Hey everybody, I picked up a C6833 the other day and ordered the Incipio Feather case for it as well. I have had the Feather cases for previous phones in the past and liked the minimalistic feel they have while still protecting the phone sort of. I was disappointed in the case for the Z Ultra due to no cut out for the magnetic charger. I took matters into my own hands and decided to cut the slot out myself using a razor blade, enough lighting, and a steady hand. I think it came out great and it feels like it belongs. Now I do notice its a little off center, but thats nothing a little more carving away wont fix. Let me know what you guys think.
Not bad for a razor blade. I doubt anybody would notice unless they looked close. Well, other than my somewhat OCD self.
I'd just hate having to slice up and mod a $25 case because the designers didn't bother to include an opening for the magnetic charging port. In particular after they advertise it as having "full access to all ports and buttons." I even contacted them about that and it sounds like they have no plans on releasing an updating "fixed" version. Which is quite unfortunate.
omegafiler said:
Not bad for a razor blade. I doubt anybody would notice unless they looked close. Well, other than my somewhat OCD self.
I'd just hate having to slice up and mod a $25 case because the designers didn't bother to include an opening for the magnetic charging port. In particular after they advertise it as having "full access to all ports and buttons." I even contacted them about that and it sounds like they have no plans on releasing an updating "fixed" version. Which is quite unfortunate.
Click to expand...
Click to collapse
I emailed them as well after I placed the order and they also just gave me a general no answer. I hadnt planned on modding, but after popping it out of the case twice yesterday just to get a little juice and a little bit of isomnia, I decided to go ahead. going to clean it up a bit when I get to work so hopefully it will look a little better. now all I need to do is see about getting a stronger magnet for the charger and I will be happy.
Got my Incipio Watson case through this morning and it's the same, no cut out for the magnetic chargerging port..... quite annoying. So I ended up doing the same, except didn't have the patience for a razor blade and just used a dremel instead (Y). Aside from that the case is really nice and feels like quite good quality!
daven said:
Got my Incipio Watson case through this morning and it's the same, no cut out for the magnetic chargerging port..... quite annoying. So I ended up doing the same, except didn't have the patience for a razor blade and just used a dremel instead (Y). Aside from that the case is really nice and feels like quite good quality!
Click to expand...
Click to collapse
Yea I didn't have access to a dremel at 2am, so I just used a razor. was thinking about the Watson case but didn't know if I would get tired from the flap. good quality cases. just bad they left out an opening for a key port.
Related
I thought the Slide would be a good phone to invest in, considering the first MyTouch was T-Mobile's top Android phone for the longest time. It has its share of accessories.
They dropped the ball on this one. There's absolutely NOTHING. At first I thought OK, maybe it's a little too early to be looking for Slide accessories. Then the "official" launch date came and went. Still nothing.
What have I bought so far? A micro fiber pouch (still a must, IMO).
What I really want is a decent desktop cradle or goose-neck car mount (I have a glass-top desk, so this would work wonderfully). Yeah, I realize eBay has about a zillion car mounts. They're MFing ugly though. I want something that doesn't stick out further than the front of the phone. Was thinking a magnetized suction mount: I'd adhere the magnet to a cheap silicone sleeve so I don't harm the phone. Oh wait, there ARE no silicone sleeves for this phone.
Argh.
Just checked out their official site for accessories. LOL a $30 plastic snap-on kickstand? No doubt similar to Chinese covers you can get on eBay for a few dollars. You have got to be kidding me.
Anyways, I think I'm going to just get an mGrip, as it's the least tacky looking suction mount, IMO. Anyone have one of these?
Either that or I'll get a magnetic mount/goose neck, and adhere it to a replacement battery cover, so I'm not affecting the phone's original battery cover. (Thought about adhering the magnet to one of those eBay-speshul snap-on covers, but I don't like that idea either, as snap-on can just as easily scratch the phone. Yes, I'm extremely anal about this.)
