So this is what happend. I tried to flash the latest official firmware from sammy, whent in to download mode on the phone, selected the right PDA. But then I got this message:
Added!!
Odin v.3 engine (ID:8)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
cache.rfs
Complete(Write) operation failed. All threads completed. (succeed 0 / failed 1)
Then I tried ALL the USB ports and after a while I got this message instead:
Can't open the serial(COM) port.
And upon that, now the pc does not recognize my s2 when I plug it in. Ps I still have the phone up and running in download mode just in case it would f*** up my if I shut it down!
Please help me with this mess! :crying:
Ok, so trying all the usb ports is one thing to do.... There's plenty of other things you need to try. If you can still get in download mode don't stress, 99% of people get out of the situation you're in.
Click the link in my signature, and follow all the steps exactly.
Sent from a galaxy far, far away
Hopper8 said:
Ok, so trying all the usb ports is one thing to do.... There's plenty of other things you need to try. If you can still get in download mode don't stress, 99% of people get out of the situation you're in.
Click the link in my signature, and follow all the steps exactly.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Okey so I tried all the USB ports but with no further succses. After a while I thought, hmm maby a little bit of rest will fix it. This moning was a nightmare, I thought I hard briked the phone but so was not the case! I can't boot the phone but I get this wierd animation instead:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm currently charging but i'm able to boot in to download mode.
Sent from my GT-N7100 using Tapatalk 2
2xmrc00l said:
Okey so I tried all the USB ports but with no further succses. After a while I thought, hmm maby a little bit of rest will fix it. This moning was a nightmare, I thought I hard briked the phone but so was not the case! I can't boot the phone but I get this wierd animation instead:
I'm currently charging but i'm able to boot in to download mode.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
it is not hard brick...btw now when you connect you phone did odin detect ur phone on this screen??? if yes flash a stock firmware..if not remove battery and pres power+volume down+home then insert battery n check whether your phone goes to download mode or not... if goes download mode flash a stock fimrware.. if not and Odin doesnt detect ur phone then you can go to force download mode by using a USB jig...
It's already in download mode; the phone--warning triangle--pc is forced download mode.
tornado92 said:
it is not hard brick...btw now when you connect you phone did odin detect ur phone on this screen??? if yes flash a stock firmware..if not remove battery and pres power+volume down+home then insert battery n check whether your phone goes to download mode or not... if goes download mode flash a stock fimrware.. if not and Odin doesnt detect ur phone then you can go to force download mode by using a USB jig...
Click to expand...
Click to collapse
Could u please link me the right .tar files?
Sent from my GT-N7100 using Tapatalk 2
2xmrc00l said:
Could u please link me the right .tar files?
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
http://samsung-updates.com/device/?id=GT-I9100 please select your region and download then unzip to get .tar files. and flash the file on PDA using ODIN:good: happy flashing..
Thx everyone! The problem is soloved
Sent from my GT-N7100 using Tapatalk 2
:
2xmrc00l said:
Thx everyone! The problem is soloved
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
your welcome buddy
Related
Using Odin, I accidentally repartitioned my phone and didn't flash anything else besides the PIT file. What do I do? My phone doesn't turn on when plugged into the computer or the wall outlet. Is there anything I can do?
My phone is pretty much done, isn't it?
What the hell.... Anyways.... Pit always repartitions your phone. Did you flash anything after that? Details are lacking.
You can't get back into download mode to reflash?
DevinLeFevere said:
What the hell.... Anyways.... Pit always repartitions your phone. Did you flash anything after that? Details are lacking.
Click to expand...
Click to collapse
No, because I wasn't able to use the phone at all after. The phone is dead. It won't do anything. There is no sign of life. I repartitioned it with a pit file and hit start. After that, the phone wouldn't work at all.
Because.... you need to follow steps and read.
You need to start over.... Odin the pit... then follow the steps and odin the rom you want to flash. Your phone isn't gone... yet.
