Related
Okay I ran the s-off tool last week and had success . Then I decided to get off the ics leaked firmware and revert to the gb firmware.
I began experiencing issues with both my wifi and data disconnecting after a period of time. I have tried running the ruu in a exe and zip format and neither have fixed the problem. I also have tried doing a factory reset and clear storage from hboot immediately after the ruu was installed. No luck.
Not sure what the problem is here. Lol. I haven't seen anyone having problems going from ics back to gb. Am I missing something?
cincyelite22 said:
Okay I ran the s-off tool last week and had success . Then I decided to get off the ics leaked firmware and revert to the gb firmware.
I began experiencing issues with both my wifi and data disconnecting after a period of time. I have tried running the ruu in a exe and zip format and neither have fixed the problem. I also have tried doing a factory reset and clear storage from hboot immediately after the ruu was installed. No luck.
Not sure what the problem is here. Lol. I haven't seen anyone having problems going from ics back to gb. Am I missing something?
Click to expand...
Click to collapse
Hmm, I just finished reading the whole post, everyone else seemed to be fixed by doing the factory reset and clear storage. I reverted and haven't had any issues, granted I am just in 3g land so don't think 3G was an issue . Is it a problem while on the stock rom or just when you flash a custom rom ?
You shouldn't post your issue twice
Sent from my ADR6425LVW using Tapatalk 2
I'm running stock and the weird thing is that my data icon goes away but in settings it has it marked like it is on.
cincyelite22 said:
I'm running stock and the weird thing is that my data icon goes away but in settings it has it marked like it is on.
Click to expand...
Click to collapse
That's because the radio is on, but just because the radio is on doesn't mean you have a data connection.
Isn't there a known issue with flashing back to GB firmware and losing data?
tekhna said:
That's because the radio is on, but just because the radio is on doesn't mean you have a data connection.
Isn't there a known issue with flashing back to GB firmware and losing data?
Click to expand...
Click to collapse
Some have reported it , but he attempted the fix already and is saying it still isn't working. I am really not sure what else you could try other than running the RUU again, then trying to factory reset and clear storage.
I think I found the problem. My bootloader was unlocked.
cincyelite22 said:
I think I found the problem. My bootloader was unlocked.
Click to expand...
Click to collapse
That wouldn't mess with data what so ever
Sent from my ADR6425LVW using Tapatalk 2
superchilpil said:
That wouldn't mess with data what so ever
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
That would make issues with the ruu fully flashing though wouldnt it? I relocked before doing the fix.here and im working great
Sent from my ADR6425LVW using Tapatalk 2
I fixed it by doing what I did above, but flashing the eng hboot first.
Hopefully I can get some help from you guys I'm currently on hboot 1.12 HTC devunlock and I'm running TWRP 2.2.1. I tried flashing CMX but I get "unfortunately phone isn't responding" right after that it says the UI isn't responding and the dialog boxes keep appearing. So I can't get past the lock screen. I've already tried wiping and reflashing and it didn't help. Any help would be appreciated.
gespinal0301 said:
Hopefully I can get some help from you guys I'm currently on hboot 1.12 HTC devunlock and I'm running TWRP 2.2.1. I tried flashing CMX but I get "unfortunately phone isn't responding" right after that it says the UI isn't responding and the dialog boxes keep appearing. So I can't get past the lock screen. I've already tried wiping and reflashing and it didn't help. Any help would be appreciated.
Click to expand...
Click to collapse
IF S-ON = True:
Then you have to flash the boot.img kernel file via fastboot. I would also try downloading the ROM file again and double checking MD5 just in case.
IF S-OFF = True:
Download the ROM again and check the MD5, make sure you wipe the hell out of your phone, and if your coming from another ROM or Stock, don't recovery any Nandroid info, you should have to reinstall your apps or recover via MyBackup or Titanium Backup (app + data, no system apps).
megabiteg said:
IF S-ON = True:
Then you have to flash the boot.img kernel file via fastboot. I would also try downloading the ROM file again and double checking MD5 just in case.
