Goodluck with flashingcm11!
Click to expand...
Click to collapse
tnx for the reply sir, but i already tried this way for many times, the file cm11 nightly always aborted,not continuing the updating, is there any ways or steps?
yrragarry said:
tnx for the reply sir, but i already tried this way for many times, the file cm11 nightly always aborted,not continuing the updating, is there any ways or steps?
Click to expand...
Click to collapse
Is it corrupt maybe?
Did you downloaded cyanogenmod for the right device?(Probably you have but just in case)
Are you really using the latest recovery?
Better way, what error does it shows, why does it aborts.
yrragarry said:
tnx for the reply sir, but i already tried this way for many times, the file cm11 nightly always aborted,not continuing the updating, is there any ways or steps?
Click to expand...
Click to collapse
YOu need to first install Kitkat compatible cwm recovery to install kitkat rom in i9100 .. So first download i9100kitkat compatable recovery (google the same to find it) flash it via odin or normal and reboot recovery now .. Now you can full wipe, wipe cache data partitions format system and flash the laest cm11 + gapps with out any problems