Follow: http://forum.xda-developers.com/showthread.php?t=1124391
DevinLeFevere said:
Because.... you need to follow steps and read.
You need to start over.... Odin the pit... then follow the steps and odin the rom you want to flash. Your phone isn't gone... yet.
Follow: http://forum.xda-developers.com/showthread.php?t=1124391
Click to expand...
Click to collapse
But will this work even though Odin can't see my phone, since my phone acts as if there's no battery? It doesn't function at all. So when I plug it in, nothing happens and Odin never sees my phone.
Actually, my phone is responding all of a sudden, so now I'm flashing my phone with Odin.
Why is Odin stuck at this part of the flash?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yomama07024 said:
Why is Odin stuck at this part of the flash?
View attachment 813654
Click to expand...
Click to collapse
You have to redo it... Sometimes it doesn't completely flash the first time.
Has anyone seen John Connor?
yomama07024 said:
Why is Odin stuck at this part of the flash?
View attachment 813654
Click to expand...
Click to collapse
Or try a different odin package.
"the relentless pursuit of the perfect rom"
or reboot computer, or try different usb port, or try different cable.
Sent from my SCH-I500 using xda premium
yomama07024 said:
Actually, my phone is responding all of a sudden, so now I'm flashing my phone with Odin.
Click to expand...
Click to collapse
What did you do? I have the same problem. It didnt response at all.
you could also try something totally different and try heimdall with a different usb port, if that doesn't work then I'm definitely not sure what else you could try.
did you leave your battery in when you went into download mode to flash the stock rom? if you did, take the battery out, hook up the cable to a usb port hold down the - volume button along with the power button and it should boot into download mode
ztotherad said:
you could also try something totally different and try heimdall with a different usb port, if that doesn't work then I'm definitely not sure what else you could try.
did you leave your battery in when you went into download mode to flash the stock rom? if you did, take the battery out, hook up the cable to a usb port hold down the - volume button along with the power button and it should boot into download mode
Click to expand...
Click to collapse
Thanks for help, it worked.
forserg said:
Thanks for help, it worked.
Click to expand...
Click to collapse
no problem, sir! I'm glad to help
I tryid to install custom kernel from this thread with Odin
http://forum.xda-developers.com/showthread.php?t=1414565
because superuser could not root stock kernel with gingerbred
i dont have much experience so i dowloaded zip file with kernel but Odin requires tar files and in that zip files are onlu files with out extensions like zImage so i create TAR file my self with sam files from zip and with out commpresion and tru to flash with ODIN and ODIN sad that is success but after that i get a
Black screen with phone to computer icon like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tred solution from here http://forum.xda-developers.com/showthread.php?t=751210
but it thas not work ..can i back somewhow stock kernel or kernel that would work ,i bought it just 2 days ago and i cant use it now.
You're in download mode because the flash got screwed up. Go back to the kernel thread and download the ODIN tar file. Flash it with ODIN (PDA slot, the program should detect it in download mode) and it should boot with no problem.
If you still have issues after flashing the kernel correctly, you may have to flash another ROM too.
exodus454 said:
You're in download mode because the flash got screwed up. Go back to the kernel thread and download the ODIN tar file. Flash it with ODIN (PDA slot, the program should detect it in download mode) and it should boot with no problem.
If you still have issues after flashing the kernel correctly, you may have to flash another ROM too.
Click to expand...
Click to collapse
I cant get in download mode ,i tryed 1000 times with this power + volume keys like in that thread but it always back to mobile and computer icon with "!" ,i trued to flash it like that with odin
and it says
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> zImage
And it stays there forewer
Did you try powering down the player, turning it back on and reconnecting it to ODIN?
Sometimes it'll get stuck there for me too, if it's already screwed up there's no more harm done unplugging it and starting over. Don't worry about getting into download mode either, it should flash just fine from the screen you're getting. Done it plenty of times myself with success.
Also just to be sure, you do have a 5.0 international, correct? Hardware home button?
exodus454 said:
Did you try powering down the player, turning it back on and reconnecting it to ODIN?