Sorry for the rant/babble... I thought maybe some of you might share my thought processes here.
Another update:
This looks promising. It's called the "In Your Face Viewbase" for iPhones, but it looks like it would fit nicely around the Touch.
http://www.youtube.com/watch?v=yjy-xmSwaa4
A bit overpriced at $30, but it looks pretty slick, and there are a few places I could clip this thing on or around my desk.
the official cases were pushed back, more will be available mid july, then fully rolled out by end of august.
I want the water bottle that comes with the arm strap, but not for $40.
No doubt Xperia Z3 is a beautiful design and most of the owners are inclined to show its curves, shape and color (specially the copper version) to others. I have been looking for many transparent cases around from different brands. In order to check their reviews, I looked at the reviews for xperia z2 cases by all of them.
My findings: Cheaper options available like yousave are not as transparent as they claim. The gel and silicon based cases are not at all transparent. Most of the transparent cases are susceptible to scratches. I have read good reviews about the tough naked case by CaseMate but the case does not protect the front. Then there is Spigen's case (which is not yet available yet) which has good reviews but the side bumper is made of TPU which is not totally transparent and looks a cheap look. The best reviews I found was for Ringke Fusion case however one really bad thing i have read about it is that if the phone falls, the sides of the case scratch the color off the phone. The case claims to have shock absorption but I fail to understand how they claim it.
If anyone among you have used any case before, please guide and recommend and review.
I was looking for a transparent slim case like this, but I can't find any for the Z3 only the Z3c.
http://www.ebay.com.au/itm/ULTRA-Sl...bilePhoneAccessories&var=&hash=item4187d2b0d6
I bought this one, still wanting for it to arrive here.
http://www.ebay.com/itm/Afan-Ultrat...t=US_Cell_Phone_PDA_Cases&hash=item27eb71f4e7
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
jhun80 said:
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
Click to expand...
Click to collapse
Mine was ordered on Oct. 2nd, the next day I received a Tracking Information, still today it just says Label created, when I finally could reach them they told me that they had production issues and was delayed, but the new shipping date was Oct. 24th then later another one called me (left a message earlier) and said that it was 27th, when I asked if it was the 24th or the 27th, he insisted that it was next monday, that of I wanted to keep the order they will offer me a 15% discount if not they could cancel it.
Due that I think that Ringke Fusion design is the best there is for our phones I kept it, I've been using the Fusion in my past 3 phones and are of great quality, honestly I don't know what happened to them this time as is the first time I have problems with them with an order or product.
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
I ordered the Case-Mate Barely There case. It looks and feels OK, although protection is minimal as you'd expect. The cut out on the left is rather large as you can see, to allow the official dock to be used.
The case scratches rather easily. I marked the back by sliding my phone a few centimeters across the desk within an hour of using the case.
Overall, I wouldn't recommend it, due to how easily it scratches.
I'd be really interested to see if anyone handsome photos ofnthe Ringke Fusion case.
Sent from my SGP511 using XDA Free mobile app
jomansch said:
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
Click to expand...
Click to collapse
i ordered this one for my xperia z2 and i can tell you its only for scratches no protection at all, easy scratches the case, i droped my phone and my tempered glass screen protector broke( thank Good i had a screen protector)
Yes I have also read that case mate barely there scratches easily. I have high hopes from ringke fusion. fingers crossed
heara said:
i ordered this one for my xperia z2 and i can tell you its only for scratches no protection at all, easy scratches the case, i droped my phone and my tempered glass screen protector broke( thank Good i had a screen protector)
Click to expand...
Click to collapse
Is the one from Brando that clear kinda sticky plastic "gel" material?
jhun80 said:
Anybody tried ringke?
cache=83468607623d9aec8d410b1e55df0e93&pi=SY200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1[/url]
Click to expand...