IF S-OFF = True:
Download the ROM again and check the MD5, make sure you wipe the hell out of your phone, and if your coming from another ROM or Stock, don't recovery any Nandroid info, you should have to reinstall your apps or recover via MyBackup or Titanium Backup (app + data, no system apps).
Click to expand...
Click to collapse
I thought it was only if you had updated to 1.15 for the hboot that you have to flash the bootimg..... nvm ill try it once i get home
Definitely sounds like you might have a bad download. Also download the superwipe zip and use that too. With hboot 1.12 you should be fine to flash without any special procedures.
Sent from my EVO using xda premium
A known issue in CMX is that phone process will crash, it does this while the phone searches for a signal, once a signal is found it should stop. Just try waiting it out, it doesn't really affect anything, once the message is gone you will be fine
durandetto said:
Definitely sounds like you might have a bad download. Also download the superwipe zip and use that too. With hboot 1.12 you should be fine to flash without any special procedures.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
om4 said:
A known issue in CMX is that phone process will crash, it does this while the phone searches for a signal, once a signal is found it should stop. Just try waiting it out, it doesn't really affect anything, once the message is gone you will be fine
Click to expand...
Click to collapse
i tried the bootimg and i still had the same problem, but ill try waiting it out
megabiteg said:
IF S-ON = True:
Then you have to flash the boot.img kernel file via fastboot. I would also try downloading the ROM file again and double checking MD5 just in case.
IF S-OFF = True:
Download the ROM again and check the MD5, make sure you wipe the hell out of your phone, and if your coming from another ROM or Stock, don't recovery any Nandroid info, you should have to reinstall your apps or recover via MyBackup or Titanium Backup (app + data, no system apps).
Click to expand...
Click to collapse
That is only for HBOOT 1.15 and up. HBOOT 1.12 allows for flashing of kernel from recovery with S-ON.
When you say you tried "wiping and reflashing", what exactly did you wipe? You should do a factory reset, then wipe data, system, cache, and dalvik. Then flash the ROM.
bilbo524 said:
That is only for HBOOT 1.15 and up. HBOOT 1.12 allows for flashing of kernel from recovery with S-ON.
When you say you tried "wiping and reflashing", what exactly did you wipe? You should do a factory reset, then wipe data, system, cache, and dalvik. Then flash the ROM.
Click to expand...
Click to collapse
Im running Viper4g on my evo lte 4g its a sense based rom i wipe the system, then dalvik cache, and cache. Ill try the factory reset now.
gespinal0301 said:
Im running Viper4g on my evo lte 4g its a sense based rom i wipe the system, then dalvik cache, and cache. Ill try the factory reset now.
Click to expand...
Click to collapse
Don't forget data too
One user kept corrupting his phone with a backup of user data, I don't know how or where he got the relevant knowledge to obtain just an image apps and user data but it was corrupt and he stuck himself in an endless cycle of reformat and reflash apps and data. A human boot loop lol I was thinking about adding it to the troubleshooting guide but what are the odds that someone who doesn't know what they are doing will create a zip install of backed up data (or fail really since it is corrupt) and flash it *looks around in baited breath* well OK then
Well i think the factory reset worked now i get a not so frequent dialog saying process.phone.android has stopped. Should i reflash or just wait it out? lol
I would wait it out
I had this exact same problem. My issue was I had flashed a modified mail app that got rid of the Exchange Security Lock. Once I factory reset I was fine. When I tried flashing that Mail app again, I got the same Phone has quit error over and over.
gespinal0301 said:
Well i think the factory reset worked now i get a not so frequent dialog saying process.phone.android has stopped. Should i reflash or just wait it out? lol
Click to expand...
