ok before i was on ics stock. then i upgrade to jb and i dont like it. so many bugs. it is an early jb build btw.
then i downgraded back to ics by installing a jb hboot twrp, and restore a ics nand backup by ckpv5. then 3 months later which is today, i want to upgrade back to jb.
so i install everything back to stock. both stock recovery.img and stock boot.img installed. i used the files from here http://forum.xda-developers.com/showthread.php?t=2210619 at post #1 there are
STOCK_boot.img_Installer.zip - [Click for QR Code] (3.58 MB, 609 views)
STOCK_recovery.img_Installer.zip - [Click for QR Code] (4.32 MB, 622 views)
and just simply press install recovery.img and install boot.img command via fastboot. ok so all done everything is stock. stock kernel stock recovery and stock ics rom, but jb hboot.
then i go to settings and check for update, and i downloaded the 4.1 jb upgrade and it says ready to install then i press ok to install it. then my phone shuts off by itself then i didnt really pay attention to my phone for about 20 seconds then my phone reboots, i thought to myself wow it took this short amount of time to upgrade to jb? then after phone boots my phone are still on ics!! i checked an update again from settings and it ask me to download the updates again.
what should i do? i already changed everything to stock, recovery and boot (kernel) to stock. what else i should do?
Izzy Stinson said:
ok before i was on ics stock. then i upgrade to jb and i dont like it. so many bugs. it is an early jb build btw.
and just simply press install recovery.img and install boot.img command via fastboot. ok so all done everything is stock. stock kernel stock recovery and stock ics rom, but jb hboot.
what should i do? i already changed everything to stock, recovery and boot (kernel) to stock. what else i should do?
Click to expand...
Click to collapse
You already updated to JB before, so there is no need/you can't to do software update again (with ICS boot.img and recover.img but your hboot is JB), just simply restore your JB Nandroid backup
Then only do software update checking if there is another update for your CID
ckpv5 said:
You already updated to JB before, so there is no need/you can't to do software update again (with ICS boot.img and recover.img but your hboot is JB), just simply restore your JB Nandroid backup
Then only do software update checking if there is another update for your CID
Click to expand...
Click to collapse
thank you. and where can i get jb nand backups?
Izzy Stinson said:
thank you. and where can i get jb nand backups?
Click to expand...
Click to collapse
You don't make one ?
There are not many of JB Nandroid available - http://forum.xda-developers.com/showthread.php?t=2324815
Just check your CID and see any of those match yours
ckpv5 said:
You don't make one ?
There are not many of JB Nandroid available - http://forum.xda-developers.com/showthread.php?t=2324815
Just check your CID and see any of those match yours
Click to expand...
Click to collapse
my cid is 044. thank you
i downloaded the correct jb nand backup 044 then i install twrp jb hboot recovery, then u restored the nand backup with my own serial number.
then after that i reboot my phone it just blank, nothings happening, my phone wont boot, but my light of my phone is on.
whats next?
edit: nvm, it boots
Boot.img flashed ??
Izzy Stinson said:
i downloaded the correct jb nand backup 044 then i install twrp jb hboot recovery, then u restored the nand backup with my own serial number.
then after that i reboot my phone it just blank, nothings happening, my phone wont boot, but my light of my phone is on.
whats next?
Click to expand...
Click to collapse
Flash the boot.img from the nandroid thread through fastboot
ckpv5 said:
Boot.img flashed ??
Click to expand...
Click to collapse
yes. i just realised i havent installed boot img and recovery img from the thread
Related
Hi guys! Today I wanted to get back to my JB nand backup, but the only thing I get is a black screen.
I've made a backup this way:
1) Unlocked bootloader
2) flashed nexusrecovery
3) Made a backup
Now I try to get back to JB backup. so I do next steps:
1) Restore backup in nexus recovery (OK)
2) Install stock recovery
3) Restart
4) Black screen
What am I doing wrong? Maybe wrong recovery? The faster you answer, the bigger THANK YOU you'll get
rey71ng said:
Hi guys! Today I wanted to get back to my JB nand backup, but the only thing I get is a black screen.