Click to collapse
This case looked to be the best. It got really great reviews for the iphone 6+, hopefully this one is built as good. I ordered it from eBay, I hope it has a descent opening to use a magnetic charger. It should be in Thursday, to bad I don't have my phone yet to try it on.
joe198219 said:
This case looked to be the best. It got really great reviews for the iphone 6+, hopefully this one is built as good. I ordered it from eBay, I hope it has a descent opening to use a magnetic charger. It should be in Thursday, to bad I don't have my phone yet to try it on.
Click to expand...
Click to collapse
Same. I'm hoping it'll fit the magnetic charger and my front and back tempered glass protectors...
jomansch said:
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
Click to expand...
Click to collapse
se1000 said:
Is the one from Brando that clear kinda sticky plastic "gel" material?
Click to expand...
Click to collapse
well its more like a protector film very thin
jhun80 said:
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
Click to expand...
Click to collapse
erasat said:
Mine was ordered on Oct. 2nd, the next day I received a Tracking Information, still today it just says Label created, when I finally could reach them they told me that they had production issues and was delayed, but the new shipping date was Oct. 24th then later another one called me (left a message earlier) and said that it was 27th, when I asked if it was the 24th or the 27th, he insisted that it was next monday, that of I wanted to keep the order they will offer me a 15% discount if not they could cancel it.
Due that I think that Ringke Fusion design is the best there is for our phones I kept it, I've been using the Fusion in my past 3 phones and are of great quality, honestly I don't know what happened to them this time as is the first time I have problems with them with an order or product.
Click to expand...
Click to collapse
The review left by the user wasn't too positive. I ordered this today on Amazon and cancelled it. :/
I finally got mine about 10 days ago, I really love it and to me it looks great, they thought of everything, it even fits the Dual Sim D6633, the left side flap fits perfectly on it, plus they thought of all the Magnetic chargers and even adapters out there so I kind of think that this is the most universal cover for our z3.
BUT, I left them a negative feedback on eBay simply because that's no way of working on the Customer service side, no responses to emails for weeks and after offering me a 15% discount if I kept the order active, I'm still waiting for them to rely to the email I sent dating yes and asking about how was I suppose to receive the credit.
EDIT: SOLD!!
Just purchased the Ringke Fusion Case, what sold it for me mostly was the cool headphone jack protection.
My previous phones have ended up getting pretty corroded in there. And after taking shots with the xperia Z3 in my pool yesterday, the headphones attached macro application, was causing the phone to go nuts as soon as water entered the jack slot.
Another nice thing which annoyed me with a similar case, is that the cutout for the lens and flash was not very big, causing horrid shots when the flash was used. This case looks to have a good space around that flash to hopefully avoid this issue.
Will keep you posted after it arrives
danw_oz said:
Just purchased the Ringke Fusion Case, what sold it for me mostly was the cool headphone jack protection.
My previous phones have ended up getting pretty corroded in there. And after taking shots with the xperia Z3 in my pool yesterday, the headphones attached macro application, was causing the phone to go nuts as soon as water entered the jack slot.
Another nice thing which annoyed me with a similar case, is that the cutout for the lens and flash was not very big, causing horrid shots when the flash was used. This case looks to have a good space around that flash to hopefully avoid this issue.
Will keep you posted after it arrives
Click to expand...
Click to collapse
I have this case and I hated it from the moment I got it. It came with a round sticker in the back. By simply trying to remove it, the case got very badly scratched. I was furious. I keep my cases 100% clean and this piece of garbage got damaged by nothing and within 2 minutes of getting it out of the packaging. I was going to return it immediately, but the other cases I bought were even worse in other aspects.
This case covers all the buttons, the MicroSD/SIM card slot, and it has a plug for the audio port. The magnetic and USB ports are not covered. I had to cut the audio plug off because it was putting too much pressure on my earphones.