Click to collapse
That is a known issue with CM10. Phone process will force close upon boot until you get a signal. Once you get a signal, it will be fine, and not happen again until you reboot.
xuohtx said:
I had this exact same problem. My issue was I had flashed a modified mail app that got rid of the Exchange Security Lock. Once I factory reset I was fine. When I tried flashing that Mail app again, I got the same Phone has quit error over and over.
Click to expand...
Click to collapse
I didn't use titanium backup the Play Store just started installing everything I needed which was why I thought it was weird. Everything is working great so far. Thanks to everyone for their input and help.
Google market back up has been a long time feature. Its just that OEMS won't include it or for some reason disable it. Every HTC Android phone I have own has asked permission for Google market back up but upon factory reset or flash, sense will disable it the automatic restore
bilbo524 said:
That is a known issue with CM10. Phone process will force close upon boot until you get a signal. Once you get a signal, it will be fine, and not happen again until you reboot.
Click to expand...
Click to collapse
I also get the force close of the phone when I toggle airplane mode. Sometimes it doesn't stop and I have to reboot.
Sent from my EVO using Tapatalk 2
bilbo524 said:
That is a known issue with CM10. Phone process will force close upon boot until you get a signal. Once you get a signal, it will be fine, and not happen again until you reboot.
Click to expand...
Click to collapse
echo....echo...echo..nah I kid, just a bit bored haha
Basically when I tested the miui jb Rom and nandroided back my data went into roaming mode. I cannot get sevice on my phone and I don't know what to do. Help would be appreciated.
Assuming you've already looked at your network settings and ensured those are right.
Are you s=on and forgot to flash your kernel back?
I had an issue pop up like this on my rezound and had to take it to Verizon, no amount of ruu'ing or factory resetting helped, hope you don't have that issue!
You have to flash the stock recovery and do a factory reset. It will wipe your data and internal memory so back it up.
Sent from my Nexus 7 using xda app-developers app
what ROM are you using? If its an AOSP based ROM, try setting the phone mode to CDMA only, then go back to GSM/CDMA/WCDMA/LTE and you should go back to normal.
a.mcdear said:
what ROM are you using? If its an AOSP based ROM, try setting the phone mode to CDMA only, then go back to GSM/CDMA/WCDMA/LTE and you should go back to normal.
Click to expand...
Click to collapse
No i'm running Newts One xxx. I have already tried switching the network settings to no avail. My phone is also s off so it's not a kernel problem. Gonna try the factory reset from stock recovery and see what happens.
quitoxic said:
No i'm running Newts One xxx. I have already tried switching the network settings to no avail. My phone is also s off so it's not a kernel problem. Gonna try the factory reset from stock recovery and see what happens.
Click to expand...
Click to collapse
I know thats what fixes it since thats what happened to me when i used an early build of siuls miui JB.
I'm on my second DNA I moonshined both phones and a week ago I flash the cm10.1 and had no data ie. Couldn't make a call couldn't text. Internet and everything worked after flashing cm10.1 it stuck on the first screen the "activating" screen so I flashed my backup which is the ROM it comes with out the box. And had no data there also.. Android 4.1.1. Sense 4.1+. Verizon exchanged my phone lucky for me. So i moonshined again and s-off and rooted. But scared to flash again in case this happens again. Coming from gs2, galaxy nexus and gs3 I haven't had to mess with bootloader at all. I guess where I'm going is what do I do if this happens again. I see a option to reset from boot loader? Will that fix the issue if it happens again. Is there something I'm missing before flashing?? I want to flash newtoroots sense 5 ROM just scared. If someone can provide some info on where o went wrong gladly appreciate it.