Sometimes it'll get stuck there for me too, if it's already screwed up there's no more harm done unplugging it and starting over. Don't worry about getting into download mode either, it should flash just fine from the screen you're getting. Done it plenty of times myself with success.
Also just to be sure, you do have a 5.0 international, correct? Hardware home button?
Click to expand...
Click to collapse
I have international version with hardware home buttom ,like i sad i tryed 1000 times power + volume buttons and when screen go black i reles power button and leave volume buttons pressed but still it back to same screen ,i try to unplug it and back many times,and i cant turn it off because i cant remove batery.Is there anywhere stock kernel to try in tar format
OK i suscess to flash this kernel http://forum.xda-developers.com/showthread.php?t=1445840 for USA version but no buttons work now but much better then dead phone , i downoaded TAR file ,maybe i dont know whow to create TAR file from ZIP ,i i use 7ZIP and create TAR file with only zImage file with out commpresion but no luck ,always stack in a loop.
Delete the file for the correct kernel you were trying to flash before and try downloading another copy. Sometimes they get corrupted while downloading and getting a fresh copy to flash will help.
Also holding the power button for 10 seconds will turn off the device.
Thanks ,my samsung is live and runing again ,i succes to install r13 version ,i tryed r14 many times and downloaded many times but failed always but i am happy it's working again, i root it in 10 seconds and it did not want with stock kernel.
guys, my phone has been FINE for ages on I9300XXBLG8 ..then on friday while charging off my laptop ..i pull the plug and boom, it force restarts.
and has been doing so ever since ... just gets stuck at that very 1st galaxy s3 logo.
tried flashing the rom again ...odin fails saying no pit file found .... ditto flashing a kernal ...
looked around net and tried flashing a pit file ... odin log says > Re-Partition operation failed ....
anybody been able to fix something like this....? i have a few pit files i've found ..none seem to work.
are they rom specific ?
sun-drop said:
guys, my phone has been FINE for ages on I9300XXBLG8 ..then on friday while charging off my laptop ..i pull the plug and boom, it force restarts.
and has been doing so ever since ... just gets stuck at that very 1st galaxy s3 logo.
tried flashing the rom again ...odin fails saying no pit file found .... ditto flashing a kernal ...
looked around net and tried flashing a pit file ... odin log says > Re-Partition operation failed ....
anybody been able to fix something like this....? i have a few pit files i've found ..none seem to work.
are they rom specific ?
Click to expand...
Click to collapse
Why are you trying to repartition your phone..PIT-Partition Information Table..is used for partitioning the flash memory of your device.. flash the firmware as PDA with repartition checked off..
Sent from my GT-I9300 using xda app-developers app
zoot1 said:
Why are you trying to repartition your phone..PIT-Partition Information Table..is used for partitioning the flash memory of your device.. flash the firmware as PDA with repartition checked off..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
because trying to flash the normal way just gets me a "no pit file" error in odin.
and i can't get to recover ...
ok sorta progress .. trying to flash CWM recovery via odin3 1.85 gets me a progress bar at least ...but it's hung ... but thats the first progress bar ive seen on my phone afrter two days of trying ... might power off and see whats happens ..
nope...nand write fail :/
how is the phone now? still not working?
So what is the status now? your phone recovered or not?
I have the same problem
I have the same problem
What I already tried
I have it on another usb port (nothing):crying:
And other PC :crying:
And others type ODIN :crying:
And 5 other pit files :crying:
And other firmware Roms from XDA And Sammobile :crying:
It remains no pit file partitioning or no re-partitioning :crying:
Taxi341 said:
I have the same problem
What I already tried
I have it on another usb port (nothing):crying:
And other PC :crying:
And others type ODIN :crying:
And 5 other pit files :crying:
And other firmware Roms from XDA And Sammobile :crying:
It remains no pit file partitioning or no re-partitioning :crying:
Click to expand...