The lips in front of the case give the phone some protection; they're thick in my opinion. I feel this case will protect the phone in case of a drop. It's thicker than I'd like, but it's definitely not a "thick" case. The fit is not tight at all, so I believe it won't damage or displace screen protectors. It's not going to fall off the phone, but it's not difficult to put it on at all.
This is my daily driver because I haven't been able to find anything less bad. I was looking for an ultra thin, transparent case, but this one had great reviews all over the Internet.
Rinke fusion case
android_fury said:
I have this case and I hated it from the moment I got it. It came with a round sticker in the back. By simply trying to remove it, the case got very badly scratched. I was furious. I keep my cases 100% clean and this piece of garbage got damaged by nothing and within 2 minutes of getting it out of the packaging. I was going to return it immediately, but the other cases I bought were even worse in other aspects.
This case covers all the buttons, the MicroSD/SIM card slot, and it has a plug for the audio port. The magnetic and USB ports are not covered. I had to cut the audio plug off because it was putting too much pressure on my earphones.
The lips in front of the case give the phone some protection; they're thick in my opinion. I feel this case will protect the phone in case of a drop. It's thicker than I'd like, but it's definitely not a "thick" case. The fit is not tight at all, so I believe it won't damage or displace screen protectors. It's not going to fall off the phone, but it's not difficult to put it on at all.
This is my daily driver because I haven't been able to find anything less bad. I was looking for an ultra thin, transparent case, but this one had great reviews all over the Internet.
Click to expand...
Click to collapse
True! When i got mine, i wondered why it's not as clear as I'd expected it. So i tried wiping it with my handkerchief to see if it's just some dirt or leftover adhesive from the protective film. To my shock, what i was wiping was a scratch already, and i made it even worse by rubbing it. Good thing i have the white z3 compact act so it's not too noticeable. But really disappointed with it's quality. I waited two months for this cause i live in the Philippines. Sigh. Rinke's Fusion case isn't as nice as it advertises.
UPDATE: apologies, there was a sticker on the rear panel. That's why it wasn't as clear and it easily "scratched". my phone looks okay now. Haha
You should take a look at http://aliexpress.com - it might takes 3-4 weeks to ship, but you will find literally a ton of transparent cases from 2$ (incl. shipping).
Got mine also from there - took 3.5 weeks.
Got an N6 on the way, looking for a flip case that can easily be removed. I'd like to be able to clip the phone into the case when I'm out and about, but remove it when I'm at home or at the office. Anyone have a case like this? I've done some looking but it seems like most of them are TPU cases attached to the flip cover. For my other phone I found one that clipped around the edges in only a couple of spots. I'm hoping to find something similar or at least one that can stand up to the abuse of many in/out cycles.
Might give this one a shot. It's a bit bigger than some other cases but it feels pretty nice. I will warn you though, while not a huge issue, the edges on the flip cover started to look a little frayed after a few weeks. Probably just wear and tear though.
http://www.case-mate.com/collection...cases/products/black-nexus-6-stand-folio-case
Naked Sam said:
Might give this one a shot. It's a bit bigger than some other cases but it feels pretty nice. I will warn you though, while not a huge issue, the edges on the flip cover started to look a little frayed after a few weeks. Probably just wear and tear though.
http://www.case-mate.com/collection...cases/products/black-nexus-6-stand-folio-case
Click to expand...
Click to collapse
Do you experience any of the button issues that the amazon reviewers had?
http://www.amazon.com/Case-Mate-Google-Nexus-Stand-Folio/dp/B00PIOTZ04
Not particularly, no. I will say they are not the best though. Theres a little bit of play to them. If you can get it cheaper than the 30-some odd dollars they charge, I'd go for it. Personally I usually carry my nexus 6 w/o a case just due to how nice it feels, although if you find a thinner, rubberized flip case let me know.
All in all, I'd give the casemate a shot. Does the job just fine.