I've made a backup this way:
1) Unlocked bootloader
2) flashed nexusrecovery
3) Made a backup
Now I try to get back to JB backup. so I do next steps:
1) Restore backup in nexus recovery (OK)
2) Install stock recovery
3) Restart
4) Black screen
What am I doing wrong? Maybe wrong recovery? The faster you answer, the bigger THANK YOU you'll get
Click to expand...
Click to collapse
Did you flashed stock boot.img? http://forum.xda-developers.com/showthread.php?t=2212067 16)
secthdaemon said:
Did you flashed stock boot.img? http://forum.xda-developers.com/showthread.php?t=2212067 16)
Click to expand...
Click to collapse
no way to download that boot.img, because it was deleted by the user. I only can download ~ 200 kb img
rey71ng said:
no way to download that boot.img, because it was deleted by the user. I only can download ~ 200 kb img
Click to expand...
Click to collapse
Are you looking for this? http://alturl.com/riqgp
This backups was made before last update of JB!
EasySR said:
Are you looking for this? http://alturl.com/riqgp
This backups was made before last update of JB!
Click to expand...
Click to collapse
Yeah, thx. But could the boot.img be the problem of black screen?
rey71ng said:
Yeah, thx. But could the boot.img be the problem of black screen?
Click to expand...
Click to collapse
If you install stock recovery as u wrote could be
rey71ng said:
Yeah, thx. But could the boot.img be the problem of black screen?
Click to expand...
Click to collapse
I'd say that's the main reason of black screen
U have to flash the jb optimized recovery.
Flowed from my HTC branded muffin...
I've done with going back to stock. That was a wrong boot.img. now the latest update was installed, and everything is working fine. Thx to all who helped me to resolve this problem.
Sent from my HTC Desire X using xda app-developers app
Hi everyone..first post..so..noob alert!!
I have a gsm xt910(673.94.324 asiaretail) on stock 4.0.4, rooted, safestrapped and with cm10 in my romslot 1.
So today i did a nandroid backup of my stock system..because i had lost some apps(happened randomly earlier too)..the recovery was successful..but when i booted it up..it was stuck at a black screen with the buttons lighted up n random vibrations..
I tried booting cm10..same thing..
so i wiped all my rom slots except the stock..created a new one and restored the stock nandroid on it..n it booted up just fine..
The thing is..stock slot wont boot up..regardless opf the rom i put in it..nandroid..cm10..whatever..
And only the nandroid backup of stock rom works..in custom slots..no cm10..no aokp..nothing..
i've considered the rsd route but i dont have the fastboot files for asiaretail 4.0.4
please suggest..i want my stock rom in my stock slot back and the ability to boot up cm10 in safe system!!!
AakashXT910 said:
Hi everyone..first post..so..noob alert!!
I have a gsm xt910(673.94.324 asiaretail) on stock 4.0.4, rooted, safestrapped and with cm10 in my romslot 1.
So today i did a nandroid backup of my stock system..because i had lost some apps(happened randomly earlier too)..the recovery was successful..but when i booted it up..it was stuck at a black screen with the buttons lighted up n random vibrations..
I tried booting cm10..same thing..
so i wiped all my rom slots except the stock..created a new one and restored the stock nandroid on it..n it booted up just fine..
The thing is..stock slot wont boot up..regardless opf the rom i put in it..nandroid..cm10..whatever..
And only the nandroid backup of stock rom works..in custom slots..no cm10..no aokp..nothing..
i've considered the rsd route but i dont have the fastboot files for asiaretail 4.0.4
please suggest..i want my stock rom in my stock slot back and the ability to boot up cm10 in safe system!!!
Click to expand...
Click to collapse
just download the fastboot files and use them in rsd litel to go completely back to stock and start all over again
naifs_br10 said:
just download the fastboot files and use them in rsd litel to go completely back to stock and start all over again
Click to expand...