Sent from my HTC6435LVW using Tapatalk 2
swiftinmotion said:
I'm on my second DNA I moonshined both phones and a week ago I flash the cm10.1 and had no data ie. Couldn't make a call couldn't text. Internet and everything worked after flashing cm10.1 it stuck on the first screen the "activating" screen so I flashed my backup which is the ROM it comes with out the box. And had no data there also.. Android 4.1.1. Sense 4.1+. Verizon exchanged my phone lucky for me. So i moonshined again and s-off and rooted. But scared to flash again in case this happens again. Coming from gs2, galaxy nexus and gs3 I haven't had to mess with bootloader at all. I guess where I'm going is what do I do if this happens again. I see a option to reset from boot loader? Will that fix the issue if it happens again. Is there something I'm missing before flashing?? I want to flash newtoroots sense 5 ROM just scared. If someone can provide some info on where o went wrong gladly appreciate it.
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
If this happens you can try the reset from bootloader but of that doesnt work you'll have to do revones return to stock method. There's a thread. Pretty much flashes the RUU (stock everything) and flash stock bootloader. Its not hard. I did this the other day to put my phone back to stock for my replacement.
Sent from my HTC6435LVW using xda app-developers app
swiftinmotion said:
I'm on my second DNA I moonshined both phones and a week ago I flash the cm10.1 and had no data ie. Couldn't make a call couldn't text. Internet and everything worked after flashing cm10.1 it stuck on the first screen the "activating" screen so I flashed my backup which is the ROM it comes with out the box. And had no data there also.. Android 4.1.1. Sense 4.1+. Verizon exchanged my phone lucky for me. So i moonshined again and s-off and rooted. But scared to flash again in case this happens again. Coming from gs2, galaxy nexus and gs3 I haven't had to mess with bootloader at all. I guess where I'm going is what do I do if this happens again. I see a option to reset from boot loader? Will that fix the issue if it happens again. Is there something I'm missing before flashing?? I want to flash newtoroots sense 5 ROM just scared. If someone can provide some info on where o went wrong gladly appreciate it.
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
Sometimes That happen when a Rom like a JB 4.2.2 required to wipe the System in addition to the normal wipe/factory reset. so if you tried
to activate the phone which you already have activated (most skipp activation) the SIM Card reset (someone else said fry) and your location and phone number get lost. so RUU fix all the troubles, but now you can safe flash NOS 4.1.2 very stable normal wipe. is good idea keep in your computer a Stock Restore Backup file. Reset from Custom Recovery won't fix the issue, has to be from Stock Recovery.
http://teamw.in/androidmultiuser
http://forum.xda-developers.com/showthread.php?t=2293919&highlight=flash+radio
Based on the info you gave none of your issues should be caused by the boot loader or moonshine, sounds like a ROM side or kernel side issue. The radio mode may have been switched when you flashed Roms. It should be on CDMA/LTE when on Verizon and WCDMA/GSM when on gsm/Sim. Not sure how APN settings are managed within CM non gsm im not sure there is even an option to edit them. These settings (radio/apns) deal with how the phone connects to the network. Voice and text should provision automatically on stock android, not sure how to manually provision. On Sense based Roms as long as a compatible version of EPST is running one can use special dialer codes to manually provision the phone for connectivity as well as access other helpful settings. From sense *#*#4636#*#* would be the code to reach the Phone Information containing the radio mode switch I mentioned previously.
Thanks for the replies guys. Yeah on jb4.2.2 that activating screen is usually passed right by for a quick second bit some how my phone got stuck on that screen. Oh well its rattled me to the point of not flashing lol. Just rocking nova launcher with some icon packs. Might try sense 5 ROM tonight. Wish me luck! Lmao
Sent from my HTC6435LVW using Tapatalk 2
d08speed3 said:
If this happens you can try the reset from bootloader but of that doesnt work you'll have to do revones return to stock method. There's a thread. Pretty much flashes the RUU (stock everything) and flash stock bootloader. Its not hard. I did this the other day to put my phone back to stock for my replacement.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
If it happens again go into boot loader and just do the reset option? Is that it do I need to have anything else? Thanks again for the reply
Sent from my HTC6435LVW using Tapatalk 2
Take out the sim card and re-insert it.
orangechoochoo said:
Take out the sim card and re-insert it.
Click to expand...
Click to collapse
Wasn't a Sim card problem.
