Hello all
I try some Rom such as JellyBlast, SGS3 and Simplicty 5.2
and now I want return to original rom
1- I download Stock5830i and extract to 4 file
2- open Odin and put file in program PDA, Modem, Phone and boot
3- open phone in recover mode
here problem when login to recover mode some driver not found and I install again some Ver. from Samsung driver 1.XX.XX and kiss again but nothing for any thing
Attachment pic from error
And before install any rom I can login in kiss and browse contact, photo and all phone, but after install any rom above kiss popup "unable to retrieve phone 5830i information"
some information for my phone
Service Mode
*2767*4387264636#
1- sellout SMS: OFF
2- PCode: GT-S5830OKIEGY
3- Mode: Test
PHONE PDA CSC versions
*#1234#
1- PDA: S5830iXXLI1
2- PHONE: S5830iXXLA1
I want original rom for this phone and support arabic
and you good if give me the rom one file to install from SD without Odin
ahmed_atoon said:
Hello all
I try some Rom such as JellyBlast, SGS3 and Simplicty 5.2
and now I want return to original rom
1- I download Stock5830i and extract to 4 file
2- open Odin and put file in program PDA, Modem, Phone and boot
3- open phone in recover mode
here problem when login to recover mode some driver not found and I install again some Ver. from Samsung driver 1.XX.XX and kiss again but nothing for any thing
Attachment pic from error
And before install any rom I can login in kiss and browse contact, photo and all phone, but after install any rom above kiss popup "unable to retrieve phone 5830i information"
some information for my phone
Service Mode
*2767*4387264636#
1- sellout SMS: OFF
2- PCode: GT-S5830OKIEGY
3- Mode: Test
PHONE PDA CSC versions
*#1234#
1- PDA: S5830iXXLI1
2- PHONE: S5830iXXLA1
I want original rom for this phone and support arabic
and you good if give me the rom one file to install from SD without Odin
Click to expand...
Click to collapse
hi there,
In order to unbrick your device or to Rivert back to stock you actually gotta use Download Mode(volume up+volume down+power) not Recovery mode.....by the way if you got any doubt in future then ask it in the Q&A section......Good luck
R.P.T.D
U had to install proper drivers before usinf odin. As seen in the picture your pc did not recognized your phone yet. After installing drivers you can use odin to flash stock rom.
Ps. U can use kies or samsung adb drivers for download mode.
:: Freedom... ::
Related
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
ShogunSam said:
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
Click to expand...
Click to collapse
I also received the same message and downloaded the update file. when ask to Reboot & Install i selected install the device booted in CWM and i selected update from .zip and selected the downloaded file in OTA Download Folder.
The update was successful, yet the ROM looks in BETA version.
Following are the issues i am currently facing in the updated ROM
1. Gallery ICS was Force Closed, later it was solved via uninstalling update.
2. Quick Panel, Nemesis Hub, Nemesis Owner Info & Nemesis Sound Boosters are giving FC messages.
3. OTA is giving INVALID ROM Message while updating.
I´m having the same issues.
After downloading and installing the OTA update, my device is keep stucking in the boot loop.
When I do to the recovery, I always get automatic update with the update.zip, which means I can't get into the full recovery to select another functional image.
Well I hope it's not bricked. Is there a sollution?
Thanks
I have repaired that throught ODIN MODE, like described here:
http://forum.xda-developers.com/showthread.php?t=1921421&highlight=s5300
ShogunSam said:
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
Click to expand...
Click to collapse
I have the exact problem. I just can not do anything.No connection to PC I dont know what to d.o Did you solve the problem ShougunSam?
I get the exact same error, and its annoying because I cant use my phone! If anyone can help us.. thanks
Rawhabbero said:
I get the exact same error, and its annoying because I cant use my phone! If anyone can help us.. thanks
Click to expand...
Click to collapse
For all the SGY Users who are facing issues after updating Jellyblast 3.5 to Nemesis (I faced it too) here is the guide to recover your phone:-
First to repair your phone you have to flash stock rom via odin .
Here's the guide for Flashing Stock Rom via Odin
Requirement: 1. A Samsung Galaxy y phone model gt-s5360.