I know you might have your reasons for wanting a flip case, but because I wanted to do the same as you (protection when out and about but naked when at home) I went with a really nice larger pouch case instead.
https://www.amazon.com/gp/aw/d/B015HD74YO/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1
Sent from my Nexus 6 using Tapatalk
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
bchaney16 said:
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
I've been using this inexpensive but very form-fitting case since I bought the n6. Easy to slip it out of the case, and I've used nillkin book-type cases for multiple phones. They usually last the life the phone (for me, that's about 2 years)
http://www.amazon.com/gp/aw/d/B00RJ..._SL500_SR100,100_&refRID=0G25GYGXGH6EY90F8YAQ
bchaney16 said:
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
This is the one I use, and definitely have enjoyed it. I haven't had any problem with cards scratching the screen yet.
If you're still looking for a wallet themed case, you can try out this one by VENA, I have had it for 2 months and it's been great.
http://www.amazon.com/Google-Nexus-...8&qid=1449112949&sr=1-4&keywords=vena+nexus+6
I like my phones naked or as close as it comes (ultra thin transparent tpu case), but I also like to have something to put it in when out and about. My Nexus 5 was kept in a Mofi Kangaroo pouch case which was great. Unfortunately, they seemed to have stopped making them and only ever made them just about big enough for the N5. There are similar alternatives but none seem as good as the Mofi.
So, finding a removable pouch type case big enough for this beast is a challenge! I ordered a hand made fabric one from etsy which is well made, but at the size of the device, looks more like a small sleeping bag than the home of a sleek Nexus device .
So I took a bit of a gamble and ordered something not designed for the Nexus 6. Its primary advertising is for the Iphone 6+, but also states is suitable for Note 4. Looking at both devices dimensions, I concluded it was almost big enough. The Nexus being little longer, thicker and wider than both devices, but not much.
It seems to have paid off. Its a very nice luxurious pouch wallet case in genuine brown leather from what I gather is a brand owned by tuffluv. You can't tell from the site, but the phone pouch part on the side, top and bottom is elasticated so happily accommodates the Nexus's superior girth!
I can even squeeze it in with tpu case - just, but its a bit tough to pull out. Might have to seek an ultra thin tpu case - any recommendations? Without the TPU, its next to perfect! Fully loaded with cards in the card slots makes it slightly tighter to close fully, but still very acceptable in my book.
Currently its in the sale on Tuffluv site where its claimed to be a £50 case (and going by the other similar cases going for in excess of £50, I believe them!). With the sale price and discount it came to £17.99 delivered.
Just thought I'd share in case anyone else was looking for something similar but hadn't found anything labelled as suitable for the Nexus 6.
Can't paste a link but go to tuff-luv dot coms site and search for "Alston Craig Vintage Genuine Leather Wallet Case Cover Pouch for Apple iPhone 6 Plus / 6s Plus / Samsung Galaxy Note 4 - Brown"
Alston Craig have their own site, but there is a discount code for a couple of quid off on tuff-luv
Hope this helps someone.
Oh, ps, there is a small slip of paper in the packaging that states you should have a screen protector fitted to protect the screen before use. Its material lined; not the soft microfibre type, but not something I would be concerned about.
pps. Only issue I've found is the elastic straps are centred, so covers headphone and usb port. Shame, not a deal breaker for me.
http://www.carved.com/satellite
These are quite beautiful and almost remind me of Earth wallpapers....Wonder how it works with QI charging?
A little on the pricey side, but if anyone has one, can you give me your thoughts?
This is interesting to me. I just came across these last night. They simply look amazing. I am curious about this too! Hopefully someone else can chime in!
Looks kinda nice from photos but no matter what it looks like, i can't justify the price for a thin layer of wood covered in plastic for frickin 50$.
Since nobody has chimed in yet and I received mine today (was shocked that Amazon used USPS Sunday Delivery) I will say a few words about my initial impression. First of all, I did not get that custom $50-ish dollar one linked in the OP even though I thought it was very pretty, I just bought one of the standard ones.