Click to collapse
Exactly same here!! Died today whilst charging - tried everything the OP did but nothing works.:crying:
Calpol said:
Exactly same here!! Died today whilst charging - tried everything the OP did but nothing works.:crying:
Click to expand...
Click to collapse
I'm a noob of android, but i can try this: http://forum.xda-developers.com/showthread.php?t=1840030
??i've got a stock galaxy s3, can only work in download mode :crying:
try this set but follow the screenshots carefully. If not... join the club, search for "sudden death" thread in General section, then, service can be your only option.
http://forum.xda-developers.com/showthread.php?p=31827683
i9.0.1.3k galaxy imperator
I've tried your rescue firmwere but odin return me always the same error, what can i do?only samsung service i think... :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hey
i just wanted to ask if anybody has a work around on my little issue
it started when i flashed the wrong pit in ODIN it hung up on the partion part (hints the wrong PIT file)
so i unplugged the device after the first five min of it hanging up and i did a battery pull now every time i touch a button on the phone it gives me the PHONE../!\..COMPUTER and i cant get it in download mode nor fastboot or just any boot for that matter ik it could be worse (BLACK SCREEN OF DOOM) but i cant use ODIN or even the KIES to flash the appropriate PIT or reset the device so if anybody's gotta walk around solution please help... any help would be exelent at this point
Try Heimdall one-click, search the thread. You should be good, don't worry.
Your phone is T959v? Be careful to flash the right files, whatever phone you are on.
That's the soft brick screen just plug into Odin and flag the right file
Sent from my SGH-T959 using xda premium
You should be able to get into download mode, although it can be a bit tricky when your soft bricked.
A Jig will do the trick though (Home made or tailor made) if your looking for an easy way to get into DL Mode that is
Cheers,
Chris
Odin will see the phone at that screen no need to worry about download mode
Sent from my SGH-T959 using xda premium
FWIW here (from N00B_IN_N33D's MIUI guide stickied in Q&A):
"SOFT" BRICKED WHILE USING ODIN?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are getting a "Phone.. ! ..Computer" image (seen above) when booting phone, yes, you are bricked but it is reversible! Just follow these steps...
Make sure you have ODIN OPEN with admin privileges!
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
You don't necessarily need the download mode image to be present. As long as you are getting the COM ID to light up yellow in ODIN, just flash back to stock like normal.
Click to expand...
Click to collapse
cannondaleV2000 said:
Odin will see the phone at that screen no need to worry about download mode
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
oh you guys are genuises thank you guys she running like a champ lol
n3rd4792 said:
oh you guys are genuises thank you guys she running like a champ lol
Click to expand...
Click to collapse
Hey which file did you use ? I think i can't get hold of the right PIT file yet
zaryan said:
Hey which file did you use ? I think i can't get hold of the right PIT file yet
Click to expand...
Click to collapse
He was on a Galaxy S 4g (t959V) phone so he was in the wrong forum. If you have a samsung vibrant (t959) then go here http://forum.xda-developers.com/showthread.php?t=849028 and use steps 2-4 to go back to stock, the files are there also.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
He was on a Galaxy S 4g (t959V) phone so he was in the wrong forum. If you have a samsung vibrant (t959) then go here http://forum.xda-developers.com/showthread.php?t=849028 and use steps 2-4 to go back to stock, the files are there also.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
Mine is also T959V Galaxy S 4G from T-Mobile
now i flashed the wrong PIT file and i made it to download mode but i since the PIT partition is messed up I am unable to flash any ROM
Really need a help on this one
So here's my case: I flashed a Vibrant ROM - It worked, it boots up to the home screen and all of sudden reboots, keeps doing that, although my phone is T959V - Tmobile
So when i flash the correct PIT File, along with the other files here is what i get
<ID:0/134> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_T959VUVKG4_CL385158_REV00_user_low_noship.tar.md5 is valid.
<OSM> T959VUVKG4-Phone-CL1037720.tar.md5 is valid.
<OSM> SGH-T959V-CSC-TMB-VIBRANTP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/134> Odin v.3 engine (ID:134)..