2. A computer running on windows xp, vista, win7 or win8 with proper USB driver installed to connect your phone to computer {If you have not installed USB Driver for Samsung Galaxy Y then to Install USB Driver}
3. Stock Rom file : you can download stock rom according to your choice and region from the xda thread http://forum.xda-developers.com/showthread.php?t=1465800e
4. download ODIN: 1 .85.(google it as i cannot post outside links)
Installation Instruction : [ Charge your phone battery min 80%]
1. Download the required file Odin AND Stock Rom. zip and place in a folder on your desktop .
2. Now extract both with any file extractor.-- Odin v1 .85 .zip and the stock rom zip( file which contains the stock rom i. e 2 .3 .6 )
After that extract Stock Rom file after unzipping you will get three files :
PDA _S5360 _DDLK2.tar,
MODEM_ S5360 _DDLK2.tar &
CSC_S 5360 _DDLK2 .tar
3. Now turn off your Galaxy Y {Remove the battery for 5 -10 seconds and insert it back }
4. Go to Download Mode by Pressing Volume down + Home + Power for 5- 10 sec to boot in Download Mode
5. Now you entered in Download mode select continue by pressing Volume up button .
6. Now attach/ connect your phone to computer via USB cable .
7. Now on your computer open Odin v 1 .85. exe
8.Now make sure you are getting yellow box in ID:COM ( this means that your device is now connected and detected by odin )
9.Now Select those 3 files u download before
PIT - "totoro_0623.pit"
BOOTLOADER - "BOOT" file.
PDA - "PDA" file.
PHONE - "MODEM" file.
CSC - "GT-s5360- MULTI-CSC" file.
10.Now clik on start .
And let be ODIN do its work and wait till you see PASS in green colour it mean the flashing process is complete successfully . Samsung
11.Remove your phone from pc 12.Galaxy Y will auto reboot .
Now if you want to install nemesis Rom, you have to install the nemesis Rom 2.0 (Nemesis Titanium) first and than you should update the Rom by downloading the update file via OTA and flashing the zip file through CWM.
I hope my suggestion will solve your problem.
Did you wipe data and wipe catch before installing ROM??
Did you try flashing original ROM with Odin or others??
---------- Post added at 07:53 PM ---------- Previous post was at 07:48 PM ----------
chaos titan said:
did you wipe data and wipe catch before installing rom??
did you try flashing original rom with odin or others??
Click to expand...
Click to collapse
plz reply
thanks
thepain20 said:
For all the SGY Users who are facing issues after updating Jellyblast 3.5 to Nemesis (I faced it too) here is the guide to recover your phone:-
First to repair your phone you have to flash stock rom via odin .
Here's the guide for Flashing Stock Rom via Odin
Requirement: 1. A Samsung Galaxy y phone model gt-s5360.
2. A computer running on windows xp, vista, win7 or win8 with proper USB driver installed to connect your phone to computer {If you have not installed USB Driver for Samsung Galaxy Y then to Install USB Driver}
3. Stock Rom file : you can download stock rom according to your choice and region from the xda thread http://forum.xda-developers.com/showthread.php?t=1465800e
4. download ODIN: 1 .85.(google it as i cannot post outside links)
Installation Instruction : [ Charge your phone battery min 80%]
1. Download the required file Odin AND Stock Rom. zip and place in a folder on your desktop .
2. Now extract both with any file extractor.-- Odin v1 .85 .zip and the stock rom zip( file which contains the stock rom i. e 2 .3 .6 )
After that extract Stock Rom file after unzipping you will get three files :
PDA _S5360 _DDLK2.tar,
MODEM_ S5360 _DDLK2.tar &
CSC_S 5360 _DDLK2 .tar
3. Now turn off your Galaxy Y {Remove the battery for 5 -10 seconds and insert it back }
4. Go to Download Mode by Pressing Volume down + Home + Power for 5- 10 sec to boot in Download Mode
5. Now you entered in Download mode select continue by pressing Volume up button .
6. Now attach/ connect your phone to computer via USB cable .
7. Now on your computer open Odin v 1 .85. exe
8.Now make sure you are getting yellow box in ID:COM ( this means that your device is now connected and detected by odin )
9.Now Select those 3 files u download before
PIT - "totoro_0623.pit"
BOOTLOADER - "BOOT" file.
PDA - "PDA" file.
PHONE - "MODEM" file.
CSC - "GT-s5360- MULTI-CSC" file.
10.Now clik on start .
And let be ODIN do its work and wait till you see PASS in green colour it mean the flashing process is complete successfully . Samsung
11.Remove your phone from pc 12.Galaxy Y will auto reboot .
