hi, itried different methods and solutions and no luck on this, i cant start and the pone stucks in apfastboot, says always something about
cg system invalid SP data
cg system 0x0056
cg system system
i tried to flash using rsd lite 6.1.5 and stops in step 2 or 3
tried to flash using ethernity Project
also unbrick using USA unbrick tool
i ised several roms including latam, brazil retail, telcel but no luck
can not enter into recovery mode cwm
and the battery is getting low.....i want to come back my pone alive once again...my company is Telcel originally the pone came with 2.3.5 , later updated to 2.3.6 after to that instlled ote uodate to 4.0.4, from that i tried to install 4.1.2 using artmodv4.3 but i made the mistake to flash the correct kernel, i dont remember my original kernel
i dont know what to do...:crying: and my battery is getting lower and lower
please help me i am a newbie in the razr roms....
thanks!
Why you try to flash ICS? use RSD 7 and flash JB fastboot.
Gesendet von meinem XT910 mit Tapatalk 4
thanks
dtrail1 said:
Why you try to flash ICS? use RSD 7 and flash JB fastboot.
Gesendet von meinem XT910 mit Tapatalk 4
Click to expand...
Click to collapse
i will try this weekend to apply this...
Thanks
Tlahuizcalli said:
i will try this weekend to apply this...
Thanks
Click to expand...
Click to collapse
I am trying to find rsd 7 but i cant find it.....and also the battery is totally dead so i see only a White led,,,,,i dont know how to restart it again...=(
solved!
dtrail1 said:
Why you try to flash ICS? use RSD 7 and flash JB fastboot.
Gesendet von meinem XT910 mit Tapatalk 4
Click to expand...
Click to collapse
finally i flash the razr with european rom jb 4.1.2, after many days i charged battery directly using 2 wires and let me flash the system. using rsd 6.1.5..thanks a lot.!!
Related
Hey community,
I am now on divine rom and i have test it and its not fast and i will flashing to miui.
So i go into recovery mode and nothing works.
So i have download mobile odin.
And the lp7 kernel from codeworkx thread.
Now my question.
Can i flash it with mobile odin?
I have the ics bootloader.
Thx for answers.
Gesendet von meinem GT-I9100G mit Tapatalk 2
See this thread.
Hey everybody,
i have a kernel file boot.img
how can i flash it?
How can i make a CWM file?
How can i make a .tar file?
Can u not download a kernel to flash
Sent from my GT-I9100 using xda premium
No because i got the boot.img from the cm9 rom
Gesendet von meinem GT-I9100 mit Tapatalk 2
pandalow said:
No because i got the boot.img from the cm9 rom
Gesendet von meinem GT-I9100 mit Tapatalk 2
Click to expand...
Click to collapse
Try a new kernel can u get into recovery
Sent from my GT-I9100 using xda premium
Yes all is ok. But how can i flash a boot.img0
Gesendet von meinem GT-I9100 mit Tapatalk 2
pandalow said:
Yes all is ok. But how can i flash a boot.img0
Gesendet von meinem GT-I9100 mit Tapatalk 2
Click to expand...
Click to collapse
go into recovery and mount usb storage and put this to your phone and flash though recovery http://forum.xda-developers.com/showthread.php?t=1617219
You're not supposed to unpack .zip files for Cwm. Leave as it is (download again and leave it as zip) and flash with Recovery.
Sent from my Galaxy S2 GT i9100
OH MY GOD! Why you don't understand me? I have a boot.img Kernel from a ROM! and i want to flash it to a other rom? How can i flash boot.img?
dd if=boot.img of=/dev/block/mmcblk0p5
terminal emulator?
heimdall flash --kernel boot.img
Through ADB install the kernel. Alternatively, to flash the "boot.img" and you can use the program FASTBOOTGUI-beta2 download here ; http://www.mediafire.com/?wq5yxg58mq79kij , is much more practical and fast, without using the Windows command prompt with ADB ...
allyourbase said:
heimdall flash --kernel boot.img
Click to expand...
Click to collapse
Heimdall works with i9100?
Sent from my Galaxy S2 GT i9100
Heimdall is compatible with i9100 ..
devid801 said:
Heimdall is compatible with i9100 ..