Sent from my HTC6435LVW using Tapatalk 2
Some Info
swiftinmotion said:
Wasn't a Sim card problem.
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
RUU (after Stock Phone Reset) is the only way to Recovery from this, this happen to me once, what happen
-Operator Network Change (u can only have Internet)
-APN Setting Doesn't matter if you change it a least it be edited . Unknown Network and Mobile/network type unknown
-Phone Info state Phone number 0000000000 Zeros, Min Unknown, PRL 00000, Meid zeros,
-Restore from you back up out the box: does not work or doesn't restore Call and Text ( this is the problem) Phone doesn't know your location
then u are having internet only 4g like in a Roaming State.
-Flash or push new Rom same Doesn't restore (call/text)
-Factory reset from a custom Recovery Doesn't restore as well
to skip the activating screen you can touch the four corners of the screen in this order
top left
top right
bottom right
bottom left
this will bypass the activating screen
once you're in the rom in cdma subscription change it to the other setting, I stopped using that rom so i cant lead you through it
the aosp roms made my screen flicker so i went back to sense 5
good luck
finanandroid said:
RUU (after Stock Phone Reset) is the only way to Recovery from this, this happen to me once, what happen
-Operator Network Change (u can only have Internet)
-APN Setting Doesn't matter if you change it a least it be edited . Unknown Network and Mobile/network type unknown
-Phone Info state Phone number 0000000000 Zeros, Min Unknown, PRL 00000, Meid zeros,
-Restore from you back up out the box: does not work or doesn't restore Call and Text ( this is the problem) Phone doesn't know your location
then u are having internet only 4g like in a Roaming State.
-Flash or push new Rom same Doesn't restore (call/text)
-Factory reset from a custom Recovery Doesn't restore as well
Click to expand...
Click to collapse
This Sucks Verizon actually exchanged my phone In store considering I don't know how to ruu or what that is I haven't flashed anything on this new phone to afraid of the same **** happening again. Damn! Is this a cm10.1 thing? Or a android 4.2.2 thing? Is it safe flashing sense based roms ? This is kind of a nightmare for me not flashing anything.
Sent from my HTC6435LVW using Tapatalk 2
hyphydragon said:
to skip the activating screen you can touch the four corners of the screen in this order
top left
top right
bottom right
bottom left
this will bypass the activating screen
once you're in the rom in cdma subscription change it to the other setting, I stopped using that rom so i cant lead you through it
the aosp roms made my screen flicker so i went back to sense 5
good luck
Click to expand...
Click to collapse
Was reading around right now seems like other people having same issue I had on cm10.1 and cm10.2.. Think it's safe to flash a sense 5 rom?? Or the same **** happening? Should of just stuck to my gs3 is what it seems =(
Sent from my HTC6435LVW using Tapatalk 2
swiftinmotion said:
This Sucks Verizon actually exchanged my phone In store considering I don't know how to ruu or what that is I haven't flashed anything on this new phone to afraid of the same **** happening again. Damn! Is this a cm10.1 thing? Or a android 4.2.2 thing? Is it safe flashing sense based roms ? This is kind of a nightmare for me not flashing anything.
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
You can safe flash NOS_m7_v3.0.2_VZW_zip , if you have TWRP recovery, just wipe normal factory reset, don't do advanced/ system wipe as most guys recommended, never wipe Storage phone people get stuck without OS because erase everything . I Flashed doing just factory reset on TWRP. I recommend wait for AOSP Rom get most stables soon coming leaks from official Verizon Wireless for the DNA/One. sense /GPE edition
RUU is the Factory image /setting original HTC/Verizon for DNA so when you RUU it revert anything to factory out the box phone
The RUU thing you have to read this thread : http://forum.xda-developers.com/showthread.php?t=2293919&highlight=flash+radio
Edit: Remember do always a nandroid Back up first before flash any Rom so you can easy restore your original Rom if something goes wrong.