Now if you want to install nemesis Rom, you have to install the nemesis Rom 2.0 (Nemesis Titanium) first and than you should update the Rom by downloading the update file via OTA and flashing the zip file through CWM.
I hope my suggestion will solve your problem.
Click to expand...
Click to collapse
IT STILL DOES NOT WORK! I flashed the device, and this is what i get every time! WHAT AM I DOING WRONG?
i have been following steps in this thread http://forum.xda-developers.com/showpost.php?p=33305784&postcount=2&nocache=1&z=5264202383282762
phone is constantly in download mode, and odin program looks like this https://www.dropbox.com/s/3mlc1ogy3ltxwgi/Screenshot 2014-07-18 15.08.09.png
i left it alone for over half an hour and tried multiple times putting auto reboot on and off. Any advice?
i also tried a different port, using the original cable, developer mode, reinstalled drivers, and tried an older version of odin... nothing seems to work
even Kies can't connect to my phone
Try This
darkmayhem said:
i also tried a different port, using the original cable, developer mode, reinstalled drivers, and tried an older version of odin... nothing seems to work
even Kies can't connect to my phone
Click to expand...
Click to collapse
Try This....http://forum.xda-developers.com/galaxy-s3/help/root-s3-whitout-count-binary-t2820855
darkmayhem said:
i have been following steps in this thread http://forum.xda-developers.com/showpost.php?p=33305784&postcount=2&nocache=1&z=5264202383282762
phone is constantly in download mode, and odin program looks like this https://www.dropbox.com/s/3mlc1ogy3ltxwgi/Screenshot 2014-07-18 15.08.09.png
i left it alone for over half an hour and tried multiple times putting auto reboot on and off. Any advice?
Click to expand...
Click to collapse
hey mate. Use chairfire autoroot to root your s3.
I used it too to root my phone. It is best way.
Just goto chaifire website (google it) -> download the autoroot for your variant -> download Odin (I think it come inside autoroot zip) -> extract the zip -> you will find a .tar file -> put your phone in download mode by pressing vol down + home button + power and press volume up key -> connect your phone in your computer and let it install necessary driver. if the drivers were installed properly you will see COM id in odin. Only proceed if you see COM id. -> click on PDA and select the .tar that we extracted before -> just don't touch anything inside odin and click on start. Wait until odin say finished but dont disconnect the phone.
after the odin process there will be some process done in your phone so wait until your phone completely reboots and you see the SU app in your app drawer.
Now disconnect your phone.
Your phone will be rooted mate.
If you wanna experience s5 in your s3 then download the S5 sensation custom rom from the very great dev @sunajkram23. He has developed s5 rom with all its features and funtion for s3.
Before you flash any custom rom, you have a flash a custom recovery. I am using latest touch CWM recovery ( google it ) and download .tar file and then flash through odin ( same procedure to flash as I stated above ).
---------- Post added at 04:36 PM ---------- Previous post was at 04:36 PM ----------
hey mate. Use chairfire autoroot to root your s3.
I used it too to root my phone. It is best way.
Just goto chaifire website (google it) -> download the autoroot for your variant -> download Odin (I think it come inside autoroot zip) -> extract the zip -> you will find a .tar file -> put your phone in download mode by pressing vol down + home button + power and press volume up key -> connect your phone in your computer and let it install necessary driver. if the drivers were installed properly you will see COM id in odin. Only proceed if you see COM id. -> click on PDA and select the .tar that we extracted before -> just don't touch anything inside odin and click on start. Wait until odin say finished but dont disconnect the phone.
after the odin process there will be some process done in your phone so wait until your phone completely reboots and you see the SU app in your app drawer.
Now disconnect your phone.
Your phone will be rooted mate.
If you wanna experience s5 in your s3 then download the S5 sensation custom rom from the very great dev @sunajkram23. He has developed s5 rom with all its features and funtion for s3.
Before you flash any custom rom, you have a flash a custom recovery. I am using latest touch CWM recovery ( google it ) and download .tar file and then flash through odin ( same procedure to flash as I stated above ).
GUYS, MY Device(Galaxy S2 GT-I9100) In recovery mode
1. full test
2. Item test
3. Test report
4. Version
5. Reboot and noting is working to get into download mode and also PC is not detecting the device.
i tried vol down + home + power not worked.
when I factory reset the device its language changes to Chinese again I have to change in English.
Device SW version is 2.3 and SHOWN model is A-102 ( HTC ) which i was seen in recovery mode but actually PHONE MODEL is Galaxy S2 GT I9100
Guys need help i need to update it to official JB.