Click to collapse
SPDREM_U_01.6.7.2-180_SPU-19-TA-11.2_SIGNEuropeAustraliaEMEA_USASPDRICSRTGB_HWp2b_Service1FF_fastboot.xml
i have this fastboot file..HSD-Pilot provided this link somewhere here..is it ok for me to flash it? I'm on asiaretail and this seems to be a european version..he did say its okay..but that cid and all...no worries?
I did that...rsd..n it worked!! I'm on stock eu rom now!! Got an update to jb as well..but before that.off to root again!!
A huge thanks to Naifs_br10..therazrguy..hsd-pilot and the guy who uploaded the eu rom!!
AakashXT910 said:
SPDREM_U_01.6.7.2-180_SPU-19-TA-11.2_SIGNEuropeAustraliaEMEA_USASPDRICSRTGB_HWp2b_Service1FF_fastboot.xml
i have this fastboot file..HSD-Pilot provided this link somewhere here..is it ok for me to flash it? I'm on asiaretail and this seems to be a european version..he did say its okay..but that cid and all...no worries?
I did that...rsd..n it worked!! I'm on stock eu rom now!! Got an update to jb as well..but before that.off to root again!!
A huge thanks to Naifs_br10..therazrguy..hsd-pilot and the guy who uploaded the eu rom!!
Click to expand...
Click to collapse
congratulations my friend and enjoy
So i finally decided to update to jb . at my first try, i flashed a stock recovery from this thread (http://forum.xda-developers.com/show....php?t=2076675) then i download the update and install. but installation stops halfway, it gives me red triangle then reboot by itself.
what can i do to fix this?
so i had to flash twrp again and restored a nand backup of ckpv5 from here (http://forum.xda-developers.com/showthread.php?t=2210619), done with restoring nand backup i proceed, went to fastboot, conect my phone to pc. and i extracted the STOCK_recovery.img_Installer.zip from here again (http://forum.xda-developers.com/showthread.php?t=2210619) and i clicked on Install Recovery.img then it says done. then i reboot.
so of course im back to pure stock, not rooted. then i try to download and install the jb update again. the same, it stops halfway and gives me red triangle. then i wonder whats the cause of this. i already restored a fresh nand backup, no root and flashed stock recovery.
then i just remember i flashed nexus_prime custom kernel before. then i go to settings>software information>more>then it says my kernel version is [email protected] #2 SMP PREEMPT, and its true, nexus prime kernel still applied eventhough i already restored a fresh nand backup. this means even i already restored a fresh nand backup and flashed a stock recovery, why im still using nexus prime custom kernel?
so the reason why i cant update eventhough i already restored a nand backup and install stock recovery, im still using a custom kernel of nexusprime it just wont go away.
so how to use stock kernel again? pls help...
w1040 said:
So i finally decided to update to jb . at my first try, i flashed a stock recovery from this thread (http://forum.xda-developers.com/show....php?t=2076675) then i download the update and install. but installation stops halfway, it gives me red triangle then reboot by itself.
what can i do to fix this?
so i had to flash twrp again and restored a nand backup of yours from here, then i go to fastboot, conect my phone to pc. and i extracted the STOCK_recovery.img_Installer.zip and i clicked on Install Recovery.img then it says done. then i reboot.
so of course im back to pure stock, not rooted. then i try to download and install the jb update again. the same, it stops halfway and gives me red triangle. then i wonder whats the cause of this. i already restored a fresh nand backup, no root and flashed stock recovery.
then i just remember i flashed nexus_prime custom kernel before. then i go to settings>software information>more>then it says my kernel version is [email protected] #2 SMP PREEMPT, and its true, nexus prime kernel still applied eventhough i already restored a fresh nand backup. this means even i already restored a fresh nand backup and flashed a stock recovery, why im still using nexus prime custom kernel?
so the reason why i cant update eventhough i already restored a nand backup and install stock recovery, im still using a custom kernel of nexusprime it just wont go away.
so how to use stock kernel again? pls help...
Click to expand...
Click to collapse
Have you try to flash stock boot.img?
I read in your text only that you flashed stock recovery.