Click to expand...
Click to collapse
This.
How can i make a CWM file?
How can i make a .tar file?
Hello
Can someone please me what to do before flashing the new bootloader and new lla rom and to stay completly stock with a 0 flash counter ?
Is triangle away still working ?
Note : im using exynos abuse right now and i do like to keep it after i install the new firmware with the bootloader ..
Can someone please direct me ?
Sent from my GT-I9300 using xda premium
flash le8
then tringle away
Le8 ??
Sent from my GT-I9300 using xda premium
Firmware... Last 3 letters are LE8
Gesendet von meinem GT-I9300 mit Tapatalk 2
I rooted my phone on the Christmas leak and I wanted to unroot to update to the newest version but the update fails so I want to just use RSD lite to flash the latest version (98.72.16) I am on 98.72.8 will it brick my phone?? And if it won't brick it then do I just use the .sbf file from the sbf.droid-developers website please help I am a noob but I really want to learn!
Big_Red77 said:
I rooted my phone on the Christmas leak and I wanted to unroot to update to the newest version but the update fails so I want to just use RSD lite to flash the latest version (98.72.16) I am on 98.72.8 will it brick my phone?? And if it won't brick it then do I just use the .sbf file from the sbf.droid-developers website please help I am a noob but I really want to learn!
Click to expand...
Click to collapse
you can just rsd lite it, it will not brick
Sent from my GT-I9300 using xda app-developers app
TheMrcool212 said:
you can just rsd lite it, it will not brick
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
OK thanks I'll try it....and it will return me completely back to stock right out of the box as if I've never rooted??
Big_Red77 said:
OK thanks I'll try it....and it will return me completely back to stock right out of the box as if I've never rooted??
Click to expand...
Click to collapse
No, your apps, accounts & contacts will be saved, unless if you factory reset in the stock recovery. You will be unrooted
Sent from my GT-I9300 using xda app-developers app
Sorry I'm on the website on my phone and didn't see the last part....thanks for all your help!!
I have one last question......when I go into the boot loader menu do I choose ap fastboot or sbf flash. And by the way should the file be a .sbf file or a different file extension??
Sent from my DROID RAZR using xda app-developers app
Similar Question
I bought a used Droid RAZR and it constantly reboots. It was running stock 4.1.2 and Factory resting, booting into Safe Boot, formatting the Internal SD memory, or all 3 wouldn't stop it so I Rooted it with razr blade for Jelly Bean and then flashed the lastest nightly of CM 10.1. It never gets service so I was to flash it back to stock ICS with RSD lite or back to Jelly Bean with the sbf. Before I do this can anyone tell me if I run the risk of bricking it flashing either of the sbf's? Thanks in advance!
anti_gravity99 said:
I bought a used Droid RAZR and it constantly reboots. It was running stock 4.1.2 and Factory resting, booting into Safe Boot, formatting the Internal SD memory, or all 3 wouldn't stop it so I Rooted it with razr blade for Jelly Bean and then flashed the lastest nightly of CM 10.1. It never gets service so I was to flash it back to stock ICS with RSD lite or back to Jelly Bean with the sbf. Before I do this can anyone tell me if I run the risk of bricking it flashing either of the sbf's? Thanks in advance!
Click to expand...
Click to collapse
I had the same problem (obviously) but TheMrCool212 helped me (don't forget to push his thanks button!!) And I flashed the file from WWW.sbf.droid-developers.org using RSD lite it took 10-20 mins. Just remember to use the right file for which variant of the RAZR you have. I don't think the file was a .sbf file but it WILL work. P.S. I would not recommend going back down to 4.0.4 because they switched kernels between 4.0.4 and 4.1.2 and I heard it wouldn't work so I just used the 4.1.2 file. But if your dead set on going back to 4.0.4 ask around some more before flashing. Hope this helped if you are confused or need more help just ask me.
Sent from my DROID RAZR using xda app-developers app
Hi team
Thanks for the wonderful Stock ROM in the development. Section
Im having Moto Razr Maxx (XT910) with Asian Retail ICS 4.0 ROM.
& 3.0.6-g3c83d29 kernal.