As i was new to this. so guys give some explanation in detail to get it. I have downloaded Odin 3 , i have downloaded Official JB-XXLSJ , SP flash tool (but dont know how to use it), i installed ADB in my pc with steps followed through website. but it wasn't installed google drivers while ADB installation.
also tried to root process without pc like poot debug app and ministro II app superuser app istalling in my device but no use.
MAJOR PROBLEM IS DEVICE IS NOT GETTING INTO DOWNLOAD MODE, BUT GETS TO RECOVERY MODE, IN RECOVERY ABOVE MENTIONED IS DISPLAYED... SO...
I Think you guys got what my problem is...!!!
/////////// GUYS ANY ONE //////// NEED HELP ///////
Hi there,
First of all you need Odin program for flash any firmware.
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
[email protected] said:
GUYS, MY Device(Galaxy S2 GT-I9100) In recovery mode
1. full test
2. Item test
3. Test report
4. Version
5. Reboot and noting is working to get into download mode and also PC is not detecting the device.
i tried vol down + home + power not worked.
when I factory reset the device its language changes to Chinese again I have to change in English.
Device SW version is 2.3 and SHOWN model is A-102 ( HTC ) which i was seen in recovery mode but actually PHONE MODEL is Galaxy S2 GT I9100
Guys need help i need to update it to official JB.
As i was new to this. so guys give some explanation in detail to get it. I have downloaded Odin 3 , i have downloaded Official JB-XXLSJ , SP flash tool (but dont know how to use it), i installed ADB in my pc with steps followed through website. but it wasn't installed google drivers while ADB installation.
also tried to root process without pc like poot debug app and ministro II app superuser app istalling in my device but no use.
MAJOR PROBLEM IS DEVICE IS NOT GETTING INTO DOWNLOAD MODE, BUT GETS TO RECOVERY MODE, IN RECOVERY ABOVE MENTIONED IS DISPLAYED... SO...
I Think you guys got what my problem is...!!!
/////////// GUYS ANY ONE //////// NEED HELP ///////
Click to expand...
Click to collapse
Is your phone even genuine? Recovery should even look like that!? Did you use this link to download ADB and drivers: http://forum.xda-developers.com/showthread.php?t=2038555 Did you try updating drivers via device manager?
Look if around the internet and only found a SM-J100H root which bricked my device so I had to re flash it, could you please help me find a root for my device please? I know my phone is uncommon especially for the US. I know there is a possible way to root any android device.
Same problem here...
G'day,
I was just looking through for a new ROM for my girlfriends phone (j100y) and saw this.
I rooted her phone with kingo root after flashing the file listed below, just search it - I cant post links.
'J100YDXU0AOC1_root.tar' image by Hosam Kashto
Hope this helps.:good::good:
notese7en said:
G'day,
I was just looking through for a new ROM for my girlfriends phone (j100y) and saw this.
I rooted her phone with kingo root after flashing the file listed below, just search it - I cant post links.
'J100YDXU0AOC1_root.tar' image by Hosam Kashto
Hope this helps.:good::good:
Click to expand...
Click to collapse
Do you happen to have the password for this? I found the RAR file but it's password protected
BioGhosty said:
Do you happen to have the password for this? I found the RAR file but it's password protected
Click to expand...
Click to collapse
Seen it, I think it's fake to force people to pay some money.
creepercast888 said:
Look if around the internet and only found a SM-J100H root which bricked my device so I had to re flash it, could you please help me find a root for my device please? I know my phone is uncommon especially for the US. I know there is a possible way to root any android device.
Click to expand...
Click to collapse
This might help you
Translation, mostly by Google:
Quote:
Originally Posted by dodynoe
How To Root Samsung Galaxy J1 (SM-J100H)
www dodynoe.com/2015/04/how-to-root-samsung-galaxy-j100h
Complete Step By Step Tutorial to Root Samsung Galaxy J1:
This tutorial is only managed using a PC
Step 1:
Download MD5 file through www mediafire.com/downl.../r99xeoywhdryenc/boot.tar.md5
Step 2:
Download and install the USB Driver. www mediafire.com/.../a4hd8y0c1iakysk/Samsung-Usb-Driv...
