Ok so im realtively new to working on android phones, just got an atrix, rooted fine, superuser and all bootloader unlocked and stuff, booted into clockwork mod for the first time.
When i did this i clicked on "install update from SD card", chose Greyblur as a test rom cause i seen it on the guide to flash roms, so i followed what they did exacly, when i installed it, i went straight to the "reboot" button, clicked reboot and when it did it wont go past the Dual Core Technology screen, please help me android atrix veterans! i dont have insurance and ive been searching for about a week now, im really scared that im royally screwed, i bought accessories for the phone and want to use them on a non-soft bricked phone!
Please and thanks!
1. Install Romracer's cwm
2. Greyblur is a pseudo-rom, try any rom at the top in the development forum instead. I'm using Nottach's Dark Side right now, it's crazy fast and is very stable.
i have cwm, the problem is i just cant get booted into it without getting on my phone, and launching it via an app i have, is there a way to get on the CWM recovery without an app? cause when i click android recovery it takes me to the stock recovery
Ok, sounds like you installed Tenfar's OLD clockwork recovery, which was only a 'bootstrap' recovery.
What you need to do is, try getting into recovery by doing this:
power off.
press and hold power and vol down buttons until you see 'fastboot' appear on screen. press vol down 7 times until you see 'android recovery' and press vol up key.
This may or may NOT work since you installed the boostrap recovery from Tenfar.
If it DOES work. Do a factory reset. and reboot. See if its fixed.
If not do this:
Download RomRacers Recovery and flash via Fastboot
then do the same button commands to get into Recovery and try to factory reset again.
If none of that works, PM me with your information, such as Android version (froyo, gingerbread, etc etc) and I'll get you sorted.
how do i use fastboot? do i need a program or something on my computer? never touched fastboot before i dont think
Hey i have a similar problem my phone was rooted and an unlocked bootloader using the automatic unlocker and i went to install a rom i believe it was called unofficial aroma rom by th3 bill i went to install it from tenfars cwm and i wiped every thing first and when i went to install the rom it finished in like 5 seconds i pretty new to all this but i thought something was up when it rebooted it wont go past the dual core screen so i went and looked around and found that it could be a kernel issue or a recovery be outdated issue since when i tried to restore my back up on tenfars it still wouldn't go past the dual core screen i then put olmypus cwm on it to see if that wont fix it but i guess that made it worse cus now when i went to go restore I it says error mismatch mdsum so yeah i looked around and read that i can return to stock by flashing a fruitcake but before i did that i thought i should make sure first.hope you guys can help
daftvirus7749 said:
Ok so im realtively new to working on android phones, just got an atrix, rooted fine, superuser and all bootloader unlocked and stuff, booted into clockwork mod for the first time.
When i did this i clicked on "install update from SD card", chose Greyblur as a test rom cause i seen it on the guide to flash roms, so i followed what they did exacly, when i installed it, i went straight to the "reboot" button, clicked reboot and when it did it wont go past the Dual Core Technology screen, please help me android atrix veterans! i dont have insurance and ive been searching for about a week now, im really scared that im royally screwed, i bought accessories for the phone and want to use them on a non-soft bricked phone!
Please and thanks!
Click to expand...
Click to collapse
did you reaaly install it? i mean you should instead select install zip from sd card (not install update).....and do a wipe to factory it helps.....
hope it helps
htchd2fix said:
did you reaaly install it? i mean you should instead select install zip from sd card (not install update).....and do a wipe to factory it helps.....
hope it helps
Click to expand...
Click to collapse
i mean i dont know since it was my first rom but it took like 5 secs and. Did choose install from sd card and i wiped delvik cache,and data.
no install take 5secs. download again your rom in pc
go in recovery
wipe factry reset
go in mount
mount usb
transfer your rom torugh usb into phone sd card ext
when done unmount
go back to install zip from sd card
select your rom
when done reboot
htchd2fix said:
no install take 5secs. download again your rom in pc
go in recovery
wipe factry reset
go in mount
mount usb
transfer your rom torugh usb into phone sd card ext
when done unmount
go back to install zip from sd card
select your rom
when done reboot
Click to expand...
Click to collapse
alright so i did what you said and I'm just guessing the rom just doesnt work for my phone cuz it installed in 5 secs again and i installed a previous version of the rom and it didn't work as well it took me to a rom setup screen like asking me what i want to wipe and what memory to use and then installed pretty quick as well and it didn't boot past the dual core i then whent ahead and flashed the fruit cake rom which is pure stock 1.4.1 and now my phone works...i now have a couple questions do you think it would be smart to back up this rom and keep it as my back up even though its not my real original stock rom? my original one doesn't work it gets a md5 mismatch error or something and doesn't restore.i read some where that tenfars recovery doesnt back u roms properly and that might me why because that what i backed up on should i install rom racer recovery i read that that one is specifically for the atrix if should can you explain how to do that?lastly i stil want to put a custom rom on my phone because the whole reason i did this was because i found out i wasn't getting ics but
each of the two roms i installed never booted up and the only one that worked was the fruit cake do you know a good stable rom to use preferably ics or jellybean?i was also looking into the neutrino v2.9 rom but the linked is down and you need rom racer to install if you cant answer anything i asked please do thanks so far though
daftvirus7749 said:
Ok so im realtively new to working on android phones, just got an atrix, rooted fine, superuser and all bootloader unlocked and stuff, booted into clockwork mod for the first time.