additional I keep a Original Back up on my Computer.
finanandroid said:
You can safe flash NOS_m7_v3.0.2_VZW_zip , if you have TWRP recovery, just wipe normal factory reset, don't do advanced/ system wipe as most guys recommended, never wipe Storage phone people get stuck without OS because erase everything . I Flashed doing just factory reset on TWRP. I recommend wait for AOSP Rom get most stables soon coming leaks from official Verizon Wireless for the DNA/One. sense /GPE edition
RUU is the Factory image /setting original HTC/Verizon for DNA so when you RUU it revert anything to factory out the box phone
The RUU thing you have to read this thread : http://forum.xda-developers.com/showthread.php?t=2293919&highlight=flash+radio
Edit: Remember do always a nandroid Back up first before flash any Rom so you can easy restore your original Rom if something goes wrong.
additional I keep a Original Back up on my Computer.
Click to expand...
Click to collapse
I use clockworkmod safe to use? Never used twrp. And I always make a back up that's what's weird. When I flashed cm10.1 and it couldn't activate thought it was odd so I flashed my back up and that was affected also no activation. Anyways. So your saying if I flash something to wipe data/factory reset but don't go into advanced? Just wipe dalvik?
Sent from my HTC6435LVW using Tapatalk 2
swiftinmotion said:
I use clockworkmod safe to use? Never used twrp. And I always make a back up that's what's weird. When I flashed cm10.1 and it couldn't activate thought it was odd so I flashed my back up and that was affected also no activation. Anyways. So your saying if I flash something to wipe data/factory reset but don't go into advanced? Just wipe dalvik?
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
I don't use CWM by now, but just do data/factory reset and dalvik as well.
Hello!
First things first, I have searched the internet, not just XDA, far and wide for these problems. I have followed nearly every lead I could find before creating a post about this, I am at wits end and at this point have had to remove the phone from the premises before something bad happened to it.
My problems:
"Switch to Global mode" constantly pops up"
Cannot send or receive either texts nor phone calls
Setup:
Previously on CleanRom 3.5, decided to try CM10.2. Downloaded and installed CWM to use instead of TWRP, downloaded CM10.2, wiped cache, factory reset, installed CM10.2 zip file as well as Gapps for 4.3. CM10.2 exhibited the above behavior. Currently I am sitting on completely stock JB 4.1.2, the details are below.
Network: Unknown
Mobile Network type: Unknown:0
Service State: Out of service
Mobile Network State: Disconnected
Phone number: <correct #>
IMEI: <correct IMEI, validated per inside battery cover>
Android 4.1.2
Baseband: I605VRAMC3
Kernel: 3.0.31-1098177
[email protected]#1
SMP PREEMPT Fri Mar 29 10:58:51 KST 2013
Build Number: JZO54K.I605VRAMC3
Hardware Version: I605.06
Mitigation attempts:
Downgrade to CM10.1 (AOSP keyboard would not work)
Tried various AOSP and TW ROMs, to no avail.
Cleared cache, dalvik cache and factory reset between each attempt
Finally downloaded stock ROM, followed steps here (great guide btw!) using Odin, no change.
I truly don't know what else to do at this point. I feel like I've done everything I've seen and my problems are still around. I see a lot about IMEI (not sure what it is or what it does), but mine is present and has been throughout this ordeal. Occasionally my phone number would read as 000-000-3279, which was not correct, but that was only on the CM ROMs. Any help with this would be greatly appreciated, I don't want a Note 2 paper weight or media device hanging around, I want my phone back - stock form is fine. Thank you for reading all this and I appreciate any help that can be sent my way.
I am in this exact situation.
Was on stock, VRAMC3 and wanted to go custom.
The CASUAL exploit worked just fine, and once I had CWM I attempted to flash CM 10.2.
It just didn't seem right.
Every other ROM I've tried since that point I am unable to send/receive texts, and get the Global mode popup constantly.