Step 3:
Download ODIN v3.10 and directly extract it. www mediafire.com/.../v26m0vfo1rb9xi6/Odin3_v3.10.6.zip
Step 4:
Phone: enter download mode first >>. After being turned off, HOLD all three buttons (Power button + Volume Down button + Home Button). After turned on, immediately release (Power button) but still HOLD Volume Down Button + Home button. After that select Continue using Volume button UP. now your phone is already in the download mode.
Step 5:
Plug the phone to a PC via USB cable
Step 6:
Open the Odin v3.10 application that is already downloaded. Click the PA button and select the MD5 file that is already downloaded. Then Click (START) button. Wait until completed and the phone will automatically reboot
Step 7:
Download application iROOt and install in PC. See www mgyun.com/en/getvroot
Step 8:
Open the iRoot application that is already installed earlier and run the root process
Sm-j100y /= sm-j100h
I have encountered a similar incompatibility trying to use the SM-J100H TWRP recovery onto a SM-J100Y handset. Trying to boot into recovery after doing this freezes it, and I have to power it off to get out of it.
It looks like some further development is needed to create a compatible Rom/TWRP image that wont brick the SM-J100Y.
donnsuil said:
I have encountered a similar incompatibility trying to use the SM-J100H TWRP recovery onto a SM-J100Y handset. Trying to boot into recovery after doing this freezes it, and I have to power it off to get out of it.
It looks like some further development is needed to create a compatible Rom/TWRP image that wont brick the SM-J100Y.
Click to expand...
Click to collapse
Comparing the 2 models on here (I can't post links...) mobosdata.com/samsung-galaxy-j1-sm-j100y and mobosdata.com/samsung-galaxy-j1-sm-j100h, the hardware differences are:
RAM: J100y-768MB ; J100H-512MB
SIM: J100y=Single SIM ; J100H=Dual SIM
Network: J100y=3G 850, 900, 2100 MHz, as well as 4G 700, 900, 1800, 2100, 2600 MHz ; J100H=3G 900, 2100 MHz
NFC: J100Y=yes ; J100H=No
Hotspot: J100Y=yes ; J100H=No
AudioRecording: J100Y=yes ; J100H=No
I just wanted to install TWRP. Does anyone know if you need to unlock the bootloader for that using Odin? I would not have thought so, but I could be wrong.
Rooting SM-J100Y
'J100YDXU0AOC1_root.tar' image by Hosam Kashto (Password "hosamkashto") does indeed work for rooting my SM-J100Y but i fail to connect to my network Skinny, if there is a way to edit the image and make a boot img for the updated firmware version i'll be willing to give it a shot. And how hard is it to create a TWRP/CWM rom for this device?
root access successful
I have successfully rooted my samsung J100Y with no issues what so ever, J100YDXU0AOC1.
You need to install kingoroot on your phone first then install kingoroot on your PC, Also install ODIN V3.07 on your PC to get this done properly, when I get home I will upload the files to my dropbox and give better details how to do this correctly.
How To Root Samsung Galaxy J1
This is how you root the Samsung Galaxy J1 (J100YDXU0AOC1) Australia.
- Install Kingoroot on your phone
- Install both Kingoroot and Odin V3.07 on your PC (in the files provided below)
- Put your phone into download mode, power off the phone then hold down power, home and volume down until you see the little android robot
- Open Odin V3.07 and plug your phone in
- Click on PDA in Odin V3.07 and navigate to the file J100YDXU0AOC1_root.tar and press Start (let it work its magic)
- When it says Pass in Odin you are good to go, now open Kingoroot on your PC and run it, it will make sure it is properly rooted, your phone will tell you it is rooted before the PC version does, that's it you have now successfully rooted your phone.
I have included the original firmware in the files just in case something goes wrong for you, you can use Odin to restore with the original firmware.
All the files can be found here: https :// www .dropbox.com/sh/pl2u02ev8abnc7u/AACULRGuaCvwhLveMvnnv86Fa?dl=0
PS: close the gaps in the link to get the files.
blitzya351 said:
This is how you root the Samsung Galaxy J1 (J100YDXU0AOC1) Australia.
- Install Kingoroot on your phone
- Install both Kingoroot and Odin V3.07 on your PC (in the files provided below)
- Put your phone into download mode, power off the phone then hold down power, home and volume down until you see the little android robot
- Open Odin V3.07 and plug your phone in
- Click on PDA in Odin V3.07 and navigate to the file J100YDXU0AOC1_root.tar and press Start (let it work its magic)
- When it says Pass in Odin you are good to go, now open Kingoroot on your PC and run it, it will make sure it is properly rooted, your phone will tell you it is rooted before the PC version does, that's it you have now successfully rooted your phone.