EDIT: in my backup (O2__102) is a stock boot.img and stock recovery.img
hTC Desire X|ShadowDX|ICS
0zura said:
Have you try to flash stock boot.img?
I read in your text only that you flashed stock recovery.
EDIT: in my backup (O2__102) is a stock boot.img and stock recovery.img
hTC Desire X|ShadowDX|ICS
Click to expand...
Click to collapse
omg im so dumb. no i havent try that and i will try now and try to update again.
thanks a lot!!!! sorry cant thanks though 8 limited thanks per day :laugh:
edit: ok i flashed boot.img and i check my kernel versions it is named [email protected] #1 SMP PREEMPT
still not sure why my kernel name has 'root' in it but whatever.
downloading the jb update now wish me luck!
w1040 said:
omg im so dumb. no i havent try that and i will try now and try to update again.
thanks a lot!!!! sorry cant thanks though 8 limited thanks per day :laugh:
Click to expand...
Click to collapse
No problem dude Thank me tomorrow, haha
Report your result here
hTC Desire X|ShadowDX|ICS
0zura said:
No problem dude Thank me tomorrow, haha
Report your result here
hTC Desire X|ShadowDX|ICS
Click to expand...
Click to collapse
is it normal my kernel version is named [email protected] #1 SMP PREEMPT even after flashing boot.img?
w1040 said:
is it normal my kernel version is named [email protected] #1 SMP PREEMPT even after flashing boot.img?
Click to expand...
Click to collapse
I think so, just try to make the update.
After update you have supersu, but no root. I read here somewhere that you must flash supersu again after update to have root
hTC Desire X|ShadowDX|ICS
0zura said:
I think so, just try to make the update.
After update you have supersu, but no root. I read here somewhere that you must flash supersu again after update to have root
hTC Desire X|ShadowDX|ICS
Click to expand...
Click to collapse
weird isnt the boot.img is the stock one. why should it have supersu
w1040 said:
weird isnt the boot.img is the stock one. why should it have supersu
Click to expand...
Click to collapse
I have from another backup...
Ckpv5 had upload stock boot.img in stock nandroid backup
http://forum.xda-developers.com/showthread.php?p=39658620
hTC Desire X|ShadowDX|ICS
0zura said:
I have from another backup...
Ckpv5 had upload stock boot.img in stock nandroid backup
http://forum.xda-developers.com/showthread.php?p=39658620
hTC Desire X|ShadowDX|ICS
Click to expand...
Click to collapse
thanks again. now my phone updated to JB! :highfive:
w1040 said:
thanks again. now my phone updated to JB! :highfive:
Click to expand...
Click to collapse
Wuuuuuuuh
Which boot.img did you use for it ?
hTC Desire X|ShadowDX|ICS
0zura said:
Wuuuuuuuh
Which boot.img did you use for it ?
hTC Desire X|ShadowDX|ICS
Click to expand...
Click to collapse
the one from ckpv5, can be found here http://forum.xda-developers.com/showthread.php?t=2210619
I'm currently on pacman ROM v22. and i want to go back to stock jelly bean. I do have a nandroid backup but when I try to restore it fails. I guess its because of the latest cwm I.e. v 6.0.4. right? how should I restore the backup now? please help.. I'd be thankful
(galaxy s2 at&t sgh i777)
If you know what version of recovery you used to make the backup, install the kernel with that version of recovery. If the kernel does not match your current operating system, the phone will not boot into the system, but it should boot into recovery and allow you to restore the backup.
Or you could just flash the I777UCMD8 stock firmware with Odin, which you can download from the Download Repository.
as far as I remember I used v6.0 of cwm with the stock kernel.. yeah I was using stock kernel when I had v 6.0 of recovery.. should I downgrade to v6.0 cwm and try?
so I downgraded cwm to 6.0.1.0.. I guess that's the version I was using when I made backup.. tried to restore.. error: MD 5 mismatch
what does it mean?
new problem occurred.. :/
I downgraded recovery to 6.0.1.0 now I can't update it back to 6.0.4.5.. rebooted system.. and booted it back to recovery now that when I try to upgrade cwm I get error: couldnt mount SD card.. and when I checked my kernel has been replaced with cynogenmod #1 from aj kernel.. how should I get back the cwm 6.0.4.5 (I have .zip file is SD card but it won't mount in cwm) please help!