When i did this i clicked on "install update from SD card", chose Greyblur as a test rom cause i seen it on the guide to flash roms, so i followed what they did exacly, when i installed it, i went straight to the "reboot" button, clicked reboot and when it did it wont go past the Dual Core Technology screen, please help me android atrix veterans! i dont have insurance and ive been searching for about a week now, im really scared that im royally screwed, i bought accessories for the phone and want to use them on a non-soft bricked phone!
Please and thanks!
Click to expand...
Click to collapse
go back into recovery by pressing volume down while it's turning on. Then mount sd storage (from recovery) and past into your sdcard an other better rom).Unmount when transfer is complete. WIPE ALL: factory reset, cache and dalvik cache. Install the zip from sdcard. Enjoy
Try formatting data and cache. Format options should be under advanced - mount menu. After formatting your data and cache go to install zip from sdcard and install the new rom. Do wipe data, cache and dalvik cache.
Sent from my Atrix using xda-developers app
This happened to me too, I flashed an up to date cwm and flashed the JB ROM again and that solved my issue, its a strange one!
Sent from my MB860 using xda app-developers app
Been there done that
Been there done that. I was stuck at the M logo for days about a week ago. Couldn't figure it out. Check out my thread here http://forum.xda-developers.com/showthread.php?t=1936337 for how I solved it with help from this forum.
Good luck, I am on epinters latest and greatest CM10 now and it is grand!
I've taken on a bit more than qualified I guess as I rooted my att GS3 just fine and flashed a new aokp rom and was up and running but started to have intermitent flickering. It prompted me to reflash rom with CM10 and this is were my problems began. I wiped data/factory reset, cache partition,Dalvik cache, mounts & storage format cache, and accidentally format emmc which I think is my problem. I was able to still reboot to CWM recovery but I can't do much more than that, and now I can't get to CWM recovery mode at all. Have tried to boot and reflash from ex/sdcard no good. PC doesn't recognize phone to do recovery from backup and I didn't do internal backup which I now know was dumb. Is there anything I can do to get back up and running or did I screw myself and have to get a new phone? PLEASE HELP HELP HELP!!!!!!!!!
Buddy... first your phone is ATT GS3. and this forum is for INTERNATIONAL GS3. so if you flashed the rom downloaded from THIS forum than might be possible... the correct forum for your device is here:
http://forum.xda-developers.com/forumdisplay.php?f=1705
I hope and pray your phone will be ok... I love this device...
Okay... So I have a bit of an issue here that I hope I can get resolved really quickly. I got an HTC Evo 4G LTE and decided I wanted to root it in a fairly short amount of time. I previously had a Samsung Galaxy S3 which I rooted and I have a Nexus 7 tablet which is rooted, so I'm not necessarily new to the process. I followed all the normal steps.
However, whenever it came to installing twrp I thought it would be better to install cwm, so I switched the recovery image files. This worked for the time being and I was able to boot into recovery without a problem. I booted into recovery successfully and was able to wipe everything that needed wiping, but since this is a new phone I didn't think it would be necessary to back up anything, so I skipped that step. After wiping the dalvik cache, sys cache and did a data/factory reset I went to install CyanogenMod 11 (since I wanted android 4.4 on my Evo). When it went to install the mod the phone gave me a "status 7" error message. I tried again to no avail. So I thought it was because I had installed cwm instead of twrp. So I went ahead and flashed twrp onto the phone. No dice, twrp didn't even work. So I flashed a stock rom, didn't work either. So I re-flashed cwm onto the device and now it won't go past the recovery stage. i.e. when I try to power on the phone it goes directly into recovery, I boot into the "power+volume down" mode and it doesn't help at all. So I'm kind of stuck at this point and not sure what to do. I cannot access the internal files of the phone and I would really like to get it working by tomorrow or the next day.
Thanks for your time.
Look HERE
In addition to what Bigdaddy posted, you need to use TWRP recovery, not CWM. CWM doesn't play well with the misc partition on the EVO LTE. I also suggest reading the Hboot guide in my sig for some useful information. Once you get your phone up & running, you will need to fix your misc partition.
Sent from my HTC EVO 4G LTE
i have a lg optimus g e970 . it originally had cm11 on it and i wanted to put stock rom on it so i downloaded the rom and put it on the extsd card. i have used twrp before and installed many roms throu twrp, so i went and wiped everything delvik cache and data. i then rebooted the phone back into twrp to install the rom and it is then that i noticed that twrp doesnt recognize or detect that i have extsd card. so now i have no os on my og. i can get into recovery, download mode, and i can boot system till it get to the lg logo then stays there. i don't know how to put firmware back on the phone. im a noob when it comes to lg's. i know twrp but not lg. plzzzzzz help............
thanks and appreciation your way
Hi everyone, I am new here but have been an active user over on Crackberry for many years.. Here's my story
I have a galaxy S4 (SGH-i377m)
Rooted via Odin.
Android 5.0.1
Just recently (since buying my Priv) I decided to flash stock marshmallow. I found gapps and the rom that was compatible.
I restarted into recovery (twrp) and made a backup, I then moved the backup recovery to my desktop computer so it wouldn't take room on my phone. I then moved my new rom, gapps, and Subeta, to my phone internal storage, wiped phone, dalvik, flashed all 3 zips but the rom failed to install. I tried everything, unfortunately formating the phone, currently have no operating system and the phone is stuck on the boot screen.
The phone is also not discoverable by my desktop so flashing the recovery wasn't possible.
I have since moved recovery from desktop to media card and flashed off the media card, that failed.
After many tries and wipes and formatting I decided to try CWM. Using CWM everything flashed but my recovery. Again, phone is stuck on boot screen.
I really don't know where to go from here.
Any help would be much appreciated!
Thanks
Brent