I tried to revert back to stock via this thread: http://forum.xda-developers.com/showthread.php?t=2024207 But no luck.
Any help would be appreciated.
I ran into this last night while trying a new rom(coming from Beans 22). I can't call or receive calls. I can receive texts, but can't send them. Data works. I've tried multiple ROM's, and it's the same situation with each(CM10.2, 10.1, XenonHD). I just tried returning everything to stock with Odin, and continue to have the same issues. My phone number reads as 000-000-2780. My IMEI is correct. Service State: Out of service. If I switch to CMDA/LTE, I get hammered with "switch to global mode" popups. If anyone has any suggestions, please post them.
I had LTE and wifi when this happened to me, so I was able to download Telinfo from Play.
Also, I had ODINed back to Root66 so all the hidden menu options were available.
Your modem needs to reset, so go into device info and turn off your radio. Toggle to LTE/CDMA/EvDo and then turn radio back on.
I don't remember if a reboot was necessary.
My modem was fine after that.
Let me know if this works for you.
Sent from my SCH-I605 using XDA Premium 4 mobile app
pdinphx, I just toggled the radio using "ServiceMode Shortcut" and did a factory reset afterwards. It worked! Thanks!!!!
ap0ptosis said:
pdinphx, I just toggled the radio using "ServiceMode Shortcut" and did a factory reset afterwards. It worked! Thanks!!!!
Click to expand...
Click to collapse
hi.. same thing happened to me. Was trying different roms coming from Beans22, lost ability to make/receive calls but data connection was fine.
Questions:
Did you have to change rom back to factory stock before doing the radio toggle thing?
What is "ServiceMode Shortcut"?
Thanks much!
wutek, I did change back to factory stock before I did the radio toggle, but I think you can do it from whatever rom you flashed to. "ServiceMode Shortcut" is an app from the store that allows you to access the service mode menu. After installing it, go to testing>device information, and reset the modem from there as pdinphx advised. Good luck!
Having the same problem. Flashed 10.2 last night from cm11, didn't make a call just went to bed and woke up and had this problem. Tried using that app from 10.2 without any luck unless I am doing something wrong. I guess I am gonna try after using Odin. Anyone else having any luck?
Sent from my GT-P3110 using xda app-developers app
ap0ptosis said:
wutek, I did change back to factory stock before I did the radio toggle, but I think you can do it from whatever rom you flashed to. "ServiceMode Shortcut" is an app from the store that allows you to access the service mode menu. After installing it, go to testing>device information, and reset the modem from there as pdinphx advised. Good luck!
Click to expand...
Click to collapse
hi ap0ptosis,
quick update... I was able to regain radio after odin to root66, toggle using telinfo, factory reset. Thanks for the info on the ServiceMode Shortcut app.
To all.. thanks for the help... I am back and kicking. However, I am now staring at the big elephant in the room so have to ask the question... how did this all of the sudden start to happen? It started for me when I tried out some 4.3 Roms but radio going bonkers did not happen immediately. For me it happened overnight w/o me touching anything. The message I would continuously get is "Mobile network not available" . Also phone would keep asking to switch to global mode.
wutek said:
hi ap0ptosis,
quick update... I was able to regain radio after odin to root66, toggle using telinfo, factory reset. Thanks for the info on the ServiceMode Shortcut app.
To all.. thanks for the help... I am back and kicking. However, I am now staring at the big elephant in the room so have to ask the question... how did this all of the sudden start to happen? It started for me when I tried out some 4.3 Roms but radio going bonkers did not happen immediately. For me it happened overnight w/o me touching anything. The message I would continuously get is "Mobile network not available" . Also phone would keep asking to switch to global mode.
Click to expand...
Click to collapse
Glad you got yours going. When using root 66 do I still need to use the pit file alongside? Have the 66 downloaded but never used it.
Sent from my GT-P3110 using xda app-developers app
mikelikesbikes said:
Glad you got yours going. When using root 66 do I still need to use the pit file alongside? Have the 66 downloaded but never used it.