***ignore this I got it back working***
just tell me how can I restore the backup of my stock jelly bean
You can defeat the md5 check if you are absolutely certain that the nandroid backup is not corrupted. Sometimes just changing the file name of a nandroid backup will mess up the md5 sum, but the file is still good. But if you try to install a corrupt nandroid file by defeating the md5 check, you can do serious harm to the phone.
In this case I would not recommend even going there. It's no problem to flash the stock firmware using Odin. Yes, you will need to perform a wipe data/factory reset first, and yes you will lose your apps and personal settings, but there are backup programs for that. I would recommend this route.
inalicse ourings
okay but I didn't make any changes on the nandroid backup..
i have a question.. i'm using unlocked at&t here in india.. will upgrading firmware from odin lock my phone again?
and thanks for your help
There's also the option of using titanium backup restore the apps and settings of your nandroid backup.
settings > extract from nandroid backup > [select backup] > choose which apps/data that you want to restore.
-Cyril
imohitahuja said:
okay but I didn't make any changes on the nandroid backup..
i have a question.. i'm using unlocked at&t here in india.. will upgrading firmware from odin lock my phone again?
and thanks for your help
Click to expand...
Click to collapse
well that's cool cryil.. but unfortunately I have no app & data backed up in my nandroid backup.. its just the stock ROM and settings.. while I was flashing the latest cwm I by mistake deleted my phone data.. so there is nothing just the stock ROM..
I just want to restore my nandroid backup to return to stock ROM.. I am away from PC for sometime so flashing with Odin is not possible at the moment.. I don't know what to do now..
(please also see the other thread by me)
thanks
is there any way to flash stock firmware through cwm.. I have cwm manager and it has a feature which says *flash the stock firmware* but I don't know how to use it... I don't care if I lose root access and cwm..
imohitahuja said:
is there any way to flash stock firmware through cwm.. I have cwm manager and it has a feature which says *flash the stock firmware* but I don't know how to use it... I don't care if I lose root access and cwm..
Click to expand...
Click to collapse
I'm not sure about that one.
But, you can still boot into your custom rooted firmware? If so, you can use Mobile Odin Pro or Mobile Odin Lite to flash the stock firmware from the phone.
yeah mobile Odin I have heard about it.. how to flash firmware with mobile Odin? we have to extract the .zip right? can you please tell me step wise procedure?
thanks once again
5 bucks says he's using Rom Manager app. Because clearly that'd be causing him issues.
yeah phalanx you're absolutely right. I flashed cwm recovery from ROM manager.. I didn't read stickies.. so I was not aware about the ROM manager causing problem thing.. anyways I got v6.0.1.0 of cwm after flashing from ROM manager.. I reeboted phone successfully.. checked kernel.. it was still the stock kernel.. If I'm not wrong flashing cwm replaces the kernel? anyways.. then I booted to recovery.. made nandroid backup.. upgraded cwm to 6.0.4.5.. flashed pacman ROM successfully.. and now that when I want to restore the nandroid backup it gives MD 5 mismatch error.. any suggestions ?
imohitahuja said:
yeah mobile Odin I have heard about it.. how to flash firmware with mobile Odin? we have to extract the .zip right? can you please tell me step wise procedure?
thanks once again
Click to expand...
Click to collapse
imohitahuja said:
yeah phalanx you're absolutely right. I flashed cwm recovery from ROM manager.. I didn't read stickies.. so I was not aware about the ROM manager causing problem thing.. anyways I got v6.0.1.0 of cwm after flashing from ROM manager.. I reeboted phone successfully.. checked kernel.. it was still the stock kernel.. If I'm not wrong flashing cwm replaces the kernel? anyways.. then I booted to recovery.. made nandroid backup.. upgraded cwm to 6.0.4.5.. flashed pacman ROM successfully.. and now that when I want to restore the nandroid backup it gives MD 5 mismatch error.. any suggestions ?