I have activated Safe strape. 3.11 with slot0-Stock ICS 4.0
Slot1-Cyanogen mod 10.1 RC05
Slot2- tried Stock EU ROM as instructed. But getting blank screnn after reboot. !!!!
Can you pl. Help me to resolve the issue??
Let me tell you, I have not installed kernel as suggested. In this thread.....
Sent from my XT910 using Tapatalk 2
You must flash the JB kernel because that rom is Jelly Bean and you are still on ICS...
Sent from my Razr XT910
Thanks mate..
So I want to load JB kernel on slot2 right??
I have already downloaded specific JB kernel (ArtMod 14 number. Kernel) but its .image file hence not showing in safe strape'install' menu.
Bro. Can you please give more detail on how to load the same??
Im really fedup with the battery life On CM 10.1....pls. help....
Sent from my XT910 using Tapatalk 2
Pl. Help brothers!!!!
Sent from my XT910 using Tapatalk 2
As far as I know kernel will be something like boot.img. I never use safestrap before. I don't know if safestrap has option to flash kernel. If it doesn't the you have to find zip flashable kernel not the img kernel.
Sent from my XT910 using XDA Premium 4 mobile app
demonshouter said:
As far as I know kernel will be something like boot.img. I never use safestrap before. I don't know if safestrap has option to flash kernel. If it doesn't the you have to find zip flashable kernel not the img kernel.
Sent from my XT910 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
sun1983 said:
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
Click to expand...
Click to collapse
Anybody. Plsssssssss... help
Sent from my XT910 using Tapatalk 2
sun1983 said:
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
Click to expand...
Click to collapse
I'm also using BMM that can flash boot.img directly. But I think you can do this guide: http://forum.xda-developers.com/showthread.php?t=2078021
CAREFULL: use just the kernel flashing part of the guide: fastboot flash boot boot.img
and be sure you flash the correct boot.img that you downloaded. you can download the right kernel from the other artur mode:http://forum.xda-developers.com/showthread.php?t=2260951
one more thing. I never done that after SS was installed. So better wait for others to confirm that it's OK before you actually doing this.
Maybe you can also try this tool to flash kernel: http://forum.xda-developers.com/showthread.php?t=2399385
He says it support any fastboot device.
Thanks bro.. Ill surely try this
Sent from my XT910 using Tapatalk 2
hi all! i have some minor issues with the rom and i hope you can help me...
1. the phone (razr maxx) didnt charge while powered off
2. i cant seem to install the smart actions i so love!
does anyone have any idea to fix those?
sun1983 said:
Thanks bro.. Ill surely try this
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Friends,
This is what I understand after reading few relavent threads as given below
- First I need to backup my Stock ICS kernel and CID using BMM
- Then reboot phone, select System_2 froom BMM bootmenu ( as i want to install EU JB on System_2)
- In the BMM, I need to delete CID then flash Artmod EU JB kernel
- Then wipe cache, dalvik cache
- Now I have to flash EU JB ROM
- pl confirm : should I have to restore CID or not in last step?
Now I'll be on STOCK EU Jelly Bean 4.1.2 on my System_2 slot.... M i correct?
Pl. Guide... prompt response is highly appreciated...thanks
Sent from my XT910 using Tapatalk 2
sun1983 said:
Friends,
This is what I understand after reading few relavent threads as given below
- First I need to backup my Stock ICS kernel and CID using BMM
- Then reboot phone, select System_2 froom BMM bootmenu ( as i want to install EU JB on System_2)
- In the BMM, I need to delete CID then flash Artmod EU JB kernel
- Then wipe cache, dalvik cache
- Now I have to flash EU JB ROM
- pl confirm : should I have to restore CID or not in last step?
Now I'll be on STOCK EU Jelly Bean 4.1.2 on my System_2 slot.... M i correct?
Pl. Guide... prompt response is highly appreciated...thanks
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
You don't have to erase your Cid if you are from Europe,otherwise yes.
And if this is your first time that you want to install some rom on System 2,you must activate the partition.
Here http://forum.xda-developers.com/showthread.php?t=2325764 are some video tutorials how to use BMM.
Sent from my Razr XT910