I have included the original firmware in the files just in case something goes wrong for you, you can use Odin to restore with the original firmware.
All the files can be found here: https :// www .dropbox.com/sh/pl2u02ev8abnc7u/AACULRGuaCvwhLveMvnnv86Fa?dl=0
PS: close the gaps in the link to get the files.
Click to expand...
Click to collapse
Wow! It did work, indeed! Where did you get that boot.img??
This really helped, thanks!
But now I just need a custom recovery......
(and a custom rom)
same here
image by Hosam Kashto
Tyrawr.117 said:
'J100YDXU0AOC1_root.tar' image by Hosam Kashto (Password "hosamkashto") does indeed work for rooting my SM-J100Y but i fail to connect to my network Skinny, if there is a way to edit the image and make a boot img for the updated firmware version i'll be willing to give it a shot. And how hard is it to create a TWRP/CWM rom for this device?
Click to expand...
Click to collapse
Hello Tyrawr - I want to Root my Samsung J100 Y by this method
How do you get the image by Hosam Kashto ? Could you please sen me the link ro Download
Best Thanks Georges - Toulouse - France
Hello Blitzya
I would like to Root my Samsung J100Y but I Dont know how to get the Root File by Hosam Kashto
I tried to go to your Shared File in Dropbox but The File is no longer threre - -- Too Bad ! - -
Could you Please Help me ? Best Thanks - Georges - Toulouse - France
blitzya351 said:
This is how you root the Samsung Galaxy J1 (J100YDXU0AOC1) Australia.
- Install Kingoroot on your phone
- Install both Kingoroot and Odin V3.07 on your PC (in the files provided below)
- Put your phone into download mode, power off the phone then hold down power, home and volume down until you see the little android robot
- Open Odin V3.07 and plug your phone in
- Click on PDA in Odin V3.07 and navigate to the file J100YDXU0AOC1_root.tar and press Start (let it work its magic)
- When it says Pass in Odin you are good to go, now open Kingoroot on your PC and run it, it will make sure it is properly rooted, your phone will tell you it is rooted before the PC version does, that's it you have now successfully rooted your phone.
I have included the original firmware in the files just in case something goes wrong for you, you can use Odin to restore with the original firmware.
All the files can be found here: https :// www .dropbox.com/sh/pl2u02ev8abnc7u/AACULRGuaCvwhLveMvnnv86Fa?dl=0
PS: close the gaps in the link to get the files.
Click to expand...
Click to collapse
i got root j100y. took 2 days but got it. Flash J100YDXU0AOC1_OPPOAOC1_V4.4.4_Repair_Firmware.zip. Unzip and find necessary files. Used odin3 13.3.1 latest version, insert files BL, AP and so from the zip. If its taking too long more than 20 mins, power off phone and back on but dont unplug from pc. Should start where it left off. Now, set up phone when it reboots, settings, about phone, tap build number 5 times, enter developer mode, enable usb debug, allow installations from unknown sources. Down apk kingoboot, install on phone. one click root. Device should reboot. Now check root with an app. Should be done if not run kingoroot on pc. Keep trying and follow any prompts on phone always allow and install anyway etc. It is possible.
My question is how can i install a new OS. or how can i get my phone back to work. I tried in downloadmode but my phone is not being detectet by pc.
i speak very bad english and i dont know anything about rooting. can someone help me pleeeease? :crying:
Edit: When i start in recovery it says "recovery is not seandroid enforcing"
Phone data:
Model: SM-J120FN
FCC ID: A3LSMJ120FM
SSN: -J120FNGSMH
Made in Vietnam....
SM-J120FN said:
My question is how can i install a new OS
Click to expand...
Click to collapse
If you want to get back to stock on your Samsung Galaxy J1 2016, you will need the following:
1. Stock rom: SM-J120FN
2. Samsung USB Drivers installed on your windows pc
3. Odin (Samsung's flash tool)
Steps to follow:
1. unzip "stock rom".zip
2. start Odin
3. In the right, click AP and point to the folder where you have the rom unnzipped
4. put your phone in DOWNLOAD mode, not recovery.
5. Now connect your device to the computer
6. Odin should display some com port number if all is good.
7. Click start and wait until success message is displayed
First boot may take a little longer than usual.
Let me know if you get stuck in the process, I might be able to help you.
Also sending some information to your PM (private message inbox). Check it.
Good luck!!!