So here are my impressions so far:
1. It is a relatively thick case as it makes the phone's back almost completely flat and it has to allow for the thickness of the wood.
2. How the top, bottom, and buttons are somewhat exposed, it reminds me of the Spigen "Thin Fit" case (aside from the thickness).
3. Because I did not get a single solid wood finish, the inlay (bike in my example) is not completely flush with the main wood background. It is slightly recessed.
4. I generally do not use a Qi charger but I placed it on my Incipio Ghost 100 pad and it "seems" that it is a little pickier about placement compared to my Ringke Fusion case most likely because the phone is much higher off the charging pad (so to speak). But as I said, it seems like it to me. I could be wrong. I do not have a triple coil pad handy, but I'm guessing if you have a triple coil Qi pad, this will have no issues with alignment of the phone's charging coil.
5. It fits my Kenu Airframe+, barely. This was the most important factor for me. However, because the buttons are recessed, it doesn't matter where the Airframe+ sits on the phone.
I have attached some photos (please excuse the dust and lint as my camera's macro mode loves to focus on that) and an Ampere screenshot. Hope it helps a little.
I like the ship case made from 18th century naval timbers. But $50+ for a case is not in my budget right now.
While I do not have one of their cases. The company I work for owns the building that Carved is in. I work maintenance and am over at the building fairly often to work in the half of the building we occupy. The people that work there are really nice and have some awesome equipment. Really top notch products.
Sent from my Nexus 6 using Tapatalk
@buzzwyzr sweet case, how much was it?
I purchased a oneplus 6t a few weeks ago and am now looking for a case with a built in magnetic ring. I have a magnetic mount that I really like using and after my last flight I decided I really want something that can prop my phone up. Funny how little things made me change my mind about the screen size and having a kickstand of sorts. Anyways, I've been looking on Amazon and all the cases I see look like clones of each other and the ones that people review on mention how it is flimsy, provides poor protection and the ring breaks after 4 days. Also the text, auto focus and ultimate experience really turn me off on getting the case.
Currently I'm using the case that came with the phone and I put a ailun magnetic keyring in the back but the bump is starting to annoying me when I place the phone down. Any suggestions?
https://www.aliexpress.com/item/Nil...ll-Back-Cover-for-OnePlus-6T/32890232367.html
I ordered the one you're talking about. Comes in next week. I'll try and remind myself to post back to here with my results.
jmsdvs said:
I ordered the one you're talking about. Comes in next week. I'll try and remind myself to post back to here with my results.
Click to expand...
Click to collapse
Yes, I also ordered that same one from Nillkin through Giztop last week or so .along with their H+Pro screen protector. Hopefully, it will be worth the wait if it ever gets here that is.I will be sure to post my opinions once I get it.
Hope you guys aren't disappointed when you get them. I was looking at possibly getting them, but noticed the case is for the OP6, not 6T. And if you look at the title/description, it says 6, and later 6T, very inconsistently.
https://www.ebay.com/itm/Nillkin-Sy...sh=item260afcf8ca:g:io8AAOSw5wFb-KiG&LH_BIN=1
I ordered my case from ebay, has not arrived yet but the seller is trusted. I have purchased all my cases from the same buyer, takes 2 weeks to get in Finland. And this one is for the 6T, not the 6.
The same casemodel for LG G6 was total rubbish, very flimsy and cheap. But if the pictures are right, this one is totally different. I guess it depend from the shape and size of the phone.
Ok, I've had it on for a couple days now. I actually like it. I can see how it may not provide much protection to glass as the edges are pretty even with the glass. I used to have Loopy case and this is pretty similar. The ring on the back appears to be taped on with 3m tape, but pretty sturdy nonetheless. Works on my magnetic mounts as well. For the price, I say it was worth it for now. The oem case went over the glass too much making the edge difficult to access. Gonna stick with this case.