<ID:0/134> File analysis..
<ID:0/134> SetupConnection..
<ID:0/134> Initialzation..
<ID:0/134> Set PIT file..
<ID:0/134> DO NOT TURN OFF TARGET!!
<ID:0/134>
<ID:0/134> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It fails re-partition, please can someone help me fix that
zaryan said:
Mine is also T959V Galaxy S 4G from T-Mobile
now i flashed the wrong PIT file and i made it to download mode but i since the PIT partition is messed up I am unable to flash any ROM
Really need a help on this one
Click to expand...
Click to collapse
You should ask for help in the galaxy s 4g (t959v) forums, this is for the t959 vibrant. Here is a link that may help you http://forum.xda-developers.com/showthread.php?t=1365957
Sent from my SGH-T959 using Tapatalk 2
I was recently changing custom roms on my i9300 and think i formatted the wrong option. Now when I turn on my phone it gets as far as the start up screen, then goes off and just continues to repeat. I have trawled the web and tried a couple PIT and PDA's but no joy as of yet. I can boot it into download mode. Any help would be highly appreciated! Thank you.
SwirlesY said:
I was recently changing custom roms on my i9300 and think i formatted the wrong option. Now when I turn on my phone it gets as far as the start up screen, then goes off and just continues to repeat. I have trawled the web and tried a couple PIT and PDA's but no joy as of yet. I can boot it into download mode. Any help would be highly appreciated! Thank you.
Click to expand...
Click to collapse
what happens when you try to flash a rom via Odin? any error message? I guess we need a bit more information here
chrismast said:
what happens when you try to flash a rom via Odin? any error message? I guess we need a bit more information here
Click to expand...
Click to collapse
Ahh of course haha. Well the PIT has passed but when i put the PDA on, depending on if i do straight after i have run the PIT, which it stays on "Setup connection..." or if I run the PDA on its own i get "NAND write start!"
Flash a stock rom for your galaxy s3 via Odin it's only recover your phone then you will root again
Sent from my GT-I9100 using xda premium
and just to add to the NAND write start, there is a blue bar on the download screen on my s3
gauravgymnast08 said:
Flash a stock rom for your galaxy s3 via Odin it's only recover your phone then you will root again
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
ok downloading as we speak....
the PDA i downloaded did not come with a PIT in the zip. So i have just used to PDA on its own, and when i opened it come up in the comments "Leave CS...". The start option became available so i hit it and got "NAND write start..."
I then used a PIT i used previously and tried again, then got this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Service centre repair .
jje
SwirlesY said:
the PDA i downloaded did not come with a PIT in the zip. So i have just used to PDA on its own, and when i opened it come up in the comments "Leave CS...". The start option became available so i hit it and got "NAND write start..."
I then used a PIT i used previously and tried again, then got this...
Click to expand...
Click to collapse
Hey untick repartition then flash
Sent from my GT-I9100 using xda premium
Did it help when flashed without re-partition checked?
Why do you need a PIT file? Where did you get it?
Repartitioning could be extremely dangerous.
try odin version 3.04 without the PIT file, if you get NAND write start just wait about 5-6 mins, if it stays where it is come here again.
IF you can, try rooting it with CF AUto root then flash a recovery. THen put a ROM on your external SD card and flash it via recovery and see if it boots.
Very sorry for the delay in reply. Its been bloody hectic!
I tried both of those suggestions Mr Mirage.
The first one i got the NAND write start, and the same on the second. It also got stuck on NAND write start
if you flashed a pit file, send it to service to replace the motherboard
Glebun said:
if you flashed a pit file, send it to service to replace the motherboard
Click to expand...
Click to collapse
Sorry if I sound a bit dim, but is that to samsung, vodafone, or phones 4 u? And do you know how much that will cost about?
Send it to phones 4 u if that's who bills you for your contract
Sent from my GT-I9300 using Tapatalk 4 Beta
It goes to the vendor not the network under SOGA .
Vendor may well send it straight to Samsung .
jje