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
hi mikelikesbikes.. I followed the exact instructions from the below url. So definitely, I used pit. Good Luck
http://forum.xda-developers.com/showthread.php?t=2024207
Have Odin running as I type using root 66 and the pit. How does one reset the radio from the playstore app? I see how to turn off the radio and change radio but not how to reset it. Obviously it is staring me in the face.
Sent from my GT-P3110 using xda app-developers app
So I got it going. Used the root 66 file and didn't have a operating system to boot into, only cwm recovery which was weird. So I used Odin and went back completely stock, and ran that app from the play store. Still didn't work until I factory reset from within settings and that was what got it I suppose. I wonder also what caused it and why others had the same issue on the same morning. Like I said previously I was running 4.4 for a few days and went back to 4.3. That's the only thing I did differently. Anyway, ran Casual, and running Beans 22 and happy.
Sent from my GT-P3110 using xda app-developers app
mikelikesbikes said:
So I got it going. Used the root 66 file and didn't have a operating system to boot into, only cwm recovery which was weird. So I used Odin and went back completely stock, and ran that app from the play store. Still didn't work until I factory reset from within settings and that was what got it I suppose. I wonder also what caused it and why others had the same issue on the same morning. Like I said previously I was running 4.4 for a few days and went back to 4.3. That's the only thing I did differently. Anyway, ran Casual, and running Beans 22 and happy.
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
Hi mikelikesbikes,
Glad u got it working again. Interesting... I did read somewhere that root66 may not work and if so, to use vz stock.
Correct, factory reset is within the phone>settings>backup reset menu... cheers
Not sure why this happens but I had the same thing happen to me. I tried cm11 and then switched to cm10 after switching back to tw rom I was in roaming only. A simple factory reset took care of the issue. So I think the common denominator here is the series of events cm11 to cm10 to touchwiz....
Sent from my SCH-I605 using Tapatalk
I had this problem coming from stock MC3 --> Root/Unlock --> CM 10.2
No calls / SMS on 10.2, and still nothing coming back to stock MC3.
You guys saved my ass, thanks! Toggling the radio / factory restore worked for me.
Anyone know what ROMs are SAFE to use without this issue appearing?
Back to normal, whew!
I had been stable on cm10.2 nightlies as of 11/29 with mc3. Installed cm11 everything was operational. I was able to bounce back and forth between my backups. As soon as I updated to the newest nightly for cm10.2, 12/1, that broke my voice/sms.
Ended up reverting back to stock, factory reset from settings in stock and was back up and running.
From here I used casual and tried to go back to the 12/1 nightly and still had the same issues.
Repeated stock process/casual and am now on slimrom 4.3 mc3 and running smoothly. Just wanted to get my problems and solution out there for more info.
This was a fairly common problem with the S3.
The key to fixing it is not in the factory reset but in the reprovisioning of the phone's modem, which typically requires a stock rom to access Samsung's hidden service menu.
Incidentally, even a touchwiz rom built off another carrier's base (or international base) can trigger this problem.
Sent from my SCH-I605 using XDA Premium 4 mobile app
N_Jones said:
Not sure why this happens but I had the same thing happen to me. I tried cm11 and then switched to cm10 after switching back to tw rom I was in roaming only. A simple factory reset took care of the issue. So I think the common denominator here is the series of events cm11 to cm10 to touchwiz....
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Agreed. Never had this problem before (thankfully). Think it's odd though several people had the same issue on the same morning.
Sent from my GT-P3110 using xda app-developers app
Same Issue
I'm running into the same issue as ya'll. Flashed CM 10.2, than flashed back to CleanRom 3.5 and not able to make calls or send text. Can receive text and all incoming calls go to Voicemail. I ODIN back to stock VRALJB, can't seem to get phone going again. Tried toggling Radio and Factory Data reset, but now the phone is just stuck in Roaming Mode. Any help?