Click to expand...
Click to collapse
You can not install a .zip package with Mobile Odin. You can install the stock I777UCMD8 4.1.2 ICS firmware with Mobile Odin. Mobile Odin recognizes .tar and .tar.md5 files. The stock distribution, which you can download from the Download Repository, (see link in my signature) is a .tar.md5 file. Mobile Odin requires root access, so the following assumes you have a rooted firmware on the phone that will fully boot into the system.
Download Mobile Odin from this thread. Download the flash kernel from post #10 of the same thread. Install both apk's on your phone.
Download the UCMD8 .tar.md5 to the root of the internal sd card. I hope you have access to wifi because that is a pretty large file. Boot into recovery and perform a wipe data/factory reset. Boot back into the system. Mobile Odin will now recognize the .tar.md5 file so that you can flash it. Once you flash it, you will have lost root, and will have fully stock firmware and kernel.
wowie thanks for your help bro! downloading the .tar.md5 .. last question by my side.. I didn't use mobile Odin ever before.. so I dont understand what's that thing? I mean as I have .tar.md5 file I will then just have to click on flash firmware?? or there is something I am missing?
imohitahuja said:
wowie thanks for your help bro! downloading the .tar.md5 .. last question by my side.. I didn't use mobile Odin ever before.. so I dont understand what's that thing? I mean as I have .tar.md5 file I will then just have to click on flash firmware?? or there is something I am missing?
Click to expand...
Click to collapse
Once you have both the main application and the flash kernel installed on your phone, open Mobile Odin, scroll down and touch Open file..., select internal sdcard, and then select the .tar.md5. You should be able to figure out the rest from there.
I successfully flashed i777UCMD8 from mobile odin and didnt even lose root.. thanks creepyncrawly!
I'm having problem connecting mouse from otg.. when I try to connect my phone turns off and takes so much time to start..?? also i am having problem connecting hdmi through mhl.. keeps on connecting and disconnecting..??
imohitahuja said:
I successfully flashed i777UCMD8 from mobile odin and didnt even lose root.. thanks creepyncrawly!
Click to expand...
Click to collapse
Glad to help.
I'm having problem connecting mouse from otg.. when I try to connect my phone turns off and takes so much time to start..?? also i am having problem connecting hdmi through mhl.. keeps on connecting and disconnecting..??
Click to expand...
Click to collapse
I do not have any direct experience with either of these issues. Maybe someone else will be able to answer.
some other guy told me to try flashing any other kernel? can I use any custom kernel with stock jelly bean? which one?
I have a rooted dx and wanted to flash cm9. before i did that i did of course a nandroid backup of my rom. but somehow the installation of cm9 failed so i wanted to restore my old rom but now my dx isn't booting anymore. there is just a black screen and nothing happens.
before installing and restoring i wiped everything!
Could please someone help me to get my phone back!!
JeyJey16 said:
but now my dx isn't booting anymore. there is just a black screen and nothing happens.
Click to expand...
Click to collapse
Flash JB boot.img in fastboot mode.
fastboot flash boot boot.img
You can use the stock boot.img from here : http://forum.xda-developers.com/showthread.php?t=2239511
Or any boot.img for Jelly Bean from the Original Android Development section.
ckpv5 said:
Flash JB boot.img in fastboot mode.
fastboot flash boot boot.img
You can use the stock boot.img from here : http://forum.xda-developers.com/showthread.php?t=2239511
Or any boot.img for Jelly Bean from the Original Android Development section.
Click to expand...
Click to collapse
Okay and after flashing the boot? try again to restore my old rom?
You said you restored your backup, so just flash a JB boot.img is enough.
Restoring the backup again after boot.img flashed is fine too, no harm doing that and maybe even better.
ckpv5 said:
You said you restored your backup, so just flash a JB boot.img is enough.
Restoring the backup again after boot.img flashed is fine too, no harm doing that and maybe even better.
Click to expand...
Click to collapse
Thank You so much, it worked!
Thread closed!